How to restore data of time series objects

Dear All,
I was checking functionality of report for Anchors
/SAPAPO/DM_LC_ANCHORS_DELMANDT
This deactivated all the planning areas by deleting time series objects. Hence the data lose.
Could i get back the data?
Regards,
Vijay

You can if you have a backup copy of time-series in an Infocube, then use the transaction /sapapo/tscube to copy back from the infocube into your planning area.
Otherwise I am afraid you are stuck somewhat.
Having looked at the coding, it seems that this report deletes ALL planning versions for the current client hence the reason why it deleted time series objects. You will need to Create another Planning version (via transaction /sapapo/mvm) then "Create Time Series Objects" for your Planning Area against this new planning version (via transaction /sapapo/msdp_admin). As I said, however, any time series objects will have been lost if you have no backup, this will only reinitialise the planning area.

Similar Messages

  • How to restore data from time capsul

    How can you restore your data from Apple Time Capsule?
    Would it be an idea to share your back up with others? And can it be done?

    Read Q14-17 here.
    Q18 covers copying backups to other locations.
    http://pondini.org/TM/FAQ.html
    If you want a secondary backup use another tool. A direct disk image from superduper is free to do.. and works much better to do a restore of the computer.

  • How to restore data from my Time Capsule onto my new hard drive

    My Macbook's hard drive had to be changed, and I'm trying to restore files from my Time Capsule onto my new hard drive, but all I see are three sparsebundle files (one for each Mac we have at home, including my computer/old hard drive). From that point I don't know what else to do. If I click on it, it opens a dialogue that says "opening volumes" and it stays on that for a while.
    Does anyone know how to restore data backed up in my Time Machine from previous backups onto a new hard drive? Does it have to do with these sparsebundle files? Or, is there another way?

    Hello Alexevich. Welcome to the Apple Discussions!
    Does anyone know how to restore data backed up in my Time Machine from previous backups onto a new hard drive?
    Check out the following Apple article: Restoring files from a Time Capsule backup

  • How to restore files from Time Machine after Clean Install of Mavericks

    How to restore files from Time Machine after Clean Install of Mavericks. I know the data is there but seems unaccessable because I may have changed the Computer or Owner name. Is there any way to fix that now?

    Hi Linc,
    my back-up data is managed by Time Machine; the actual data is on a second internal Hard Drive with a capacity of 1TB - not partitioned. I am using Time Machine and have access to all data backed up since Mavericks Clean Install but not the data prior to this date.
    When I open the 1TB drive in Finder I can see a folder "Backups.backupdb/Sigi's Mac Pro/ followed by many folders of backup dates going back to 2010-09-20-103441 and up to 2014-02-07-142414 all followed with folder Macintosh HD.  February 7th  2014 was the date of the clean install.
    These Backups are followed by backup date folder 2014-02-08-075554 with a subfolder of MacPro-320GB (this is the name I assigned to my Boot Drive during formatting; I suspect I should have assigned the same name as before ie. Macintosh HD) and 2014-02-11 with a subfolder Macintosh HD, these are the ones I get access to by way of Time Machine > Restore.
    Weird thing is on Febr 11 when I relised my possible mistake and renamed the Bootdrive back to what it was initially ie. Macintosh HD despite this I have access to all backup data since the Clean Install in both folders MacPro-320GB as well as Macintosh HD but not to any data prior to the Clean Install.
    Is there something that Time Machine knows and prevents access or is it simply a matter of renaming the subfolder 2014-02-08-07554/MacPro-320GB to ........./Macintosh HD?
    I like to restore selectively and not everything - It was hard work reinstalling apps that were supposed to be the troublemakers (ref my discussion on Maverick problems) but I now need to get onto data specific to some of these apps as well as other data I may have missed. Long story? Yes and sorry.
    Sigi

  • Problem in creating time series objects for a planning area

    Hi Friends,
    I am working on SCM 4.0 APO. I am trying to create the time  series objects for a  'Z'planning area which i have created. This Planning area is linked to a planning object structure which contains only three characteristics 9amatnr,9alocno & zplnpart. But the creation of time series objects is taking a long time. the screen just remains the same.
    Can anybody encountered such a problem any time?
    request you all to put some light as what could be wrong or causing the delay in creating them???
    All helpfull answers will be suitably rewarded.
    Thanks
    mvd

    Hi mv d,
    I have a couple of questions:
    1) how many Key Figures does your planning area have?
    2) what is the length of your time series horizon?
    3) how many characteristic combinations are currently in the Planning Object Structure? and how many newly character
    I am asking because these aspects might affect the running time of the time series creation. Have you also tried creating the time series in the background? How long did it take there?

  • Time Series Objects for a Planning Area

    Hi all,
    Can anyone let me know why do we create Time Series Objects for a Planning Area.
    What is its Role & significance..
    Regards,.
    Vishal.S.Pandya

    time series is usually a Demand planning concept(and used in SNP as well but in SNP its predominantly the order series that plays a main role)
    time series is a general concept in statistics(and forecasting) wherein the value of a key figure is represented in a time bucket
    Time series gives you an idea of the gradual change in the values by time and the relation of the future based on the past
    planning area in APO (and other tools) tries to represent this as a 2 dimensional model with time on the columns and key figures in the rows. the value that you load into the cells that are formed by the above are based on the characterisitic values you choose from your MPOS which is linked to the way the values are stored in the planning  area
    The planning area stores data for each key figure in the smallest unit of time(technical storage buckets) and the lowest level of characterisitc value combination

  • How to set date and time on apple tv

    how to set date and time on apple tv

    Assuming this is not the first time you have used your Apple TV
        1.    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
        2.    Also try restarting the router.
        3.    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • HT201250 (1) Where is the "Time Machine menu" and the choice to "Enter Time Machine" (mentioned in the "Restoring data from Time Machine backups" section)?

    1) Where do I find the "Time Machine menu" and the choice to "Enter Time Machine" (as mentioned in the "Restoring data from Time Machine backups" section in the Mac Support article "Mac Basics: Time Machine")?
    2) How would I restore e.g. a particular photo from a backup I made with Time Machine? I can see how this is done with Word documents, but can't see how to do it with photos?

    Welcome to Apple Support Communities
    1. The Time Machine icon is on the menu bar.
    2. If you want to do that with individual photos, it's the same way as for documents. If you want to do it with iPhoto, you have to restore the whole iPhoto library, not only one photo

  • HT1766 how to restore data file from back up on iPhone 5 docs to go

    how to restore data file from back up on iPhone 5 docs to go

    If it backed up the lock file, then Lightroom was open when Time Machine ran, and the backup therefore may be corrupted.  You could try restoring that backup (without overwriting your week ago version) and see if it'll open.  If it does, you're off and running.  What methods have you tried?

  • How to restore Data from past iCloud backup? I lost my spreadsheets from Numbers, need help.

    How to restore Data from past iCloud backup?
    Is there a way where i can retrieve my spreadsheets from the past iCloud backup of numbers?

    Your Numbers documents were synced with iCloud so they would be stored on the server rather than being included in the backup.  If you were signed into your iCloud account on a Mac that you were backing up with Time Machine, you could restore them from your Time Machine backup.

  • Time series objects and order objects on what condtion we need to use

    Dear Experts ,
    I have question regarding Time series objects and order objects
    from my understanding
    TIme series objects the data is stored in time buckets without
    reference to orders.
    Order objects the data is stored as orders. Key figure data is
    then saved as orders if semantic 000 is entered in the detail view of the key
    figures in the planning area.
    my question is when to use the option 1 and when should not use
    same for option 2
    Many thanks
    Regards
    Raj

    Hi,
    This depends on the requirement you have also the application you are using.Like DP key figures are generally time series since in DP you do not need order numbers for example for history sales the requirement is the quantity period wise but not the order numbers.
    Again in SNP the distribution and planned quantities are required order wisecoz you need the order numbers you execute the same in ECC system or for Pegging purposes.
    Now the safety stock requirement can not be at order series since this is with relevent to some periods.
    So overall i can say this depends on the requirement of the kay figure.
    Hope this can help.
    regards,
    kaushik

  • How to get Date Format from Local Object.

    Hi All,
    I am new to Web Channel.
    I need to know Date format From date of locale.
    suppose there is a date "01/25/2010" date in date field I want to get string "mm/dd/yyyy". Actually I have to pass date format to backend when I call RFC. 
    Is there any way to get Date format from "Locale" object. I should get date format for local object
    I get local object from "UserSessionData" object but how to get Date format from it.
    I am not looking for Date value. I am looking for current local date format ("mm/dd/yyyy or dd/mm/yyyy or mon/dd/yyyy) whatever local date format.  I could not find example which show how to get date format from "Locale" object.
    Any help will be appreciated with rewards.
    Regards.
    Web Channel

    Hi,
    You can get it from "User" or "Shop" business object.
    Try to get User or Shop Business Object as shown below.
    BusinessObjectManager bom = (BusinessObjectManager) userSessionData.getBOM(BusinessObjectManager.ISACORE_BOM);
    User user = bom.getUser();
    char decimalNotation = user.getDecimalPointFormat().getGroupingSeparator();
    If you are seeing "1,234.00" then above code will return "."
    I hope this information help you to resolve your issue.
    eCommerce Developer.

  • HT201250 Circle and cross through iTunes icon afte the seagate hard drive replaced and restored data from time machine backup.

    Circle and cross through iTunes icon: had the seagate hard drive replaced and restored data from time machine backup. Why does the iTunes icon have a circle and cross through it? As though incomplete? tried everything and still Circle and cross through iTunes icon.

    No it isn't something you'd find on the computer, it has to be custom installed from the 10.6 installer disc or Software Update if it wasn't before.  It allows you to use older PowerPC applications on your Mac.   On the other hand double check the version of iTunes you have does not require 10.7 minimum either.

  • How do you date and time stamp iCal entries?  We share an event calendar and need to know when a new event was entered into iCal.

    How do you date and time stamp iCal entries?  We share an event calendar and need to know when a new event was entered into iCal.

    BKBK,
    Thank you for your response. That does adequately cover the
    client-originated sessions, but still leaves the ability I am
    looking for unavailable.
    It did serve to definitively answer my most pressing
    question, however, with this statement:
    Note: ColdFusion cannot create a session if an initiator
    application uses a SendGatewayMessage method to start an
    interaction with a client, such as an SMS user. In this case, the
    sending code must keep track (for example, in a database) of the
    messages it sends and their destinations. When a response event
    arrives, it can look up the origniatorID to determine whether it
    was in response to an outgoing message.
    I will play around with the Application scope to see if there
    might be a workable solution there.
    RLS

  • How to compare date and time together

    Hi,
    How to compare Date and Time together?
    For example in a database table there are two fields rundate and runtime.  I want to compare these two with perticular date and time in the program.  Like, I want to pull all the records where the records's date and time are less than a perticular date and time in the program.
    Hope the question is clear...
    Thanks.
    Kavita

    Hi Kavita
    There is no as such Date and Time Comparision FM in Standard SAP  But You can define your own like this
    <b>FUNCTION ZAV4_COMPAREDATETIME.
    ""Lokale Schnittstelle:
    *"  IMPORTING
    *"     REFERENCE(DATE1) TYPE  DATS
    *"     REFERENCE(TIME1) TYPE  TIMS
    *"     REFERENCE(DATE2) TYPE  DATS
    *"     REFERENCE(TIME2) TYPE  TIMS
    *"  EXPORTING
    *"     VALUE(TWOISMORETOPICAL) TYPE  C
      twoismoretopical = ''.
      if date2 > date1.
        twoismoretopical = 'X'.
      else.
         if date2 = date1 and time2 > time1.
           twoismoretopical = 'X'.
         endif.
      endif.
    ENDFUNCTION.</b>
    Regards
    Mithlesh

Maybe you are looking for