How to restart WorkItem if the status is completed

Hello,
Due to my mistake in PRD not in DEV i changed the WI status from started to completed.
Now i have 110 WI affected and i dont know how to restart them, or make them finish normaly the right path.
In the LOG i can see: Execution was ignored (work item has final status)
Area: SWF_RUN
Msg: 568
Regards
Laurynas Prikockis
Edited by: Laurynas Prikockis on Apr 15, 2009 7:59 AM

Resetting the status of a completed workitem? I think it is not possible , because you can reset the status of a workitem which is in in process state to ready state or the workitem which is in error state( May be not sure) but the status of completed workitem , not possible, because the workitem will not be in any of the users inbox.
But will let you  know , if there is any possiblity
Check this error when I tried to reset the status of workitem which is completed by using the FM
SAP_WAPI_SET_WORKITEM_STATUS
Status change from COMPLETED to READY is not allowed/possible

Similar Messages

  • How do i find out the status of the ink in the HP 5510 machine?

    Please can you advise how i find out what the status of the ink is in the "HP 5510" machine?

    Hi,
    Please use this:
    From the Printer Home screen, touch the right directional key, and then touch the Ink icon to display the estimated ink
    levels.
    Regards,
    Note: The ink icon is similar to a drp\op of water.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • When I restart I get the following message:Completer wants to make changes. Type your password to allow this.  IS THIS FROM APPLE

    Not sure this is from Apple.  When I restart I get the following message:
    Completer wants to make changes.
    Type your password to allow this.

    Check the links below for options to remove the Adware
    http://www.adwaremedic.com/index.php
    Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support

  • How do I select/change the status of my post/reply?

    Hello,
    I'm fairly new to the forum and I'm finding it challenging to figure out how to use all the features in a straight forward manner.
    For instance,  I've noticed on my recent reply to one of my post questions that the status automatically showed up as "this solved my question".  I did not select this status and I did not see any place to select the status of my reply.  I went back to edit the reply status immediately and still saw no way to change it.
    The fact is, that my reply was not in relation to solving my question at all.  I replied to someone who offered a solution and I was replying as to the results of that solution, which did not solve my issues, it just created different issues.  So now my post shows as solved when my question hasn't been answered and the issue is not solved.
    The probabability that my question above has been asked ad infinitum is better than good, I suspect.  But when I search the quesiton in the search communities box I don't get a clear answer.  Please do excuse me then, if I am repeating an over asked question.  I'm not even sure I'm searching the forum correctly or if there are other options to search in addtion the search box in the upper right hand corner....
    Honestly, I've been on a lot of forums and am an active member of several, I'm a fairly advanced mac user, having been a mac guy for decades, and this forum doesn't appear to be very clear or easy to figure out how to use to me.  It feels as if they're almost trying to discourage you from figuring some things out...weird.  I've been searching for a clear answer for this for an hour now--trying different queries and different parts of the forum.
    Any help with how to select and change post and reply staus would be much appreciated.

    These buttons that you show were not on the post I replied to in my thread.
    You will see the buttons only, if you are the original poster of the thread, not if you asked a question in thread, that someone else started.  Also, you will not see these buttons, if you already markes answers as solved or helpful. You can mark two answers as "Helpful" and one answer as "Solved". Afterwards the buttons will vanish, see "Answering to Questions".
    Another question that comes up is, if I fail to select either button and simply reply to the post without selecting anything, what happens then?
    Then the buttons will stay, until you mark an answer. You are not obliged to mark every answer. It is up to you, how you rate the answers you receive.
    You may want to have a look at the tutorials on the main page of the ASC: https://discussions.apple.com/static/apple/tutorial/index.html
    Regards
    Léonie

  • HT2736 How do I find out the status of a iTunes card I gifted to another person via email?

    I used the option in the iTunes Store to buy a gift card for a friend.  I did this three days ago, and the email with the code has not yet arrived, nor have I received a confirmation from iTunes.  When I look at the history in the Store, there is no way to check on the status.  The whole idea was to get the gift to my friend quickly.  Three days isn't quick...

    Welcome to the Apple community.
    When you purchase a gift card for another person, it is usually delivered instantaneously by email. If that email has not arrived, then check your Your Purchase History.
    If you do not see the gift card in your purchase history, there is a good chance you have purchased it incorrectly and it has not been sent.

  • I recently updated to Firefox (desktop) 6.0.2 & love it but please can you tell me an EASY way HOW I can I get the status bar to display at the bottom so I can see the status of my downloads, safe sites & that sync is either in progress or finished.

    Windows 7 64-bit
    Firefox v. 6.0.2
    Norton 360 v.5

    Firefox has a status panel that shows you what is happening during page loading, and also shows the destinations of links when you mouse over them. The status bar showed that as well. You really do not lose that information. I found that I like the addons bar better than the status bar because I could put more buttons on it.

  • How to remove entries from the new auto-complete ?

    Firefox 33 came with a new auto-complete for forms. Unfortunately I cannot seem to delete the auto-complete suggestions once they have been stored. This is necessary functionality for things like mis-spelled words, where you want to get rid of the old (bad) auto-complete entry, or where username was changed on a form, etc. With the older versions, you could just press delete key on highlighted auto-complete suggestion and it would be removed, but this functionality does not work with the new auto-complete. The only workaround I have been able to find so far is to clear the browser history for the last 1 hour, but that wipes out good history as well as the error.

    Hello,
    Can you '''try Firefox Safe Mode''' and see if you have the same problem there? [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • How can I find out the status of my podcast feed submission?

    I submitted a podcast feed for approval 2 1/2 weeks ago. I've yet to get an approval. I got the acknowledgement email. I followed up a week ago; and they asked me to send my feed to them again for reference. Nothing. As many podcasts as they have, it seems Apple could do a lot better than sending requests into a black hole. 
    I don't have any profaniity or music under copyright in it. I"m doing reviews of a TV show so I kinda need to get going here.
    I did a podcast a couple of years ago, and it seems I got approval in like 48 hours. Super frustrated. If anybody knows how to get a status or ETA out of Apple I'd love to hear it. Thanks.

    You are not alone. A number of people have complained of a long delay after a submission is accepted. I'm afraid there isn't much you can do about it. You could try emailing support at podcasts 'at' apple.com, but you may just get a form answer telling you how to submit a podcast, which you already know.

  • I ordered prints in aperture but they never came. How can I check on the status?

    I ordered prints on Aperture. It was an expensive order.
    I got a confirmation screen but no email.
    Its now been 2 weeks so I can assume they aren't coming.
    How can I be sure? I want to cancel the order so I can print them locally.

    There is an order status link on this page that should direct you to where to find out : http://store.apple.com/us/help/print_products

  • How to - take screenshots WITHOUT the "status bar"

    Hi iPhone lovers,
    For a new application release to the AppStore, we need to create snapshots without the 20 pixel "status bar".
    Cropping the image manually is not an option because of all the language localizations...
    Thanks in advance for shedding some light on this,
    Frog Studio's team

    Well you are only talking to users here, not Apple.
    As for your request. Due to limitation no app can run in the background thus no app can be made by anybody else to take screen shots (except one can be made to take screen shot of itself).
    A simple work around is:
    Take a screen shot.
    Go to Camera Roll.
    View Image.
    Zoom in just a little bit until status bar is not showing.
    Screen shot again (as the photo app when you wait will hide everything but the image).
    Yes you lose a little bit, but that is about the best you can do.

  • Exactly how does OAM (ICM) monitor the status of services?

    Hi all,
    I would like to know how OAM (well, ICM really) monitors services.
    How does ICM check that a service is up and running? Is some sort of query send to the service that it must respond to? Or does ICM merely do a simple check to see if the service is merely "running" in memory or a "running" process.
    The reason I'm asking is because what if the service is "running" as a process but has hung. Checking that it is a currently "running" process will return that yes, it is running. But issuing some kind of interrogation request requiring a response will show that is hanging and thus not running.
    Anyone able to shed some kind of light on this for me will be greatly appreciated.
    Thanks,
    -Greg Cubitt
    Oracle South Africa

    You can put the ports that connect an important server as managed in fault managements  "detailed device view".
    DFM doesn't follow HSRPVRRP state
    Cheers,
    Michel

  • How to keep track of the status of a spry slide effect from page to page.

    Hi All,
    I'm using a spry slide effect on a simple menu system.
    Lets say I have a home, gallery and about us page.
    I currently have the spry effect occurring with "body onload" only on the Gallery page to slide down extra sub menus only when the user lands on that page.
    My problem is that I would like the slide effect to close when having left the page and landed on either of the other two pages. I can close the slide with body onload again but obviously it will close every time regardless of whether the effect was open or closed to begin with.
    I know nothing about Javascript or the Spry Framework and therefore would like to know if there is a simple way to track whether the effect was open or closed from page to page?
    Ideally I would like the effect to only open when landing on the gallery page and closing only if the previous page was the gallery page and the effect was open. For all other instances the effect should not be actioned.
    I thought that there would be a way seeing as there is a toggle option with this effect. How does the effect know when it was previously open/closed and is there a way of parsing that in the URL so that the next page knows what to do?
    Any help would really be appreciated.
    Thanks

    Sorry, but what you wish to do, will require you to at least have a basic understanding of JavaScript and setting/unsetting cookies.
    For a basic introduction to using JavaScript try:    http://www.adobe.com/devnet/dreamweaver/articles/js_for_designers.html
    HTH
    PZ

  • How to edit LOV of the status field in activity record type?

    Hi experts
    I just want to edit the list of values of status field in activity record type, it is a read only filed, can anyone tell me if it is possible to edit? seems like it is referenced from a field called "EVENT_STATUS";
    Thanks,
    Tiger

    Tiger, at this time it is not possible to edit the values in this field.

  • HT2404 Although I have selected the recent OS X 10.8.3 update several times, waited for the installation to take place, then Restarted at the prompt the App Store still shows the update to be outstanding. How can I tell if the update has completed?

    When I choose 'About This Mac' from the Apple pull down, I get a pop up that says I'm only updated through version 10.8.2... My question has changed - why is my iMac not taking the 10.8.3 update?

    From several others:
    Download the OS X Mountain Lion Update v10.8.3 (Combo) at
    http://support.apple.com/kb/DL1640
    This worked for me...

  • How do you know if the battery is completely dead?

    I'm pretty sure that my iPod Shuffle's battery is completely dead. Even though I charged it longer than the alotted time there's no charge and the indicator light doesn't come on.
    How can I replace the battery?

    If the battery check light shows nothing, and the front status light is similarly dead, then you can assume no power. That could certainly mean a dead battery.
    The battery is not a user-replaceable item. Apple's official solution is provided through the battery replacement program, which you can find discussed and described on the iPod Shuffle Support Page and elsewhere.
    I think you'll find the price delta between that and simply buying a refurb isn't that great. Something else to keep in mind is that that's what you're doing anyway; you don't get your own machine back.
    You can open the Shuffle up and try replacing it yourself, if you like. It will involve some fine work and some soldering, but some have claimed success. There are now sources for the batteries themselves. Guidance for all of that can be found online.

Maybe you are looking for