How to Restore ISO 5.1.1?

How to Restore ISO 5.1.1?

You mean how to restore the iOS software? If you have the original iPad you can restore iOS 5.1.1, if you have any other iPad you will be restoring iOS 7.0.4, if you restore your device.
Read more here.
Use iTunes to restore your iOS device to factory settings

Similar Messages

  • How to restore apps after update

    I have an IPad2 with 4.3.5 and due to some of the newer apps I was forced to upgrade to the newer 6.1.3
    before i updated the IOS i backed up with the itune to my laptop. 
    i than installed the new ISO, when it is finished it acted as it is a new IPad there were none of my old apps.  my pics did move over.
    I than clicked on restore under the backups and it took about 8mins and when it finished  I still had nothing on my Ipad??
    is there is a way to restore my old apps or i have to redownload everything due to the newer IOS?
    thanks

    Is this how you restore from iTune Backup?
    1. Settings>General>Reset>Erase all content and settings
    2. You'll be asked twice to confirm
    3. You'll see Apple logo and progress bar
    4. You'll see a big iPad logo on screen
    5. Configuration start
    6. Set language
    7. Set country
    8. Select Network and input Password>Join
    9. Enable Location Service>Next
    10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
    11. Select Restore from iTune Backup
    12. You will see picture of USB cable pointing towards iPad
    13. Connect iPad to iTune (make sure iTune is on standby)
    14. Tap Continue (computer)
    15. Restore iPad from Backup (computer)
    16. See progress bar with estimated time (computer)
    17. See Restore in Progress on iPad
    18. See Apple logo
    19. See Apple and Progress Bar
    20. Slide to Unlock
    21. Copying Apps back to iPad (computer)
    22. You'll see Loading/Installing/Waiting below the Apps (iPad)
    23. Sync Music/Podcast/Movies to iPad (computer)
    24. Sync completed (computer)

  • How to restore old prefs, etc after clean reinstall of 10.3.9?

    Due to a fiasco with Drive Genius I was forced to reformat and reinstall 10.3.9. Luckly, I was bright enough to manually copy over the entire contents of the drive to a firewire drive before I started the drive genius project.
    I was able to find directions on how to restore my users which worked perfectly.
    I've copied all the apps back. But all the apps were in the main drive rather than in users, so the prefs, registrations etc are, I assume, stored in the old library.
    Is there a way to replace the new library with the original to avoid several days work digging out the original packaging to get the serial numbers for re-entering so I can get back to work right away?

    The serial #s, etc were in fact in the original main library. I was able to restore the use of all the programs by manually replacing the missing items in each folder in the library. It took over an hour, but I got it all back and saved me from having to rummage through storage boxes for the original documentation to retrieve and re-enter all the info.

  • N8: How to restore music store widget after hard r...

    Hi
    I lost all  nokia N8 widgets including Music store after I hard reset my N8.
    I have really been searching but have been unable to find a work around for this. I am unable to play any OVI music on my phone as it searched for a license and ends up saying that this is not my registered device.
    I really need some help.
    Nokia care has failed to solve my problewm so far.
    HELP!
    MODERATOR'S NOTE:  We have edited your post. Please refrain from posting irrelevant characters. Posting with a brief and concise concern would be enough to gather solution.

    I have been able to restore everything....except the Ovi Music Widget after a hardreset.
    This might help - 
    http://www.nokian8blog.info/2011/06/how-to-restore-ovi-music-unlimited.html

  • Dissapeared footer (where is written what page is loading and so on) how to restore it?

    Dissapeared footer (where is written what page is loading and so on) how to restore it?
    there is the screenshot ( http://j.imagehost.org/0213/Clipboard03.jpg )

    View > Statusbar = click it

  • How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.

    How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.

    Check for Updates.
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%208/78d42b19fa42e8d83b5 5a65e1333373f_zpsf58bbe10.jpg

  • My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back.  It's the same for all icon and websites, does anyone know how to restore?

    My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back.  It's the same for all icon and websites, does anyone know how to restore?

    Wow!  I think I had this same issue just last night.
    I was cleaning my macbook pro retina on the outside.  Then I opened it up and was wiping dust off the monitor and I can't pinpoint exactly when, but the colors changed suddenly.  It looked super strange, it was like green halo's and it looked worse when looking at it at an angle.  Of course I took no pictures!!!  I was freaking out that my 2 grand laptop was busted and I somehow removed a protective film or something.
    But I digress...  The image looked very green and spacey, it was almost a neat effect.  After about 5 minutes it started to look a little more digital though.  There were straight lines of this halo effect on the edges and top.  After about 10 minutes it turned into a predominate issue with the blacks on screen.  I could open a web browser and it was unnoticable on a white background.  After about 15 minutes, you could only barely see the green cloud effect if you looked at the monitor from an extreme angle.  After about 20 minutes, it was completely back to normal, I almost feel paranoid like I see a halo or something strange.  But I believe that might be all in my head now.
    So yerp, lemme know what you guys figure out.

  • My old phone broke and I am having trouble figuring out how to restore my contacts on my "new" phone (LG ENV2 Black)...

    My old phone broke and I am having trouble figuring out how to restore my contacts on my "new" phone (LG ENV2 Black).  Apparently the phone is so old that I am unable to install Backup Assistant on it, which sucks.  I have all my old contacts saved on my computer as a CSV and also another copy on a micro SD as VCF.  I have tried moving the CSV from my computer to my ENV2 via both Bluetooth and USB cable, but had no luck with either of those.  I also tried to pop the micro SD into the ENV2, and although I can load all my old pictures/videos/etc. from the micro SD, I do not seem to be able to restore the contacts from card.  I know there has to be some way to manually transfer these files; the contacts are still on my old phone as well; but I was unable to use the transfer wizard for that because my old phonedoesn't seem to be supported by that (Pantech Jester 2)

    Google a program called bitpim, that might do what you want.  Never used it but it's been talked about on the forums.  Other than that you might have to input them manually.  Mary

  • Any ideas about how to restore old appearance on my iPhone?  I just updated to IOS7 and really dislike the new appearance. I have to log on to see percentage of power used since I can't see it on my opening screen. I also want the gray folders back.

    I just updated to ios7 and do not like the redesign. I want the old design back. Has anyone found out how to restore the old appearance. I do not understand why the change. I now have to unlock my phone to be able to check my battery level because my screensaver has a light color in the upper corner and I can't read the text. I want the gray panel back.

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • HT4623 my iphone has been erased and i do not know how to restore it?

    my iphone has been erased and i do not know how to restore it help please?

    Connect it to the computer that it normally syncs with and select restore in iTunes.
    This is also covered in the Users guide if you want/need specific details. Try reading the users guide before asking more basic functionality questions.

  • Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage  to my Ipad with different name but with  software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back

    Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage  to my Ipad with different name but with  software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back

    I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
    Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    Manage your Apple ID and see if that does the trick
    Hope that helps

  • How to restore my iPhone , no internet , I cloud setting on and forgot passcode

    I Have an iPhone 4
    I can't remember my passcode so My phones disabled
    i have my iCloud setting on but not internet so  I can't restore via find my laptop or find my iPhone
    Please can someone tell me how to restore my phone or atleast get into it
    MANY THANKS SHANNON

    shannonMer wrote:
    I Have an iPhone 4
    I can't remember my passcode so My phones disabled
    i have my iCloud setting on but not internet so  I can't restore via find my laptop or find my iPhone
    Please can someone tell me how to restore my phone or atleast get into it
    MANY THANKS SHANNON
    Take your laptop to somewhere that has wifi so you can restore your phone using iTunes.
    Nothing else you can do if you forgot your passcode and don't have internet.
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    How are you able to post on this forum if you have no internet?

  • How to restore my Macbook Pro

    Does anyone knows how to restore a Macbook Pro?

    If you mean erase the drive and reinstall the Mac OS X read here >  Mac OS X 10.6 Help: Reinstalling Mac OS X

  • How can I find my password for iTunes?  Forgot it and can't see how to restore or change

    How can I find my password for iTunes?  Forgot it and can't see how to restore or change it.  It is not the same as the apple id password - or so my iPhone iTunes says - Help

    I don't want to reset my apple ID password. I know it's right. It doesn't work on Itunes to restore my phone. All the passwords I know are not working. I want to know why.

  • How to restore after disk replacement?

    l just had my iMac hard disk replaced due a recall.  Before taking it in I made a disk image with disk Utility and securely erased the disk.  I also have Time Machine back-ups going back several months.  On getting the machine back, since it contains sensitive data securely erased the new hard disk and started up with the Snow Leopard boot disk.  When I tried to scan the disk for reinstall I get an error "Unable to scan 'image name' (internal error)".  I tried several times with the same result.  I then tried to restore from Time Machine and got a message that No Mac OS X backups were found."
    I installed Snow Leopard and again tried both approaches with the same result.  I can see to Time Machine backups on the disk but when I restore it simply copies the files into "/Volumes.  Anyone have ideas on how to restore the system?

    Rodocki wrote:
    The disk image did not.  Not sure what's wrong with the disk image burn and restore process but it is clearly not dependable.
    Unless you tested and restored it after making it, it's a poor choice, since it requires three volumes: the boot volume, source volume, and a destination volume. A bootable backup/clone made with Carbon Copy Cloner or SuperDuper! is a much better choice. BTW, it's also significantly faster to restore one of these than it is to restore a disk image.

Maybe you are looking for

  • NT Authentication in Weblogic 6 with Windows 2000

    Has anyone had success getting the Ntrealm running on W2K with weblogic 6sp1? I set everything up according to the 6.0 docs (descibed below) and when I access my web application (that i'm protecting) the login prompt doesn't accept my NT login, but r

  • Trying to un-hide content type using powershell

    I'm using this script below and am writing back the library name and if the content type is hidden after the update. Everything points to being correct yet when I go back to the library settings the eDocument Link is still hidden. What am I missing?

  • How to implement registration mechanism in JavaME

    I have my game in JavaME completed and ready to sell it. How do I implement registration mechanism so that only the user who paid can run my game?Thanks in advance

  • Location of reports server start/stop script.

    Hiii.. can anyone tell me the location of reports server script in R12, so that i can restart the reports server. And how can i restart the reports server..?? Thanks..

  • I have a C000 error message when trying to turn on my Pixma MG8120.

    I replaced some ink cartridges and immediately received a C000 error and cannot turn the machine on now.  There are no paper jams.  I tried putting the old cartridges back in - but that didn't help.  The printer has been working fine til now.  Help?