How to restore machine using a TM backup on a usb hard drive from older imac to a brand new iMac?

My imac (the one that had a superdrive in it), had a broken superdrive and was sent for repair. Whilst being "repaired" the screen was broken. I now have a brand new imac albeit without a dvd drive. My question is how to I restore my the old TM back up which had been made to an external usb hard drive to the new imac. Help files say that I should not restore from a TM file to a different machine and that I should use migration assistant. Whilst I can see the external usb drive in TM it is not being recognised in Migration assistant when I click on back up from a TM backup on another machine or disk.
Any ideas?
Just noticed that this new machine is running OSX 10.8.4  the broken imac was on mavericks

This is very simple first run Software Update on the new machine and get your machine upgraded to the most recent version of Mountain Lion 10.8.5. Install all other software updates Apple recommends in Software Update. Then care fully read Pondini's guide on using Migration Assistant located at:
http://pondini.org/OSX/MigrateLion.html
Your migrated data will be in a new account, to access it log into the new account.
Also DO NOT repeat DO NOTuse Wi-Fi to migrate data, if your TM backup drive uses USB, then connect it via USB and follow the on-screen instructions as described in Pondini's guide.

Similar Messages

  • HT201250 I use Time Machine to back up my entire computer with my external hard drive. I am getting a brand new iMac this month and was wondering what is the process of using this back up to restore my new computer exactly how my old computer was?

    I use Time Machine to back up my entire computer with my external hard drive. I am getting a brand new iMac this month and was wondering what is the process of using this back up to restore my new computer exactly how my old computer was? I want to make sure I will still have various important files on my new computer, like my songs in iTunes, my photos in iPhoto, etc, etc. Thanks so much in advance!

    Welcome to the Apple Support Communities
    When you turn on the new iMac for the first time, Setup Assistant will ask you to restore a backup, so connect the external disk and follow steps to restore all your files to your new iMac. Your new Mac will have the same settings and programs as your old computer.
    In other cases, I would recommend to restore the whole backup without using Migration Assistant or Setup Assistant, but a Late 2012 iMac uses a special OS X build, so the OS X version that you're using on your old Mac won't work on the new one. For more information, see > http://pondini.org/OSX/Home.html

  • External hard drive from older OSX not seen on new machine

    My new mac doesn't see the external hard drive when plugged in. The hard drive was formated with an earlier version of OSX. The older machine died, (and I took it apart ) - I hadn't been able to burn CDs of my images in time.
    Is this some sort of compatibility issue? Any suggestions on what to do will be greatly appreciated! Thanks!

    Welcome to Apple Discussions!
    It sounds possible to me that the drive is inside a hard drive case that needs an updated firmware to be able to mount on a newer operating system. This started to be a problem with 10.3. Here's my FAQ regarding the issue:
    http://www.macmaps.com/firewirebug2.html

  • How can I run a copy of photoshop elements from a hard drive from a broken laptop on my new imac

    The laptop had motherboard issues so have taken the hard drive out and am running it externally on a new iMac - if i try to run the program it says error code 6 and that i need to uninstall then reinstall the product but I bought it online so don't have a disc

    Install a downloaded version... you should be able to find it among the following links:
    PSE 10, 11 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
    PSE 7, 8, 9 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-7-8-9-downloads.html
    Check your Adobe account online for the serial number if you have not saved it anywhere locally.

  • How can I make a backup to an external hard drive from iPhoto if it won't open?

    how can I make a backup to an external hard drive from iPhoto if it won't open? I just wan't to make a backup to my pictures not my entire computer so how does Time Machine work on that?

      you could also clone the drive or volume, or just some of the user folders. look for carbon copy cloner, then enable the "use checksum to insure file integrity."
      you can have multiple iPhoto Library catalogues in different locations.
    Continue to use TimeMachine and make sure it has 350% or more capacity than your system and data.

  • I'm moving an internal hard drive from an old computer to a new computer.  How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer?

    I'm moving an internal hard drive from an old computer to a new computer.  (My new compute runs Windows 8.1) How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer?  Is this possible or do I have to use the procedure of copying the catalog along with the photos to a back up hard drive and then restore them on the new computer?

    The 'normal' procedure is to do a PSE organizer backup (not a copy or a backup from external tools) to an external drive, then a restore to the new location.
    The advantage is that you have a backup of both catalog and media files and you don't have all disconnected files, which would happen with external backup tools. Also, if you restore with a more recent elements version, the catalog will be automatically updated to the new format.
    The drawback in your situation is that you'll have either to overwrite all your files or restore to a custom location, creating a duplicate photo library (which supposes you have enough free space).
    It would be possible to simply use the organizer in the old PC to move the catalog to a new 'custom' folder just under your C: root drive. The catalog would be accessible once the drive will be installed in the new PC. Then you would have all files 'disconnected' due to the fact that all your media files are now on a drive with a different letter. Reconnecting a whole library is a hard job with PSE6, less so with PSE11/PSE12.
    If the idea of fiddling with the sqlite database with external sqlite manager tools is ok for you, I can describe the process more in detail. You only copy your catalog folder (as suggested above) to another location. Instead of trying the 'reconnection' way, you install the sqlite utility on the new computer. When the old drive is installed in the new computer, you simply edit a given record in the catalog database, catalog.psedb, and start the organizer with your copied catalog by simply double clicking the 'catalog.psedb' file.
    Even if the last solution is much, much quicker, I would still create a new PSE backup : you have never too much safety .

  • How do I remove one failing hard drive from raid set and replace with new one

    Last Friday apparently one of my raid drives started failing.
    As I mentioned on this forum I started getting continous beeping.
    I was finally able to get the raid working at a degraded level.  I ordered a replacement hard drive which is arriving today.
    (In the meantime I made twice daily backups of my work.....)
    Below was the message I got from the browser based raid software:
    Blahblah 09    1000.2GB   RaidSet Member SamSung HD103SJ
    Blahblah 10    1000.2GB     Free                 SamSung HD103SJ
    Blahblah 11    1000.2GB   RaidSet Member SamSung HD103SJ
    Blahblah 12    1000.2GB   RaidSet Member SamSung HD103SJ
    (See this earlier thread if you wish!)
    http://forums.adobe.com/thread/727867?tstart=0
    At one point when I did the checked the browser interface I saw the message Failed and Degraded
    As I said, I was able to work over the weekend on the degraded system.
    This morning I got the beeping again and did the rescue and now I am running a "full raid" without the notice that one raid was "Free".
    In any case, the new hard drive is arriving today.
    What steps should I take to incorporate the new drive into the raid system.
    I have one OS drive
    and 4 tb raid drives.   One needs to be replaced with the new one that I am getting today.
    Thanks
    Rowby

    Harm,
    Regarding your comment:
    Re: How do I remove one failing hard drive from raid set and replace with new one
    Please tell me how to read the serial number from an individual drive rather easily, without un-installing them:
    If you select the proper drive to change out, you only need to remove one drive and look at its serial number...
    Step 1: Identify bad drive serial number using Areca's tools
    Step 2: Turn off the computer
    Step 3: Remove what you think is the bad drive based on following your numbered cable method, marked hot-swap bays, whatever
    Step 4: Verify that the serial number matches the "bad drive" serial number from step 1; if it does great, proceed; if it does not match, go back to step 3
    Step 5: Change out the CORRECT drive - that's the bottom line for this whole procedure
    Cheers,
    Jim

  • How do you put your hard drive from an old computer to your new mac?

    how do you put your hard drive from an old computer to your new mac?
    i want to get the pictures, etc off of my old mac onto my new mac desktop. how can i do this?

    You don't.
    How to use Migration Assistant:
    http://support.apple.com/kb/HT4889?viewlocale=en_US
    http://support.apple.com/kb/HT4413?viewlocale=en_US
    http://support.apple.com/kb/TS1963
    Troubleshooting Firewire target disk mode:
    http://support.apple.com/kb/HT1661

  • Rescue and Recovery 4.3 on Win7 doesn't see a backup on external USB hard drive - Model W510

    I've run the Rescue and Recovery utility within Windows 7 on two different external USB hard drives thinking that maybe it was a usb drive issue.  When I open the R And R utility in expert mode I can see that both backups exist on their respective drives.  I planned on updating my hard drive so I made a full hd backup and the R&R startup disc to boot the laptop from.  The bios recognizes either external hard drive at boot with no problems.  It shows the names and "+" sign next to drives.  So I booted the drive at startup off the DVD drive with the R&R startup disc after I was sure that the bios recognized either external drives.  Then when I choose a "Full" restore is of course asks me if I want to use hd, cd/dvd, or external usb drive which I choose the later.  It then should show me the backup that I created earlier just as it did when I ran the utility from the Win7 environment so I can choose it to restore from.  But I get a blank box showing no backups when I run the 4.3 R&R Startup disc.  Again if I boot to Win7 and go into the R&R utility I can see the backup on the exact same USB external drive.  Then boot off the CD startup recovery disc and it shows NO BACKUP!  Help please!  I want to shelf my old hard drive "as is" and create the Restore onto the new hard drive but the utility isn't working for me.
    Thanks for any help.

    Hmmm,
    Seems like that _should_ work.  Here's a way you might be able to finesse it:  go to the advanced R&R menu in Win 7 and create rescue media on your USB drive.  It's essentially the same process as creating the CD - it makes the USB drive bootable and puts a copy of R&R there.
    There _should_ be an option to "preserve existing data" but be prepared to lose your existing backup and make it again.
    Then just boot the external USB drive and see if R&R recognizes a backup image on the same drive from which you booted.
    That's the way I usually migrate to new drives.  Maybe it will get around your mysterious problem.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • CPU is very hot when using Thunderbolt display and mac attached USB hard drive for TimeMachine

    Hello,
    i've bought the new MacBook Pro 15" and a Thunderbolt display. Everything works fine for me due to the latest updates, but i experience an issue which i really don't understand. When i connect an usb hard drive for TimeMachine to my display it works like expected (CPU has a temperature of 64°C), but when i connect it to an usb port of the mac while using my display the CPU temperature goes crazy (spikes about 80°C) and it gets very noisy. Has anyone else experienced this behaviour?
    May this has something to do with the dual graphics adapter and how the system handles the data stream to thunderbold ports and usb devices? Which graphics card is used for the external display, the internal gpu or the adapter from ati? I've googled a lot but haven't found appropriet answers about these questions.

    Hi there ulairi9!
    I understand how this would be a frustrating issue! I have an article here that can provide some troubleshooting steps for you, and can hopefully help you resolve the issue. That article specifically addresses the issue you are experiencing, and can be found here:
    AirPort Extreme and Time Capsule: External USB drive becomes inaccessible
    http://support.apple.com/kb/TS3271
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • I just bought a iMac G5   iSight from my school, how do I clean the hard drive and set it up as a new iMac, I just bought a iMac G5   iSight from my school, how do I clean the hard drive and set it up as a new iMac

    I just bought an iMac G5 with iSight. How do I wipe the hard drive and set it up as a new iMac

    Boot from your Mac OS X installer DVD.  After selecting a language, choose "Disk Utility" from the menu bar.
    When Disk Utility launches, use the "Zero Out Data" option under the Erase tab.  Erase the entire disk, not only the free space.
    One pass of zeros is secure enough for normal use.  One pass will take a couple of hours, so plan some time.
    Message was edited by: EZ Jim

  • How to access an Airport Express USB hard drive from a PC?

    I have a home network created by a new Airport Express base station (which replaced the previous AXBS that lasted 3 years and then died). Attached to its HSB port (with a USB hub) I have a WD USB disk and a Canon printer; I have another printer connected to one of the LAN ports. I have a mac attached to another of the LAN ports. Finally, my macbook connects to the network through the Airport. All peripheral items (disk, printers) work as they should from both macbook and the other mac.
    I also have a PC with WI-FI that connects to the internet through the AXBS. The printers seem to work on the PC (with Bonjour for Windows installed), and I can access its disk from the macs, but I cannot access the WD AXBS hard drive from the PC.
    The macbook and mac are running Snow Leopard and Leopard, respectively, and the PC is running XP SP2.
    Can someone offer a suggestion for getting disk access to work from the PC? Windows or not, it shouldn't be this difficult.

    Click here and follow the instructions, assuming you're using an AirPort Extreme base station. The AirPort Express base stations can't use USB hard and flash drives and will ignore any connected ones.
    (49618)

  • How do I restore all of my data to a newly installed hard drive from my time machine backup?  Thanks

    I had to replace my hard drive, I am new to restoring the data from the time machine.  Is there anywhere that the steps are clearly articulated as I am not that versed in this kind of stuff?  Thanks for responding.

    Here it is: http://www.apple.com/au/osx/recovery/
    As far as I'm concerned, the ONLY way to do this is to connect your macbook to your time capsule via Ethernet and restart it holding down the COMMAND-R keys.
    This will take you to a restore prompt which will boot from your time capsule. The restore will then be a complete and up to date version of your old hard disk.
    Don't even bother with older boot disks. I wished I got this advice from the many enquiries I made over two days! Restore took 2.5 hours.
    Only found out about command R by a random google search late at night. So anybody replacing their hard drive and restoring from a time machine backup - do this!

  • How to retrieve a backup of an external hard drive from time machine if there is a drive failure of the external HD?

    Hi,
    I have a time caspule that I use as my backup for Time machine.
    My itunes folder is on an external drive and When I do my backups, I connect my external to my mac so that my itunes folder will be backed up.
    When I do the back up, I know its backing up the external due to the size of the backup.
    but if my external were to fail, how do I retrieve the back up of the external? From what I can tell the drive has to be connected to the mac when connecting to time machine to access the back up files for the external. But if the drive is dead, how do I retrieve my files?

    budden10, please try this:
    Disconnect the external drive to simulate it not working or having failed
    Open Time Machine on your Mac and wait a few minutes for your backups to load fully
    Go back in time and select a date when you were backing up the external drive
    Now look at the Finder window and locate your Mac on the left side of the window under DEVICES
    Click on your Mac
    What do you see in the window there just to the right?

  • HT5096 How can I move my Time Capsule Backup to an External Hard Drive?

    Hi
    I have run out of space on my Time Capsule so have decided to change my backup drive to an external hard drive of 4TB. I moved the Sparse Disk Image Bundle from the Time Capsule to the new drive and then changed Time Machine preferences to use the new drive as my Time Machine location. Backups work fine but I am still getting Disk Full messages as it seems that the backups are limited to the original 494Gb disk image size.
    When I double click on the sparsebundle it mounts the Time Machine Backups Disk Image revealing the Backups.backudb folder but if try to drag that to the External Hard Drive I get the error message "The volume has the wrong case sensitivity for a backup."
    Any clues how I get this sorted
    Cheers
    Steve

    See Pondini's TM FAQs, for starters.

Maybe you are looking for