How to restart network services without rebooting the machine

Hi ,
i am new to solaris
pls guide for this

Hi ,
i am new to solaris
pls guide for this

Similar Messages

  • How to restart VSS writers without rebooting

    Hello fellow teckies.
    I'm having this problem when backing up with Symantec Backup Exec 11d where it generates errors about not being able to backup VSS sections on the C drive.
    I've already posted with Symantec. 
    https://www-secure.symantec.com/connect/forums/vss-c-drive-errors-when-backing-server
    They're saying to re-register and restart the services.  My question is, can the services be restarted without rebooting?
    Unfortunately rebooting is not an option as this is a critical production server.
    If anyone can answer, please let me know.
    Thanks :)

    What Santhosh mentioned is on the right direction. To restart a VSS writer, you need to restart the services or process that hosts the writer. Generally speaking, we will
    take the following steps when encountering VSS writer related issues:
    Retry the backup or restore operation that caused the error condition.
    If this does not resolve the issue, restart the service or process that hosts the writer, and retry the operation.
    If this does not resolve the issue, open Event Viewer as described in the "Open Event Viewer and view events related to VSS" section and look for events related to the
    service or process that hosts the writer. If necessary, restart the service or process, and retry the operation.
    If this does not resolve the issue, restart the computer, and retry the operation.
    If restarting the computer does not resolve the issue, provide the Event Viewer information to the vendor whose application is indicated in the event text.
    http://technet.microsoft.com/en-us/library/ee264212(WS.10).aspx
    As for the impact of the restart, it generally will not cause bad effect. However, it depends on the service which is restarted. Generally speaking, a service should handle
    all the related task, such as writing all data in memory into disk and committing the transaction, etc, when a properly restart operation is performed. If there are any particular requirement or order to follow to restart a service or application, you should
    follow the recommended restart procedure.
    Meanwhile, it is reported that when performing Shadow Copy Components backups with the File Server Resource Manager (FSRM) installed you may encounter this issue. Please
    refer to the following Symantec article:
    http://www.symantec.com/business/support/index?page=content&id=TECH48419
    NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control
    these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the
    use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.
    Laura Zhang - MSFT

  • How to restart network service

    Hi all,
    Is there a efficient way to restart the netwoork service on Solaris 8 or Solaris 9 ?
    (for example on tru64 rcinet restart do the job, similar on linux, but on Solaris can't find something similar)
    I've tried with stop/start of inetsvc and inetinit but I'm not satisfied wiith result.
    "network restart" cause unkwon hostname to occur (I'm not using DHCP, but static IP).

    Hi all,
    Is there a efficient way to restart the netwoork
    service on Solaris 8 or Solaris 9 ?
    (for example on tru64 rcinet restart do the job,
    similar on linux, but on Solaris can't find something
    similar)
    I've tried with stop/start of inetsvc and inetinit
    but I'm not satisfied wiith result.
    "network restart" cause unkwon hostname to occur (I'm
    not using DHCP, but static IP).Hello, try first to check/create /etc/nodename with your hostname, and check if it exists too in /etc/hosts.
    That name or your Ip address must be in the /etc/hostname.device(#) being device (hme or pcn or other) the name of your NIC driver, followed (#) by a number, 0 if the first.
    In a sparc machine the typical first network interface name file is /etc/hostname.hme0 and usually contains the hostname (`uname -n`) and must exist in /etc/hosts too.
    Example
    /etc/hosts (should be like this)
    127.0.0.1 loghost
    10.0.0.1 yourmachine
    /etc/nodename (should be like this)]
    yourmachine
    /etc/hostname.hme0 (should be like this)
    yourmachine
    Then reboot and thats it. I hope this be your solution

  • How to REBOOT the Network without rebooting the Mac?

    Is there a way (perhaps with Terminal) to reboot the Network without rebooting the Mac.
    Sometimes after rebooting the ADSL2+ Router (Comtrend CT-536+) from a web browser pointed to http://192.168.1.1 the router reboots but the Ethernet connection to it gets stuck. The System Preferences Network Built-in Ethernet shows orange instead of green and there is no connection to the Internet. I must reboot the Mac to get out of it but I wonder if there is other way to refresh or reboot the Network without requiring a full Mac rebooting.
    Thanks.

    I'd try setting up a duplicate Location/Connection in System Preferences> Network... slightly different name, then if it gets stuck try switching to the other Location in Network, then hit the Apply button.

  • I want to set up my time capsule on a completely new network & location without losing the old backups. How do I do this?

    I want to set up my time capsule on a completely new network & location without losing the old backups. How do I do this? I cannot find anything in the user manual.

    The TC is very hard to just move.. it retains too much of the old network setup.. buried deep in the bowels of the firmware configuration files.. or even on the hard disk special partitions used by the TC.. invisible to you btw.. !!
    Do a factory reset and setup from scratch.
    That factory reset will have no affect on your backups.. even if you rename the TC.. not a bad things since you also want clients to respond to the new network.. simply reset TM to the new TC name and location.
    See A4 here.
    http://pondini.org/TM/Troubleshooting.html
    Factory reset.
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Factory reset Gen 5
    Hold in reset for about 5sec until the status light flashes quickly.
    If your AirPort Time Capsule still doesn’t respond, do a similar reset to the Gen1-4.
    Unplug your AirPort Time Capsule .. hold in reset and power the TC back on.. without releasing the reset.. wait until status led flashes rapidly.

  • How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file?

    How can we send only one message to a WCF service at a time? How we can limit the number of concurrent calls to a WCF service without use the Singleton pattern or without do the change in BizTalk Configuration file? Can we do it by Host throttling?

    Hi Pawan,
    You need to use WCF-Custom adapter and add the ServiceThrottlingBehavior service behavior to a WCF-Custom Locations.
    ServiceThrottlingBehavior.MaxConcurrentCalls - Gets or sets a value that specifies the maximum number of messages actively processing across a ServiceHost. The MaxConcurrentCalls property specifies the maximum number of messages actively
    processing across a ServiceHost object. Each channel can have one pending message that does not count against the value of MaxConcurrentCalls until WCF begins to process it.
    Follow MSDN-
    http://msdn.microsoft.com/en-us/library/ee377035%28BTS.10%29.aspx
    http://msdn.microsoft.com/en-us/library/system.servicemodel.description.servicethrottlingbehavior.maxconcurrentcalls.aspx
    I hope this helps.
    Rachit
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Restart Network services

    I hope this isn't a repost but I was wondering if there is a way to restart network services in leopard, similar to this command in linux:
    /etc/init.d/networking restart
    I want to troubleshoot my connection to the router in my home, and my linux install works after giving this command, but leopard is having trouble.
    Thanks
    hah nevermind I found what I need
    Message was edited by: Dak

    Try this
    $ sudo ifconfig en0 down
    $ sudo ifconfig en0 up
    Use en1 for your AirPort card

  • How to restart OracleXe service in windowsXP?

    how to restart OracleXe service in windowsXP?
    by sample for restart: mysql:
    service mysql restart
    OracleXE howto?
    thanks

    go to
    Start > Settings > Control Panel > Administrative Tools > Services
    Look for the Oracle Database Service. If I remember correctly, it's something like Ora<Instance_name>.
    Hit the Restart button, it's the button with the icon that's a stop and start.

  • How can i start aperture without retyping the serial number?

    how can i start aperture without retyping the serial number?

    Quit Aperture.
    Go to your Macintosh HD and open the folder "Library", then "Application Support", then "ProApps".
    Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
    Reenter your serial number, hopefully for the last time.

  • How to restart igswd.exe without restarting Centeral instance ??

    Hi experts,
    I setup MSCS configration based on NW04s ABAP.
    I've found igswd.exe is SPOF, once it's down, it seems impossible to restart without restarting CI.
    If anybody knows how to restart igswd.exe without restarting CI, Please instruct me.
    I tried command as follow, but it seems to get freeze...
    K:\usr\sap\BIC\DVEBMGS00\exe\igswd.EXE -m
    ode=profile pf=
    clstsap\sapmnt\BIC\SYS\profile\BIC_DVEBMGS00_txcls1
    I am afraid I am not an expertise regarding IGS. Are there any solution to avoid unavailable of IGS using normal two node MSCS ??
    Regards
    MASAKI
    Edited by: MASAKI KATSUSHIMA on Jan 24, 2008 3:48 PM

    I solved this problem.
    the solution is just execute command
    <Drive>:\usr\sap\<SID>\DVEBMGS00\exe\sapstartsrv.exe pf=<Drive>:\usr\sap\<SID>\SYS\profile\START_DVEBMGS00_hostname
    Thank you.

  • How I enable network service of Oracle database 10g XE ?

    Hi,
    How I enable network service of Oracle database 10g XE ?
    Following error occurs when printing:
    ORA-20001: The printing engine could not be reached because either
    the URL specified is incorrect or a proxy URL needs to be specified.

    ORA-20001 is a user defined error. So you will have to find out where it comes from.
    Regards
    Marcus

  • Is there a way to update an external dictionary for services without migrating the services

    Is there a way to update an external dictionary for services without migrating the services
    Is there a way to update a common external dictionary used by many services without migrating each and every service that uses the dictionary.  I have updated the table in the database and the external dictionary in our Development Environment. The external dictionary is used by many services. When I migrate the changed service to TEST/STAGE/PROD environments (NOTE: the table has been updated in the TEST/STAGE/PROD Databases), only the changed service is having the external dictionary updated. All other services that use the same external dictionary are NOT updated. I have the following questions
    Is it possible to migrate dictionaries so that all the services which are using that dictionary are updated?
    If the first one is not possible, Is there any other way to update the external dictionary without migrating all the services that use dictionary?

    dont think so but I could be wrong
    as it were I didn't like the build in audio so I connected some external logictech 2.1 speakers  but there
    are times when I use headset so I bought this one
    or any minijack splitter will work too so I have 2 things connected to the headset port works just fine
    http://www.belkin.com/IWCatProductPage.process?Product_Id=404634

  • How can i transfer videos without losing the sound to my iPhone 3G?

    Hi
    I have bought my iPhone 3G yesterday. I have found out how to transfer music from iTunes however i can't transfer videos. I'm selecting the videos i want to transfer on the videos tab after i chose my iphone from the side menu and pressing apply. iTunes says that its syncing my iphone but it doesnt transfer the videos.
    Lately i have found out a function on the advanced menu for movies as "create iphone or ipod version". When i used that it transfered that video to my iPhone however the sound was completely lost besides that action takes too much time(around 10 mins for a 3 min video and i have a pretty strong computer).
    How can i transfer videos without losing the sound to my iPhone 3G?

    One thing I'd recommend is that you make sure the video/audio you're trying to transfer falls within the guidelines listed in the 'Video' section here:
    http://www.apple.com/iphone/specs.html
    What's most likely happening is that the file is not converted as such so when you try to transfer it, it's wanting to convert it but is unable to for any number of reasons.
    There's software out there that might make this easier for you but I can't recommend anything specifically.

  • How can I copy/paste without copying the formatting?

    How can I copy/paste without copying the formatting? For example, if I copy a sentence from a website and paste it on text editing program, it copies all the formatting as well. How can I turn that off?

    There is an app called "No Formatting" in the App Store. It is simple and works perfectly - it strips formatting from paste (Ctr-V). I needed it for Word and Excel, which don't have keyboard shortcuts for this. It can be toggled on and off from the Menu Bar.

  • Is there anyway to kill the email app. without rebooting the phone?

    I get emails, but I can't do anything on the screen.  It is totally unresponsive to touch. In addition, my sleep button is broken, so I can't reboot the phone.  (ordered new one, but not getting it for weeks).  Is there anyway to kill the email application without rebooting the phone?

    Thanks, I figured as much. Will I be able to save all my apps and content by importing them to my computer and then uploading them back to my iPad after I upgrade the iOS? If so, do you happen to know if a gen 1 iPad running an iOS 4.2.1 is able to upgrade to an iOS 5? I did read online that the iOS 6 is NOT compatible with it so I want to be sure the iOS 5 is before I go through the trouble...

Maybe you are looking for