How to restore a class after I delete it?

Hi,
I deleted a class incorrectly. Can I restore it? It's very important for me. Thank you very much!

Hi,
You might have to retrieve sections of the class one by one. I am not aware if you can get the class in one shot.
Go to SE24
Utilities --> Versions --> Version Management and you will different objects there.
Display the versions, SELECT the previous than the current one and CLICK on RETRIEVE.
You might have to do this for each object of yours. IF you cannot see that at all in your DEV system, then, you probably can check with the BASIS team to transport that object from QA / PROD to DEV.
I think you will have to go with BASIS team.
Regards,
Ravi
Note : Please mark all the helpful answers

Similar Messages

Disk utility does not allow to restore Macintosh HD after I deleted a small size (1GB) partition

Hi, when I tried to create a new 1GB partition (on my Mac mini 2011, using Mac OS X 10.7.3) and then to delete it I could not restore (increase) Macintosh HD size using Disk utility (diskutil list shows the same value for Macitosh HD (498,17GB) partition before and after I deleted a new created 1GB partition).
Please help, how I can restore the original size of Macintosh HD when Disk utility does not allow to restore Macintosh HD after I deleted a small size (1GB) partition?
Thank you.

The bottom right corner dragging does not help in my case, because it shows that Macintosh HD partition size is maximal, but its real size did not change after I removed 1GB partition.
Maybe any other idea can help me, for example some built-in tool like diskutil which allows to view and manage unused partitions in terminal?
Thank you.

HT4061 How to restore my ipad after downloading itunes?

How to restore my ipad after downloading itunes?

Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring:
Verify that you are using the latest version of iTunes.
Back up your device.
Transfer and sync content to your computer.
Restoring your iOS device
Connect your device to your computer.
Select your iPhone, iPad, or iPod touch when it appears in iTunes. Select the Summary tab, and click the Restore button.
Click Restore.
After a restore, the iOS device restarts. You should then see "Slide to set up". Follow the steps in the iOS Setup Assistant.
If needed, restore your device from a previous backup.
If restoring does not finish successfully or if a restore error appears, see iOS: Resolving update and restore alert messages.
Additional Information
If your device is continually restarting, not responding, or showing the Apple logo with no progress bar or a stopped progress bar, place the device into recovery mode and try restoring again.
Devices with cellular service should activate after a restore. If activation is not successfu, see the options below.
Symptoms
Your iPhone may display one of the following messages when you attempt to activate it:
"Your iPhone could not be activated because the activation server is temporarily unavailable."
"The iPhone is not recognized and cannot be activated for service."
"iTunes was unable to verify your device."
Resolution
Perform the following steps if you receive one of the messages above:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Applefor assistance.

How to restore iTunes library after operating system changed?

How to restore iTune library after operating system changed on the laptop? The syn is not working because it doesn't recognize the computer.

Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
Sync Your iOS Device with a New Computer Without Losing Data - How-To Geek

How to restore safari bookmarks after osi update

how to restore safari bookmarks after ios. update

The only way is to restore from a useful backup, if you have one.
If you sync the iPad to iTunes and use Time Machine regularly, you would likely have the appropriate backup to restore from. In that case:
Restore the iPad backup set from Time Machine from a date before you overwrote the bookmarks. The location of the backup is ~/Library/Application Support/MobileSync/Backup/ (you can get to it by pressing Cmd+Shift+G in the Finder and entering this path).
Connect the iPad, run iTunes and restore from the backup.
If you use iCloud Backup, then you can restore from iCloud and choose which date's backup you'd like to restore from. You can check if you're using iCloud Backup by opening the Settings app on the iPad, then going to the iCloud submenu and looking at the status right below "Storage & Backup", where it would say "iCloud Backup is off." (or "iCloud Backup is on.", as the case may be).
In any case, keep in mind that restoring from a backup means you lose all application data changes after the date of the backup.
Also see Restoring from a previous iCloud backup.

How to restore purchased ringtones after IOS 8 update

I have iPhone 5c. After I did the IOS 8 update and then the ios 8.0.2 update, I no longer have my purchased iTunes ringtones (I only have three that I purchased). It shows I purchased them in my iTunes store and my music icons on my phone. But when I go to settings and sounds and tones, they are not there. Trying to figure out HOW to restore them to my iPhone.
Help? I am an idiot, so I would appreciate step by step directions. Thanks!

Hi suebeehoney0508,
If you are having issues syncing your ringtones back to your iPhone after a recent update, you may find the following User Tip helpful:
How to sync ringtones to your iPhone | Apple Support Communities
Regards,
- Brenden

How to restore illustrator file after crash?

how to restore adobe illustrator files after crash OS win 8, and I could backup

To enable us to help you better, you need to provide as many details as you can about the problem you are experiencing.
If you design your question effectively, you can get good information from people who are knowledgeable about the topic and who are happy to help you.
Prepare your question. Think it through. Hasty-sounding questions get hasty answers, or none at all.
What troubleshooting have you done so far?
Asking an effective question will get you help faster read how here
Suggestions for asking for help on a site.
http://www.catb.org/~esr/faqs/smart-questions.html
Wanikiya and Dyami--Team Zigzag

How to restore photo file after empty trash

photos file have been deleted and trash is empty. please advise how to restore. many thx! cheers

Hey there TizJacky,
If I understand correctly there were pictures in your Mac OS trash which has been emptied, and want to restore them. In order to do this, you would need to have had Time Machine setup and backing up your computer before this occurred. This article will help you out if you did:
Mac Basics: Time Machine backs up your Mac
Thank you for using Apple Support Communities.
All the very best,
Sterling

How can I uninstall photoshop after accidentally deleting it without uninstalling first?

How can I uninstall photoshop elements 9 after accidentally deleting it without uninstalling it first? I need to uninstall it because both licenses are used.

Just so you get the right tool, here is the link to Adobe's CC Cleaner Tool: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Benjamin

My contect number is delete how to restore, my contect number is delete how to restore

How to restore my contect phone nombar pls give me sum advise

How to restore my contect phone nombar pls give me sum advise

HT4113 how to restore aa ipod after its been disabled

i have old ipod that i am tring to restore but its been disable due to to many wrong passwords. how can u restore the ipod to the origianl state if you cant get into it to restore it.

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

TS1538 Advise how to restore Ipod and prevent music deletes?

My 80 GB IPOD erases all music everytime connected to PC(I-tunes) - Advise how to restore and prevent reoccurence?

?? have extensive music files on my PC, but IPOD shows no music but also shows no space available. PC doesn't recognize IPOD but also won't reformat it. Itunes doesn't show the IPOD connected.....what next? Appreciate any help!

How to restore Browsing History after it has been deleted.

I need to restore the Browsing History of my computer. Once the history has been deleted, is it possible to find the information anywhere else on the computer?

Hi.
After create_column method you have to create cl_salv_wd_uie_text_view object:
data:
    " Variables para configurar los ALVs.
    lr_alv_config_table type ref to cl_salv_wd_config_table,
    lr_lr_wd_table_usage TYPE REF TO if_wd_component_usage,
    lr_wd_table          TYPE REF TO iwci_salv_wd_table,
    lr_table_settings    TYPE REF TO if_salv_wd_table_settings,
    lr_column_settings   TYPE REF TO if_salv_wd_column_settings,
    lr_column            TYPE REF TO cl_salv_wd_column,
    lr_text              type ref to cl_salv_wd_uie_text_view,
    lr_header type ref to cl_salv_wd_column_header.
" Initialize variables
lr_lr_wd_table_usage = wd_this->wd_cpuse_alv_1001( ).
if lr_lr_wd_table_usage->has_active_component( ) is initial.
    lr_lr_wd_table_usage->create_component( ).
endif.
lr_wd_table = wd_this->wd_cpifc_alv_1001( ).
lr_alv_config_table = lr_wd_table->get_model( ).
lr_column_settings ?= lr_alv_config_table.
lr_table_settings ?= lr_alv_config_table.
" Delete Column.
lr_column_settings->delete_column( 'OBJID' ).
" Create column.
lr_column = lr_column_settings->create_column( 'OBJID' ).
create object lr_text.
lr_text->set_text_fieldname( 'OBJID' ).
lr_column->set_cell_editor( lr_text ).
" Change the header of the column.
lr_column->GET_HEADER( receiving value = lr_header ).
if lr_header is bound.
    lr_column->delete_HEADER( receiving value = lr_header ).
endif.
lr_column->create_HEADER( receiving value = lr_header ).
lr_header->SET_TEXT( exporting value = 'Objid Field' ).

How can restore the memory after deleting parallels?

I recently deleted my paralles program and wonder if the memory that it had been taking up has now been restored to my computer or if it is still partisioned off. I ask this because when I installed paralles, my mac asked me how much memory I wanted to give to paralles.
Thanks for your help!

Some ways to get space
You can first remove seldom used apps. If you decide later you want them back you can always download them again. You can also download the Dropbox app and off load some of your little used pics and files to open up space. The app is free and you get 2 gb of free storage and if you get friends to install Dropbox they will give you 500 extra mb for each friend who installs it. Many apps will let you save direct to Dropbox.

How to restore Windows boot after resizing system partition ?

I have an fairly new HP Pavilion 14-n228ca notebook which I intend to use mostly for Linux, but still wish to occasionally run the WIndows 8.1 that it shipped with.
I installed CentOS 6.5 using the dual-boot procedure I have used many times in the past with XP and Vista, viz. resize the main NTFS filesystem, delete the partition and recreate it smaller at the exact same start byte.
Normally (on XP,Vista) Windows boots from GRUB, but here I get an error "file \Boot\BCD - missing or contains errors"
F9 at boot gets me a hardware boot menu, where I have a choice of "OS boot manager", EFI file, or "notebook hard drive". The last gets me GRUB. The first drops me to a repair menu where I can try autorepair, which fails, or a command
line.
The command line allows me to run diskpart and assign a drive letter to the system partition, at which point I can run chkfs successfully and access files.
If I try "bootrec /rebuildbcd" it finds one valid volume at \\?\GLOBALROOT\Device\HardDiskVolume4\Windows but then says "system cannot find the file specified"
How can I restore the ability to boot the Windows partition, preferably without messing up the Linux one ?

I have an fairly new HP Pavilion 14-n228ca notebook which I intend to use mostly for Linux, but still wish to occasionally run the WIndows 8.1 that it shipped with.
I installed CentOS 6.5 using the dual-boot procedure I have used many times in the past with XP and Vista, viz. resize the main NTFS filesystem, delete the partition and recreate it smaller at the exact same start byte.
Normally (on XP,Vista) Windows boots from GRUB, but here I get an error "file \Boot\BCD - missing or contains errors"
F9 at boot gets me a hardware boot menu, where I have a choice of "OS boot manager", EFI file, or "notebook hard drive". The last gets me GRUB. The first drops me to a repair menu where I can try autorepair, which fails, or a command line.
The command line allows me to run diskpart and assign a drive letter to the system partition, at which point I can run chkfs successfully and access files.
If I try "bootrec /rebuildbcd" it finds one valid volume at \\?\GLOBALROOT\Device\HardDiskVolume4\Windows but then says "system cannot find the file specified"
How can I restore the ability to boot the Windows partition, preferably without messing up the Linux one ?
assuming your recovery partition is still extant, you can run that and go back to factory
backup files first natually
use a virtual machine linux or cloud
Corsair Carbide 300R with TX850V2
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 660 Ti FTW Signature 2 (GK104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Professional x64
Microsoft Wireless Desktop 2000 & Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play!

How to restore a class after I delete it?

Similar Messages

Maybe you are looking for