How to restore my MSI MegaStick 511 MP3 software??

Hi,
I accidentally formatted my MSI MegaStick 511. All the software inside are gone and now I can only use it as a normal storage pen drive and can't listen to MP3 nor radio station  . I have lost the MSI package/cover box as I was told there is a CD inside to restore back the MP3 software.
I really wish to have my Mp3 software installed back in my MI Megastick but I don't know the correct way to do so     . Can anyone help me on this?
Thank you very  much....
San San

Update the latest firmware(v3.0.6) and try again!!
Please do according to firmware update procedure of the following:
Mega stick firmware update process: (Don't put battery)
1. Please download and install the latest firmware and driver!!(http://www.msi.com.tw/program/products/ia/ia/pro_ia_detail.php?UID=607)
2. After firmware unzipping, it will show some files, please replace driver installation files (C:\Program Files\MSI\MS-5511)
3. Please press sustained “play key” first, then plug your mega stick 511 in your PC.
4. Please go to "start" (below left corner) and enter "programs" and choose "MSI MS-5511" update now!!!
5. As you update firmware that you must select "format data area" and after update success, you can release of your finger.
Please note: (1) Don't put battery with update firmware procedure. (2) The step 3 is very importantly, please must press sustained “play key” first, then connect to your PC.
Hope to solve your issue!!

Similar Messages

  • How to restore MAIL and ability to update software

    By accident, I erased all website data. Now no MAIL and no updates.

    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads. Recovery software usually provide trial versions that enable you to determine if the software would help before actually paying for it. Beyond this or if the drive has completely failed, then you would need to send the drive to a recovery service which is very expensive.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.
    Recover Files in The Trash
    If you simply put files in the Trash you can restore them by opening the Trash (left-click on the Trash icon) and drag the files from the Trash to your Desktop or other desired location.  OS X also provides a short-cut to undo the last item moved to the Trash -press COMMAND-Z.
    If you empty the Trash the files are gone. If a program does an immediate delete rather than moving files to the Trash, then the files are gone.  Recovery is possible but you must not allow any additional writes to the hard drive - shut it down. When files are deleted only the directory entries, not the files themselves, is modified. The space occupied by the files has been returned to the system as available for storage, but the files are still on the drive. Writing to the drive will then eventually overwrite the space once occupied by the deleted files in which case the files are lost permanently. Also if you save a file over an existing file of the same name, then the old file is overwritten and cannot be recovered.

  • How to restore apps after upgrading to IOS software

    I Upgraded to IOS software and no longer have apps displaying on my iPhone.

    The screen is black? No apps whatsoever?

  • I get a blue screen by just connecting my Megastick 511

    I have just bought MSI Megastick 511 256 Lite USB 2.0. I use Win XP Pro SP2.
    If I just connect the Megastick to the USB port I get bluescreens (for example
    IRQ LESS OR EQUAL) and after reseting the computer the same thing happened again.
    I tried formating the drive by starting the update utility and then while it was searching
    for the device I connected the stick.
    Even after this I can't connect the Stick to the USB port without crashing the whole system.
    I really hope that I don't have to run the update utility if I wan't to connect the stick.
     

    Quote from: Dr Stu on 12-November-05, 02:46:35
    well, try it on another system, see if the same thing happens. if so, then your Stick may be faulty...
    I have now been able to test it on another system wich also has Win XP.
    Result there was no such problem whatsoever on that system. I could both plug (both the MP3 switched on and off)
    and unplug it without going through the STOP routine via the icon shortcut and all this without crashing the system.
    On my system I get in most cases bluescreen with the message IRQL_LESS_OR_NOT_EQUAL when I plug it in. There has been one exception and then I had the stick switched of. If I just unplug it without first STOP it I always get bluescreen.
    But when I plug in it the sticj shows a computer logo and the text connected so it seems to intiallally communicate with the computer.
    I have tried USB port on both the Motherboard USB ports and USB ports on a separate PCI card wiith the same result.
    I wonder is a MP3 player just a USB memory device from the computers point of view? My experience with pure USB memory is that they are just to be plugged and unplugged without any software like the STOP utility. How does this MP3 player differs from other MP3 players regardinf how it's seen from the computer?

  • Problem MSI megastick 256: MEDIA ERROR

    hi
    my english is very bad because i am spanish
    i have a problem
    i turn on my pendrive and appear a message: "MEDIA ERROR" and then my MSI megastick turn OFF.
    i believe the problem is a fail when i was downloading mp3 files into the MSI
    then mi MSI... appear these message, and in my computer when i wanted to open the directory said me that the unity didn´t have format
    i did format the MSI and i lost all the files and now continue appeaing the message media error.
    I like to know how  and where can i find these files and downloading to the MSI... if these is the solution, or sombody say me the solution for my MSI...
    Thanks very much anda sorry my bad english and i hope you can help me

    Quote
    Exactamundo
    LOL, the word is 'Exactamente' (exactly), anyway it was very aproximate :D

  • How to restore audio in iOS 8 (beta 5) after requesting mic access?

    I posted this question over on StackOverflow before realizing that the AIR team might be working on a fix: http://stackoverflow.com/questions/25168882/air4-how-to-restore-audio-in-ios-8-beta-5-afte r-requesting-mic-access
    In a nutshell, requesting microphone input in iOS 8 will terminate all audio if it's done AFTER a sound has already been played, but not if it occurs before (sample code is in SO post).
    Apps were tested using an iPad 3 the Flex 4.6.0 SDK with AIR 4.0, and with AIR 14.0 - the same behaviour was exhibited.
    This poses serious problems for our apps, which are already released and being updated for iOS 8, so please let me know if this is a known issue, and if not, whether you're able to confirm from your side.
    Thanks!

    Yes, exactly the same flow on our side - interesting to know that it's FLV as well.
    My problem remains, though: in iOS 8, if I play a sound (via MP3, SWF, etc) and then check the mic, all further sound in the application stops indefinitely until I close/reopen the app. Since we need to record audio at various times in the app, this will cause a major problem for our users!
    I've added a bug in the hopes that someone can verify the problem: Bug#3801262 - Requesting microphone access in iOS 8 (beta 5) terminates all further audio
    Thanks!

  • How to restore "trash" elements?

    Hi.
    Since I accidentally moved several elements (mainly used in Microsoft office) to the trash, I was hoping that someone could tell me how to restore these files?
    Some of the elements I need to restore are crucial in order for me to run Microsoft office programs, so I really hope that it is possible to restore them.
    As a former windows user, I recall how it was to possible to restore elements in the trash. Furthermore these various elements would be restored at its original location, which is the key point of this issue. Since I dont remember where the elements originally was placed, I was hoping that the computer had a "restore to original location" function!?
    Regards

    Yes, I am aware that you can simply drag the file back to its original location, only there are approximately 30 different locations, so that "remove to original location" function would be somewhat easier;-)
    In regards to the names of the deleted files they range from; png, pdf, jpg, tif, thm, mp3, mp4, mpg, avi, wmv, etc. As mentioned I do not know the original location of the majority of the files and were talking about 2.200 elements, so it would be quite comprehensible to move them one by one. Is there not an easier way?
    @ neuroanatomist, where is these "put back" function located?? I'm not sure if I have the Mac OSX 10.6 though.
    Kind regards

  • How to restore old prefs, etc after clean reinstall of 10.3.9?

    Due to a fiasco with Drive Genius I was forced to reformat and reinstall 10.3.9. Luckly, I was bright enough to manually copy over the entire contents of the drive to a firewire drive before I started the drive genius project.
    I was able to find directions on how to restore my users which worked perfectly.
    I've copied all the apps back. But all the apps were in the main drive rather than in users, so the prefs, registrations etc are, I assume, stored in the old library.
    Is there a way to replace the new library with the original to avoid several days work digging out the original packaging to get the serial numbers for re-entering so I can get back to work right away?

    The serial #s, etc were in fact in the original main library. I was able to restore the use of all the programs by manually replacing the missing items in each folder in the library. It took over an hour, but I got it all back and saved me from having to rummage through storage boxes for the original documentation to retrieve and re-enter all the info.

  • N8: How to restore music store widget after hard r...

    Hi
    I lost all  nokia N8 widgets including Music store after I hard reset my N8.
    I have really been searching but have been unable to find a work around for this. I am unable to play any OVI music on my phone as it searched for a license and ends up saying that this is not my registered device.
    I really need some help.
    Nokia care has failed to solve my problewm so far.
    HELP!
    MODERATOR'S NOTE:  We have edited your post. Please refrain from posting irrelevant characters. Posting with a brief and concise concern would be enough to gather solution.

    I have been able to restore everything....except the Ovi Music Widget after a hardreset.
    This might help - 
    http://www.nokian8blog.info/2011/06/how-to-restore-ovi-music-unlimited.html

  • Dissapeared footer (where is written what page is loading and so on) how to restore it?

    Dissapeared footer (where is written what page is loading and so on) how to restore it?
    there is the screenshot ( http://j.imagehost.org/0213/Clipboard03.jpg )

    View > Statusbar = click it

  • How to restore a backup copy of 'My Music", from an external backup system

    Is there a document somewhere on the procedure to recover iTunes when you used a 3rd party backup system?
    Issue: I am having difficulty restoring my iTunes library from a third party backup system that mirrors all the files on my computer onto a remote disk drive. First I restored the files onto a new computer, then I loaded iTunes
    for windows, and then used authorize option. iTunes does not show any of my files, and appears to have erased the files I restored. I am lost what to do next, I can restore the files again if need be, just want to read some instructions instead of guessing.
    Background: My desktop computer gave me error messages when I rebooted my computer just after upgrading from iTunes 7.0.18 to iTunes 7.0.2. I got an error message that the operating systems SMS hive file is corrupt (a security file). After some investigation a technical person in my company tol me that the file is gone, on both my mirrored disk drives. Would appear that this is a serious iTunes bug or a serious hardware problem. Not knowing which, and confident I have a good backup, I have placed that computer on the side, and took a spare PC and started configuring it to be my new home computer.
    I loaded all the Windows patches and installed, recovered all the files under "My Documents", loaded iTunes, Authorized the computer, and don't see my files. When I go back to "My Music" subdirectory I see very few files, when I am in iTunes I don't see my music.
    The backup and restore was for all the files in "My Documents" kept on a remote server in my home, a Seagate Technology product called Mirra.
    Questions:
    1. How should I have restored those files? Apparently the method I choose does not work. All Apple FAQ information is based on me using the Apple Backup & Restore method, which I don't use, instead favoring using a single product to backup all my data.
    2. Are there other reports of microsoft Windows Hive or SMS files being damaged in the iTunes upgrade process? Any thoughts as to this being related to the iTunes upgrade process or digital rights management?

    First -- by default iTunes stores its Library in "My Documents\My Music\iTunes\iTunes Library.itl", and its Music in "My Documents\My Music\iTunes\iTunes Music\".
    Make sure you have a "iTunes Library.itl" after the restore -- if not, and your backup software supports it, try an older version of the file. If your backup software only keeps the last version of the file -- well, then you are SOL, and you will have to re-add the files to the Library. You will also have to rebuild your playlists, ratings, etc.
    Since you have "very few files" in the iTunes Music directory -- either you weren't storing your music there, or your backup didn't work. Are you sure you weren't using a non-default location for your music files?
    If you had a hardware problem then it is likely that your backup stopped working properly at some point. This is why you need a rotating backup scheme and periodic archiving of files to non-writeable media (If you have the time/money)

  • How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.

    How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.

    Check for Updates.
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%208/78d42b19fa42e8d83b5 5a65e1333373f_zpsf58bbe10.jpg

  • My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back.  It's the same for all icon and websites, does anyone know how to restore?

    My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back.  It's the same for all icon and websites, does anyone know how to restore?

    Wow!  I think I had this same issue just last night.
    I was cleaning my macbook pro retina on the outside.  Then I opened it up and was wiping dust off the monitor and I can't pinpoint exactly when, but the colors changed suddenly.  It looked super strange, it was like green halo's and it looked worse when looking at it at an angle.  Of course I took no pictures!!!  I was freaking out that my 2 grand laptop was busted and I somehow removed a protective film or something.
    But I digress...  The image looked very green and spacey, it was almost a neat effect.  After about 5 minutes it started to look a little more digital though.  There were straight lines of this halo effect on the edges and top.  After about 10 minutes it turned into a predominate issue with the blacks on screen.  I could open a web browser and it was unnoticable on a white background.  After about 15 minutes, you could only barely see the green cloud effect if you looked at the monitor from an extreme angle.  After about 20 minutes, it was completely back to normal, I almost feel paranoid like I see a halo or something strange.  But I believe that might be all in my head now.
    So yerp, lemme know what you guys figure out.

  • My old phone broke and I am having trouble figuring out how to restore my contacts on my "new" phone (LG ENV2 Black)...

    My old phone broke and I am having trouble figuring out how to restore my contacts on my "new" phone (LG ENV2 Black).  Apparently the phone is so old that I am unable to install Backup Assistant on it, which sucks.  I have all my old contacts saved on my computer as a CSV and also another copy on a micro SD as VCF.  I have tried moving the CSV from my computer to my ENV2 via both Bluetooth and USB cable, but had no luck with either of those.  I also tried to pop the micro SD into the ENV2, and although I can load all my old pictures/videos/etc. from the micro SD, I do not seem to be able to restore the contacts from card.  I know there has to be some way to manually transfer these files; the contacts are still on my old phone as well; but I was unable to use the transfer wizard for that because my old phonedoesn't seem to be supported by that (Pantech Jester 2)

    Google a program called bitpim, that might do what you want.  Never used it but it's been talked about on the forums.  Other than that you might have to input them manually.  Mary

  • Any ideas about how to restore old appearance on my iPhone?  I just updated to IOS7 and really dislike the new appearance. I have to log on to see percentage of power used since I can't see it on my opening screen. I also want the gray folders back.

    I just updated to ios7 and do not like the redesign. I want the old design back. Has anyone found out how to restore the old appearance. I do not understand why the change. I now have to unlock my phone to be able to check my battery level because my screensaver has a light color in the upper corner and I can't read the text. I want the gray panel back.

    See Recover your iTunes library from your iPod or iOS device.
    tt2

Maybe you are looking for

  • How can I print a PKPASS file on a windows computer ??

    How can I print a PKPASS file on a windows computer ??

  • Apex 3.1's main page can't show up in Oracle 10.1.0.1 EE for windows.

    I first use the apexins.sql script to install apex, then use the apexexpwd.sql to change password of the admin account, after that I verified apex is successfully installed.But when I point IE to http://localhost:8080/apex, a windows User/password pr

  • OIM 11gR2 - Self Registration Locale and Timezone

    Hi, I would like to prepopulate locale (usr_locale) and timezone (usr_timezone) when a user registers using self registration. I created a PrePopulationAdapter, updated SelfCreateUserDataset.xml in MDS, registered the plugin containing the adapter, r

  • SO PR mulitple POs (third party)

    Hi there, Hoping someone has encountered this problem and has some thoughts.... Create SO (third party) (ie, Qty 10 of xxxx) Create PR (automatically) Create PO (for Qty 5) Unable to create ANOTHER PO for remaining Qty 5. A message appears stating th

  • Lightroom 3.4.1 looses video thumbnails - Mac OS Lion

    I remember this having been brought up sometime ago (and happily sank into oblivion), and certainly not specific to OSX Lion (had it all the way before), - Lightroom is prone to loose video thumbnails in the Grid view at random, i.e some are preserve