How to restore audio in iOS 8 (beta 5) after requesting mic access?

I posted this question over on StackOverflow before realizing that the AIR team might be working on a fix: http://stackoverflow.com/questions/25168882/air4-how-to-restore-audio-in-ios-8-beta-5-afte r-requesting-mic-access
In a nutshell, requesting microphone input in iOS 8 will terminate all audio if it's done AFTER a sound has already been played, but not if it occurs before (sample code is in SO post).
Apps were tested using an iPad 3 the Flex 4.6.0 SDK with AIR 4.0, and with AIR 14.0 - the same behaviour was exhibited.
This poses serious problems for our apps, which are already released and being updated for iOS 8, so please let me know if this is a known issue, and if not, whether you're able to confirm from your side.
Thanks!

Yes, exactly the same flow on our side - interesting to know that it's FLV as well.
My problem remains, though: in iOS 8, if I play a sound (via MP3, SWF, etc) and then check the mic, all further sound in the application stops indefinitely until I close/reopen the app. Since we need to record audio at various times in the app, this will cause a major problem for our users!
I've added a bug in the hopes that someone can verify the problem: Bug#3801262 - Requesting microphone access in iOS 8 (beta 5) terminates all further audio
Thanks!

Similar Messages

  • I am use iphone 4s i have upgrade ios 8.1 i have problem in ios 8.1 pls guide me how to restore 7.1 ios pls guide

    i am use iphone 4s i have upgrade ios 8.1 i have problem in ios 8.1 pls guide me how to restore 7.1 ios pls guide

    It isn’t possible to downgrade the device. Look for solutions which don’t involve doing so, or post the problem you’re having on these boards.
    (120235)

  • How do restore factory settinngs ( macbook pro retina) after i used migrate wrongly

    how do restore factory settinngs ( macbook pro retina) after i used migrate wrongly. and want to start from the original

    Use Lion Recovery to reformat the drive.

  • How to restore the appearance of this message? "Requested an encrypted connection to a page [...] Probability of read data [...] [Optional] Always warn me before [...]" Is disabled by default and now I have it shut off permanently.

    Hello!
    I have a problem, because when the message appeared:
    (original)
    "Zabezpieczenia
    Zażądano połączenia szyfrowanego ze stroną, która zawiera elementy niezaszyfrowane.
    Prawdopodobieństwo odczytania przesyłanych danych przez osoby trzecie jest duże.
    [Opcja] Zawsze ostrzegaj przed nawiazaniem połączenia szyfrowanego ze stroną zawierającą elementy niezaszyfrowane."
    (in translation)
    "Security
    Requested an encrypted connection to a page that contains the elements unencrypted.
    Probability of read data transmitted by third parties is large.
    [Optional] Always warn me before you make an encrypted connection to the page containing the unencrypted parts."
    option "Always warn ..." is disabled by default and by chance it shut off permanently.
    How to restore the appearance of this message?
    Sincerely,
    Jadwiga Zabagło

    Hello!
    I have a problem, because when the message appeared:
    (original)
    "Zabezpieczenia
    Zażądano połączenia szyfrowanego ze stroną, która zawiera elementy niezaszyfrowane.
    Prawdopodobieństwo odczytania przesyłanych danych przez osoby trzecie jest duże.
    [Opcja] Zawsze ostrzegaj przed nawiazaniem połączenia szyfrowanego ze stroną zawierającą elementy niezaszyfrowane."
    (in translation)
    "Security
    Requested an encrypted connection to a page that contains the elements unencrypted.
    Probability of read data transmitted by third parties is large.
    [Optional] Always warn me before you make an encrypted connection to the page containing the unencrypted parts."
    option "Always warn ..." is disabled by default and by chance it shut off permanently.
    How to restore the appearance of this message?
    Sincerely,
    Jadwiga Zabagło

  • How to restore a deleted iOS Keynote file on iCloud?

    Ok -- i screwed up.
    heres my setup:
    iPad 1 (iOS 5.01), iPhone 4 (iOS 5.01), MacBook Air Core i7 (10.7.2)  <---- synched to -----> iCloud
    I use Keynote daily and have presentations synched between all my devices.  I accidently deleted a keynote file on my iPhone... and within minutes it was deleted on iCloud and my iPad.
    I had a look on my MacBook Air to see if i could find anything in "~/Library/mobile documents/com~apple~Keynote/Documents" there was nothing to be found as expected. I even looked in "~/Library/mobile documents.deleted" -- but i couldn't even find this folder.
    SO. Next Step.  Restore from iPad backup.
    My iPad backups occur everynight into iCloud.  I tried to restore from the 3 backups stored in iCloud.
    After restoring from the iPad backup -- i strarted up Keynote and briefly for about half a second, i could see the 2 deleted documents (greyed out)... but then they disappeared.
    I even tried deleteing iCloud document synching immediately after the backup -- but then when i startup Keynote it says that that my documents have been moved to iCloud, which i can access after enabling iCloud.  Duh.  Hello.  I want to restore the documents from the Backup.
    I have spent 4-5 hours with some helful apple support guys -- but there seemed no solution to this problem.
    1.WHat are my options?
    2. Why can't i restore a Keynote file from my iPad backup (regardless if it was deleted in iCloud).
    This is  MAJOR bug with iCloud.  And i need to get to the bottom of this with Apple.

    Your suggestion about Time Machine is noted -- and i think good advice for the future although i think most users would be rather confused on the usefuleness of Time Machine when dealing with iCloud synching with iOS devices.
    Its far from obvious on how to access those iOS/iCloud synched documents on OS X Lion.
    But the question remains:  If a file is deleted in iCloud -- should you be able to restore it from an iPhone or iPad backup?

  • How to restore Audio to default settings??  MacBook Pro late 2011

    I am attempting to hook a tape deck (componant...relies on receiver for volume).  I had everything fine, but the audio was really low through the Mac no matter which setting I put it on.  I then downloaded an app called HEAR....as I read it can help boost the volume on a Mac.   It didn't work and I uninstalled it. 
    I changed the jack settings back to output and plugged earbuds in, but now, ANY audio sounds distorted as if it were being played in a can!  I tried another set of earbuds thinking it was the issue:  it's not. 
    SO..I am guessing the software did something and I just can't figure out how to get back to the original settings.
    Any insight would be appreciated!! Thanks in advance!
    Carrie

    What do you suggest then ?
    I suggest troubleshooting the problem instead of just guessing what has to be done. Since you're within 90 days of purchase, you're eligible for phone support from AppleCare.
    Stop the secure erase. Quit Disk Utility and either restore from a Time Machine backup or run the Installer. You don't mention whether you have a backup. I hope you do, because otherwise your data is lost beyond any hope of recovery.

  • Satellite A80: How to restore audio and video codecs?

    How can I restore the audio and video codecs which are installed by default on my Satellite A80 with XP Home edition?
    I removed them in safe mode because of a problem with the Pinnacle Codec installed by Pinnacle Studio 10.
    Now I need to set the standard audio en video codecs back.
    I already downloaded the codec package from Microsoft Mediaplayer and have sound en video again in Media Player.
    Unfortunately I still don't have sound in Toshiba Diagnose Program when testing Midi and Wave sound.
    System restore came up with the message that restore was not possible because no changes had been made.
    Message was edited by: roel

    Have investigated in the forum and found this different codecs:
    -Zsunami Filter Pack: (3.9.9)
    - Nimo Codec Pack: (5.0 Final)
    - ACE Mega CoDeC Pack: (5.93)
    - Codec Pack Elisoft: (13.505)
    - K-Lite Codec Pack: (2.2) Full
    - SLD Codec Pack: (1.5 Pro)
    - All in One: (5.0.6.1)
    - The Codecs: (1.1 full)
    Well, if the system restore does't work try to install one or several codecs from this list.
    Have found it in this posting:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=12068&messageID=44047
    good luck

  • How to restore from Ipad iOS 7 to Ipad iOS5

    My old Ipad was dropped and has a green screen, it is iOS7 and I have just bought a new Ipad which is iOS5. It won't let me restore from iCloud on setup because of the different iOS. What is the easiest way to get around this please?

    You are most welcome

  • How to restore audio video sync in media file

    I captured some clips from my Mini-DV Panasonic PV-GS320. Some clips were in sync but a couple were off. I unlinked audio and video and slid the video later by about 20 frames and it sounded fine. But I need a media source file that I can edit from.
    Is there a way to modify the media file or generate a new media file that is in sync? If I export a new movie is there a specific format I should use?
    I recorded 12 bit audio and imported it at 32 KHz.

    Could the bad ones have been shot at 16bit ?
    No. I recorded them all together in one session. All I did was hit the record button on and off. When I tried to capture the entire 30 minute session it crash at the end when doing some audio processing. So I captured it in 3 clips. The middle clip was in sync and the beginning and end clips were not.
    I actually have two questions:
    1) How can I fix the sync in the broken clips? I have recaptured the clips and get the same out of sync result.
    2) How can I avoid this problem in the future?
    I have recorded and captured several movies using the same gear and SW and never had this problem before.

  • HT6010 How to restore Siri in iOS 7.03?

    As soon as I installed iOS 7.02, I got a note that 7.03 needed to be installed on my iPhone 4S. But Siri doesn't work in 7.03. You hold the button and get the Siri prompt screen, but it is frozen and doesn't respond. You can exit by hitting the button again, but that's all you can do. Is there a fix for this or do we have to wait for apple to fix it in 7.04?

    Siri works fine in 7.0.3. It is your device that has the issue OR there was an issue with the download when you updated.
    Try general troubleshooting like restarting the device, Toggle siri off and then back on, Most likely you will want to backup the device and restore it in itunes.

  • How to restore audio to iPad

    LOst sound to most apps. ITunes working fine

    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted. You will still have sound in the music app if this occurs.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • How to restore calendar items from Entourage 2008 after upgrade to Lion (10.7.5)?

    I held off upgrading to Lion because I had a bunch of old email I wanted to convert first. But now that Apple is no longer offering security updates for Snow Leopard, I decided to take the plunge. Unfortunately, after the Lion upgrade most of my calendar items in Entourage 2008 disappeared (and those that remained appeared in duplicate).
    I think I should be able to access an uncorrupted version of my Main Identity folder for Office 2008 … because I have an Automator workflow that creates a daily backup, and that backup should be available through Time Machine. I turned off Time Machine after this calamity so that I wouldn't overwrite my Entourage Backup folder.
    I need the July 8 or 9 version of:  ~ / Documents / Entourage Backup / Main Identity.
    But when I select the Entourage Backup folder and open Time Machine, all the Finder windows behind the current one go dark and I can't move backward toward an earlier date (I've done this with Time Machine turned off and on). This makes me think the Entourage Backup folder has not been getting backed up recently, or perhaps ever. Ugh.
    When I check my Time Machine preferences, only the following items are shown as excluded from backups:
    So it seems I should be in the clear and able to access Entourage Backup.
    Any idea what I'm doing wrong in trying to restore from Time Machine? Or anything else I might be doing wrong?
    Many thanks.

    When I check my Time Machine preferences, only the following items are shown as excluded from backups:
    Not sure how any of this relates to a Time Capsule....one of the hardware products that we support in this forum.....but we will try to help.
    Main Identity is located as follows on your Mac:
    Macintosh HD > Documents > Microsoft User Data > Office 2008 Identities > Main Indentity
    Unfortunately, you have been excluding Microsoft User Data from your backups, so there is nothing to recover or restore.

  • How to restore package contents for preview.app after Mac OS X Lion upgrade

    since installing Mac OS X Lion I have been totally unable to run Preview.app. After having attempted to troubleshoot the problem I discovered that the package contents for the Preview application no longer existds on my hard drive. Does anyone know where I can obtain a another copy of the preview application? or how I might go about restoring the package contents for Preview in order to run Preview.app?

    Use Pacifist to extract it from the InstallESD.dmg residing inside the Install Mac OS X Lion.app.

  • How to restore deleted playlists to an itouch after syncing with wrong device. Tried to search for device to restore under devices and it completely removed it as a device on itunes. Is there anyway to get the information back?

    To start we have several users and devices on our itunes account....Several weeks ago I was using my itouch to create playlists for a few aerobics classes that I teach.  Right before I was about to unplug the itouch I got a notification that my itouch was full and didnt have any space left.  Since I was done with what I was doing at the time, I unplug my itouch and figured I would delete unwanted songs later to create more room. A week later, I went to sync my itouch into itunes and over the devices it told me that it was named another device and wanted to know if i wanted to sync the information to my itouch I had just plug in.  I had never seen this message before in all the other times I had used it, and at the time I didnt realize that it was giving my device the name of another user in my house. Without realizing it itunes started to sync the new information to my itouch.  I immediately unplugged the usb cable stopping the process.  I then replugged the usb cable in, hoping to get done what I needed to get done on my itouch thinking it might have just been a strange glitch. Also, since I hadn't notice any change on my itouch from the incorrect syncing, I continued to start itunes again.  This time it asked me the same question as before "did I want to sync the information from another ipod?". Since I didnt notice any changes before I just let it do the syncing not realizing at the time that it was earsing all the info I had on my itouch and replacing it with info coming from the other users ipod.
    I contacted Apple and they gave me infomation on how I could go look for my itouch under devices and get the information back.  When I did this my itouch was no longer there under the devices and it was replaced with the new name that itunes had given my itouch.  This device is one of the first generation itouches and has never been backed up that I know of... So my question to you all is...Is there any way of getting my playlists back???? I spend countless hours creating these playlists for my classes and have been completely out of my mind trying to figure out how I can possibly get the infomation back. Please let me know if you think there might be a way to do this!!!     

    The devices that are listed are: 2 under the name of the device that synced incorrectly with mine and then 3 others that are not associated with my itouch. The name of the ipod, before the incorrect sycning is no longer under devices.  It has been replaced with the incorrect one because I can see the serial # of my ipod under the wrong name.
    The playlists that are in my itunes library are from an ipod that I used a few times before I took this one over... Which happens to be the ipod that took on the ID of my itouch.
    Both of these ipods used to be my kids.. I used my sons a few times and then switched to my daughters.  They each had their names attachted to their particular devices and now it just says my sons, which is the ipod that itunes was connecting to when all this happened. The really strange thing is my son doesnt use his ipod any longer and now uses his phone for music...So, it had been a while since that particular device was even synced to itunes!
    I hope this helps!

  • How to restore Files including Photos, Contacts.etc after wiping out in the absence of performing any back up ?

    I Actually, I have wiped My Blackberry torch 9800 out although I Have Not done any Back up . So, Is there any possibility to recover My files Including Photos, Videos, Contacts ,..Etc? Because I Really need those Files for Student examination Purposes ?! If you could deliver If anything can be done so,,, your responses are appreciated,,,, Waiting for your response,,,,,

    No backup at all?  Were you not even running protect?  How about sync'ing with a computer or with the cloud?
    If you really don't have any form of backup and did not sync with Outlook, Google, or something, nor sync music and pictures with a computer, then whatever you had on device memory is gone.  If you were using a media card then you may have that, unless it got wiped in the process.
    - Ira

Maybe you are looking for

  • Background scheduling the sessions

    hi, i want to schedule the session in background without going to sm35.  i want to schedule it using rsbdcsub please give some idea or some code

  • Menus with background audio

    hi, i have project in DVD Studio 4 Pro. I create Main menu with looping background music and two Submenus. how to create background music on Main menu, so when i go to Submenus, background music from Main menu will nonbreaking and continuesly play to

  • IPhoto image information

    How do I get iPhoto to record and display the date and the time an image was taken and not just the time it was imported?

  • Export all the lists/libraries from moss 2007 then import to sharepoint 2010

    Hi All I am looking to get a script which export's all the list/libraries in moss2007 then import into sharepoint 2010.  Please help me out. I have qus here, it will take care about the user security ? Thanks  in advance. Subhash

  • Error with MNU_eDATA_SELECTPACKAGE

    Hi, we are tyring to embeed Datamanger to a excel button using macro with MNU_eDATA_SELECTPACKAGE function. we created this button and assigned to it a VBA Macro with the following code in excel  workbook: Application.Run "MNU_eDATA_SELECTPACKAGE", "