How to restart OracleXe service in windowsXP?

how to restart OracleXe service in windowsXP?
by sample for restart: mysql:
service mysql restart
OracleXE howto?
thanks

go to
Start > Settings > Control Panel > Administrative Tools > Services
Look for the Oracle Database Service. If I remember correctly, it's something like Ora<Instance_name>.
Hit the Restart button, it's the button with the icon that's a stop and start.

Similar Messages

[solved...] How to REstart a service?

I'd like to "RE"start a service; which means that i want to stop and start a service only if it was running, but If i do systemctl restart myservice, systemd will start it even if it was stopped.
Also, systemctl report a successful status in stopping an already stopped service, try by yourself!
TravelMate koko # systemctl stop sshd ; echo $?
0
TravelMate koko # systemctl stop sshd ; echo $?
0
...i dont think this is right at all, it is not possible to stop a stopped thing, so it should return error imho.
Anyway, is there a simple way of REstarting a service only if it was running?
Thanks.
Last edited by kokoko3k (2014-12-30 15:44:04)

ANOKNUSA wrote:An exit code of '0' just means the command didn't run into any "failure" conditions. It can mean either that the process succeeded, or that the process had nothing to do. You'd get a non-zero return if you tried to start or stop a non-existent service, and systemd would spit out an error message.
Unfortunately, it is not; at least in an unconsistent systemd world.
Indeed, i managed to solve the issue this way:
systemctl status sshd && systemctl restart sshd
Also see:
# systemctl stop sshd ; systemctl status sshd ; echo $?
● sshd.service - OpenSSH Daemon
Loaded: loaded (/usr/lib/systemd/system/sshd.service; enabled; vendor preset: disabled)
Active: inactive (dead) since mar 2014-12-30 16:40:34 CET; 7ms ago
Main PID: 3016 (code=exited, status=0/SUCCESS)
3
To summarize, if the service is stopped:
systemctl status returns a non zero code.
systemctl stop returns a zero code.
As for your restarting issue, systemd's behavior seems logical.
It seems the opposite to me.
Marking as solved, but still...

How to restart AMP service in Solaris 10

Hi All,
I have installed AMP221.pkg in solaris 10 i86pc. its get installed in /local/apps/amp.
when i type http://localhost its not working.
now How can i start apache service.

Hello,
Make sure that the apache configuration file /etc/apache/httpd.conf exists and has a valid configuration.
Regards,
Rei

How to restart network service

Hi all,
Is there a efficient way to restart the netwoork service on Solaris 8 or Solaris 9 ?
(for example on tru64 rcinet restart do the job, similar on linux, but on Solaris can't find something similar)
I've tried with stop/start of inetsvc and inetinit but I'm not satisfied wiith result.
"network restart" cause unkwon hostname to occur (I'm not using DHCP, but static IP).

Hi all,
Is there a efficient way to restart the netwoork
service on Solaris 8 or Solaris 9 ?
(for example on tru64 rcinet restart do the job,
similar on linux, but on Solaris can't find something
similar)
I've tried with stop/start of inetsvc and inetinit
but I'm not satisfied wiith result.
"network restart" cause unkwon hostname to occur (I'm
not using DHCP, but static IP).Hello, try first to check/create /etc/nodename with your hostname, and check if it exists too in /etc/hosts.
That name or your Ip address must be in the /etc/hostname.device(#) being device (hme or pcn or other) the name of your NIC driver, followed (#) by a number, 0 if the first.
In a sparc machine the typical first network interface name file is /etc/hostname.hme0 and usually contains the hostname (`uname -n`) and must exist in /etc/hosts too.
Example
/etc/hosts (should be like this)
127.0.0.1 loghost
10.0.0.1 yourmachine
/etc/nodename (should be like this)]
yourmachine
/etc/hostname.hme0 (should be like this)
yourmachine
Then reboot and thats it. I hope this be your solution

[solved] How to restart all services with systemd?

I had the habit of restarting all daemons after an upgrade so to make sure the newest libraries, configuration files etc were loaded. I did that with a shell script that restarted the daemons in order which they were listed in rc.conf. With systemd I could do something similar by first getting a list of running services and ordering a 'systemcrl restart <servicename>' for each. But since systemd keeps track of dependencies I wonder if that would be the way to do it. Also I would need to filter out 'one shot' type services that are only needed on bootup.
<edit>restart instead of reload</edit>
<edit>solved it with a little script</edit>
Last edited by rwd (2012-11-27 21:02:02)

I think that's what systemctl snapshot does.
snapshot [NAME]
Create a snapshot. If a snapshot name is specified, the new snapshot will be named after it. If none is specified an automatic snapshot name is generated. In either case, the snapshot name used is printed to STDOUT, unless --quiet is specified.
A snapshot refers to a saved state of the systemd manager. It is implemented itself as a unit that is generated dynamically with this command and has dependencies on all units active at the time. At a later time the user may return to this state by using the isolate command on the snapshot unit.
Snapshots are only useful for saving and restoring which units are running or are stopped, they do not save/restore any other state. Snapshots are dynamic and lost on reboot.
Then, isolate emergency.target or rescue target and switch to the snapshot.

How to restart network services without rebooting the machine

Hi ,
i am new to solaris
pls guide for this

Hi ,
i am new to solaris
pls guide for this

How to restart Seeburger x.400 service

Hello guys,
actually i knew how to restart the service but now i am not able to find it anymore.
We have an external adapter engine and think that the messages are not send because adapter might be down on seeburger machine.
Could you give me a hand on this where to find and restart the X.400 adapter-service in the BIS-fornt end?
br

self-soveld

How to manually restart a service

systemuiserver hung up on me recently and after forcing it to quick in activity monitor, I could not figure out how to restart the service. I'm new to mac from windows, where I would just go to where the services are listen and click restart. I did try blindly using 'launchctl start systemuiserver', but it didn't find the tag systemuiserver. And i tried 'launchctl com.apple.systemuiserver' but that tag wasnt found either.
Any ideas on how to restart a service without having to reboot?
Thanks!

What does the array contain? Objects or strings?
Post some code... it might help!

New 'Worker' framework - restarting a service?

Hey Guys,
Does anyone know how to restart a Service using the new background threading framework. The teaser out there at the moment indicates this is intended but I can't make it work.
Here's my service:
private class LoginService extends Service<User>
    // leaving out the get/sets for brevity
    public final StringProperty userNameProp = new StringProperty();
    public final StringProperty passwordProp = new StringProperty();
    protected Task<User> createTask()
        final String userName = userNameProp.get();
        final String password = passwordProp.get();
        return new Task<User>()
            protected User call() throws Exception
                return // do remote service login with userName and password
} And this is the code using it:
public class LoginController
    private LoginService loginService;
    public LoginController()
        loginService = new LoginService();
        loginService.stateProperty().addListener(new ChangeListener<Worker.State>()
            public void changed(ObservableValue<? extends Worker.State> source, Worker.State oldState, Worker.State newState)
                if (newState.equals(Worker.State.SUCCEEDED))
                    // show application main view
    public void doLogin(String userName, String password)
        loginService.userNameProp.set(userName);
        loginService.passwordProp.set(password);
        loginService.start();
        // I've tried restart(), cancel(), reset() and using various if !state().equals(State.READY) checks before calling each, etc
}Any hints or tips appreciated. Hopefully the docco will be more detailed before long, but until then I'll take whatever works!
Cheers,
zonski

Sorry, actually restart() does now seem to work as expected. I must have had something else in my code causing the issue earlier (not sure what) that seems to have resolved itself.

How to start or restarted Oracle_Secure_Backup service in RedHat linux

Hi
when i try to connect oracle secure backup using the following command, i am getting the follwoing message
[root@midevdb bin]# obtool
obtool: Error: can't connect to administrative observiced - observiced not running
so how i can start, stop and restart Oracle_Secure_Backup service in redhat linux.
thanks
Settu Gopal

the below is the logs from observiced.log log file.
2009/03/31.12:19:28 observiced version 10.2.0.3.0 (linux) -- Tue Sep 23 10:36:22 PDT 2008
Copyright (c) 1992, 2007, Oracle. All rights reserved. on midevdb.in.valtech.com pid 27248
2009/03/31.12:19:28 listening for requests on --
2009/03/31.12:19:28 virbr0 (192.168.122.1) port 400
2009/03/31.12:19:28 eth0 (192.168.140.22) port 400
2009/03/31.12:19:28 info: local host identity not readable or not yet established - no .hostid file
2009/03/31.12:19:28 listening for NDMP connections on --
2009/03/31.12:19:28 virbr0 (192.168.122.1) port 10000
2009/03/31.12:19:28 eth0 (192.168.140.22) port 10000
2009/03/31.12:27:04 failure to negotiate SSL connection with component obtool on fd 6 - no matching cipher suites (FSP Oracle network security functions)
Thanks
Settu Gopal

How to restart services?

hi,
we are using hyperion 11.1.1.3 version which is installed in linux server?Can anyone tell me how to restart the shared services server like we do in windows version...n 1 more question..
how to start interactive reporting and financial reporting from linux server?if possible can u give me the path(example)
Thanks in advance...

Hi,
If you want to stop and start all the services, (I am assuming the Hyperion Home, check as per ur HYPERION_HOME)
Go to:
1) /Hyperion/products/bin
2) you will find stop.sh and start.sh
If you want to start a specific service: (Assuming Tomcat, check the locatin of your application server)
/Hyperion/deployments/Tomcat5/bin
here you will find Shared Services, along with few more.
use stopSharedServices9.sh and startSharedServices9.sh
Cheers...!!!

How often to restart UCCX services?

Hi,
Is there Cisco documentation on how often services should be restarted, or the entire cluster be restarted? The reason why I ask is that we have services running for 588 days since the deployment of our UCCX cluster. I have restarted various services here and there to resolve certain issues, but have not restarted the whole cluster and I think it's due time. I'm a little nervous about it, to be quite honest. Any insight?
Thank you very much.

Hi Sergio,
I would again stand by the fact that a reboot is not necessary until a problem has been identified and the root cause is known to be resolved by the reboot.
Well, if you ask me the procedure to reboot a cluster in a HA environment, then
(Assuming your UCCX Version is 8.x and above)
++ Reboot Node 1
++ Wait for all the services to come up. You can monitor by the CLI "utils service list".
++ Once they are STARTED, reboot node 2.
++ Wait for the all the services to come up
++ Check for the services under Cisco Unified CCX Serviceability -- Tools -- Control Center Network Services
++ Also good idea, to check the replication from Cisco Unified CCX Serviceability -- Tools -- Datastore Control Center -- Replication Servers. The status for both the nodes should be 'Connected' and 'Active'
Also, a good idea would be to use the release notes of the UCCX version that you are running on and find if there are any known issues which involved a reboot as the solution.
Regards,
Arundeep

R12 how to restart forms/web services without also starting concurrent mana

R12 how to restart forms/web services without also starting concurrent managers

jemar98 wrote:
R12 how to restart forms/web services without also starting concurrent managersadopmnctl.sh startall
Managing Server Processes
http://docs.oracle.com/cd/E18727_01/doc.121/e13675/T530130T530133.htm#5274555
Thanks,
Hussein

[SOLVED] How to restart services compatibly with SysVinit

I'm collaborating on a Kubuntu user's package of scripts for Thinkpad X220 Tablets. As part of the installation process of the package, the acpid daemon must be restarted to reload newly installed ACPI hooks. On Kubuntu, the command to restart acpid is:
service acpid restart
According to this page, that should work with systemd, as well. However, this does not work on my Arch Linux system because the 'service' executable does not exist on my PATH. There is a 'service' executable in the pm-utils package, but it depends on the existence of a SysVinit script in /etc/rc.d; Arch uses a systemd service file instead. (Besides, why would something like this be in the pm-utils package, not systemd?)
Using the native systemd command
systemctl restart acpid
works fine for me, but it would be nice to use a single command that's compatible for both systems because it needs to go into a makefile that is used on both systems. Is it possible to use the same command under SysVinit and systemd to restart a service?
Last edited by kwehmu (2013-11-12 06:37:39)

progandy wrote:
The right way to detect systemd would be this:
if command -v systemd-notify >/dev/null && systemd-notify --booted; then
echo SYSTEMD
else
echo "SOMETHING ELSE (call rc.d, service, ...)"
fi
Thanks, that's helpful. I'm still wondering why 'service <name> restart' doesn't work, though. According to the documentation on systemd's website, it should. Why do you think it doesn't work? (Is the documentation incorrect, am I misreading the documentation, is 'service' part of another package, etc?)
tomk wrote:Absolutely, this should be left to the user. The Arch way to handle this is with a post-install message, nothing more.
That makes sense, especially for restarting services. I haven't found any guidelines, though, on what should/shouldn't be included in installation hooks. For example, 'media-player-info' runs 'udevadm hwdb --update' after installation to update udev's hardware database, and font packages such as 'ttf-dejavu' run multiple commands to update the font database. What are some guidelines (or where can I find them) on what I should/shouldn't include?

How to restart service as a recovery task for spacific monitor ?

Hi,
I enable a monitor "WMI Health Monitor"
This monitor checks whether WMI is healthy by periodically performing a WMI query
while i was Creating a recover task To restart wmi service I Get the below error
Date: 1/16/2014 7:39:16 PM
Application: Operations Manager
Application Version: 7.0.9538.1084
Severity: Error
Message:
: Verification failed with 1 errors:
Error 1:
Found error in 1|Restart.WMI|1.0.0.0|MomUIGenaratedRecovery1326b748249640299aba88d5b0aa8bb7|| with message:
Target class Microsoft.SystemCenter.HealthService for Recovery MomUIGenaratedRecovery1326b748249640299aba88d5b0aa8bb7 does not derive from Target class Microsoft.SystemCenter.Agent of the monitor (Microsoft.SystemCenter.WMIFunctionalMonitor) that this recovery
is assigned to.
: Target class Microsoft.SystemCenter.HealthService for Recovery MomUIGenaratedRecovery1326b748249640299aba88d5b0aa8bb7 does not derive from Target class Microsoft.SystemCenter.Agent of the monitor (Microsoft.SystemCenter.WMIFunctionalMonitor) that this recovery
is assigned to.

Found a blog talking about it. See if it helps.
http://stefanroth.net/2012/11/14/scom-2012-recovery-task-script-for-restarting-a-windows-service-and-depending-services/
Juke Chou
TechNet Community Support

How to restart OracleXe service in windowsXP?

Similar Messages

Maybe you are looking for