How to restart adpatch interactively

Hi All,
I am in the process of upgrading my EBS 11.5.10.2 to 12i.
Currently applying patch 6678700,I started the patch with 48 workers...
Now the server seems to be hung and all workers except 1 is in waiting state.
One worker is running ap_holds_all.xdf for 2+ hrs now.
Is there a way to restart the adpatch,with less no.of workers?
If I stop the patch and restart it with  "continue from previous AutoPatch session" option,it's not asking for no.of workers.
Is it safe to stop the patch and re-apply without continuing from previous session?
Any help is highly appreciated...
My Env:
DB:11.1.0.7
OS:Solaris 10
Thanks in advance....

Currently applying patch 6678700,I started the patch with 48 workers...
Now the server seems to be hung and all workers except 1 is in waiting state.
One worker is running ap_holds_all.xdf for 2+ hrs now.
How many CPUs do you have on this box? Please make sure not to go above 1-1.5 * Number of CPUs
Is there a way to restart the adpatch,with less no.of workers?
If I stop the patch and restart it with  "continue from previous AutoPatch session" option,it's not asking for no.of workers.
No.
Is it safe to stop the patch and re-apply without continuing from previous session?
Yes.
Thanks,
Hussein

Similar Messages

  • How to restart services?

    hi,
    we are using hyperion 11.1.1.3 version which is installed in linux server?Can anyone tell me how to restart the shared services server like we do in windows version...n 1 more question..
    how to start interactive reporting and financial reporting from linux server?if possible can u give me the path(example)
    Thanks in advance...

    Hi,
    If you want to stop and start all the services, (I am assuming the Hyperion Home, check as per ur HYPERION_HOME)
    Go to:
    1) /Hyperion/products/bin
    2) you will find stop.sh and start.sh
    If you want to start a specific service: (Assuming Tomcat, check the locatin of your application server)
    /Hyperion/deployments/Tomcat5/bin
    here you will find Shared Services, along with few more.
    use stopSharedServices9.sh and startSharedServices9.sh
    Cheers...!!!

  • Like to know how to restart failes patch

    Dear all
    If any patch fail to apply patch due some reason's how to restart... From some web site i seen that there is option called adctrl is use for restart failed worker.. Now we assume like if the patch completed around 90 % and it taken around 2 hours for that.. Now the remaining 10% only wanna to execute which is taken only ten min to complete now what i wanna to do complete with out start the process from beginning...
    Mean while i like to know the difference between adctrl and autopatch restart (i.e the purpose of $APPL_TOP/admin/<SID>/restart ).....
    Regards
    Gopinath

    Hi,
    If any patch fail to apply patch due some reason's how to restart... From some web site i seen that there is option called adctrl is use for restart failed worker.. Now we assume like if the patch completed around 90 % and it taken around 2 hours for that.. Now the remaining 10% only wanna to execute which is taken only ten min to complete now what i wanna to do complete with out start the process from beginning...Please see the link
    http://beginapps.blogspot.com/2008/04/how-to-apply-11i-patch-when-adpatch-is.html
    The above link talks about 11i. It is the same for R12 except the location of restart files in R12 is in $APPL_TOP/admin/<SID>
    Mean while i like to know the difference between adctrl and autopatch restart (i.e the purpose of $APPL_TOP/admin/<SID>/restart ).....Please read the documentation
    http://docs.oracle.com/cd/B34956_01/current/acrobat/r12adutil.pdf
    Breifly
    Using adctrl you can control the workers, like quitting them, restarting them checking the status.
    The purpose of restart directory is to store the last status of the workers and other information will be needed if patch needs to be restarted next time.
    Thanks

  • How to restart base station from airport utility? I used to be able to do it remotely  I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose t

    How to restart base station from airport utility? I used to be able to do it remotely
    I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose the issue. This results in being told to restart the wireless. The airport utility includes the drop down option of restarting but is not clickable so I can't choose it.
    With my prior macbook and same time capsule, etc  if i had problems connecting to the internet I would run network diagnostics to help out. This included clicking on the airport utility ---> base station --> restart. This worked most of the time.
    Bottom line, is there something I am missing in not being able to restart the wi-fi remotely? ]
    Thanks in advance

    You are likely forgetting a step.
    Open AirPort Utility
    Click on the Time Capsule icon
    Click Edit in the small window that appears
    Now click the Base Station menu.....top of the screen....not the Base Station "tab" in the center of the screen
    Click Restart

  • How to devolped an Interactive ALV Report to display sales orders

    hi,
             how to devolped an Interactive ALV Report to display sales orders pertaining to the selected Customers and item details in the secondary list.For this report what are the tables and fields wehave to used give with example.
    thank you
    radhakrishna

    Hi,
    look via se38 for BCALV* and SALV*.
    Try ABAPDOCU.
    Regards, Dieter

  • How to customize an interactive report PDF using a BI Publisher template

    Hi,
    I am trying to figure out how to get an interactive report to work with BI Publisher. I want it so that I can create a custom RTF template with custom headings, and then apply this for the interactive report.
    On the front end, when a user runs an interactive report, they are able to hide and show columns, and then click on Actions > Download > PDF. I want this to access the custom template and return a PDF based on this template, and also showing the columns that the user has selected in the interactive report.
    I have already created a custom RTF Word Doc in BI Publisher, and have uploaded it into a report query created in Apex. I am not sure though how to apply this report query to an interactive report, or if that’s even what I’m supposed to do to get it to work the way I want it to.
    When editing the Report Attributes, under Print Attributes, there is a section called Printing.
    Under this, there is a "Print Server Overwrite". I thought this is where you can specify your report query. But I am not sure if I even need a report query because I don't understand why you have a report query that is based on a static query, when in an Interactive Report, the user can hide columns.
    I have Apex 4.0.1.00.03 and Oracle BI Publisher 10.1.3.4.0d installed.
    Thanks,
    Gage

    Hi Gage,
    Custom RTF and XSL-FO templates are currently only supported with classic report regions and report queries, but not with interactive reports. So you would need to create a report query based on the SQL statement you used for your interactive report and then associated your template with that report query. Unfortunately you won't be able to use any of your customizations, filters, or column selections this way. We're planing to support report layouts with interactive reports in the future.
    Regards,
    Marc

  • Outbound process red flag - how to restart?!

    Hi, well i tried in a previous post to get help but i guess it was a little misunderstanding.
    I have a well processed message but it's not being send to target system, so i get a red flag on column outbound status in SXI_MONI. It's like a system is not available but in this case it is.
    It is File to IDoc Scenario and be sure that i already checked SM59, SX1, SX2 and so on.
    Funny thing is that sometimes message is send properly - when CC read one file - but when it has to read >1 outbound status will be set to error for each message!
    has somebody any clue on this issue?!
    br!!

    Hi,
    it's a FILE2IDoc Scenario i am getting no error at all except of the red flag for outbound process. In detal-view of the message nothing is reported an even the CC-Monitoring is showing nothing because IDoc-Adapter is not part of the Adapter-Engine.
    That's the problem! Because a target systems is connected via VPN to the gateway of the XI. And when the VPN is not active, the message is not being transmitted. But in XI i connat restart it when VPN-Tunnel is active again.
    Any clue on how to restart?!
    br

  • How to restart an workflow if ended in error at SEND Mail step.

    Hello All
          I am facing some problem in restarting the error workflow.
    Issue is:
       Workflow ended in error at the mail notification step, since the mail id is not filled into the container so there is no address (mail id) and ended in error.
       How to restart these kinds of workflow in the system?, we have tried to change the container value by assigning mail id and restarted the workflow but still went into error.
    Is it possible to restart an workflow which ended in error other than rule resolution.
    Regards
    Anand KS

    I think you went in the write approach. I think you have to change the container properly by populating the ADDRESSTRING container element. Also check whether type of email recipient in your container is et to Email.
    Thanks
    Arghadip

  • How to restart WorkItem if the status is completed

    Hello,
    Due to my mistake in PRD not in DEV i changed the WI status from started to completed.
    Now i have 110 WI affected and i dont know how to restart them, or make them finish normaly the right path.
    In the LOG i can see: Execution was ignored (work item has final status)
    Area: SWF_RUN
    Msg: 568
    Regards
    Laurynas Prikockis
    Edited by: Laurynas Prikockis on Apr 15, 2009 7:59 AM

    Resetting the status of a completed workitem? I think it is not possible , because you can reset the status of a workitem which is in in process state to ready state or the workitem which is in error state( May be not sure) but the status of completed workitem , not possible, because the workitem will not be in any of the users inbox.
    But will let you  know , if there is any possiblity
    Check this error when I tried to reset the status of workitem which is completed by using the FM
    SAP_WAPI_SET_WORKITEM_STATUS
    Status change from COMPLETED to READY is not allowed/possible

  • HT4759 my ipad is disabled.how to restart

    due to wrong passcod my i pad is disabled..please advice or suggest to how to restart my i pad

    Hi gibachonga,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Cheers,
    - Judy

  • How to restart the J2EE Engine

    I ran a couple tests the other day, and the next time I looked the J2EE Engine was down.  (Could not send or receive PTP messages to it).
    When I brought up the J2EE Engine Administrator, it put upt the following help box:
    <b>Unable to lookup connection default
    http:host1:8101/msgserver/text/login returned empty list of connection parameters</b>
    I had to reinstall to get it to work.
    Does anyone know how to restart the J2EE engine ?
    Thanks, John

    Hi,
    judging by the URL given in the error message (which is a URL that queries the message server), your engine must be of 6.40 version. Well, on 6.40 you should have the SAP Management Console (SAP MMC) that you can open and start the engine from. TO open it, go to Start -> Programs -> SAP Management Console. Inside, locate your SAP System, right-click on it and select Start.
    That's it.
    Just for a reference, <a href="http://help.sap.com/saphelp_nw04/helpdata/en/9b/dd7277f3e64ecba59f7fbac7edd2fe/frameset.htm">this</a> page contains also some screenshots of the MMC.

  • How to restart the Successfully processed messages

    Hi,
    I have IDOC to File Scenario
    we posted the idoc from R/3 and it has processed successfully.
    Now again i want to process that idoc again with out going to R/3.
    How to restart the Successfully processed message from MONI.
    we have one option in MONI Restart. this is not working for Successfully processed messages.
    How to achieve this
    Regards
    Suman

    Hello Suman..
    XI: Restarting successfully processed messages..
    Go through this : Michal Krawczyk Blog This will really helpful to you..
    /people/michal.krawczyk2/blog/2005/11/09/xi-restarting-successfully-processed-messages
    Reward Points If it is Helpful...
    Thanks,
    Satya Kumar..

  • How to restart the Servlet Engine?

    Hi
    I am configurating a WebDAV repository in KM
    I am required to restart the Servlet Engine.
    Can anyone please explain me how to restart the servlet engine.
    Thanks in advance
    -madhu

    Basically it means to restart the Java engine!
    On way to do this is to use the NetWeaver Administrator tool (http://portal:port/nwa) and navigate to Administration -> Systems -> <Your SID> and then you will see your dispatcher and server nodes. Just restart the server0..n nodes.
    Cheers

  • How to restart the printer?

    HP officejet Pro 8600, Windows 7 64-bit
    Can you tell me how to restart the printer? I haven't used it for 2 or 3 days and the priter is at sleeping condition. I tried to push on the power butter, but it doesn't work.
    I don't use the printer ofter. should I just turn the power off if I don't use it? 
    Thanks,
    Henry

    Restart the printer by unplugging  power from the back of the printer.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How to restart the i pad after eraseing the contents

    Hey does any body know how to restart the Ipad after the contents were erase with out being back up? Now the Ipad won't let get to home screen

    If you erase the contents of the iPad, you have to start all over again, just like you did when you took it out of the box and turned it on for the first time. It is like the device is brand new again. You will get to a point in the set up where you have the option of restoring from a backup (iTunes or iCloud) or set it up as a new device. If you don't have a backup, then you do have to start all over again. It doesn't "go to the home screen" until after you set it up again.
    If you are not seeing this behavior on your iPad, restart the iPad and try again.
    If that doesn't answer your question, what exactly are you trying to do? And what about it isn't working for you?

Maybe you are looking for