How to restore a 2GB Nano and delete all old tunes?

I allowed my Nano to run down and let its charge drain. Haven't used her in months. When I went to power up, she was konked out. I tried to put some stuff on her from my iMac Core Duo but there is 'too much' so says the iTunes wizard. So I chose some playlists.
Apperas as though iTunes is saying that there is some 549.3 MB used with 1.29 GB remaining on my 2GB Nano. I do not see any songs on the Nano or on the iTunes playlist for trhe Nano. What is taking up all of my 549.3 MB? I'd like to delete that before I start loadng the Nano or is it default stuff?
Is there default data of 549.3 taking up room on her or am I missing something and if so how do I clean it out?
Thank you!
iMac 2.0 GHz Intel Core Duo 20" 512MB (early 2006)   Mac OS X (10.4.7)   iBook G4 OS X 10.4.8 256MB

Try restoring your iPod. Restoring will erase the hard drive, reload the software and put it back to default settings.. Once the restore is complete follow the on screen instructions and it should connect to iTunes and give you a prompt to automatically update your library onto the fresh installation. If you want to update manually or using selected playlists choose no and it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7

Similar Messages

  • HT3702 How do I stop a payment and delete from I tunes

    how do i stop a payment and delete payment for the future. Also stop current payment.

    Stop and delete a payment for what, a song, pre-order, auto-renewing subscription, iTunes match ... ?
    If an auto-renewing subscription then there are instructions on this page for managing and stopping them : http://support.apple.com/kb/HT4098
    iTunes Match : http://support.apple.com/kb/HT4914

  • New library has been created and deleted all old photos

    After the update I was asked something about creating a new library, then there was a countdown and the iphoto app is now empty of all photos.
    I have checked whether it has just created a new library but it hasn't, I also cannot find my iphoto library anywhere not Macbook.  Photos from over four years have simply vanish ... please help!!!

    No, there is absolutely no sign of them!
    do you know what the string would be to do a search i.e. ; .jpg or .doc etc...

  • ITunes 10.2 doesn't replace and delete the old file

    i'm using iTunes 10.2 for Windows 7 32bit, when i replace the old .ipa files with the new version .ipa files it doesn't delete the old .ipa, so i have 2 .ipa files, this is bug or not? if not, how can i setting to replace and delete the old .ipa version?

    iTunes v10.2.1 doesn't fix this issue and nobody answer this nubie question

  • Will someone tell me what happen to my play list and how I can restore or get it back!  Apparently, apple for the second time to screw up and delete all my music again!!!

    Will some explain why apple for the second time manage to screw up and delete "all my play lists and music again"!   How can I restore it or get my music back...  If I can't get my music back the way it was the last time I used itunes I will sale both my ipod touches!!!

    Just what were you doing when it happened?
    Just sync it from your iTunes library.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Ive restored my Ipod nano and the songs that I've already purchased are now not syncing to my device. How do I get those songs back on the nano?

    Ive restored my Ipod nano and the songs that I've already purchased are now not syncing to my device. How do I get those songs back on the nano?

    Either redownload them directly to the iPod by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    or sync them to your iPod via iTunes
    iTunes: Syncing media content to iOS devices and iPod            

  • HT1339 I have to restore my ipod, will it delete all of my data, if so how can I back it up???

    I have to restore my ipod, will it delete all of my data, if so how can I back it up??? My ipod won't let me delete any photos, or download any apps, so I turned it off and back on when the itunes and usb symboyl appeared I just download Itunes, and i can only restore it, Will it delete everything?!?!

    Yes, you need to restore. Here is how:
    Plug your iPod into a computer with iTunes
    Go into your iPod's section on the bar on the left hand side of iTunes
    Click restore
    Confirm the restore with the dialog boxes that pop up.
    When it is done, if you have a recent backup of your iPod in iTunes, you can tell it to use it.

  • Can anyone tell me how to restore my itunes library and playlists? After I downloaded mountain lion my library is missing and my devices can be synced to only one library ...the missing one

    can anyone tell me how to restore my itunes library and playlists? After I downloaded mountain lion my library is missing and my devices can be synced to only one library ...the missing one

    That .itl file actually is the library -- at least the critical part of it although the library is actually many files and folders.
    Try starting iTunes and immediately hold down the option key.  When it asks, guide it to the .itl file.
    It's really hard to say without being able to poke around your computer.  Upgrading should not delete the old library, but still it happens to the very, very few which is why we make backups before updating.  If the old library file is gone then so are your playlists.  You can always see if the following is of any use:
    iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451

  • My Iphone 5 screen is cracked and I need to restore to factory settings and wipe all content.  How do I do that?

    My Iphone 5 has a screen that is cracked and cannot be read.  I need to restore the factory settings to send it back to the warranty company.  Please tell me how to do that through Itunes

    Restore your iOS device
    Connect your iOS device to your computer using the cable that came with it.
    Select your iPhone, iPad, or iPod touch when it appears in iTunes. In the Summary pane, click the Restore button for your device.
    Click Restore again to confirm that you want to restore your device to factory settings and delete all data and content. iTunes will download the iOS software file and restore your iOS device.
    After your iOS device is restored to factory settings, it will restart, and you’ll see the "Slide to set up” welcome screen. Follow the steps in the iOS Setup Assistant. You can set up your device as new or using a previous backup. If your iOS device has cellular service, it will activate after you restore. your welcome

  • Hi, I have an e-mail account no longer valid, I need to move my contacts to a new e-mail account and delete the old one.  How, help?? Phone is a 3GS

    Hi, I have an e-mail account no longer valid, I need to move my contacts to a new e-mail account and delete the old one.  How, help?? Phone is a 3GS

    So the answer to my question is yes - from an old Exchange account that was provided by a previous employer.
    If so, you can't.
    You can't merge or transfer contacts that were synced over the air with an Exchange account with another account, and the same for syncing the contacts direct with a supported address book app on your computer. This is how most employers want it.

  • Need to know how to get my apple account to sync up with a new email on my phone and delete the old one in a step by step process??

    Need to know how to get my apple account to sync up with a new email on my phone and delete the old one in a step by step process??

    After you change the account settings as I described below hold your finger on any app until they all wriggle, then tap the "-" on each purchased with her Apple ID. Press the HOME button when done. Then go to the App Store and buy or download the apps you want.

  • Can someone tell me how to restore my App Store and iTunes Apps on my iPad 2?

    Can someone tell me how to restore my App Store and iTunes Apps on my ipad 2?

    If you had a backup either in iTunes or iCloud of the iPad you can restore from it by following this article:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If not you can go into the Purchased section of the App Store App, and download your Purchased Apps from there for free. However their data will not be restored.

  • Since you can no longer backup to disk, how to restore from external drive without losing all ratings and playlists

    since you can no longer backup to disk, how to restore from external drive without losing all ratings and playlists?

    My own opinion is that you should install the later appropriate version of Silverkeeper. That said, I would in fact recommend if you can wait a few days for an answer, that you email the La Cie Silverkeeper backup team via the email link on the site at http://www.lacie.com/silverkeeper/
    They are careful to say they are not officially providing a backup service, but when I emailed them with a query regarding usage about a year ago after downloading Silverkeeper for myself, I got a reply within a couple of days that cleared up my question.

  • When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!

    When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!

    Hi,
    I would suggest you to uninstall Adobe Reader using the cleaner tool and then re-install the latest version.
    Adobe Cleaner Tool:- Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs.
    Latest version of Adobe Reader:- http://get.adobe.com/reader/
    If you still experience the same issue, please share the following information:-
    - Screenshot of Adobe Reader showing printer options
    - Screenshot of Microsoft Word showing printer options
    - Screenshot of control panel- Control Panel\All Control Panel Items\Devices and Printers
    Regards,
    Nakul 

  • How to copy/paste anchor text box to its anchor point in text and delete all empty anchors?

    hi all
    i have a document of few pages but one story. The right column is the main text box and on many places anchored text boxes are placed which appeared on the left column as shown below.
    i want text of each anchor-text-box to be cut from its place and paste at its insertion/anchor point and delete all empty anchored boxes.
    I am trying since morning but i unable to reach anchor object reference. Any help on how to start with will be helpful.
    virender

    Ok, let's say you have one main text box (not anchored) and three text boxes that are anchored to text within it. The first one is anchored with text, the second one is unanchored, and the third one is empty (I'm not going to get into inline anchoring vs. custom anchoring since you didn't bring it up in your post).
    We cycle through the items on the page:
    function main(){
      var myDoc = app.activeDocument;
      var myPages = myDoc.pages.everyItem().getElements();
      for (var i = 0; i < myPages.length; i++){
        var myPage = myPages[i];
        //Checks that the page is valid, and that it is not a master page. If either is true, skips to the next page.
        if (myPage.isValid == false) continue;
        if (myPage.parent instanceof MasterSpread) continue;
        var myItems = myPage.allPageItems;
        for (var j = 0; j < myItems.length; j++){
          //Current item.
          var myItem = myItems[j];
          //If myItem doesn't have a Character parent, it is not anchored.
          //The first and third text frames would fail this test.
          if (!(myItem.parent instanceof Character)) continue;
          //We only care about text frames.
          if (!(myItem instanceof TextFrame)) continue;
          //I think the only way this would happen would be if you had an image or
          //something else unexpected within the frame. I check for it so no content
          //is inadvertently lost.
          else if (myItem.texts.length > 1) continue;
          //If we're still in this iteration of the loop, all qualifications are met.
          //Flatten the text frame.
          //I don't use layers that often so, to me, flatten makes sense. You may want
          //to use a different term if there's a chance for confusion.
          flattenItem(myItem);
    function flattenItem(funcItem)
         //Hold onto the anchor character.
        var myParent = funcItem.parent;
         //Duplicate the text from within the frame so that it appears right after the anchor.
         //There may be other methods, but this works for me. I try to avoid copy/paste
         //so as not to deal with any clipboard mishaps. I added a check in case of empties.
         if (funcItem.texts.length > 0){funcItem.texts[0].duplicate(LocationOptions.AFTER, myParent.insertionPoints[0]);}
         //Replace the anchor character itself with a space (or whatever) which also
         //deletes the text frame it was anchoring.
        myParent.contents = " ";
    I guess the takeaway might be that you're not looking at the main text frame and then checking to see if anything is anchored to it. You're looking at each text frame and figuring out if it is anchored. That's my approach, anyway.

Maybe you are looking for

  • Camera lock screen iPhone 5S not working properly after upgrade to iOS 8.1.3

    Actually, i upgrade my iPhone to 8.1.3. What i am trying achieve is, when my iPhone is locked i just need to access my camera without login. When i open camera when my iPhone is locked, camera displays for 2 seconds and then my screen will be black.

  • How should I deal with exceptions?

    I have three possible choices that I see: (1) Deal with them in an exception handler class. Use try/catch/throw in the class. Have throw call a method in the exception handler class. (2) Use try/catch/throw and handle the exception in the same class

  • Problem with banking website

    my ipad will not access my on-line banking  my customer service rep said it was not a problem w them

  • Can someone please help? I need to delete an app but do cannot access the phone

    I have an android device that registers on verizon as a samsung fascinate for my old phone number (number hasn't been active since early february). I attempted to download an app a few minutes ago to speed up my phone, but the app screwed up and will

  • Brush Tip Shape option grayed out, can't uncheck it.

    The "wet edges" selection in my "brush tip shape" options is grayed out. I can't de-select it from the left side of the Brush window.  I've tried closing and re-opening Photoshop, and re-booting my computer, but it comes back the same way every time