How to restore mails from removed account

Hello All,
Accidently I deleted two of my POP mail accounts in Mailboxes, then i noticed when i delete accounts, also all mails gone which no in any "on my mac" directory.
When I check /library/mail/mailboxes; which i create mail folders are exist but main sent items and inbox not there as [email protected]@mail.xxxxxx.com INBOX.mbox is empty.
Now how do i get back my main inbox messages?

Time machine or mobile me doesnt work for me. So no any backups
Note that MobileMe is not required for, or even used by, Time Machine. All you need to use Time Machine is an external drive with 2-3 times more free space than what you're trying to back up. If it doesn't work literally, you need to do some troubleshooting. If it simply doesn't work well with your workflow, then choose something else. You must have backups or you will eventually lose more than just a few e-mail messages. See my [Mac Backup Guide|http://www.reedcorner.net/thomas/guides/backups> for more information.
Anyway all gone i think.
Unfortunately, sounds like it. If there's anything critical, you could try a file recovery utility, but for that to work you would need to turn off the machine now (actually, yesterday would have been better) and don't touch it again until you have the software in-hand. And don't hope for too much, as there's never a guarantee when using such software.

Similar Messages

How to recover mail from deleted account?

Had some problems receiving mail from an account and the service provider suggested I recreate it and try again... In doing so I deleted the old account and have lost all of the messages in the old inbox and sent mail box. I cannot find anywhere where these might have been put and expect that they have disappeared but does anyone have any tips for finding and restoring them?
G5 Mac Mac OS X (10.4.8) Mail 2.1

It all depends on the type of account and how it was configured. For IMAP-type accounts, mail is stored on the server, and setting up the account again is all that’s needed to regain access to your mail.
If you deleted a POP account, however, then all your mail stored locally in that account’s mailboxes has certainly been wiped out, not just moved somewhere, and you were warned that this would happen by the following alert:
Remove Account
Are you sure you want to remove the <AccountType> account "<AccountName>"?
This will permanently delete the account setup information, mailboxes, and messages from your computer. Messages stored on the mail server will not be affected.
If the POP account was configured to leave mail on the server for some time instead of removing it right away when downloaded, incoming mail that’s still on the server can be re-downloaded by setting up the account again, just like for IMAP accounts, but keep in mind that this would only work for received (i.e. not sent) mail that has not yet been removed from the server.
If the messages are not on the server, and you don’t have a backup, your only option in the case of Mail 2.x is to try to salvage as many deleted *.emlx files as possible with a data recovery tool such as Data Rescue II, TechTool Pro, or FileSalvage (the files to be recovered would be different in the case of Mail 1.x). Of these, the only one I know for sure that can recover deleted *.emlx files is FileSalvage. Stop using your computer right now if you want to try that, as anything you do with the computer may cause the deleted files to be overwritten.

I need to remove my sons ipod and e-mail from my account how do I do it?

I need to remove my sons ipod and e-mail from my account how do I do it?

So, why do you think it is attached? Have you tried to set up a new Apple ID for him using his email address? Give it a go to see if you can. Once you have set it up, then that is what he would use to sign in to the iTunes Store on his iPod or when he was on the computer where your iTunes library is (or where his iTunes library is).
Here's the link to create a new Apple ID:
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleId?loca lang=en_US
Let me know how it works out or if you have other questions!
Cheers,
GB

TS3988 How can I verify my icloud account without being able to get mail from the account?

How do I verify my icloud account without being able to get mail from that account?

The verification email will be sent to your primary Apple ID email address.

How migrate all mail (boxes and accounts) from 10.6.8 on Mavericks (without Migration Assistant)?

How migrate all mail (boxes and accounts) from 10.6.8 on Mavericks (without Migration Assistant)? Install the system (10.9.1) on a blank disk, copied the program and set up manually. Mail accounts and folders does not work to install and configure. Migration Assistant does not want to use, as it copies everything, and you only need to e-mail. Read a lot, but nothing works.

Try reindexing the mailbox. This can take awhile if you have a lot of mail.
Reindex messages.
If that doesn't work try deleting MessageUidsAlreadyDownloaded3.
Quit the application.
You need to look in your user Library. Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Mail/V2/Mail Data/MessageUidsAlreadyDownloaded3. Move the file to your desktop.
Open the application and test. If it works okay, delete the file from the desktop.
If the application is the same, return thefile to where you got it from, overwriting the newer ones.
If you prefer to make your User library permanently visible, use the Terminal command found below.
Show User Library
You might want to bookmark the command. I had to use it again after I installed 10.8.5. I have also been informed that if you drag the user library to Finder it will remain visible.

How to migrate mails from Google Apps to MS Exchange Online IMAP (Getting error)

Any tips on How to migrate mails from Google Apps to MSOL? What is required? When I am trying to migrate using IMAP but getting fpollowing error
=======================
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:11
[email protected]
Failed
Error:
Failed to log on successfully for the following reason:
Server rejected Basic login with following message : * CAPABILITY IMAP4rev1 UNSELECT LITERAL+ IDLE NAMESPACE QUOTA ID XLIST CHILDREN X-GM-EXT-1 UIDPLUS COMPRESS=DEFLATE.
Exchange Management Shell command attempted:
'Microsoft.Exchange.Transporter.Provider.PopImap.InternetMailboxMeta' | Move-XsIMAPMailboxToExchangeOnline -AllowUnsecureConnection $false -TargetCredential 'System.Management.Automation.PSCredential' -MaxThreadCount '10' -Quiet
Elapsed Time: 00:00:11
======================
Any help will be much appreciated.
Regards
Sunil DK

I just finished migrating a client from Google Apps to Microsoft Exchange Online using the IMAP option in the Microsoft Online Services Migration Tool.
I added the mailboxes by creating a CSV file [i.e. GoogleApps(Gmail)_Mailboxes.csv] in the following format:
SourceIdentity,SourceServer,SourceLoginID,SourcePassword,TargetIdentity
[email protected],imap.gmail.com,[email protected],P@ssword1,[email protected]
[email protected],imap.gmail.com,[email protected],P@ssword2,[email protected]
[email protected],imap.gmail.com,[email protected],P@ssword3,[email protected]
Then I created a custom folder map XML file [i.e. GoogleApps(Gmail)_FolderMap.xml] to map the Google Apps (Gmail) labels to the appropriate Exchange (Outlook) mailbox folders and create those that didn't exist (i.e. Important, Starred, Follow up,
Misc, Priority) as sub-folders under the Inbox:
<?xml version="1.0" encoding="utf-8"?>
<FolderMappings xmlns="http://tempuri.org/FolderMap.xsd">



<Folder path = "INBOX">
<Property SpecialFolder = "Inbox"/>
</Folder>
<Folder path = "New Mail">
<Property SpecialFolder = "Inbox"/>
</Folder>
<Folder path = "[Root]">
<Property SpecialFolder = "Inbox"/>
</Folder>
<Folder path = "">
<Property SpecialFolder = "Inbox"/>
</Folder>
<Folder path = "Calendar">
<Property SpecialFolder = "Calendar"/>
</Folder>
<Folder path = "Tasks">
<Property Name = "Migration items/Tasks"/>
</Folder>
<Folder path = "Sent Items">
<Property SpecialFolder = "Sent Items"/>
</Folder>
<Folder path = "Sent Mail">
<Property SpecialFolder = "Sent Items"/>
</Folder>
<Folder path = "Sent">
<Property SpecialFolder = "Sent Items"/>
</Folder>
<Folder path = "Deleted Items">
<Property SpecialFolder = "Deleted Items"/>
</Folder>
<Folder path = "Trash">
<Property SpecialFolder = "Deleted Items"/>
</Folder>
<Folder path = "Drafts">
<Property SpecialFolder = "Drafts"/>
</Folder>
<Folder path = "Draft">
<Property SpecialFolder = "Drafts"/>
</Folder>
<Folder path = "Junk E-mail">
<Property SpecialFolder = "Junk E-mail"/>
</Folder>
<Folder path = "Spam">
<Property SpecialFolder = "Junk E-mail"/>
</Folder>
<Folder path = "Contacts">
<Property Name = "Migration Items/Contacts"/>
</Folder>
<Folder path = "Outbox">
<Property SpecialFolder = "Outbox"/>
</Folder>
<Folder path = "Journal">
<Property SpecialFolder = "Journal"/>
</Folder>
<Folder path = "Notes">
<Property SpecialFolder = "Notes"/>
</Folder>
<Folder path = "Public Folders">
<Property ExcludeFolder = "true"/>
</Folder>

<Folder path = "[Gmail]/All Mail">
<Property ExcludeFolder = "true"/>
</Folder>
<Folder path = "All Mail">
<Property ExcludeFolder = "true"/>
</Folder>
<Folder path = "[Gmail]/Drafts">
<Property SpecialFolder = "Drafts"/>
</Folder>
<Folder path = "[Gmail]/Important">
<Property Name = "Inbox/Important"/>
</Folder>
<Folder path = "[Gmail]/Sent Mail">
<Property SpecialFolder = "Sent Items"/>
</Folder>
<Folder path = "[Gmail]/Spam">
<Property SpecialFolder = "Junk E-mail"/>
</Folder>
<Folder path = "[Gmail]/Starred">
<Property Name = "Inbox/Starred"/>
</Folder>
<Folder path = "[Gmail]/Trash">
<Property SpecialFolder = "Deleted Items"/>
</Folder>

<Folder path = "Follow up">
<Property Name = "Inbox/Follow up"/>
</Folder>
<Folder path = "Misc">
<Property Name = "Inbox/Misc"/>
</Folder>
<Folder path = "Priority">
<Property Name = "Inbox/Priority"/>
</Folder>
</FolderMappings>
Additionally, I had to tell the Internet E-mail Mailbox Migration Wizard to use the "Individual Account Credentials" option since I was able to specify each account password in the CSV file when adding the mailboxes to Microsoft Online Services Migration
Tools console.
Just to note, the users had to manually export their contacts to a CSV file and calendars to iCal (ICS) files in order to import those items into Outlook.
I hope this will benefit others since Microsoft doesn't seem to have a custom, specifically defined migration strategy for this scenario. With Google Apps being in direct competition with BPOS/Office365, I assumed that Microsoft would have a simple
strategy using something like ActiveSync to facilitate the migration of email, contacts, calendar entries, etc. Hopefully we'll see something along those lines become available in a future release of the migration tools.
--Jon Payne

Does anyone know how to restore mail signatures in Mavericks?

Does anyone know how to restore mail signatures in Mavericks?

Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in earlier versions there is only one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Any idea how i restore my office email account, looks like i have moved all items to trash and now have no email account ! no time machine either

any idea how i restore my office email account, looks like i have moved all items to trash and now have no email account ! no time machine either

let's go back to your original post: what do you mean "it looks like you moved all items to trash"??
You DID move them to trash? (we can discuss WHY once we cure you)...
Can you open a window in finder and get to applications and then to utilities? Is MAIL in there?
And your "office email account"-- do you mean physical office, like place of work and you want that account in your mac mail on your computer? ~OR~ do you mean, microsoft office,mail account?
The difference is necessary to know...

Mail not receiving incoming mail from gmail account

I have an imac with 10.5 that has suddenly stopped accepting email in one of my gmail accounts, but still gets it from another. I synched my imac with my ibook earlier today. The ibook has the same problem accepts mail from the account that the imac doesn't etc.
Any help solving this problem would be greatly appreciated.
dc

Hi,
Did you select “Directory Management Service” option, if so, please make sure you configure the Central Administration application pool identity account to have the Create, delete, and manage user accounts right to the container that you specify in Active Directory.
Did you install Exchange server 2003 in your MOSS environment? If so, you should add an SMTP connector in Exchange Server, if you don’t know how to do that, you can post your issue into the following forum:
http://social.technet.microsoft.com/Forums/en-US/exchangesvrdeploy/threads
Also, please check whether your configuration meet the following requirements, If not, correct them and check the effect.
· The application pool account for Central Administration, the logon account for the Windows SharePoint Services Timer service, and the application pool accounts for your Web applications should have the correct permissions to the e-mail drop folder.
· The domain controller running Active Directory has a Mail Exchanger (MX) entry in DNS Manager for the mail server that you plan to use for incoming e-mail.
For more information about how to configure incoming e-mail settings, please refer to the following article:
Configure incoming e-mail settings
http://technet.microsoft.com/en-us/library/cc262947.aspx
Introduction to incoming e-mail
http://office.microsoft.com/en-us/sharepointtechnology/HA100823061033.aspx
Demo: Configure a SharePoint Server 2007 site to receive e-mail
http://office.microsoft.com/en-us/sharepointserver/HA102047921033.aspx?pid=CH101788401033
Enable and configure e-mail support for a list or library
http://office.microsoft.com/en-us/sharepointtechnology/HA100823071033.aspx?pid=CH101215271033
Rock Wang
Rock Wang– MSFT

How to stop Mail from selecting addresses from the list of Previous Recipients?

How to stop Mail from selecting addresses from the list of Previous Recipients?

This is a related question.
I deleted ALL my previous recipients and when I create a new e-mail it STILL is getting addresses that I don't want - they pop up and I don't know how to stop this!
I switched from one ISP to another - I deleted the old e-mail account in MAIL - I DID use the same name on the account - is that why it keeps bringing up the old address?
ARGH!

I frequently receive a notice from Mail that it "can't connect" to my yahoo mail account, despite the fact that I can receive mail from that account. The banner appears with my coded password highlighted and asks me to choose 'cancel' or 'ok'.

I frequently receive a notice from Mail that it 'can't connect' to my Yahoo account despite the fact that I am able to receive mail from that account. It appears with the name of my Yahoo account, my password (coded), and the choice to 'cancel' or 'ok'. If I click either, the banner goes away but comes back soon. I can open Mail and see that all accounts are online. I get the banner SEVERAL time during a session - very annoying!
I have several accounts, but this only happens with Yahoo and sometimes Hotmail. Can anyone tell me how to resolve this Mail issue?
Thanks.

I have 5 IMAP and 1 POP (Hotmail).
The Yahoo is IMAP.

Sending mail from alias accounts Sweden. iPhone.???????

Sending mail from alias accounts Sweden.
STILL cant send mail from my iPhone via one of my e-mail alias accounts???
sooo much time has gone by
so many updates to iPhone and my operating system
new iPhone on the way here and...
still cant send mail from my iPhone
yes i can set up another account through a third party
NO i dont want this. i expect to be able to use the mac mail i already have...
anyone know whats going on?
Have i missed apples solution to this.
anyone know how its done and...
please dont say sign up with someone else or create an account with someone else
For the record yes i can use my mail from my iPhone BUT BUT BUT it shows my ORIGINAL email account address BAD BAD BAD.
answer anyone!!!

I have to agree with you , I too was disappointed to see that with IOS 4 on my iphone I still cant send from an alias. This is a feature thats available with the .me web access so why not the iphone mail app? If they can't do it, then at least let me be able to use .me via safari on the iphone and ipad.
Joe
Message was edited by: Joe Tye

Batch deleting mail from an account

I'm frustrated when I get a few days of mail from my account on my iPhone and I have to mark each individual piece of e-mail one by one to set them up for deletion. Am I missing something? Is there a way to click on "Edit" in mail and then tell your phone you want to mark every e-mail for deletion? If I could do that, and then simply uncheck the few that I might want to keep around, it would be wonderful. This is such a simple thing that I would think the Mail program on the phone would have this feature. Perhaps I'm just missing how to do it.
There is a way to mark all your e-mails, but that's to flag them, not delete them.
Can anyone help?
Thanks.
Jeff Brody
Silverdale, WA

It wouldn't be easy to delete by accident if you had to affirm your choice through a dialog box. That just seems like something that should be part of the software.
Is there any way to request that something like this be added to the software? Is there a place in the support community where we can request such features?
Jeff

Retrieve mail from Gmail account with pop3???

I want to retrieve e-mail from my account on Gmail in my application, but I have a problem. I cant establishe a connection with pop3 server...
Do you have an example (full) in Java code for retrieving a mail from Gmail account.
I used the example from JavaMail Api 1,4 Specifications, but I have a problem with the parameters. (protocol null), and I dont know why...
Help me, please...

i hv retrived messages from gmail.but i m geting problem at the time ......
when i m reading mail which hava attachment.........
it is only showing attachment name...but not shoing the body part....
this is my programe........
plz any body help me its very urgent.........
give me a programe how to find the attachment name with body part........
//java msgshow -D -T pop3s -H pop.gmail.com -U user -P passwd
package MailServer;
import java.util.*;
import java.io.*;
import javax.mail.*;
import javax.mail.event.*;
import javax.mail.internet.*;
import javax.activation.*;
import java.util.Date ;
public class msgshow
static String protocol;
static String host = null;
static String user = null;
static String password = null;
static String mbox = null;
static String url = null;
static int port = -1;
static boolean verbose = false;
static boolean debug = false;
static boolean showStructure = false;
static boolean showMessage = false;
static boolean showAlert = false;
static boolean saveAttachments = false;
static int attnum = 1;
     static Message[] msgs = null;
     static String body = "";
     static String attachment = "";
     static String indentStr = " ";
static int level = 0;
static String from = "";
static String subject = "";
static Vector v ;
public Vector v1;
static Date date;
public Vector show()
          int msgnum = -1;
          int optind;
          InputStream msgStream = System.in;
          v = new Vector();
try
          // Get a Properties object
          Properties props = System.getProperties();
          // Get a Session object
          //debug = true;
          Session session = Session.getInstance(props, null);
          //session.setDebug(debug);
          // Get a Store object
          Store store = null;
          protocol = "pop3s";
          store = session.getStore(protocol);
               host = "imap.gmail.com";
               user = "techzain";
               password = "zain1234";
               // Connect
          store.connect(host,port, user, password);
               //System.out.println ("connected");
          // Open the Folder
          Folder folder = store.getDefaultFolder();
               mbox = "INBOX";
          folder = folder.getFolder(mbox);
               //System.out.println ("opened inbox");
          // try to open read/write and if that fails try read-only
          try
                    folder.open(Folder.READ_WRITE);
          catch (MessagingException ex)
                    folder.open(Folder.READ_ONLY);
          // Attributes & Flags for all messages ..
               msgs = folder.getMessages();
               //System.out.println (msgs.length);
               for(int x=0;x<1;x++)
               try
                    //System.out.println ("inside for");
                    Address[] addList=msgs[x].getFrom();
                         if(addList.length>0)
                              from=((InternetAddress)addList[0]).getAddress();
                         subject=msgs[x].getSubject();
                         //body=(String)msgs[x].getContent();
                    date=msgs[x].getSentDate();
                    //body=(String)msgs[x].getContent();
                         //msgs[x].setFlag(Flags.Flag.SEEN,true);
                         if(msgs[x].isMimeType("multipart/*"))
                              boolean bbb=msgs[x].isSet(Flags.Flag.SEEN);
                         System.out.println (bbb);
                              Multipart multipart=(Multipart)msgs[x].getContent();
                              for(int i=0,n=multipart.getCount();i<n;i++)
                              {Part part=multipart.getBodyPart(i);
                                   if(i==0)
                                   body=part.getContent().toString();
                                   else
                                   //body=(String)msgs[x].getContent();
                                   attachment=part.getFileName();
                         else
                              boolean bbb1=msgs[x].isSet(Flags.Flag.SEEN);
                         System.out.println (bbb1);
                              body=(String)msgs[x].getContent();
                         //System.out.println ("ok");
                         if(attachment==null)
                              try
                                   v.addElement(x);
                                   v.addElement(from);
                                   v.addElement(date);
                                   v.addElement(subject);
                                   v.addElement(body);
                                   //System.out.println (v.size());
                              System.out.println("********* mail "+x+" ***********");
                              System.out.println("From: "+from);
                              System.out.println("Date: "+date);
                              System.out.println("Sub: "+subject);
                              System.out.println("body: "+body);
                              System.out.println("Attachment: No attachments......");
                              System.out.println ("*******************************\n\n");
                         catch (Exception ex)
                              ex.printStackTrace();
                         else
                              try{
                              v.addElement(x);
                              v.addElement(from);
                              v.addElement(date);
                              v.addElement(subject);
                              v.addElement(body);
                              v.addElement(attachment);
                              System.out.println("********* mail "+x+" ***********");
                              System.out.println("From: "+from);
                              System.out.println("Date: "+date);
                              System.out.println("Sub: "+subject);
                              System.out.println("body: "+body);
                              System.out.println("Attachment: "+attachment.toString());
                              System.out.println ("*******************************\n\n");
                         catch(Exception ex1)
                              ex1.printStackTrace();
                         //     System.out.println (v.size());
               catch (Exception ex)
                    ex.printStackTrace();
          catch(Exception e)
               e.printStackTrace();
          System.out.println (v.size());
          return v;
     public static void main(String argv[])
     new msgshow().show();
          Flags flags = m.getFlags();
          StringBuffer sb = new StringBuffer();
          Flags.Flag[] sf = flags.getSystemFlags(); // get the system flags
          String s = "";
          for (int i = 0; i < sf.length; i++)
               if (sf[i] == Flags.Flag.SEEN)
                    s = "\\Seen";
                    System.out.println ("Seen Message");
*/

How to migrate mail from cabinets in GW 8.x to Gmail

Hi,
I've got a Groupwise 8.x email account and my only access is from a web browser. This account is being deactivated, and so I want to migrate all my email to my Gmail account. Through the settings of my Gmail account, I was able to IMPORT email from the Inbox of my Groupwise account. But, that step did not export any mail contained in my cabinets.
I found some help online that showed how to EXPORT mail from the cabinet folders, but you have to have the actual Email client to do this, and I only have access from my browser. I can export mail items one at a time, but since I have many email items, I figured that there has to be a better way.
Can anyone offer me some sugggestions and/or links to help?
Thank you in advance.
Scotty

In article <[email protected]>, Scotty81 wrote:
> I tried to install the full client on my PC. I was able to do so, but
> it didn't work.
Well it does require a little bit of configuration. "Little" things like
pointing it to the GroupWise server, which depending on the size of the
system may well be the same host name as used for webaccess, and the
default post office port is 1677. What tripped you up in connecting?
> So, I think your alternative of using a Thunderbird
> email account would be my next option. I don't have an account,
Well you do have an account that you are trying to get mail out of, that
is the account you would be using, selecting the IMAP option and
pointing it to the GroupWise server.
And you have an account you are trying to get your mail into, your GMail
account, that you'd also have to connect to via IMAP.
> Then the instructions for extracting the Novel email from the
> Thunderbird client?
Select all messages from a cabinet folder, Drag and drop them into
GMAIL. Rinse and repeat per folder.
Andy Konecny
Knowledge Partner (voluntary SysOp)
KonecnyConsulting.ca in Toronto
Andy's Profile: http://forums.novell.com/member.php?userid=75037

How to restore mails from removed account

Similar Messages

Maybe you are looking for