How to restore my old hard drive into a new hard drive using my time machin

My HD in my Mac Book died. Thank to the apple care Apple change it to me.
Now I have a new HD with nothing on it.
How do I use the backup in the Time Machine to restore my old hard drive?
As far as what I knew I am supposed to have all my old data, applications, and more by doing something with Time Machine.
Thanks

hi,
i have been through this. First if apple techs replaced the drive you do have something on the drive. your internal drive can boot the machine although your user settings, network settings and third-party software applications are net set up.
here's what you do.. connect the time macine drive and turn it on. now boot your macbook. watch the 'welcome movie' and don't panic. you will recieve setup instructions from the macbook. you will of course designate the system language to be english. Now an option screen will appear. there are options for setting up the new computer include using a firewire cable and transfering stuff from another macbook. ignore that option. you will see an option to restore settings from a time machine drive. bingo! choose that.
get the transfer started and go away. usb restoration of big internal harddrives by time machine is **** slow. (it should be slow for alot of technical reasons. don't blame apple.)
make sure you have the macbook plugged into an electrical outlet, not running off battery because this can be an overnight process.
so now you're good to go

Similar Messages

Recently installed a 1TB hitachi travelstar hard drive into my Macbook 10.6.8 however Time Machine says not configured hence cannot back anything up

Recently installed a 1TB Hitachi travelstar hard drive into my Macbook (13inch mid 2010) OS X 10.6.8 .
However now having problems with configuring , latest issue my Time Machine says Not Configured hence cannot back up using this device !
Can anyone help ?

You installed the new hdd with new install of Mac OS .. or did you recover your old TM setup??
If TM cannot locate the Time Capsule .. is it visible in airport utility or finder??
Are you even using a TC?? If you are using an external drive you need to spell it all out.
Time Machine may not recognise the old backup.. you can usually inherit the old one.
See B5 and B6 here.
http://pondini.org/TM/Troubleshooting.html
Otherwise use A4.. delete the existing TM setup and reconfigure it from scratch. If you do that TM should discover and reuse the old backups if possible.. but a new hard disk might not be possible it may need to start over.

How to move an old iTunes folder into a new user account?

Hi there, so I have a 98Gb iTunes library and it was sitting on an older version of an iMac (2006 OSX 10.6.8 iTunes 11.4). Realised it would be cumbersome to transfer to my newer iMac (2014 - OSX 10.9.5 iTunes 12.1.2.27) so I used the migration assistant to transfer everything across. Only problem is now I have 2 user accounts for myself on the new iMac and all I want to do is consolidate my iTunes library into one, but am struggling to move the iTunes folder directly into the newer user account on the new iMac. I keep getting a "you do not have permission to move this". I've tried both passwords to each account but still it won't move the folder. Any suggestions or directions would be greatly appreciated.

SlippySlope wrote:
Were you saying that you have two user accounts (one one the old Mac and one on the new Mac) or two Apple IDs with your music?
Read the original post. The user used Migration Assistant to copy files from an old computer to a new one. This creates a new computer account with the old content. The user then had two accounts on the new computer with content the user wished to merge.

How to reinstall Mountain Lion after Mavericks OS has been installed without using the time machine?

Hi, I upgraded to Maverics a few weeks ago, and since than my computer has been very slow. It NEVER happened before. Now, I want to go back to Mountain Lion, but I didn't back up my computer with the time machine. I'd appreciate if anyone could tell me how to reinstall Mountain Lion again over Maverics? Thanks a lot for your help!

You will need either a bootable flash drive with Mountain Lion to install, if you have one, or reinstall Snow Leopard if your computer can boot Snow Leopard. Or you can use Internet Recovery to reinstall the original version of OS X that came with the computer. In any event you will have to repartition and reformat the drive.
Install Mavericks, Lion/Mountain Lion on a New HDD/SDD
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

How to restore a user home account to a new hard drive

I had a hard drive go out and before it did, I have a copy of my user directory on a firewire drive. I got a new hd and am ready to move the back up over to the new drive.
Is there any steps I should follow to do such? Will a simple copy of the total user account over to the new drive work ok if I create the exact name of the backup home directory to the new drive and say "replace"? I want to make sure my mail, docs and music directories are correct. I have the apps backed up but can reinstall them if need be and not to mes with the libraries.
Thanks
jf

Boot the machine with your install disk, select your language, and, when the menu bar pops up, select Utilities/Disk Utility, select the new HD, select erase and format/partition (as desired) Mac OS Extended and install OS 9 drivers if the machine supports OS 9 booting (not shown in your configuration information), under security options select zero out data. Once the drive is formatted, install Tiger. After the machine restarts, go through the welcome dialogs and use the same name, shortname, and password you used originally. After that finishes, simply mount the FWHD and you should be able to just drag and drop everything from the backed up users folder to the new one. Don't drag the users folder, just the subfolders.
Once you've successfully restored everything, then use something like Carbon Copy Cloner, SuperDuper!, etc. to make a bootable backup onto the FWHD. That way, you can always reverse the procedure whenever the HD goes south again.

External hard drive to use with Time Machine? Thoughts? Mac newbie.

Hello. Switched to an imac and have loved the experience. Was just about to buy an external hard drive when apple announced the time capsule. I've been holding off thinking I would purchase one but now I'm re-thinking it.
Between music, videos and pictures, I currently have about 400gb of stuff (and it will grow). My main concern is backing up (archiving) a copy of these files. Backing up other system files is a second concern after that.
I'm thinking of buying a 1TB external hard drive, firewire capable, partitioning part of it to be an archive drive, and the other part to use with time machine. Skip the time capsule.
Will that work? Other recommendations?
If so, any recommendations on a quiet, reasonably sized (i.e. doesn't take up the entire corner of the desk), 1tb external hard drive?
Thanks.

Clayton, if you're only backing up one Mac, then you can purchase any good, reputable 750 GB or 1 TB external drive.
Considerations:
1) Reliability is key here. You want a drive that works. Various people have complained about Western Digital (me included), so take that into consideration.
2) Quiet is important. You have a quiet computer -- why louse up the working environment with a noisy drive?
3) FW (Firewire) 800 is faster than FW400, which is faster than USB. But once you get the initial backup done, it really doesn't matter how fast the drive is, because it works in the background and doesn't hamper your work. And if you DO need to restore your entire computer via Time Machine (I've done it), speed is less important than reliability. Even if it takes 3 hours, you'll be grateful. So while some may counsel you to get a 'fast' drive, reliability is more important.
4) On FW versus USB, you'll hear many claims. Again the key is reliability versus speed. A good USB drive is fine for what you are doing; FW is faster. Some folks have had problems with one or the other, so hear what they have to say.
5) Every drive dies. That's true for any electromechanical device. Don't think you've solved your backup problems by plugging in a drive and walking away. Your most critical files need a second backup, be it to a DVD, CD, thumb drive, network drive -- something. The more critical it is, the more backups you need. If you're writing your Ph.D. thesis, by definition you can't have too many backups
6) Convenience matters. You can 'roll your own' drive if you have experience -- buy a case, buy a drive, assemble, etc. But it's many times easier, particularly for a Time Machine backup drive, to just buy a reliable (there's that word again) external HD off the shelf.
7) Finally, follow directions. Apple tells you how to set up a TM drive. Do it their way. That means, format the brand new drive and make it a 'GUID' partition. Use the Apple Disk Utility. Follow directions.
Good luck,
Steve

Down loaded Mavericks, will not install on my computer because it says "this hard drive is used for time machine back up".

Down loaded mavericks, it will not install on my computer because it says" this hard drive is used for time machine back up". So I used my old computer hard drive for back up and reloaded the program but it still says the first hard drive is being used.

Welcome to Apple Support Communities
Make sure you have selected your MacBook Pro's hard drive as the destination to install Mavericks. If so, you have the "Backups.backupdb" folder in the root level of your hard drive.
That's the folder used by Time Machine to store backups of your files, and the Mavericks installer understands that your internal hard disk is the Time Machine drive.
To fix this, open a Finder window, select the Go menu (on the menu bar) > Go to Folder, and type:
Then, delete "Backups.backupdb", empty the Trash and run the Mavericks installer. Finally, install OS X Mavericks

Quiet external hard drive for use with Time Machine?

Few questions related to Time Machine:
1- what external hard drive that would be good to use with Time Machine, that also runs relatively quietly? Since TM runs 24/7, am looking for one that is quieter than my current G-tech.
2- Please confirm what size is optimal relative to the size of the internal hard drive.
3- I currently use a separate external hard drive as my bootable disc. Is it possible/preferable to have these be on one and the same drive?
Thank you.

1. I like these (have three of them) - literally whisper quiet:
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
2. You should allow 2 - 3 times your internal drive's size for TM.
3. No, it'd be best to be on another drive - you can create separate partitions, but if/when the drive fails, both of your backups would be gone. So, keep your clone on a separate disk. In fact, it's good to have two different backups.

I cannot load Maverick on my iMac HD. It reports that my HD is used for Time Machine backups and will not load to that drive. I do not use this drive for backups. Help.

I cannot load Maverick on my iMac HD. It reports that my HD is used for Time Machine backups and will not load to that drive. I do not use this drive for backups. I use an external 1 TB WD My Book for backups as well as Super Duper Backups. Can anyone offer advice. Thanks.

Welcome to Apple Support Communities
You have got the "Backups.backupdb" folder in the root level of your hard drive. This is the folder used by Time Machine to save backups to, and the OS X Mavericks installer thought that your hard drive is being used to store Time Machine backups
To fix this, open a Finder window, select the Go menu (on the menu bar) > Go to Folder, and type:
Then, delete "Backups.backupdb" and empty the Trash. Finally, open the Mavericks installer from the Applications folder and follow the steps

My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years

My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years and I can't recall how.

If you had stored your catalog files on an external drive, then all you have to do is double-click on them to open them and use them.
Or you could move them to the internal drive and double-click on them once the move is completed.
To create a single catalog file from multiple ones, you could use File->Import from Another Catalog

Can I turn my soon to be old Apple TV into a wireless hard drive???

Can I turn my soon to be old Apple TV into a wireless hard drive???

Exactly. That's my question? There's a 40gb hard drive about to be tossed if I were to purchase the new Apple TV. I assume there are features the new one will have that old does not...?
Either way still a good question because there is a 40gb hard drive that has just been sitting there unused. It would nice if it could be used as a data storage device.
Currently I just stream content thru the Apple TV or rent movies directly from the ATV (not at the computer and then wait for them to transfer to the hard drive)

Can I turn my soon to be old Apple TV into a wireless hard drive like TC???

Can I turn my soon to be old Apple TV into a wireless hard drive like the TC???

Exactly. That's my question? There's a 40gb hard drive about to be tossed if I were to purchase the new Apple TV. I assume there are features the new one will have that old does not...?
Either way still a good question because there is a 40gb hard drive that has just been sitting there unused. It would nice if it could be used as a data storage device.
Currently I just stream content thru the Apple TV or rent movies directly from the ATV (not at the computer and then wait for them to transfer to the hard drive)

Just bought a new MacBook Pro. Would like to transfer my Waves plugins from My old Hard Drive into my new MBP. IS there s simple way to do this?

Just bought a new MacBook Pro. Would like to transfer my Waves plugins from My old Hard Drive into my new MBP. Is there a simple way to do this?

Hi
The easiest and most reliable way would be to download the installer from Waves and re-install.
CCT

Need easiest way to transfer my old hard drive into a new purchased one

I recently upgraded my 80GB internal HD with a 120GB. I just need to transfer everything I have onto my new one. Mac certified stores charge around 95$/hour so no way am I going to do that. However, I'm not really knowledgeable when it comes to backing up/cloning HD. My friend has a 160GB Western Digital external so I plan on using that. I downloaded Carbon Copy Cloner but got confused when it asked me what kind of drive I wanted it (ex: read only). I heard TimeMachine can copy your whole hard drive also?

Kyle Kim wrote:
sorry for sounding stupid, but what's an "enclosure?" All I have is my friends 160GB Western Digital external HD
An enclosure is a box that allows a drive to communicate via the USB and/or FireWire interface. The external drive you mentioned is just an "enclosure" around a commodity hard drive. I did read that you said you had access to an external hard drive, but I just sort of buzzed it with what I remember from the top of my head. That being said, let me revise (this is how I actually did it when I installed my Hitachi Travelstar 7K200):
1) Run Disk Utility from your current drive, and format your new external drive(GUID Partition Map).
2) Install Carbon Copy Cloner on your current drive. Clone your current drive to the external drive.
3) Shut down and try and boot from the external drive (hold option during power up?). Verify it can boot.
4) Take the original drive from the MacBook and replace it with the new drive.
5) Boot up from the external drive.
6) Run Disk Utility and format your new internal drive in GUID Partition Map.
7) Clone the contents of your external drive to your new internal drive, then shut down.
8) Start up your machine and make sure it boots from your new internal drive.
9) Wait while Spotlight reindexes the new drive. It'll be loud while the CPU heats up and the fan cranks up.
If you're using an external drive, you'll need to perform the cloning process twice.

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

How to restore my old hard drive into a new hard drive using my time machin

Similar Messages

Maybe you are looking for