How to Restore cube's content after compounding on its IObject

Dear all,
I have 1 BW connected to 2 Source-systems who share the same master-datas. However, discrepancy in the master data started to arise recently between the R3 systems; therefore I decided to activate the compounding option for the concerned master-datas. The best solution for me is to tick the option "Master data locally for source Sys." which appears in the Compounding tab in RSD1.
Here is my concern
1. Does ticking this option leads to a change in the Cube structure? I guess not for ticking this option. but yes If I compound with another Iobject. My understanding is that Source system ID is stored with all requests in Infocubes. Therefore, I need just to delete the master-data and reload it back. Am I wrong?
2. If I'm wrong, then affected cubes have to be kind of Re-set. So, before adding a compounding option to one of cube's Infobject, I guess we need to follow this procedure
    a. Back-up cube content
    b. Delete Master-data and Cube content
    c. Apply compounding option to master-data
    d. Upload the master data.
    e. Upload the cube again.
If we won't loose old content of the cube, is there any way to restore it? How should we proceed? Note that the content of the cube is already full of data coming from 2 different source systems.
Thank you for any information.
Regards,
Laroussi

Hi Laroussi,
if the 0logsys (your compounding object for the master data) is not in any dimensions of your cube, you need to add it.
hope it helps.

Similar Messages

How to restore views and procedures after drop user command?

How to restore views and procedures after drop user command?
We have 817 EE on NT and one developer created a lot of procedures, functions and vews. DB was not backuped and archived and export has not been done - our fault and we understand it. Sorry for this.
Ok, now the story: another developer dropped this db user and we lost everything: procedures, functions and vews. The new user with trhe same name was created and new schema was imported in this user, but all old objects are lost. We don't have export and backup and archive log files.
Question: may we can restore this lost stuff from some other sources. We are looking for lost codes, not data. May be we can use redo logs or shared pool or any other things. Any idea will be appreciated.
Thanks.
Victor
[email protected]

The switch has occurred after user was dropped, the data has been overwritten and there is be no way to use redo log files.
I would like to explore another opportunity. Is possible to use Shared Pool or any Data Dictionary internal information to restore texts of the lost SQL and PL/SQL scripts executed in this DB before user was dropped? Not too many scripts are executed in this DB and the lost ones may still be in stack. I remember that Shared Pool (cash) should keep last executed scripts in order to improve performance. They probably are kept in some special format. Can we restore these scripts? Of course they also might be pushed out by Import that had been done after user was dropped.
Thanks for your help,
Victor

HT1495 how to restore iphon-without backup, after it synchronization from ipod

how to restore iphon-without backup, after it synchronization from ipod

Thanks Eric,
After inserting the original DVD I installed OSX and after reboot I had a working computer.
There was no opportunity to restore the TM backup. however when I rebooted from the
DVD again I saw that possibility from a menu of the install utility.
I ran through the restore over night (8 hours) and when I woke up, I had my computer back!
Thanks for helping me out.
Cheers, Rob

How to restore my iPhone data after mixed with my husband iTunes

how to restore my iPhone data after mixed with my husband iTunes

You might what to say what data you have mixed and where.

How to restore old prefs, etc after clean reinstall of 10.3.9?

Due to a fiasco with Drive Genius I was forced to reformat and reinstall 10.3.9. Luckly, I was bright enough to manually copy over the entire contents of the drive to a firewire drive before I started the drive genius project.
I was able to find directions on how to restore my users which worked perfectly.
I've copied all the apps back. But all the apps were in the main drive rather than in users, so the prefs, registrations etc are, I assume, stored in the old library.
Is there a way to replace the new library with the original to avoid several days work digging out the original packaging to get the serial numbers for re-entering so I can get back to work right away?

The serial #s, etc were in fact in the original main library. I was able to restore the use of all the programs by manually replacing the missing items in each folder in the library. It took over an hour, but I got it all back and saved me from having to rummage through storage boxes for the original documentation to retrieve and re-enter all the info.

N8: How to restore music store widget after hard r...

Hi
I lost all nokia N8 widgets including Music store after I hard reset my N8.
I have really been searching but have been unable to find a work around for this. I am unable to play any OVI music on my phone as it searched for a license and ends up saying that this is not my registered device.
I really need some help.
Nokia care has failed to solve my problewm so far.
HELP!
MODERATOR'S NOTE: We have edited your post. Please refrain from posting irrelevant characters. Posting with a brief and concise concern would be enough to gather solution.

I have been able to restore everything....except the Ovi Music Widget after a hardreset.
This might help -
http://www.nokian8blog.info/2011/06/how-to-restore-ovi-music-unlimited.html

How to restore using increment backup after full backup restore in RMAN?

Hi All,
We have a files of full backup of database after turning on the Archive log.
And after that, daily incremental backup is taken.
Now, i want to restore the the database into a new machine using both files of full and incremental backups. Can anybody give me script for restore of full backup and after that restore of incremental backup?
Thanks,
Praveen.

Praveen,
>>
In my case, i have 2 sets of backups. One is full backup and other is incremental backup. In order to keep the restored database upto date, i need to restore the full backup and then restore incremental backup. Now, i got any idea how to restore using full backup. My doubt is how to update the restored database with incremental backup also?
>>
Restore always looks for level 0 backup, not the incremental backups.
Incremental backups comes in picture during recovery.
During Recovery, Oracle looks for incremental backups, if exists, it will do the recovery with the incremental backups, if no incremental backups available, then, it will look for archived logs.
Therefore, incremental backups never used during restore, they are used only during the recovery.
Jaffar

How to restore Iphone 4 content but for a different carrier?

Hello,
I just recently unlocked my iphone 4 and backed it up before doing the factory reset. When I inserted the new sim card for a different carrier I wasn't able to restore my old content (music, photos, contacts, etc). Is there any way to restore all my old data without going back to my old carrier? Or a way for my phone to recognize my new service with my old content.
Thanks

If you select the Download Only, which is what I do all of the time, even with a broadband connection, once it is finished downloading, you go back to the Check for Update button in iTunes and it will detect the file there and then begin uncompressing the file and installing it. After the upgrade you will not need to restore the firmware, just restore your backup.

How to restore playlists and ratings after hard drive format

Several people have reported problems restoring paylists and ratings after reformating a hard drive. Here is what worked for me and what did not.
I had to reformat my hard drive. Before doing that I exported my playlists from itunes to another hard drive as an xml file. I also copied the folder with all my songs to another drive. (Also of course had it backed up on DVDs.)Then I copied the itunes library files (see url http://docs.info.apple.com/article.html?artnum=93732) to anoher drive.
After reformating my hard drive and installing the lastest verion of ITunes, I copied the actual songs back into a subfolder in my music folder. I then told iTunes to import the subfolder with the actual music. That resulted in a restored library that lacked playlists and ratings.
Don't do this
I purchased Anapod ($30.00) because its web page said (http://www.redchairsoftware.com/anapod/):
"Anapod CopyGear is an easy-to-use, compact utility for copying music tracks, playlists, podcasts, photos, and videos from your iPod back to your PC."
Well, I did transfer 104 playlists back to my iTunes library through the Anapod backup function. However, the transfer also put more than 20 gigs of duplicate songs into the library. All of the songs listed in the playlists were duplicated in iTunes. I could find no way in Anapod to simply copy the ratings and the playlists. Anapod documentation was outdated. For example the online help pages said that playlists could not be backed up. This was confusing because I had just done that.
"In a future release we will be adding the ability to backup your iPod playlists. This will allow you to generate backup files of your iPod playlists on the computer. These files will not be usable on your computer though. They can only be used to restore playlists at a later time on your iPod (assuming it still carries all the audio files referred to in that playlist)." This text is from url http://www.redchairsoftware.com/anapod/support/tome/tx2pc.php#5.1.2
I sent requests to Anapod for help today, but they have not been answered yet. Docs truly did not seem to help. Would have been good if there was a pdf file rather than just an online help html file that seemed outdated.
This worked for me:
I ended up having iTunes wipe out the entire library because of all the dups Anapod made. (Made sure that iTunes only wiped out library and did not delete actual songs from hard drive. Then I had iTunes import my subfolder with songs again. That brought me back to where I was before wasting money and much time on Anapod.
After I had my iTunes library up (without ratings and playlists and after finding Anapod did not meet my needs.
1. I imported the xml file to which I had exported playlists before reformating hard drive. That gave me the playlists back although an error message said some items not copied because the music tracks listed in playlists were not in my iTunes library. --Possibly I deleted songs after playlists were downloaded some time ago to iPod. Importing the xml file is probably not necessary because of what I did below.
2. Quit iTunes
3. Because my song ratings were still missing, I then moved the iTunes library files made by the new version of iTunes into a different folder.
4. Then I put my old version 4 library files into the place where the library files should be.
5. Then I crossed my fingers and restarted iTunes. It took awhile to start and said it was updating my library files. Now I have back most or all of my playlists and ratings.
If problems develop, I will probably wipe out iTunes library and use Anapod to move everything from my iPod into a folder and tell iTunes to import that folder. That approach might avoid the dups that Anapod makes when restoring playlists to iTunes.
So my message is keep your actual songs backed up somewhere (such as DVD's and anotehr hard drive) and keep a duplicate copy of your library files somewhere not on your hard drive. With these items you should be able to restore iTunes library to its former status.
Sorry for the length of this message. Hope it helps someone.

The simple version of above:
iTunes Files to Backup (anytime you make additions or changes to the Music or Library that you want to retain)
1) All music files in their current folder structure (usually located in and under the ‘iTunes Music’ folder)
2) The Library database file: ‘iTunes Library.itl’ located in the ‘iTunes’ folder
3) The Library XML file: ‘iTunes Music Library.xml’ located in the ‘iTunes’ folder
4) Any XML playlist files created for Playlist retention
5) The two iTunes.pref files (optional)
-- C:\Documents and Settings\<your username>\Application Data\Apple Computer\iTunes\iTunes.pref
-- C:\Documents and Settings\<your username>\Local Settings\Application Data\Apple Computer Inc\iTunes.pref
6) The XML file of Ratings, Play Counts and Last Played attributes saved from the main Library and created by Otto’s SaveRatings script (also optional, but recommended):
“Download this: http://ottodestruct.com/itunes/SaveRatings.zip . It's a program, just run it like any other program. Run it on the machine where you're copying the info from BEFORE you move the files to the new machine. Click the "Save Ratings" button and it'll create a ratings.xml file. Now when you move the files, move the program and this file as well. Then after you make your new iTunes library, run it again and click the "Restore Ratings" button. Voila, all your information is back in the Library. Well, most of it anyway, it's not perfect. It'll tell you what songs it couldn't figure out though, and there's usually not very many.”

How to get the file content after uploading file

Hello everyone!
I have a question. Anyone can provide an example code by jsp that getting the uploaded file content after user uploading a file?
Your help is highly appreciated!!!

My experience is you need to do it twice: first read it to a StringBuffer and readline. Then write the file to server. See the code below
MultipartParser parser = new MultipartParser(request, 10000000);
Part part = null;
FilePart filePart = null;
File uploadDir = new File("/Uploads/");
if (!uploadDir.exists()) {
uploadDir.mkdir();
while(true){
     part = parser.readNextPart();
     if(part == null)
          break;
     if(part instanceof FilePart){
          filePart = (FilePart)part;
          filename = filePart.getFilePath();
          //You can do one of the following option. Here is read line to a buffer and display to screen
//if (filename != null) {
          //Do not store the file to server machine.
//long size = filePart.writeTo(uploadDir);
// System.out.println("The number of bytes written is "+size);
          reader = new BufferedReader(new InputStreamReader(filePart.getInputStream()));
          String newline=reader.readLine();
          if(newline!=null)     {
          reconcileContent.append("<table border=\"1\"><tr><th>Destination ID</th><th>File ID</th><th>Rept Date</th><th>As of Date</th><th

How do I restrore iTunes content after hard drive crash?

My hard drive crashed and had to be replaced. How do I restore my content without having to pay again? I did burn
a lot of it to CD but I hadn't gotten around to doing with most recent purchases. Thanks.

Take a look at Option 3 here:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Quickly_reconnecting_large

How to Restore E-Business Suite after Server Crash?

Hi Hussein Sawwan,
I have a question that will be useful to other members of the community. How do I restore Oracle E-Business Suite R12 after physically loosing the server that hosts the ERP instance?
I have 2 scenarios here:
1-Existing cold backups of the DbTier and AppsTier are available
I have been doing a full backup of the Apps and Inst folders once a week on an external drive.
I have been copying the DB folder (Data + DBMS_ORACLE_HOME) after shutting down the database cleanly once a week on an external drive. Noting that, here the database is in NOARCHIVELOG mode.
2-Existing Hot backups of the Database are available and I have a backup of the Apps and Inst folders (AppsTier)
The database is in archivelog here. I have been doing a full hot backup of the database once a week, an Incremental backup everyday, and a full backup of the archivelogs once a week. All of this to an external drive. The Apps and Inst folders are backed up once a week to an external drive.
Let say something bad happens and we completely loose the physical server. How can I do to restore and recover my Oracle E-Business Suite R12 to a new server?
I know I will have to Install the same OS on the new server, but what happens after that?
Thanks in advance,
Clamarion.

I believe the easiest approach would be:
- Install the same OS on the new servers
- Install OS pre-req software and packages for your EBS instance
- Restore from cold backup (if the crash happened directly after this backup and you haven't lost any data)
OR,
- Restore from hot backup (if the crash happened after your cold backup and you have data that wasn't part of the cold backup)
I assume that no changes to the hostname, domainname, IP Address, port numbers, directory structure, ..etc is taking place in this restore.
Thanks,
Hussein

How to restore or re-install after disc problems?

My Macbook Pro stopped starting up some days after installation of OS X Lion. It just opened yjhe gray screen with Apple logo and kept rotating the wheel and showing the progress bar.
After lots of efforts with secure startup etc, I booted from the installation disc, ran the inspect disc and tried to repair reported disc errors.The disc could not be repaired and I tried to restore from my Time Capsule.
I can see that Airport finds possible wifi spots (under system info / network), including my own, but I can not connect from any system tools.
Q1: how is that supposed to be done?
So I can not restore from Time Capsule.
I made a disc image to a newly reformated usb hard disc.
Now I am trying to install OS X (Snow Leopard) from my installation disc. After two trials, stopping after long time, saying (my re-translation from Swedish):
Installation failed
Mac OS X couyld not be installed on your computer
The installer could not copy necessary help files
Click 'Restart' ...
Q2: What is wrong? What can I do?

It's the key next to the "Apple" key on your left bottom row. The key will say "alt" at the top & 'option' at the bottom.

How to restore OS X Maverick after having OS X Yosemite installed by upgrade on a new MacBookPro

1)
After my free upgrade to OS X Yosemite on my new MacBook with preinstalled OS X Maverick,
2)
the MacBook starts with the new Yosemite-Screen and I can login to my MacBook-Account succesfully
3)
But then, when logged in successfully, the Yosemite load_display_line only loads to a 1/3 and there the Yosemite get stuck.
4)
As offered on my MacBook screen, I had my MacBook checked by Apple and received the code for: "no problems, my MacBook is alright" (ADP000).
My question:
I want to restore the preinstalled OS X Maverick on my new MacBook. - How can I do that in my special case?

Bad RAM, or slightly incompatible RAM, ie. PC-100 instead of PC-133, maybe only on one of the sticks.
If you can still boot into OS9, do so and open the Apple System Profiler and report on the RAM. Is it all the same speed, are the sizes what you expect ? when I've had RAM go bad, a bad stick would show up as half-capacity, ie. 256MB instead of the 512MB I know it was, next time the slot wouls show up as empty.
Are there any PCI cards inserted ? like a USB v2 card or similar.

How to restore Mail and iphoto after a complete OS reinstall

Hi
I have searched as best I can to see if anyone has asked the same question, but no luck.
I want to do a complete reinstall of Leopard. I have an external HD and have activated TM so as far as I know I have a full back up.
Once I reloaded the OS can i bring back my Mail set up as it is. By this I mean, is there a way to restore all my folders, emails and settings?
Also with iphoto, can i bring it all back in as it is now?
I fully understand how to get a file back using TM, it seems pretty easy, but applications seem a little more difficult.
Please can someone give me some advice on this.
Many many thanks
Stewart

So you intend to erase (or replace) your boot disk and install Leopard on it, right? After the installation finishes, you'll be asked to create your account etc etc etc. The very last step is you are asked if you'd like to use the Migration Assistant to restore from another Mac or TimeMachine. If you say yes the Migration Assistant starts up and you can choose your TimeMachine drive.
Here I'm fuzzy because I've not performed this step. I think you'll get the same options as you do if you migrate from another Mac - the choice of Applications, Files/Folder, or Library. If I'm correct, you choose what you want to migrate, start it, and walk away until it finishes.
Now I know this works because I did before I knew I could use the Migration Assistant with TimeMachine. After you get to the desktop you select TimeMachine and select the drive that has the backup. TimeMachine starts up and you can browse the folders and times until you find a folder/file you want to transfer. Select it, click on the Restore button down at the bottom right hand corner of the screen, and let it work.

How to Restore cube's content after compounding on its IObject

Similar Messages

Maybe you are looking for