How to restore iPad without Redownloading iOS6

I have already downloaded via WiFi and trying to restore it via iTunes. It wants to download iOS6 before restoring. I know I can do it via the iPad but can I do it without downloading what I already have?

You need to put the iPad into recovery mode, if you succesfully do that then your computer's iTunes won't prompt you to enter the passcode on the iPad : Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled

Similar Messages

  • How to restore iPad without updating?

    How to restore iPad without updating? Why this stupid apple didn't put two buttons for restoring and updating iDevice.. they should include  "RESTORE ONLY"

    Performing a restore from a backup does not upgrade the ios.

  • HT4097 how to restore ipad without updating

    hi.i tried to update my ipad' ios
    some few days ago but due to slow internet connection my ipad could not finsh updating. now i want to quit the update so i can use the ipad but i cannot restore under itunes without updating. any help from anyone who has encountered similar problem would be welcome. thanks!

    You need to put the iPad into recovery mode, if you succesfully do that then your computer's iTunes won't prompt you to enter the passcode on the iPad : Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled

  • How to restore ipad without password

    hi
    I forgot my ipad password. If I try to restore then it is asking for password. How do I restore my ipad to original settings ?
    Thanks
    Sandeep

    You need to put the iPad into recovery mode, if you succesfully do that then your computer's iTunes won't prompt you to enter the passcode on the iPad : Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled

  • HT1495 how to restore iphon-without backup, after it synchronization from ipod

    how to restore iphon-without backup, after it synchronization from ipod

    Thanks Eric,
    After inserting the original DVD I installed OSX and after reboot I had a working computer.
    There was no opportunity to restore the TM backup. however when I rebooted from the
    DVD again I saw that possibility from a menu of the install utility.
    I ran through the restore over night (8 hours) and when I woke up, I had my computer back!
    Thanks for helping me out.
    Cheers, Rob

  • How to restore ipad using last backup in icloud

    how to restore ipad using last backup in icloud

    Restore from iCloud Backup
    1. Erase all contents and settings (Settings>General>Reset>Erase all content and settings)
    2. You'll be asked twice to confirm
    3. You'll see Apple logo and progress bar
    4. You'll see a big iPad logo on screen
    5. Configuration start
    6. Set language
    7. Set country
    8. Enable Location Service
    9. Select network, enter password and join network
    10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
    11. Selected Restore from iCloud Backup
    12. You'll be required to enter Apple ID and Password
    13. Agree to Terms and Conditions
    14. Select Backup file
    15. You'll see progress bar
    16. Red slider will appear; slide to unlock; step #1 to #16 is fast
    17. Pre-installed apps will be restored first
    18. Message: Purchased apps and media will now be automatically downloaded
    19. You'll see a pageful of apps with Waiting/Loading/Installing
    20. When the restore process is complete, your device will restart. You should connect the device to iTunes to sync data not contained in the backup (such as music, videos, apps, and so on).

  • TS3694 How to restore ipad on dfu mode error 9?

    Hi guys
    Need help how to restore IPAd in dfu mode error 9?

    Hi guys
    Need help how to restore IPAd in dfu mode error 9?

  • HT201442 I need to restore ipad WITHOUT upgrading to iOS 7!!  I need the iOS that is on it!! (6.1)

    I need to restore ipad WITHOUT upgrading to iOS 7!!  I need the iOS that is on it!! (6.1)
    I have an app I use in my band that ***** on iOS 7!
    Why does Apple force it down our throat?!?!  I want what is on my iPad!!  6.1

    Not possible
    If you restore it will be running iOS7
    Allan

  • How to Restore iPad from iPhone Backup?

    I have an iPad and an iPhone, now I have a problem, I want to Restore iPad from iPhone, but Idon't know how to do this job, can you give me some advise about how to restore iPad from iPhone backup file?

    Restore from iCloud Backup
    1. Settings>General>Reset>Erase all content and settings
    2. Tap Erase
    3. You'll see Apple logo and progress bar
    4. Hello
    5. Slide to set up
    6. Set language
    7. Set country
    8. Choose Wi-Fi network; enter Wi-Fi password
    9. (a) Use Location Service (b) Don't Use Location Service
    10. Select option
    11. (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
    12. Selected Restore from iCloud Backup
    13. Enter password for iCloud
    14. Agree to Terms and Conditions
    15. Setup Apple ID
    16. Select backup
    17. Restoring from iCloud
    18. Hello
    19. Restore Completed. Your iPad was restored successfully. There are just a few more steps to follow and then you're done!
    20. Continue
    21. Finish setting iCloud enter Password
    22. Updating iCloud settings
    23. Create a Passcode
    24. Welcome to iPad
    25. Get Started
    26. Restoring Apps and Media
    27. Enter Apple ID and Password
    28. Notice: Restore Incomplete, some items could not be downloaded from the Store. If they are on your computer, you can restore them by syncing with iTune
    29. Connect iPad to iTune to sync with computer
    30. Sync Music, Videos and Album Artwork

  • How to unlock iPad without itunes

    How do you unlock the IPad without having a computer for iTunes.  My niece somehow changed her code, & forgot what it is. Can she use my iTunes to recover?

    Yes, she can use your iTunes. However, she will lose anything that she
    has not backed up to iCloud or her computer (if there is one). In many
    countries, media and apps can be redownloaded if purchased via iTunes.
    Photos/movies taken with the iPad that were not synced to a computer or
    iCloud will be gone (iCloud limit is 30 days and 1000 photos - if I remember correctly).
    If her iPad is in recovery due to forgotten password, there is nothing else to
    do besides restore.

  • How to restore ipad in recovery mode

    I am trying to restore an iPad Gen 3 on IOS 6 using recovery mode but iTunes cannot find the backup file on my PC while the iPad is in recovery mode.
    However, on my PC, iTunes shows that a backup exists when I say that I need to do a restore. The restore can't work due to the passcode being in place and not remembered. The iPad needs to be restored becausee the person forgot their passcode.
    Any ideas?
    Thanks!

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • After a backup, clicked on upgrade IOS via Itunes.  Upgrade failed and now IPAD is locked, showing a graphic of a cable connector, an arrow and an Itunes symbol.  Ipad is locked there.  How to restore IPAD?

    Upgrade my IPAD from 8.1.3 to 8.2 via Itunes (from Windows Computer)
    First I backed up the IPAD via Itunes on my Windows laptop.
    Then I click upgrade IOS to 8.2 on Itunes.
    Later got a upgrade failure pop up window.
    Now IPAD is locked with a blank screen showing a cable connector and an arrow pointing to Itunes symbol.
    The IPAD does not boot, and the Itunes does not recognize the IPAD.
    turning on/off the IPAD does not change the display.
    How to restore or reboot the IPAD?

    I rebooted the computer and tried once again using a different USP port.  This did the trick!.  I was able to run the IOS update and it stuck and timed out while the Itunes was indicating that it was verifying the IOS installation (on ipad I could see a grayed working bar).  After it timed out the IPAD completed the task, and now it is working again.
    Thanks!

  • How to restore ipad

    I do the upgrade 5.0
    All photo and data in ipad is gone.
    Can it be Restore ?
    I open the mobilesync and I find bund of code file  ,but  i could not restore back ?
    The photo i need it back urgently.
    What can i do and can it restore back
    Thanks!
    Delon.

    This article will explain how to restore your iPad. You will want to restore from a backup in order to get your data back. If the photos were in your Camera Roll or Saved Album, those photos will be restored as well. Read this for more information on restoring.
    http://support.apple.com/kb/ht1414
    If the photos were synced to the iPad from iTunes, just try syncing again to retrieve them.
    Don't fool around with the MobileSync folder on the hard drive. There really is no need to do anything with that folder at this point.

  • HT4113 How to restore iPad mini 2

    How to restore a disabled iPad

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. If you did not do step 4 properly, start all over again.

  • How to restore files without TIme Machine

    Help! Anyone know how to restore files on tiger? I lost my WHOLE library of photos! And I don't have back ups. :'(
    I was running short of disk space, so I decided to clean up some unnecessary files on my disk. I once imported all my photos from iPhoto to Aperture. Since I usually use iPhoto, I decided to delete all the photos from Aperture library. But the next time when I opened my iPhoto, I found the photos in iPhoto library were also deleted!!! Now there are only thumbnails of all the photos!
    Please! Anyone know how to restore the photos on Tiger? I can't afford to lose all my photos. :'(

    Try Subrosasoft's FileSalvage.
    If that doesn't work try Prosoft Data Rescue II
    If that doesn't work, take it to a professional such as http://www.drivesavers.com/
    And in the future always keep backing up your data as my FAQ* explains:
    http://www.macmaps.com/backup.html
    - * Links to my pages may give me compensation.

Maybe you are looking for

  • EMAIL Invoice to customer

    Need some help on Email invoicing. I have a requirement to send the invoices via email in PDF format. I configured an Output type with the medium u20185u2019, it works fine. However there is another requirement to add some specific text as the conten

  • Directory Utility wont connect to Open Directory Server on Xserv 10.5.1

    I am trying to set up the ical service on the xserve, I have the server set up as the OD master when I went into the directory utility app it would not located the server until I changed the search policy to custom which included LDAPv3. Once I did t

  • Looking for an app that is easy to create a work schedule on PC and download to phone.

    We have a small group of managers who have blackberry's and were wondering if there is an app that would allow us to easily download our individual schedules to our phones.  We currently use excel to create the work schedule and even though we can vi

  • A question about transport of the change to InfoSet

    Hello Expert, I made a change to the infoSet MMIV03 by Transaction SQ02 and add MKPF-USNAM into the field group INVENTORY MANAGEMENT. Then I clicked Save button, but there is no pop up window to ask me to save into transport. I clicked "Generate" but

  • Command line parameters and resuming

    Hi, I am researching for a client who wishes to have several students (K-12) using Adobe Captivate course on the same computer. Another constraint is that a course is run from DVD (1+ GB in size) so it's published as standalone application (.exe for