How to restore mac os 10.4.11, how to restore mac os 10.4.11

my mac g5 is not starting up it takes time on start up i have tried to reset PRAM , is not working the same at holding the mac button + v to safe boot is not startng up what is with it?

The "v" key at startup is not Safe Mode. Try holding the Shift key down and restart for Safe Mode. This will disable extensions and help it start. It also checks some things out.
Can you start it up from your Tiger disc? Hold the C key down at startup until you see the Apple.
Your hard drive may be going kaput. Hope you have a good backup.

Similar Messages

  • How restore aol sent mac mail from time machine?

    I am using mac mail and an imap connection to aol.  I also have a time capsule and use time machine for backing up. Yesterday I stopped receiving incoming mail in mac mail and tried deleting the aol account in mac mail and then setting it up fresh.  I was shocked to find that my 25,000 AOL sent emails did not restore! I was told by an apple genius bar rep several months ago that once mail was on my machine that the emails would NEVER be lost.  Apparently this is not true.  When I open mac mail and go into my time capsule using time machine, however, do not see the SENT mail icon under AOL--it goes away?  When I try to restore the aol mail from the day before the incident the only thing that comes up is the one Sent Mail mssg that I sent AFTER the deleting and restoring of my AOL account in mac mail. The only relevant post I have found is the one below which was posted in 2008.  Please let me know there is a way to get back my sent messages.  I can't get them directly from the aol server because the server does not save messages that are sent from any client but AOL. Thanks.
    http://raffyjohn.com/2008/01/29/restoring-apple-mail-and-your-emails-from-time-m achine/
    Restoring Apple Mail and Your Emails from Time Machine
    filed under: How-To tags: mail, timemachine Tuesday, January 29, 2008, 11:31 am
    UPDATE (25 August 2010): Please note that this post is well over 2 years old and as Tim pointed out in the comments below, this method may not be the best solution for restoring emails. According to his restore efforts, changes where made to the timestamp from the date in which they were received to the date in which they were restored. I have not tested this myself.
    The hard drive on my PowerBook completely died the other day, but I luckily had been running Time Machine backups since upgrading to Leopard. (I wasn’t all that ****** off seeing as I was eager for an excuse to replace my wimpy 40Gb hard drive with a new 160Gb drive). I fumbled a bit, looking for a specific Apple Mail restore tool. I knew where all my emails lived, but I thought that Apple would have a specific means for restoring apps like Mail. So I created this mini-tutorial on how to restore Apple Mail from Time Machine simply because I could not find this method elsewhere.
    Supposedly, If you attach your Time Machine backup drive, open Apple Mail then launch the Time Machine application, you are presented with historical views of Apple Mail. This did not work for me, the historical views were just blank, so the steps below do not take this approach.
    Restoring Your Emails from a Time Machine Backup
    Warning: If you have already setup Apple Mail with your accounts and preferences, this will negate ALL your doings.
    Note: This process will restore all your email accounts, preferences, passwords, smart mailboxes, etc.
    The How-To
    Before loading Time Machine, open the Finder and navigate to Home Folder (username) -> Library. In there will be a folder name “Mail”. Rename it to “Mail (default)” (Select the folder then hit the Return key to rename).
    Mount your Time Machine Backup Drive (ahem, plug it in).
    Control + Click the Time Machine Application and chose “Browse Other Time Machine disks…”. This, of course, brings up the historical view of your backups.
    Go back to your most recent backup (2nd window back) and navigate to Home Folder (username) -> Library. Select the “Mail” folder and click the restore button (bottom right).
    Once the restore is completed, open Apple Mail and you will be presented with an import wizard (below). Simply follow through the prompts and you will be good to go.
    That’s it!UPDATE (20-January-2009): After step 4., also restore ~/Library/Preferences/com.apple.mail.plistThanks Jon C.
    If you have multiple mail accounts, you should also restore the ~/Library/Preferences/com.apple.mail.plist file as well. This will ensure all of your account settings are imported. – Jon C.
    Follow me on Twitter here.
    40 Comments
    Chucho
    May 13th, 2008 at 11:11 amThanks it’s a great hint, you should post it in macosxhints.com
    Westin
    May 19th, 2008 at 3:28 amAwesome content and great instructions even for stupid people like me. Thank you so much for posting this. It worked like a charm and really is appreciated at 2:30 a.m. after hours of reinstalling junk.
    Slippery Snake
    June 23rd, 2008 at 9:15 amThis worked. However, I had three email accounts, and it only imported one. My Smart Mailboxes were not imported either.
    Jon C
    July 30th, 2008 at 2:50 pmIf you have multiple mail accounts, you should also restore the ~/Library/Preferences/com.apple.mail.plist file as well. This will ensure all of your account settings are imported.
    Joseph Hurtado
    August 26th, 2008 at 11:23 amRaffy,This tip is worth it’s weight in gold! Thanks so much for posting such a well though out recipe for a Mail Rescue operation.Just put Jon’s advice on the article, that is also very valuable!Take care,Joseph Hurtado
    from Toronto
    Cory
    December 3rd, 2008 at 9:25 amYou saved my life! Thanks!
    Drew
    January 19th, 2009 at 12:08 amCheers Great tip! Thank you very much for your time!
    Lizart
    May 23rd, 2012 at 2:00 pmStill working in May of 2012! Thanks so much!
    source
    May 29th, 2012 at 11:11 amIm getting a teeny problem. I cant get my reader to pick up your feed, Im using bing reader by the way.
    Bruno Zysman
    May 31st, 2012 at 4:56 pmThanks so much for this tips
    I could get back my 170 000 mails in 5 hours thanks to this post, after having tried for few hours without success…Bruno

    Don't try to restore the file; restore the Note. Go in Mail to the mailbox where the note belongs. Enter Time Machine from there and step back until you find the Note.

  • I transferred data from my external hard drive to my restored Mac Book Pro via migration assistant and now my external hard drive in time capsule has red minus signs. How do I get rid of that without getting rid of any of my data?

    I used Migration Assistant to transfer my data from my external hard drive via Time Capsule to my restored Mac Book Pro. When I now go into Time Capsule I there are red minus signs in the corner of all the folders that are contained in my back up. How do I get rid of this and access my previous back-ups?

    Select the drive and Finder > Get info and at the bottom "ignore permissions on this volume"
    You can copy the files, but the ownership on the files still belongs to the other user account, once your done copying, then perform a #6 Reset Users Permissions and that will set all the ownership to that account.
    ..Step by Step to fix your Mac
    Another method is to copy the entire folder, then change it's permissions.

  • Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

    Urgent help needed - new to Macs, accidently cut and paste over top of photo folder and now no sign of folder or file, no auto back-up in place, how can I restore photos pls

    Thanks for prompt reply, yes we have tried that but have now closed down the browser we where the photos were.
    We haven't sent up time machine, do you know whether there is any roll-back function on a Mac?
    Thanks

  • I restored an iphone on a mac that it hadn't been previously synced with, and then accidentally clicked the sync button and now the music library on my mac is gone - can I get it back?  If so, how do I get it back?

    This is a crazy circumstance of events.  We have an iphone that we use as our office line.  My husband accidentally got his iphone wet so while we were submitting it to be replaced through AT&T insurance plan, I had taken the sim card out of the office iphone and put his sim card into it and he was using it for a couple weeks.  Somewhere on this forum I had found the instructions for doing this and it worked.  He set a passcode on it while he was using it.  Then he got his new replacement iphone and we switched simcards back and was good to go with his newly replaced iphone.  In the meantime the other office iphone had been forwarded to me and we at that time didn't have another person working in the office so the iphone sat off for about 6 weeks maybe.  Of course, during those 6 weeks the passcode, that was set on it, was forgotten - tried a few different things he thought that he'd set it to with no luck.  So I looked up what  needed to be done and how to restore the iphone.  This particular iphone had not been plugged into a computer since having the original sim card put back into it after my husband had used it with his sim card so it wasn't able to get past the not having the correct passcode by just plugging into a computer that it had been synced with.  I restored it.  And this maybe is where I messed up or where maybe the new Iphone/Itunes OS messed up.  I did accidentally check the sync button once the iphone was restored.  I looked at Itunes and realized the music in the library on the computer was gone as well as the playlists.  This is such a bummer because this is the business macbook pro and we run boat charters so all of that music is what is on the boat's ipod and played during the charters.  There are playlists for sunsets, for cloudy days, multiple reggae playlists, etc. totaling 80 different playlists and tons of music - so much hardwork went into making those.  Is there any way to get it all back????  Please help if you can - I'd be ever so grateful.  Thanks.

    When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive.  It would be a few months old so it wouldn't have the complete library on it....any ideas?  I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

  • I updated to Firefox 4.0.1 and can no longer use the thumb/finger spreading feature on the trackpad of my Mac Powerbook (Mac OSX 10.6.7) to enlarge text on websites. How do I restore this function?

    I updated to Firefox 4.0.1 and can no longer use the thumb/finger spreading feature on the trackpad of my Mac Powerbook (Mac OSX 10.6.7) to enlarge text on websites. How do I restore this function?

    * [/questions/777886]
    Some gestures have been removed in Firefox 4.
    You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
    browser.gesture.pinch.in -> <b>cmd_fullZoomReduce</b>
    browser.gesture.pinch.in.shift -> <b>cmd_fullZoomReset</b>
    browser.gesture.pinch.out -> <b>cmd_fullZoomEnlarge</b>
    browser.gesture.pinch.out.shift -> <b>cmd_fullZoomReset</b>
    browser.gesture.pinch.latched -> <b>false</b>
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    You can use the Filter bar at to top of the about:config page to locate a pref more easily.

  • How can I configure iCloud so it doesn't restore deleted or moved emails on my Mac?

    I moved to iCloud, and so far it looks like everything is where it's supposed to be. My question is about syncing. When I delete an email on my Mac, iCloud restores it. How can I configure iCloud so that changes I make on my Mac and my iPhone stay changed?

    On the Mac in System Preferences > iCloud
    Make sure Mail & Notes is selected.
    ON the iPhone tap Settings > iCloud
    Make sure Mail is switched on.
    And try restarting your Mac and iPhone.

  • Help! How can I restore iTunes/iPhoto library from Time Capsule to new Mac?

    Sorry to trouble you, because it looks like this should be an easy thing, but I can't find an answer anywhere...
    I've got an 2008 MacBook Pro that suddenly began to suffer start up problems. Sometimes it boots to a black/grey screen and sometimes the screen/mouse freezes after only a few minutes of use.
    I've borrowed my brother's Mac until I can find out how to get mine repaired, so I'd like to copy over my iTunes and iPhoto stuff from a Time Capsule (where I'm hoping it hasn't been damaged) to his Mac. I only want to copy the iTunes and iPhoto stuff, without filling up his computer with all my other junk.
    Is there an easy way to do this? Thanks!

    Hi ...
    I've found a solution to my problem.
    Time Machine locates extenal HDD backups differently depending if they were done via a network or via a USB/FireWire/Thunderbolt connection.
    My initial backup was done via a direct Thunderbolt connection. I ran into the above issue b/c the second time when I tried looking for the backup file the HDD was conencted to my iMac and I was accessing it via a network conenction.
    I simply connected the drive directly to my MacBook pro and ... voila. I was able to see the backup, select the iPhoto library and begin the restore.
    Hope this helps.
    BTW - I found this out by reading the 'blue box' selection on this page: http://pondini.org/TM/E2.html
    (Thanks goes to Pondini!)

  • How to restore from Time Machine WITHOUT install discs using a second Mac

    It's a question that is asked repeatedly all over the web by Mac users like me that bought in to Time Machine (TM) on the assumption that if their computer died one day it would be a piece of cake to restore from it, only for that day to come and then to be told "ahh, okay the first thing is to get your computers install discs..." (loud crashing sound of world falling around ears).
    I've never been able to afford a new Mac and both of my machines were bought second-hand. Neither came with Leopard (both have Tiger and have been upgraded to Leopard via the net). This was never supposed to be a problem as I've been backing up with TM. However it appears that Tiger discs are as much use as an inflatable dart board when it comes to using TM. So I've been faced with the possibility of having to spend £130 (about two hundred Pres Sheets, Yankees) on the Leopard install discs just so that I can have the option of restoring from TM. Bonkers.
    However after much nashing of teeth, a very long weekend learning all sorts of things about 'Target Mode', 'Single User Mode', 'Verbose Mode', 'Open Source 9' etc the following solution has worked without the need to go out and buy those over-priced discs...
    What you will need:
    1 broken Mac requiring restoration
    1 second donor Mac running Leopard (or Snow Leopard so long as the broken Mac can run it)
    1 firewire cable with the correct fitting at either end to attach both Macs together
    1 Time Machine backup
    Note: The following is for when you have given up trying to boot from your hard drive. In my case I couldn't boot in to Safe Mode etc. so was forced to format my drive and re-import everything. If you've read this far I'm assuming your at the same point as well and have tried everything else that's out there first.
    Also - both my Macs are Power PC's so can't run Snow Leopard, so I can't say 100% this will work with SL (Intel) machines. From what I've read Snow Leopard will work with this procedure too, but if you've found differently please feel free to add your experiences below...
    STEP ONE: Format the corrupt Hard Drive or replace with a fresh HDD
    *Link the two computers with a firewire.
    *If you're replacing your HDD, remove your corrupted hard drive from the 'broken' machine and insert a new one.
    *Power up the broken Mac whilst holding down the 'T' key. This will start it up in Target Mode and you'll get a nice firewire symbol floating around that machine's screen.
    *Power up the second 'healthy' Mac. This will be our 'donor' machine. When it starts up after a few seconds you will see the hard drive of the broken Mac appear on the donor Mac's desktop.
    *Using your donor Mac's 'Disc Utility', format the broken Mac's hard drive (now's the time to partition it etc. if you want to).
    STEP TWO: Clone your donor Mac
    Your broken Mac is no longer broken and now needs a new OS. But you don't have the discs, right? Well get this... you can clone your donor mac on to your machine, even if they are totally different i.e. a laptop on to a tower.
    *Again using Disc Utility, click on your donor Mac's hard drive. The restore tab appears as an option.
    *Click on restore and drag the donor Mac's hard drive that contains the operating system in to the Source box.
    *Drag the newly formatted hard drive on the broken Mac in to the Destination box.
    *Click restore. Your donor Mac's hard drive will now be 'cloned' on to your no-longer-broken Mac. Once this is done, eject the first Mac's hard drive from your donor Mac's desktop. You no longer need the donor Mac.
    Ta daa! Your machine now starts up happy and smily again. Time to restore all that stuff that's been sat on your Time Machine drive...
    STEP 3: Restore from Time Machine using Migration Assistant
    This is the really clever part that prompted me to write this piece in the first place. Time Machine IS accessible without those Leopard install discs you don't have. You need to use something called 'Migration Assistant'.
    *Start up your machine as normal and you'll see it is an exact clone of the donor machine. Weird huh?
    *Attach your Time Machine hard drive. It will show up as an icon on the desktop and because of it's size, you'll be asked if you want to use it as a Time Machine backup. Err, NO YOU DON'T! Click 'cancel'.
    *Open Migration Assistant (if you can't find it just type it in to Finder and click). There are three options, the middle one being to restore from TM or another disc. Yup, you want that one.
    *Migration Assistant will now ask you what you want to restore in stages, firstly User Accounts, then folders, Apps etc. It will even import internet settings
    And that's you done. Let Migration Assistant do it's thang... altogether I had about 140gb to restore, so it wasn't exactly speedy. This wasn't helped by the fact that my TM hard drive is connected via USB (yes, I know). Just leave it alone and it'll whirr happily away...
    Before I go - you don't have an option of when to restore from, and will restore from the last Time Machine save. At least then you should be able to access TM and go 'backwards' if you need to.
    Also - for a Mac expert, the above will be up there with 'Spot Goes To The Farm' in terms of complexity. However, for the rest of us the above is only available in fragments all over the net. By far the most common response to 'how do I restore from Time Machine without install discs' is 'you can't'. If I'd found the above information in one place I could have saved a lot of hair pulling and swearing over the last couple of days, so forgive me for sharing this workaround with the rest of the world. Meanwhile your expertise will come in very handy for the inevitable questions that will get posted below, so please feel free to help those people that won't be sure if this solution is the right one for them. I'm no expert, I just want to help people that were stuck in the same situation (and looking at the web, there's a LOT of them).
    Hope this is of use to someone, thanks and *good luck*!

    Most maintenance and repair, restore and install procedures require the use
    of the correct OS X install DVD; be it an original machine-specific restore/install
    disc set or a later retail non-specific general install disc set.
    By having an unsupported system, perhaps installed via an illegal download or
    other file-sharing scheme, where no retail official discs are involved and the
    initial upgrade was done by other means outside of the License Agreements,
    you are asking us to discuss a matter of illegal installation and use of a product.
    There are no legal complete OS X system download upgrades online; only bits
    that are update segments to a retail or as-shipped machine's original OS X install.
    +{Or an installation where a previous owner had correct retail upgrade discs, &+
    +chose to not include them with the re-sale of the computer it was installed in.}+
    However, to answer the initial question. To get and use an externally enclosed
    hard drive in suitable boot-capable housing, and get a free-running Clone
    Utility (download online; often a donation-ware product, runs free) you can
    make a bootable backup of everything in your computer to an external HDD.
    This is the way to make a complete backup to restore all functions to the computer.
    The Time Machine has some limits, in that it can restore only that which it saves.
    It does not make a bootable clone of your entire computer system with apps and
    your files, to an external drive device. A clone can. And some of the clone utility's
    settings can also backup changes to an external drive's system; if that other drive
    is attached to the computer correctly.
    Carbon Copy Cloner, from Bombich Software; and also SuperDuper, another of
    the most known software names you can download and use to clone boot-capable
    system backups of your computer's hard disk drive contents, are often cited.
    However you resolve the matter of the running OS X system in your computer,
    derived from what appears to be questionable means, is part of the initial issue.
    Since you do need to be able to fix an existing installation by unmounting the
    computer's hard disk drive and run the computer from the other (install disc or
    system clone) while it is Unmounted; and use the correct Disk Utility version to
    help diagnose and perhaps be able to fix it. You can't use a Tiger version Disk
    Utility to fix a Leopard installation, and so on.
    So, the situation and replies as far as they can go (since the matter does
    constitute an illegal system, if it was arrived at without correct discs) is a
    limited one. And file sharing of copied Mac OS X (and other) software is
    also considered illegal.
    And, one way to get odd malware and unusual stuff, is to get an unauthorized
    system upgrade from an illegal source online. You never know what's inside it.
    The other reply was not a personal attack; the matter is of legal status and as
    you have a product with a questionable system, the answer is to correct it.
    And if you want to save everything in your computer, make a clone to a suitable
    externally enclosed self-powered boot capable hard disk drive. With older PPC
    Macs, that would best be to one with FireWire and the Oxford-type control chips.
    However that works out...
    Good luck & happy computing!

  • How can I restore an old background on a mac?

    Today I created a collage on CollageIt Pro and made it my backround. Then when i restarted my computer, it was gone! How can i restore, or find the wallpaper i had before? (i do have a time machine back up but i could not find the picture). And it seems to be that the collage is nowhere to be found.

    Try Recent Items.
    Click your Apple menu icon . From the drop down menu click Recent Items
    Or, try searching using Spotlight. Click the Spotlight icon (magnifying glass) top right corner of your screen.
    Mac Basics: Spotlight

  • I am going to restore my Macbook Pro to it's factory condition. In iTunes I have renamed a lot of my songs. Last time I cleaned off my mac and restored my music I had to rename all those songs again. How do I get itunes to remember all of those names?

    I am going to restore my Macbook Pro to it's factory condition. I do this every once in a while because it seems to improve performance. I backup everything to an external drive and then I restore only what I want from my backup drive. In iTunes I have renamed a lot of my songs. Last time I cleaned off my mac and restored/reloaded my music I had to rename all those songs again. It took me about 2 weeks to reorganize my music. How do I get iTunes to remember all of those names and keep everything exactly the same when I restore/reload the music into iTunes?

    path21place wrote:
    I am going to restore my Macbook Pro to it's factory condition. I do this every once in a while because it seems to improve performance.
    It may seem like it does but it really doesn't.
    Just delete stuff you don't want.
    Last time I cleaned off my mac and restored/reloaded my music I had to rename all those songs again. It took me about 2 weeks to reorganize my music. How do I get iTunes to remember all of those names and keep everything exactly the same when I restore/reload the music into iTunes?
    Use Time Machine, backup everything, do the reinstall (I recommend you don't do it) then restore your user folder with Time Machine.

  • How can i restore my mac book pro computer

    how can i restore my mac book pro computer??an what am i doing b4 restore my computer??
    please remind me all the think i need to do,an i dont want to miss.
    thxxxx

    Welcome to the Apple Support Communities
    If you want to erase the disk, reinstall Mac OS X and your Mac didn't come with DVDs or you have OS X Mountain Lion or Lion:
    1. Press Command and R keys while your Mac is starting.
    2. Open Disk Utility, choose Macintosh HD in the sidebar and erase the drive.
    3. Install Mac OS X.
    If your Mac came with DVDs:
    1. Insert the OS X DVD that came with the Mac and press C key while your Mac is starting.
    2. Go to Utilities > Disk Utility, choose Macintosh HD in the sidebar and erase the drive.
    3. Install Mac OS X

  • How can i restore my mac book pro using a lacie time machine backup

    I just replaced the hard drive on my mac with a larger memory one. How do I restore my mac as it was previously from a time machine backup on a lacie external hard drive?

    Read about all the options that are available:
    http://pondini.org/OSX/Setup.html
    Ciao.

  • HOW CAN I RESTORE MY ITUNES BACKUP FROM MY MAC BOOK TO MY DESKTOP MAC?

    HOW CAN I RESTORE MY ITUNES IPHONE BACKUP FROM MY MAC BOOK TO MY DESKTOP MAC? THE REASON IS BECAUSE I HAVE TEXTFREE TEXT MESSAGES THAT I NEED FOR MY ATTORNEY AND WHEN I RESTORE IT FROM MY MACBOOK IT DOESNT INSTALL THE TEXTFREE BECAUSE I HAD DELETED ALL MY APPS IN ITUNES FROM IT. I HAVE ALL THE APPS ON MY DESKTOP MAC BUT I NEED TO KNOW HOW TO EXTRACT ONLY THE BACKUPS FROM THE MACBOOK AND IMPORT TO MY MAC DESKTOP. THE DESKTOP MAC IS THE ONE THAT HAS ALL OF MY LATEST BACKUPS. PLEASE SOMEONE HELP IF YOU KNOW THE ANSWER. THANKYOU

    Easy. Copy it from the old Mac to the new one.
    There are a variety of techniques including Setup Assistant (as soon as you get your new MacBook Air, it will ask you if you want to transfer information from another computer), Migration Assistant (if you elect to transfer information later), enabling file sharing between the two computers, or copying your music to a flash drive or other storage device followed by importing it to iTunes.
    iTunes: How to move your music from one computer to another
    Once your music library and everything else you want to transfer from the MacBook Pro resides on the new MBA, sync your iPod to the MBA. Sync the iPhone too when you get it, and they will both have identical iTunes music libraries.

  • Upgraded iPad 2 to iOS6 - asking me to connect to iTunes - when I do, my Mac is saying 'detected an iPad in recovery mode but need to upgrade iTunes to a newer version (our Mac too old to upgrade). How do I restore iPad so I can use it again?

    I upgraded my iPad 2 to iOS6 following a prompt from the application icon. 
    Once that was complete, my iPad asked me to connect to iTunes which I did.  iTunes then told me that it detected an iPad/iPod in recovery mode and I needed to have a newer version of iTunes to restore.
    I've tried before to upgrade to a new version of iTunes but was advised my Mac was unable to support this due to the Mac's age and old operating system.
    How, therefore, do I get back onto using my iPad 'cos at the moment, all I get when I switch it on is the 'connect to iTunes' symbols.
    Help please, I'm getting withdrawal symptoms!

    During a normal install of iOS 7.0.6 this does not happen but something clearly went wrong in your installation.
    To fix this, connect to iTunes and restore to Factory. Hopefully your iPad will be working again and you can restore your iCloud backup during Setup.

  • I used time machine to restore on a formatted MAC. Now the HDD space has reduced by 100GB but I cannot see any of the files. How do I find and delete those 100GB data from the HDD?

    I used time machine to restore on a formatted MAC. Now the HDD space has reduced by 100GB but I cannot see any of the files. How do I find and delete those 100GB data from the HDD?

    dglenn9000 wrote:
    I created a new user account just to see if it was my user Library or if there was something wrong with my system. And the new user account is doing most of the same things so I will need to do a full restore anyway.
    Not necessarily. I'd suggest downloading and installing the "combo" update. That's a combination (thus the clever name) of all the updates to Leopard since it was first released, so installing it should fix anything that's gone wrong since then, such as with one of the normal "point" updates. Info and download available at: http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate Be sure to do a +Repair Permissions+ via Disk Utility (in your Applications/Utilities folder) afterwards.

Maybe you are looking for