How to restore iPad from backup

How can you restore the iPad from a backup?

iPad 2 User Guide (For iOS 4.3 Software)
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

Similar Messages

How to Restore iPad from iPhone Backup?

I have an iPad and an iPhone, now I have a problem, I want to Restore iPad from iPhone, but Idon't know how to do this job, can you give me some advise about how to restore iPad from iPhone backup file?

Restore from iCloud Backup
1. Settings>General>Reset>Erase all content and settings
2. Tap Erase
3. You'll see Apple logo and progress bar
4. Hello
5. Slide to set up
6. Set language
7. Set country
8. Choose Wi-Fi network; enter Wi-Fi password
9. (a) Use Location Service (b) Don't Use Location Service
10. Select option
11. (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
12. Selected Restore from iCloud Backup
13. Enter password for iCloud
14. Agree to Terms and Conditions
15. Setup Apple ID
16. Select backup
17. Restoring from iCloud
18. Hello
19. Restore Completed. Your iPad was restored successfully. There are just a few more steps to follow and then you're done!
20. Continue
21. Finish setting iCloud enter Password
22. Updating iCloud settings
23. Create a Passcode
24. Welcome to iPad
25. Get Started
26. Restoring Apps and Media
27. Enter Apple ID and Password
28. Notice: Restore Incomplete, some items could not be downloaded from the Store. If they are on your computer, you can restore them by syncing with iTune
29. Connect iPad to iTune to sync with computer
30. Sync Music, Videos and Album Artwork

How to restore Ipad from previous backup that is not the restore list?

I did a firmware update for Ipad from 5.1.1 to 6.1
I backup my Ipad before I did it at 4.46am
Then I restore my Ipad so it will install IOS 6.1
However I accidentally set it up as new device with a differrent name (default suggested by itune which is "AL's Ipad")
Then I try to select my previous backup called "Ipad 3"
But I cant see "Ipad 3" from my restore list.
So can I restore my "Ipad 3" backup?

If you went through the process of restoring your iCloud backup, then tapped Show Older Backups when asked which backup to restore to and the backup you're looking for isn't listed, there's no way to recover it. You could check to see if you have an older backup on your computer that would have the data you're looking for by opening iTunes and going to Setting>Devices and checking the Backups list.

How to restore iphone from backup?

I recently updated to 4.1 but lost all my contacts... how can I restore them from my itunes backup? thanks

Maybe, unless there is a problem with your iPhone's backup and it sounds like there is a problem with it or you wouldn't have lost any contacts.
Although contacts are included with your iPhone's backup, contacts are designed to be synced with a supported address book application on your computer and should be available on your computer with or without an iPhone or any cell phone. Not a good idea to depend on your cell phone alone for this data, which can be lost or stolen.
To restore your iPhone with iTunes from your iPhone's backup, select Restore under the Summary tab for your iPhone sync preferences with iTunes. When prompted to update your iPhone's backup, as the first step after selecting Restore, decline this prompt.
Go to iTunes > Preferences. Under the Devices tab, how many backups are shown? If more than one, what is the date and time shown for each backup? If there is more than one backup, you may not want to select the current backup - select a previous backup when restoring your iPhone with iTunes. After the firmware is re-installed, you will be prompted to restore from the backup, which is the default selection. If there is more than one backup available, the most recent backup will be selected by default. If more than one backup is available, you can select from another or previous backup.

How to restore tablespace from backup

Dear all,
I need to restore my deleted tablespace from its backup. I backuped that tablespace with RMAN without catalog option. I connected the RMAN by the following way.
/home/oracle/db/bin/rman target / nocatalog
When I restoring the tablespace the following error occurs:
RMAN> run {
2> allocate channel ch1 type disk format '/disk6/backup/tek_backup/tek_bak1101';
3> restore tablespace tek_data;
4> }
Starting restore at 12-NOV-07
released channel: ch1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/12/2007 17:13:48
RMAN-20202: tablespace not found in the recovery catalog
RMAN-06019: could not translate tablespace name "tek_data"
Please help

Here I am posting what I have done. Now I have the backuped tablespace by RMAN. I tried to restore it but couldn't.
Please help
##### 1. create tablespace & insert some data to it.
[oracle@localhost ~]$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Nov 12 19:14:50 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn /as sysdba
Connected.
SQL> CREATE SMALLFILE TABLESPACE "TS07" DATAFILE '/disk6/TS07_1' SIZE 100M LOGGING EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO;
Tablespace created.
SQL> create table MBS200710_1 tablespace TS07 as SELECT * FROM mediator.MBS200710 WHERE M105 = 3
2 ;
Table created.
SQL> quit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
##### 2. backup TS07 with RMAN
[oracle@localhost ~]$ /home/oracle/db/bin/rman target / nocatalog
Recovery Manager: Release 10.2.0.1.0 - Production on Mon Nov 12 19:19:38 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: UCCS (DBID=1480994533)
using target database control file instead of recovery catalog
RMAN> run {
2> allocate channel c1 device type disk;
3> set command id to 'BBBackup';
4> configure backup optimization on;
5> sql "alter tablespace TS07 offline normal";
6> backup format '/disk6/backup/TS07_bak_%T_%U'
7> (tablespace TS07);
8> release channel c1;
9> sql "alter tablespace TS07 online";
10> }
allocated channel: c1
channel c1: sid=136 devtype=DISK
executing command: SET COMMAND ID
old RMAN configuration parameters:
CONFIGURE BACKUP OPTIMIZATION ON;
new RMAN configuration parameters:
CONFIGURE BACKUP OPTIMIZATION ON;
new RMAN configuration parameters are successfully stored
sql statement: alter tablespace TS07 offline normal
Starting backup at 12-NOV-07
channel c1: starting full datafile backupset
channel c1: specifying datafile(s) in backupset
input datafile fno=00052 name=/disk6/TS07_1
channel c1: starting piece 1 at 12-NOV-07
channel c1: finished piece 1 at 12-NOV-07
piece handle=/disk6/backup/TS07_bak_20071112_0uj0srn6_1_1 tag=TAG20071112T193502 comment=NONE
channel c1: backup set complete, elapsed time: 00:00:01
Finished backup at 12-NOV-07
Starting Control File and SPFILE Autobackup at 12-NOV-07
piece handle=/disk6/backup/controlfile/c-1480994533-20071112-05 comment=NONE
Finished Control File and SPFILE Autobackup at 12-NOV-07
released channel: c1
sql statement: alter tablespace TS07 online
RMAN> quit
Recovery Manager complete.
##### 3. drop tablespace including data files
[oracle@localhost ~]$
[oracle@localhost ~]$
[oracle@localhost ~]$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Nov 12 19:37:38 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn /as sysdba
Connected.
SQL> drop tablespace TS07 including contents and datafiles;
Tablespace dropped.
SQL> commit;
Commit complete.
SQL> quit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
#####4. restore deleted tablespace from backup
[oracle@localhost ~]$ /home/oracle/db/bin/rman nocatalog target /
Recovery Manager: Release 10.2.0.1.0 - Production on Mon Nov 12 19:39:59 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: UCCS (DBID=1480994533)
using target database control file instead of recovery catalog
RMAN> run {
2> allocate channel c1 type disk format '/disk6/backup/TS07_bak_20071112_0uj0srn6_1_1';
3> restore tablespace TS07;
4> release channel c1;
5> }
allocated channel: c1
channel c1: sid=76 devtype=DISK
Starting restore at 12-NOV-07
released channel: c1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/12/2007 19:41:48
RMAN-20202: tablespace not found in the recovery catalog
RMAN-06019: could not translate tablespace name "TS07"

How to restore iphoto from backup.

Guy,
I did a clean install of Mountain Lion from a Snow Leopard system that was upgrade to Lion, and need to restore iphoto from a latest time machine backup from Lion.
Can seem to figure it out.
Thanks.

For detailed TM questions the TM forum is a better place
The general answer to restoring in TM is to launch TM and go back to the time you want to restore from, select what you want to restore and click the restore button
LN

How to restore iPhone from backup, not working right

Hello, today I updated my iPhone to the latest version (6.1.2?) and after it was finished, or not finished, it came up on my PC saying it could not be updated and had to be restored for some reason. So, I restored it, knowing my phone backs up everytime I sync it. It last restored at 4 o clock today, before I updated it. So, I went to restore from backup, it started, ran for about a minute, then popped up saying it could not be restored from backup because the backup could not be found on my computer. I see the backup very clearly on my iTunes, it's there. Now it shows up like a new iPhone and it's wiped out. I had very important documents on my notes, plus text messages I needed, and this isn't working. I'm livid about this, please help.

hi can you help me please????
i backed up my iphone 4 yesterday as i was taking my iphone for repair, instead i recived a new iphone so i tried restoring it back on to my iphone.when i go through the prosses of restoring it i check my iphone but i stil haven't got anyting back.but on my itunes it shows me that i backed everytin up yesterday at 11:52 am which is correct so wy can't i get my stuff back???

How to Restore Files From Backup HD/Time Machine

I want to restore data from external HD, which backed up with Time Machine, onto new internal HD. If I restore from date prior to 10.6.1 upgrade (which resulted in HD failure) will I be restoring from 10.5? Do I install Leopard on new HD first? Both internal and external HDs corrupted by upgrade but professional diagnostics indicate data on external HD can be accessed.

panda88 wrote:
Both internal and external HDs corrupted by upgrade but professional diagnostics indicate data on external HD can be accessed.
Could you explain a little more about what you meant by this? The update to 10.6.1 should not corrupt an otherwise OK HD. It is probably worth the effort to try to figure out what caused this in case it is something that would continue to affect the HD's after the restore.

How to Restore notes from Backup?

Hi!
Yesterday I've upgraded my mac from 10.7.1 to .2.
Before upgrade I had all my notes in mail (synced in MobileMe) but after fisrt 10.7.2 reboot all my notes where deleted (on Me server too).
"Amen, I'll restore them tomorrow from Time Machine" I tought, but there was a surprise! If I go in Time Machine and I copy two .mbox archives of notes (one on Mac and one on MobileMe) in library folder, when I restart mail, program doesn't see them!!
How can I restore all my notes without restoring from time machine?
Thank you!!!!

cal124 wrote:
@pvonk, your advice was pretty worthless.
for others with this problem, here is the easy solution ...
http://support.apple.com/kb/TS4108?viewlocale=en_US&locale=en_US
and the harder solution ...
http://support.apple.com/kb/HT4946?viewlocale=en_US&locale=en_US
the harder solution may require this to help you show the hidden files so to recover deleted notes on iPhone...
If you synced your iPhone with itunes.
to restore from a previous backup, be sure to go into iTunes before you
connect your iPod Touch or iPhone and set iTunes > preferences > devices
and check “prevent iPods and iPhones from syncing automatically.This ensures we don’t erase the previously stored backup.

How to restore library from backup on external hard drive

I am helping my wife move her library to a new computer after the old one crashed. I backed up my wife's music library to an external hard drive by simply copying and pasting all the files in her My Music >> iTunes folder into the external hard drive. When she got a new laptop, I tried placing those same files from the external hard drive into the My Music >> iTunes folder on the new computer (overwriting the few default files that were there), but that didn't seem to work. iTunes does not acknowledge that any songs have been added. I also noticed that almost all of the files say "(protected)", although I'm not sure if that is having an impact on the failure.
Additional information: some of the songs are iTunes purchases and some are from CDs we imported. Because restoring involves more than just iTunes purchases, I can't simply plugin her iPod to the new laptop and use the import purchases feature.
Finally, I see a great deal of information in customer support about restoring from a CD or DVD, but not from an external hard drive, although an external hard drive is mentioned as one way to backup iTunes music, so I believe there must be a valid way. Any literature on that would be helpful as well.
Thank you.

EmmanIsaac,
Do you just want a new drive that can be read by Macs and PCs? I would suggest taking a look at MacMall and shopping for, at least, a 1TB drive (they're cheap these days) and, when you get it, format it as FAT32 on a PC. Then you'll be able (with some limitations) to share the drive on both platforms.
For the limitations on using FAT32, see here.
Good luck,
Clinton

Reinstalled Windows - how to restore iTunes from backup?

OK, here's the short succinct and none-waffley version of my question:
Under OSX there's a whopping big (xml?) file stored in the iTunes Library folder, but where is that on Windows? I've read about a Library.itl file, is that the same thing? If so, where on earth is it please?!?
And now for those who don't mind reading a bit, I'd like to explain my problem (a blank looking iTunes library after reinstalling Windows / iTunes) in a bit more detail. A lot of hard work and many listening hours went into crafting those smart playlists and I'd rather like to get them back if that's at all possible?
Here's what I've got to go on:
- the "iTunes music folder" is on a disk partition that remained untouched during the reinstallion process, so all my music's still there (else I wouldn't be quite so relaxed about it!!!)
- my "My Documents" folder is also on another untouched partion, but I don't think iTunes saves anything there does it?
- before reinstalling Windows I backued up my "Documents and Settings" folder from C drive. I assumed everything I'd need for restoring iTunes would be stored in the "Application Data" subfolder (or whatever Windows calls this in english - it's Anwendungsdaten in german)
So after reinstalling iTunes and before starting it for the first time, I copied my backup of "Docs & Settings/Rich in Berlin/Anwendungsdaten/Apple Computer/iTunes" to the corresponding place on C drive (and also the same named folder from "Local Settings"). Then I started iTunes, remembered that this is a PC not a Mac and saw an empty library window. Which brought me here.
As I wrote at the beginning, I suspect Library.itl has something to do with it. Can anybody confirm this and/or tell me where to find it, please?
Cheers
a computer designed by the devil Windows XP Pro iTunes 4.8 and why do so many only use this to show-off irrelevant items they own???
BeigeG3 400/256/40 OS921, PismoG3 400/640/40 Windows XP iTunes 4.8 and why do so many only use this to show-off irrelevant items they own???

iTunes operates as a database of information for your music files. The actual music files are stored on your PC, not within iTunes. iTunes keeps absolute references of the music file location and other information in its database file. This allows iTunes to use music files from any location on the PC: different directories/folders on the main HD, another internal drive, an external drive, or a network drive (or any combination of the above). Each song reference has a specific and hardcoded path so iTunes can find and play (or sync) it. Move the file, change the path, re-map the drive it is on, and iTunes will lose the file (giving you the '!' of a ‘Broken Link’). Lose, move or corrupt the ‘iTunes Music.itl’ file and your complete Library will ‘vanish’.
If you delete, corrupt, or otherwise lose your ‘iTunes Library.itl’ file, you will end up with a ‘blank’ Library within iTunes. Nine time out of ten, your underlying music files are still on the PC. They can be ‘re-Added’ via the File==>Add Folder/File menu command, but you will lose some of the music meta-data. Recovering your Library via backup copies of the iTunes database file, or from importing the XML file is always preferable.
The iTunes music information (meta-data) is stored in two places: the actual individual song files themselves, and the iTunes Library database file (‘iTunes Library.itl’). There is a corresponding XML file that is created by iTunes, but not directly used. See: What are the iTunes Library files?.
Song attributes stored directly in each music file are as follows: Artist, Album, Song Title, Year, Comments, Compilation tag, Lyrics, Genre , Grouping, Composer, BPM, Album Artwork, Bit Rate & Kind (Both not tags - inherent to the file itself).
Song attributes stored in the iTunes Library database file only are: Playlists, Ratings, Play Count, Last Played, Date Added, Date Modified, Equalizer, Volume Adjustment.
While it appears that all of the music attributes (except for Album Art) are also written to the XML file, when ‘Importing’ the XML file back into iTunes, it will not capture the Ratings, Play Count, Last Played, and Date Added attributes. The XML file can be somewhat useful, but it is usually better to have legacy copies of the ITL file for restoring your complete Library.

How to restore contacts from backup?

My husband's contacts on his iPhone 4S somehow magically got deleted - so he claims. If I plug his iPhone into my Mac how do i restore his contacts?

I managed to work around this. Not sure exactly what I did differently, but somehow I got Address Book to display separate "iCloud" and "On My Mac" lists, and then I could drag and drop groups from "On My Mac" to "iCloud". Left a lot of duplicates, again, but the "Look for Duplicates" menu command cleaned them up.

RESTORE iPAD FROM SPECIFIC BACKUP

Hi guys,
I am currently running 4.2.1. WIth the hype of the new 4.2.1, I synched my iPad quite a few times. As a result, many backups were created. The problem is, I deleted a VERY important Note just after my first backup. I tried to restore the iPad form the backup, but iTunes only gives me the five or so most recent backups as options. I already Googled around and found the directory for the backups (User/Library/Application Support/MobileSync/Backup), but there are many weird named folder and I cannot which one is from which time. Also, if I were to find the correct backup, how do I restore from that one?
Summary:
1) Please explain to me how to recognize the date (more precisely, hour) each backup was made
2) Please explain to me how to restore form that specific backup.
Thanks!
iPad1,1 64GB WiFi-Only, 4.2.1 iOS

Are you sure you actually have the backup files on your computer? They are located at:
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Mac: ~/Library/Application Support/MobileSync/Backup/
As part of your computer's regular backup routine (assuming you have one) you should include this folder to ensure that you can always restore iPad from backup file (i.e. a backup to the backup).
More Visit: http://www.recovery-android.com

How to restore ipod from recent backup.

I just wiped out some of my ipod content when syncing and would like to restore my ipod from a previous backup. I am not sure how to do this. I clicked on the restore button and it tells me it is going to reset my ipod to factory settings. How do I tell it to restore to a previous backup?

Where Backups are stored
The folder where your backup data is stored changes depending on the computer's operating system. Since iTunes only keeps one backup per device, you should ensure the backup folder is included in your periodic data-backup routine.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
For More info visit:http://www.ipadconverter-mac.com/restore-ipad-from-backup/

How to restore ipad using last backup in icloud

how to restore ipad using last backup in icloud

Restore from iCloud Backup
1. Erase all contents and settings (Settings>General>Reset>Erase all content and settings)
2. You'll be asked twice to confirm
3. You'll see Apple logo and progress bar
4. You'll see a big iPad logo on screen
5. Configuration start
6. Set language
7. Set country
8. Enable Location Service
9. Select network, enter password and join network
10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
11. Selected Restore from iCloud Backup
12. You'll be required to enter Apple ID and Password
13. Agree to Terms and Conditions
14. Select Backup file
15. You'll see progress bar
16. Red slider will appear; slide to unlock; step #1 to #16 is fast
17. Pre-installed apps will be restored first
18. Message: Purchased apps and media will now be automatically downloaded
19. You'll see a pageful of apps with Waiting/Loading/Installing
20. When the restore process is complete, your device will restart. You should connect the device to iTunes to sync data not contained in the backup (such as music, videos, apps, and so on).

How to restore iPad from backup

Similar Messages

Maybe you are looking for