How to restore images in iMessages iOS 6 .

SSince switching to my 6+ I have noticed that all of my historic images and videos are replaced with placeholders that say img_671.jpeg (as an example). How can I recover these. I never worried about saving them to my camera roll since I knew I could go back and review them.

In Golive for instance, images deformed or not at 100% show an icon in the low right corner and you can restore them on a click of a button. Is it possible to do this in InDesign?
>homotheticly: What?
Homothetic transformation: (from Wikipedia.org)
In Euclidean geometry, when not a translation, there is a unique number c by which distances in the dilatation are multiplied. It is called the ratio of magnification or dilation factor or similitude ratio. Such a transformation can be called an enlargement. More generally c can be negative; in that case it not only multiplies all distances by | c | , but also inverts all points with respect to the fixed point.
More simply said, it's the transformation obtained when the length x heith ratio is locked, or when holding "shift" while dragging the corner of the image.
>You want to restore them to 100%?
100% does not restore the initial ratio as far I as could see. If the image has been made square from a rectangle, it will remain square...
>What about the frame? Is that also stretched?
The deformation often comes from using a command such as "fill up the frame", unproportionally. Then if at some stage, one changes his mind and wants to restore the initial proportion, for ex. 1-1.5 for a 24x36mm photo...
>Which version of InDesign are you using?
4.0.5
Thanks! ....

Similar Messages

  • HT3960 how to restore my iphone in ios in 4.1, because i update it in 4.2, now it stuck..

    how to restore my iphone in ios in 4.1, because i update it in 4.2, now it stuck..

    See Here...
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • How to restore iphone 4s to ios 7 from ios 8.1

    How to restore iphone 4s to ios 7 from ios 8.

    You can't.  this has been asked and answered hundreds of times on these forums before.  Search before posting.

  • How to restore my iPhone 3G, ios 3.1.3, from backup without updating.

    How do I restore my iPhone 3G, ios 3.1.3, from a backup without updating.  I need to restore my ical entries and they are wiped out on both my main and backup drive and mobile me.  My phone is also wiped out and I think my back up may be my only hope of getting that info back.  Every time I try to restore using itunes 5.1 itunes only shows me th option to restore and update.  Not just restore.  Will the option to just restore from the last backup present itself in the process or do I need to shift click or something?  Thanks for your help...

    Can't I fake it out so it just leaves my ios as it is but restores files and settings?  ios 4 doesn't really work well with the 3G models.  They get slow and buggy.  Isn't there some way to just put the ipsw file somewhere and point to it?  Or, is there a way to just rip the ical info outof the backup files.  That would work to.

  • How to restore purchased ringtones after IOS 8 update

    I have iPhone 5c.    After I did the IOS 8 update and then the ios 8.0.2 update, I no longer have my purchased iTunes ringtones (I only have three that I purchased).    It shows I purchased them in my iTunes store and my music icons on my phone.   But when I go to settings and sounds and tones, they are not there.   Trying to figure out HOW to restore them to my iPhone. 
    Help?    I am an idiot, so I would appreciate step by step directions.   Thanks!

    Hi suebeehoney0508,
    If you are having issues syncing your ringtones back to your iPhone after a recent update, you may find the following User Tip helpful:
    How to sync ringtones to your iPhone | Apple Support Communities
    Regards,
    - Brenden

  • How to restore iCloud backups earlier ios version to new phone with latest ios?

    Does anybody know how to restore an icloud backup with i.os 7.1.2 version to a new iphone5 with ios 7.0.4 version?
    thanks

    Set up the phone as a new phone, not from the backup. Go to Settings > General > Software Update, and perform the update. Then go to Settings > General > Reset > Erase All Content and Settings to repeat the setup, and this time choose Restore from backup.

  • How to restore iphone without installing ios 8

    hi,
    my sister wasnt using her iphone for a month (i dont know why), yesterday she charged it and guess what? it has been locked for 44 years (it says try after 23.480.302 minutes later), i tried to restore the iphone but it will install ios 8, i dont want to install it because iphone 4s has 8gb storage and available space is 5.98gb but ios 8 needs 5.5 gb to be installed that is why i dont want to install ios 8.
    how can i restore iphone 4s to ios 7.1.2 ?
    help me please.
    thanks in advance.

    I'm actually having the exact same problem. I switched from 4s to 6, and I bought all new ringtones. Then the update happened, and I had to use the link to restore my ringtones. Now, I lost my favorite ringtone for some reason, and I can't restore it. It's in my library, but not on my phone. And I have to buy it again, apparently.I just don't want to buy it again, only to lose it again, you know?

  • How to restore image after Set Text of Container behavior

    Hi there, I'm not sure how to apply the Set Text of Container behavior. Basically, when I mouse over an image, I want a larger version of the image with decription text to appear.  I also want to restore the original image without text on mouse out.
    I want the larger image and its text to appear in the exact location of the original image not anywhere else on the page. Here's an example what I've done to try and achieve the effect:-
    1. Create a div and insert image in it.
    2. Select the image and Set Text of Container behavior. Under the Set Text of Container dialog box, select the div that the image is in (e.g. div "apdiv1") and type in the New HTML - For example: <img src="largerimage.jpg"><span id="apdiv1">image description</span>
    3. Set the event to mouseover
    I do not know how to proceed to restore the original image without text when I mouse out. I know I’m doing something wrong to achieve this effect but I can’t figure out what it is. Your help is greatly appreciated!

    Use CSS Disjointed Rollovers.
    http://alt-web.com/DEMOS/CSS-Disjointed-Image-Rollover.shtml
    http://alt-web.com/DEMOS/CSS-Disjointed-Rollover-1.shtml
    http://alt-web.com/DEMOS/CSS-Disjointed-Rollover-2.shtml
    http://alt-web.com/DEMOS/CSS-Disjointed-Rollover-3.shtml
    Nancy O.
    THANK YOU NANCY It worked perfectly!
    THANKS GRAMPS!

  • How to restore SMS and iMessage from itunes backup?

    Hi, I made a backup with itunes, and made a clean install of iOS 7.1.1. When I was going to recover all my data, iTunes told me that the backup was corrupt (and I only had that backup) Using iBackUp Bot and the information linked to iCloud, I was able to recover everything from that corrupted backup, except for my sms. But in the storage section of Configuration, I can see like 1gb of data in sms, although the Messages app is empty.
    Any ideas or help about how import my sms back to the iphone?
    Thanks!

    Same issue, previous device backed up to iCloud, then setting up new device, did the restore from icloud backup that I made last week, but camera roll is empty.
    iCloud help says Camera roll is backed up. Checked iCloud backup, Camera roll is there.
    Forums suggest restore from itunes, tried ... but again empty camera roll.
    Clear all settings and data, as suggested in forums, bearing in mind its a new device, restore from back up, not USB but Wifi only, still empty camera roll.
    Wiped it, tried restore again, still no Camera roll. Lot sof shared photostreams, but not my photos.
    Download icloud PC app, only options for photos is Photostreams, no camera roll.
    No way of accessing camera roll through itunes, or icloud app, or icloud.com
    Is there really any point in iCloud backing up camera roll if it cant restore ?
    Any suggestions, would be appreciated.

  • How to restore images in their homothetic proportions?

    Probably simple but impossible for me to find out: How can I reset homotheticly the proportions of images that have been stretched or compressed in the layout?

    In Golive for instance, images deformed or not at 100% show an icon in the low right corner and you can restore them on a click of a button. Is it possible to do this in InDesign?
    >homotheticly: What?
    Homothetic transformation: (from Wikipedia.org)
    In Euclidean geometry, when not a translation, there is a unique number c by which distances in the dilatation are multiplied. It is called the ratio of magnification or dilation factor or similitude ratio. Such a transformation can be called an enlargement. More generally c can be negative; in that case it not only multiplies all distances by | c | , but also inverts all points with respect to the fixed point.
    More simply said, it's the transformation obtained when the length x heith ratio is locked, or when holding "shift" while dragging the corner of the image.
    >You want to restore them to 100%?
    100% does not restore the initial ratio as far I as could see. If the image has been made square from a rectangle, it will remain square...
    >What about the frame? Is that also stretched?
    The deformation often comes from using a command such as "fill up the frame", unproportionally. Then if at some stage, one changes his mind and wants to restore the initial proportion, for ex. 1-1.5 for a 24x36mm photo...
    >Which version of InDesign are you using?
    4.0.5
    Thanks! ....

  • How to restore image after cropping

    void cropLayer(PIActionDescriptor descPosition, int32 layerIndex, PIActionDescriptor  currLayer)
            // get "currLayer" layer bounds
           error = sPSActionDescriptor->GetFloat(descPosition, keyTop, &top);
           error = sPSActionDescriptor->GetFloat(descPosition, keyLeft, &left);
           error = sPSActionDescriptor->GetFloat(descPosition, keyBottom, &bottom);
           error = sPSActionDescriptor->GetFloat(descPosition, keyRight, &right);
          // Select area to crop "currLayer"
          error = sPSActionDescriptor->PutUnitFloat(desc0006D190, keyTop, unitPixels, top);
          error = sPSActionDescriptor->PutUnitFloat(desc0006D190, keyLeft, unitPixels, left);
          error = sPSActionDescriptor->PutUnitFloat(desc0006D190, keyBottom, unitPixels, bottom);
          error = sPSActionDescriptor->PutUnitFloat(desc0006D190, keyRight, unitPixels, right);
          error = sPSActionDescriptor->PutObject(desc0006D188, keyTo, classRectangle, desc0006D190);
          error = sPSActionControl->Play(&result, eventSet, desc0006D188, plugInDialogSilent);
         // crop "currLayey"
         error = sPSActionDescriptor->Make(&desc0006D388);
         error = sPSActionDescriptor->PutBoolean(desc0006D388, 'Dlt ', true);
         error = sPSActionControl->Play(&result1, eventCrop, desc0006D388, plugInDialogSilent);
         // export "currLayer" as PNG
        // restore "currLayer" as original?
    Hello,
    As above code, I am calling "cropLayer()" in a loop.
    After cropping a layer, image size is affecting for other layers and gives me error in layer bounds.
    Because, size is changed for other layer size after a current layer cropping.
    I need to reset/restore layer coordinates before cropping next layer.
    Also I tried with 'eventUndo' but can't generate code by listner. How does it possible ?

    Use CSS Disjointed Rollovers.
    http://alt-web.com/DEMOS/CSS-Disjointed-Image-Rollover.shtml
    http://alt-web.com/DEMOS/CSS-Disjointed-Rollover-1.shtml
    http://alt-web.com/DEMOS/CSS-Disjointed-Rollover-2.shtml
    http://alt-web.com/DEMOS/CSS-Disjointed-Rollover-3.shtml
    Nancy O.
    THANK YOU NANCY It worked perfectly!
    THANKS GRAMPS!

  • How to restore Ipod Touch running ios 5 without passcode or itunes?

    Hello All,
    I updated my Fourth Generation Ipod Touch to ios5. The Itouch's home computer broke down so i am now forced to use my other pc which is authorised with the same apple id as the one on my old pc and on my itouch. I have not used my itouch in a couple of months and i forgot the password. When i try and connect it up to the latest version of iTunes on my PC it gives me this message:
    "Itunes could not connect to "Ipod Touch" because it is locked with a passcode. You must enter your passcode on the iPod before it can be used with iTunes."
    Note: I do not mind force restoring. I have no data on my itouch that needs to be saved I have everything already backed up to the cloud. I tried force restore methods but they would not work. Is there a special method for ios 5?
    PLEASE HELP

    Place the iPod in recovery mode and then restore via iTunes on the computer.  The restore from iCloud backup. See:
    'http://support.apple.com/kb/ht1766

  • How to view images in iMessage

    Messages (iMessages), on my MacBook Pro, does not display all images/pictures I receive.  Most are jpg files that I must click on to display.  I would like images to display when I open a chat message. Please assist.

    Hi,
    Messages should display all Pic files In line in the chat or conversation.
    However it is true to say that at times Messages does not do this and the Speech bubble for the pic file becomes a place holder and it tends to launch Preview to view the pic.
    Although I have seen the problem myself I have not found a definite "Fix".
    I find the issue seems to come and go.
    Try a PRAM/NVRAM Reset.
    Restart the computer holding down the CMD+ALT+P+R keys until you have heard three Start Up Bongs then let go and allow a normal start up.
    8:13 pm      Tuesday; October 7, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • How to restore iPhone 5c to iOS 7.1.2

    My iPhone 5c is pure trouble since downloading iOS 8.0.1 and the fixes in 8.0.2.  Can someone please walk me through a restore to 7.1.2?

    My screen freezes when replying to emails, but the worst is that it is sending my text or e-mail replies to a different recipient. Yesterday it even sent a text reply as an email reply to a different recipient!
    For example, I get a text from A.  Then I get a text from B; I hit the reply button to B's text and type in and send my reply to B. It goes to A. This has happened several times.
    Yesterday, person D sends me an e-mail that I read but does not require a reply.  A few minutes later person E sends a me a text message that does require a reply but guess what? it ends up being sent to D as an e-mail reply.  What in the world is going on here?
    I never had anything like this happen till after the last iOS update.
    I read on line that I could restore iOS 7.1.2.

  • HT4623 how to restore previous version of ios to iphone

    i want to restore ios 6.1.2 from 6.1.3 from my iphone 3gs

    Sorry, there is no supported way to do so.

Maybe you are looking for

  • Latest IOS 7.1 Release - How can I set calendar events to the minute. This was enhanced in ios7 and now has gone back to 5 minute blocks. Why???/

    In IOS6 you could only set calendar appointments at 5 minute intervals. This was fixed in IOS7 but has reverted back in the latest release of IOS7.1. Why? IS there any way to override it. It means I have to go back to my old method of putting my actu

  • Lumia 900 Various Issues

    I recently purchased a white Lumia 900 this past weekend, and just wanted to go over some concerns/issues I've had with it thus far.  I was thinking about doing a return/replace with At&t, but it seems that the issues may vary.  I'm hoping many of th

  • [SOLVED] Pacman -Syu on a (very) limited bandwidth

    Hi I've been using Arch for about a year, and I'm still pretty new to Linux and Arch. The reason I installed Arch in the first place was because of the how much control you have over your system, since you get to build it up according to your prefere

  • STMS config error in 4.0B

    I am trying to conifgure STMS in sap 4.0B system where my DEV is domain controller , i was having DOMAIN.CFG only under \usr\sap\trans\bin So, i copied TPPARAM.NT from kernel to \usr\sap\trans\bin and renamed as TPPARAM which has below entries, trans

  • Forgot email and password. Need help! Newer mind g...

    Hello i need to get back my skype account and i dont know wich of my email is on that account becouse its been few years when i created account. Is it possible by using login nick name get back my account. For proof its my account i can tell ewerythi