How to restart awaiting approval  for RFX

Dear Expert,
We're on SRM 7 and use automatic approval workflow for RFX.
Today, when we created RFx and checked the the approval  status , it is awaiting approval  and the system can not approve it .
I check the log , and it is no error. so we had to restart SRM system, after that, the workflow  is Ok.
Now, I want to know how to restart workflow for the RFx which approval  status is awaiting approval  .
Best Regards,
Bill

Hi, 
What do you say about restart SRM? Close the Browser and does you open again? 
Define as solemnity approval RFX through transaction OOCU in the way SRM> SRM-EBP> SRM-EBP-WFL 
Activate event linking 
Rgs, 
Pedro Marques

Similar Messages

  • How to change default approval for ResourceAuthorizerApproval ?

    Hi,
    I'am new in OIM and I follow documentation where I found some predefined workflows. I'd like to use them.
    Could you tell me, step by step, how to change default approval for ResourceAuthorizerApproval (only for my new defined resource).
    I'm using OIM 11g and Design Console 11.1.1.3.0.2.0

    Ok, I made new tamplate (copy of existing one), there I changed Template Level Approval Process and set allowed resources. It seems to be ok :)
    If there are other solutions please share with me
    Thanks
    M.

  • Hi "Awaiting Approval " for shopping cart.

    We are using standalone model in SRM FI system as backend. we have a probelm with automatic approval process in workflow.
    When we are creating a shopping cart, we are getting status  " Awaiting Approval " .
    Can any one help me how to track this problem and is it workflow probelm or SRM side problem.
    when i see in BBP_PD work flow is not at all triggered. There is no workflow for that Shopping cart.
    Thanks in advance.
    Thanks,
    Tirumala

    Hi Ranjan,
    Your correct i am using SRM7.
    but  workflow is already active.
    Can you please help me i am new to workflow and SRM7.
    how to solve this issue.
    this problem is related to workflow or SRM.
    Please give me breif solution.
    Thanks in advance
    Thanks and regards,
    Tirumala

  • How do I get approved for Sam's Club Credit?

    Anyone know if Sam's Club credit card is harder to get for some reason?  I can't seem to get approved for it.   I applied in May, are they strict when it comes to extending credit? There's a new Sam's club opening up in the town I live in and want to shop there, but not necesarily use my credit cards / cash for it. 

    BigDaddy63 wrote:
    Taoron wrote:
    Anyone know if Sam's Club credit card is harder to get for some reason?  I can't seem to get approved for it.   I applied in May, are they strict when it comes to extending credit? There's a new Sam's club opening up in the town I live in and want to shop there, but not necesarily use my credit cards / cash for it. Don't know why you haven't qualified; if anything you should be eligible for the MC version.  I qualified for the store card, but hope it will be upgraded to MC in the future.  First time I applied, didn't know that I needed to call in for verification because the application page had 7-10 day message and nothing else, so when I got denial letter, I called in and they said they couldn't verify my identity and told me I could reapply in 30 days and I might have to go through verification process which I did.  Also when I reapplied, the old app was still in the system and I had 2 showing. His TU fico is showing 642...am i missing something? I thought to get MC version you had to be in 700s?

  • R12 How do i bypass approval for BPA's

    Snippet from the R12 PO user guide
    A Document Total rule defines the maximum document amount that the approval group can approve. This type of rule is optional for all but a blanket purchase agreement approval group. If you want to specify a Document Total, choose this Object Type with an Approval Type of Include and enter an Amount Limit.
    Note: The Document Total rules are the only rules applied to blanket purchase agreements.
    =============
    Now i did remove the Document Total rules associated with the approval group to see if it by-passes the approval chain. It does not!!!
    Any idea on how i can eliminate the approval process for BPA's (Blanket Purchase agreement)
    Thanks.

    Thank you for responding. I noticed that the document type for BPA has been set to "Approve by owner"
    Approval Group has been setup with just Account Limit and i end-dated the Document total too.
    Is there anything else that i can do to would by-pass BPA approval

  • Workflow-status is awaiting approval for rejected item

    Hello,
    I am working on SRM 5.5. Extended classic scenario.
    I have implemented the workflow WS1400133 for 3-step SC approval ( using the corresponding BADI) .
    I have an issue , where, if the shopping cart is rejected by one of the approvers, then the approval overview shows result : REJECTED , however, the approval status in the ( approval transaction) , shows the workflow status as 'AWATING APPROVAL'.
    So, the user cannot modify the shopping cart to resubmit for approval.
    Any inputs as to why this is happening and any solution to this ?
    Thanks in advance,
    Aravind Nair.

    Hi Arvind,
      When the SC is rejected ,the total value fo the SC becomes 0.Have you set the  parameter "no_further_approval_needed" for this condition(for rej items)?
      ALso refer the note 790027.Hope this helps.
    Regards,
    Disha.
    PLs reward points for helpful answers

  • How to check the approver for PR release strategy?

    Hi Expert!
    I have a PR created with value of USD13 000(approx GBP 8500). This PR should go to Manager01 for approval because Manager01 limit is until GBP10 000. But however the PR is NOTgoing for Manager01 queue, it was going under Manager02 queue for approval and Manager02 has limit of GBP20 000K. Why is this happen? Where can i check for approval limit for Manager01 and Manager02?? Please help me..
    Thanks.

    Hi,
    Check the character values you entered against the release code Release strategies view.
    Path: SPRo>>MM>>Purchasing>.Purchase Requisition>>Release procedure>>Procedure with classification>>Set Up Procedure with Classification
    Click on release strategies , here click on classification , so check the valuues enterd against the hirarchy.
    Regards,
    Andra

  • RFC function to list shopping carts awaiting approval

    Hello people,
    do you know a RFC function to display the shooping carts that are awaiting approval by a manager (an user id) ?
    Thanks a lot!!

    Hi,
    Have a look at the following thread:
    How to get all shopping carts awaiting approval for an approver
    Thanks,
    Pradeep

  • PO with status "Deleted" in SRM and status "Awaiting Approval" in BW

    Hi,
    Report Purchase Order status ( 0BBP_PO_Q007) on ODS 0BBP_PO shows status "Awaiting Approval" for Purchase Orders that have status "Deleted" in the SRM source system.
    Any idea about an appropriate OSS note or other work around solution?
    Thanks in advance for your replies.

    1) The PO data can be extracted from SRM or R/3 . But the advantage of extracting data from R/3 is that you have lot many other data while compared to SRM system . In case u are having SRM and Sap R/3 or ECC as your backend system , it is always better to  extract PO data from R/3 or ECC. In case your backend system is going to be other than SAP system , probably we can think of extracting data from SRM.
    2) GR and invoice data always have to be pulled from R/3 system
    3) Shopping cat details exist only in SRM and the details has to be extracted only from SRM .
    Suggest to extract 1) shopping cart from SRM  2) PO,GR and Invoice from SAP R/3 or ECC.
    Hope above clarifies your questions
    Regards
    Mani
    Message was edited by:
            Manikanda Ilango S.
    Message was edited by:
            Manikanda Ilango S.

  • Awaiting approval status

    Hi All,
    Can we find the list of SC's which are in awaiting approval for a particular company code and product category. I know we can find it based on the purchasing org and purchasing group(based on a company code) from monitor shopping cart transaction but it is not retrieving the correct results.
    Is there any table or report or FM to find this.
    I have looked into reports BBP_BW_SC(1,2,etc) but these are not helpful.

    Hi,
    go to T.code: BBP_BW_SC2 here you can check the status of the shopping cart.
    There is no other report available in Std SRM.
    Take the  program BBP_BW_SC2 and modify.
    This is the best solution .We have done modifications in this report
    Regards
    G.Ganesh Kumar

  • How to create Process level configuration for RFx N-step approval in SRM7.0

    Hello experts,
    Can any body guide me to create the Process schema for N-level approval in RFx.
    My requirement is based on RFx target value, Document type N some custom fields like (Mode of Tendering).
    For this purpose, we are going to maintain one custom table with the above said fields like If the value falls under $1000 with the Tender mode as '101' N the Document type as 'BID' then need to go for 2 level approval like that.........
    Appreciate your quick reply.
    Regards,
    Krishna Prasad M.

    You can just add the process levels one by one and change the agent (approver)
    I realized this as the following:
    For BUS2200
    Process Schema: 9EV_RFQ_00S (Returns the constant : 9C_BUS2200_EX01)
    In 9C_BUS2200_EX01
    There is only two levels in the standard, one is the manager approval , the other is the auto-approval.
    I added one after the first one , and change the "Resp. Resolver Name" to "RR_MANAGER_OF_MANAGER".
    Wish it helpful.
    Regards,
    WuLin.

  • Single Step approval BRF Workflow for RFx.

    Hi,
    I am facing one problem in process controlled workflow for RFx. I have the scenario where I have only one approver but 7-8 reviewer are there in between of approver and initiator for example:
    Initiator >reviewer1>reviewer2->reviewer3->....reviewer8-->approver.
    For acheiving this I have activated standard single step approval workflow.
    But while I am trying to add reviewers to the RFx at the time of creation of RFx the system is not shwing the reviewers. it gets refreshed only reviewers line is added to the reviewers Tab but system did not display any reviewer.
    And while I publish the RFx it directly goes to the approver and while i tried to add the reviewer from approver end the same problem is coming.
    Please help me. How I cam achieve this functionality.
    Thanks & Regards,
    Sachin

    Hello Ashutosh,
    Thanks For your reply. I want to add reviewers at the time of creation of RFx not ad-hoc approvers.
    As I explain in my question that I have only one approver in whole approval process rest all are the reviewers only who only do the review and add comments not the approving authority.
    Thanks,
    Sachin

  • SC, RFx, and PO status always awaiting approval

    Dear Expert,
    we have do some configuration in our SRM 7 system, and use workflow
    without approval for shopping cart RFx, and PO.
    there is no problem during the transaction, until this morning, suddenly our shopping cart,RFx, and PO status is always awaiting approval.
    Extended classic scenario is used.
    need your help,
    Best Regards,
    Melynessa Sitompul

    Hi Masa,
    this is the Object Type Linkage that activated for SC and PO:
    BUS2121     APPLICATIONERROR     WS10000072
    BUS2121     COMUNICATIONERROR     WS10000095
    BUS2121     SAVED     WS10000060
    BUS2121     SAVED     WS14500015
    BUS2201     CHANGEVERSIONSAVED     WS14000075
    BUS2201     CHANGEVERSIONSAVED     WS14000145
    BUS2201     SAVED     WS14000075
    Best Regards,
    Melynessa

  • SC in Awaiting Approval but no work item found for SC

    Hi
    We are in SRM 5.5 Extended Classic Scenario will item-based approval workflow for SC.
    A requestor has created a SC which requires several steps of approval.
    The shopping cart has status 'awaiting approval' but when we check via BBP_PD system gives 'No workflow item found .
    Why this occurs is already strange we have lots of SC every day and workflow item is created properly.
    But 2nd question is if there is a solution available to retrigger / restart the workflow for this SC ?
    Any help would be appreciated

    Hi,
      did you check in SWI6 or SWIA?
    Saravanan
    Edited by: Saravanan Dharmaraj on Nov 30, 2011 1:57 PM

  • RFx status is Awaiting Approval - needed PUBLISH

    Hello SAPions,
    We are in SRM7.0 ehp4. PPS.
    Issue: When Publishing Rfx, status is going to Awaiting Approval rather than PUBLISHED status.
    I have configured the system to create Rfx and when I try to PUBLISH them, they are going to Awaiting Approval.
    First I activated the BC Sets for automatic approval. When this didnt work, We activated the WS40000014 workflow.
    Can someone throw some light on What is that we are missing?
    -Ashwin.

    checked above notes and are not applicable to us.
    The following data is downloaded from the Approval Tab of RFX(Approval Process Data:Download as XML)
    <?xml version="1.0" ?>
    - <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
    - <asx:values>
    - <PROCESS_INFO>
      <WF_VERSION>0200</WF_VERSION>
      <PROC_STATUS>INIT</PROC_STATUS>
      <IS_DYNAMIC_WORKFLOW>X</IS_DYNAMIC_WORKFLOW>
      <HAS_WORKFLOW_ERROR />
    - <PROC_DETAIL_LIST>
    - <_-SAPSRM_-S_PDO_WF_PROC_DETAIL>
      <TIME_INDICATOR>F</TIME_INDICATOR>
    - <PROC_LEVEL_LIST>
    - <_-SAPSRM_-S_PDO_WF_PROC_LEVEL>
      <LEVEL_GUID>TEf8cMRqD6DhAAAACoDESg==</LEVEL_GUID>
      <LEVEL_SEQNR>999</LEVEL_SEQNR>
      <LEVEL_TYPE>S</LEVEL_TYPE>
      <TEMPLATE_ID>WS40000025</TEMPLATE_ID>
      <APPROVAL_TASK_ID>TS40007988</APPROVAL_TASK_ID>
      <DECISION_TYPE>1</DECISION_TYPE>
      <LEVEL_STATUS>VALID</LEVEL_STATUS>
      <LEVEL_DECISION_STATUS>OPEN</LEVEL_DECISION_STATUS>
      <IS_ADHOC_LEVEL />
      <RESOLVER_NAME>SYSTEM</RESOLVER_NAME>
      <GENERATED_GUID>TEfNZ8R2D6HhAAAACoDESg==</GENERATED_GUID>
      <DOCUMENT_GUID>TEf8VsRqD6DhAAAACoDESg==</DOCUMENT_GUID>
      <DECISIONSET_ITEMSTATUS_MAP />
    - <AGENTS_BY_KEY>
    - <_-SAPSRM_-S_PDO_WF_PROC_AGENT_BK>
      <WORKITEM_ID>000000000000</WORKITEM_ID>
      <LEADING_OBJECT_GUID>TEfNZsR2D6HhAAAACoDESg==</LEADING_OBJECT_GUID>
    - <AGENT_LIST>
    - <_-SAPSRM_-S_PDO_WF_PROC_AGENT>
      <AGENT_ID>WF-BATCH</AGENT_ID>
      <AGENT_TYPE>RA</AGENT_TYPE>
      <CREATED_BY />
      <CREATED_AT>0</CREATED_AT>
      <REVIEWER_OID />
      <AGENT_OT>US</AGENT_OT>
      <AGENT_FULL_NAME />
      </_-SAPSRM_-S_PDO_WF_PROC_AGENT>
      </AGENT_LIST>
      </_-SAPSRM_-S_PDO_WF_PROC_AGENT_BK>
      </AGENTS_BY_KEY>
      <WORKITEM_LIST />
    - <DECISIONSETS>
    - <_-SAPSRM_-S_WF_DECISIONSET_STAT>
      <DECISIONSET_GUID>TEfNZsR2D6HhAAAACoDESg==</DECISIONSET_GUID>
      <RESOLVER_NAME>SYSTEM</RESOLVER_NAME>
      <STATUS>OPEN</STATUS>
      </_-SAPSRM_-S_WF_DECISIONSET_STAT>
      </DECISIONSETS>
      </_-SAPSRM_-S_PDO_WF_PROC_LEVEL>
      </PROC_LEVEL_LIST>
      <WORKITEM_LIST />
      <AGENT_LIST />
      <AGENTS_BY_KEY />
      </_-SAPSRM_-S_PDO_WF_PROC_DETAIL>
      </PROC_DETAIL_LIST>
      </PROCESS_INFO>
      </asx:values>
      </asx:abap>
    can someone suggest something?
    -Ashwin.

Maybe you are looking for