How to restart my ipad

My screen shows the power plug and is pointing to a sign of the itunes store and is frozen. I'm a new user. Can I restart it?

The iTunes icon and cable mean that the iPad has gone into recovery mode : http://support.apple.com/kb/ht1808
You will need to connect the iPad to your computer's iTunes and it should recognise that an iPad in recovery mode has been connected to it, and you should then be able to reset the iPad via iTunes - you can then restore/resync your content to the iPad.

Similar Messages

  • Can anyone advise on how to restart my IPad 2...It would not open my Emails so I thought I would restart it but after "swiping" it the cursor (star) simply sits there rotating

    I cannot restart my IPad 2 ... I tried to power down it but now cannot restatrt it.... The cursor is simply rotating ...

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HT4113 how to restart my ipad

    hi
    i'use by mistak the passcode , and my ipad is locted , have massige is contact to itunes?

    Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times.

  • I need to restart my iPad , forgot password and it is now disabled

    I need to restart my iPad mini from scratch, it has been wiped clean and disabled on ITunes. I want to know how to restart the iPad and put a new password in , connected to iTunes and don't know where to start.....

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • How to restart the i pad after eraseing the contents

    Hey does any body know how to restart the Ipad after the contents were erase with out being back up? Now the Ipad won't let get to home screen

    If you erase the contents of the iPad, you have to start all over again, just like you did when you took it out of the box and turned it on for the first time. It is like the device is brand new again. You will get to a point in the set up where you have the option of restoring from a backup (iTunes or iCloud) or set it up as a new device. If you don't have a backup, then you do have to start all over again. It doesn't "go to the home screen" until after you set it up again.
    If you are not seeing this behavior on your iPad, restart the iPad and try again.
    If that doesn't answer your question, what exactly are you trying to do? And what about it isn't working for you?

  • My ipad has gone in lost mode by mistake and now i have it and i enter the password and i cant enter my ipad how can i enter or restart the ipad and start back over new

    my ipad has gone in lost mode by mistake and now i have it and i enter the password and i cant enter my ipad how can i enter or restart the ipad and start back over new

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • TS3899 In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

    In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.

    Greetings,
    Questions:
    1. What version of the Mac OS are you running (Apple > About this Mac)?
    2. What version of the iOS are you running (Settings > About)?
    3. Do you use MobileMe/ iCloud or another server based sync solution like Google or Yahoo?
    4. Do other changes to synced information like Address Book content sync successfully back and forth?
    Based on your description it sounds like you have a 1 way sync issue.  Events sync fine between the iOS devices and fine from the computer to the iOS devices but not from the iOS devices to the computer.
    Try:
    Backup your computer and iOS devices before doing anything else:
    http://support.apple.com/kb/HT1427
    http://support.apple.com/kb/ht1766
    Ensure all the devices in use are fully up to date: Apple > Software Update / Settings > General > Software Update
    Make separate backups of critical data:
    Backup your computer Addressbook: http://docs.info.apple.com/article.html?path=AddressBook/4.0/en/ad961.html
    Backup your computer iCal: http://support.apple.com/kb/HT2966
    Reset syncing on your Mac: http://support.apple.com/kb/TS1627
    Reply back if that does not resolve your issue.
    Hope that helps.

  • I cannot restart my ipad: how to solve it?

    I cannot restart my ipad: how to solve it?

    Assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a soft-reset to see if that gets it to book up ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I have a program that requires cancel, details or continue. It appears to be stuck and will not let me slide to unlock or slide to close.  How do I restart the ipad?

    I have a program that requires cancel, details or continue. It appears to be stuck and will not let me slide to unlock or slide to close.  How do I restart the ipad?

    Hi there, welcome to the site,
    I have posted a link below which has instructions on how to do this. They are quite simple, so take a look.
    iPad not responding
    Regards,
    Nathan

  • My Ipad crashed, so I pressed both power and home button, now I have to restart my ipad on the itunes, but there are some important info I cannot loose... how can I save this info at this time? actually is some info the I saved in the "notes" app! help!!!

    My Ipad crashed, so I pressed both power and home button, now I have to restart my ipad on the itunes, but there are some important info I cannot loose... how can I save this info at this time? actually is some info the I saved in the "notes" app! help!!!

    I Had it on my iPod, but I reset to factory settings and it got deleted :( If I find a way to get it back, I'll post it here so you can too.

  • How to restart ipad once battery has run down

    how to restart ipad once battery has run down

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • Ipad 4 frozen during update ios 8.1.3. - did anybody know how to restart (or reset) my ipad4 from black screen with white apple logo?

    ipad 4 frozen during update ios 8.1.3. - did anybody know how to restart (or reset) my ipad4 from black screen with white apple logo?

    Hi there did you end up getting this resolved?  I have the same exact same issue with my Ipad 4 when updating to 8.1.3....frozen on the apple logo.  Tried resetting as advised by other users but just goes back to the same logo.  Tried connecting to iTunes but device is not picked up at all.  Left it over night to run flat hoping charging might kick start something....but when I put on the charger it shows the battery charge icon but won't actually charge it.  It's really doin my head in trying to find a fix - cheers Morgan

  • I forgot my restrictions passcode for my ipad. under settings i went to "erase all content and settings" but it needs the passcode. how do i restart my ipad so it can go back to normal? i dont care about losing everything on it

    i forgot my restrictions passcode for my ipad. under settings i went to "erase all content and settings" but it needs the passcode. how do i restart my ipad so it can go back to normal? i dont care about losing everything on it

    Try and force the iPad Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • HT1212 i cant restart my ipad so could u tell me how to

    i cant restart my ipad could u tell me how

    Restart iPad
    1. Hold down the Sleep/Wake button until the red slider appears.
    2. Drag the slider to turn off iPad.
    3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears

  • HT4759 my ipad is disabled.how to restart

    due to wrong passcod my i pad is disabled..please advice or suggest to how to restart my i pad

    Hi gibachonga,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Cheers,
    - Judy

Maybe you are looking for

  • How to edit the text of a certain column in SALV_WD_TABLE  in ESS layout

    hi,expert. i want to change the text of the column:appraisee name in ESS worklist.      Application :HAP_START_PAGE_POWL_UI_ESS     Web Dynpro Component: SALV_WD_TABLE     Window Information: TABLE     View Information: VIEW_TABLE how can i achieve i

  • Need to declare GUID in Class to use in Workfloq

    Hi Guys! I created a new class (via SE24) with two attributes as its key - but its lenght exceeded 32 charaters. I went thru the blogs posted by Jocelyn where she mentions to use GUID to declare the key. Can someone please explain how do the go about

  • Write data to PLC register using datasockets

    hello all... i have made some headway, i can access the PLC read data from it (1-10) and depending on the random # produced i get a message from a file and display it. Now...i need to write back to a register in the PLC with some informatio (string a

  • Using zlib

    Hi! I'm working on a loader for a fileformat compressed partially with zlib. It says in the documentation of the format that it's compressed using zlib with a 32k buffer size, but I haven't been able to get any understandable information out of it wh

  • Error on using jQuery.download

    Hello Experts, I am trying to download excel file from a my UI using XSJS file I have created a button "Export" to download excel file. But when I click on this button, I get the below error: Uncaught TypeError: undefined is not a function Regards, R