How to restore picture after saving changes ?

Is there any chance to restore a picture I already saved cropping? Time machine wasn't setup.

If you did it in Preview, did you try 'Revert Document...'?
Ciao.

Similar Messages

  • I just bought a macbook pro and I want to know how to restore pictures that were backed up on iCloud but then deleted from my phone. Isn't that the point of the backup so I can delete and make more space. Please help!

    I just bought a macbook pro and I want to know how to restore pictures that were backed up on iCloud but then deleted from my phone. Isn't that the point of the backup so I can delete and make more space. Please help!

    Log into the iCloud on your MacBook Pro and enable Photo Stream:
    Then launch iPhoto and set iPhoto's Photo Stream preferences to the following:
    Then check the Photo Stream section of iPhoto:
    This is to confirm that the photos are still in Photo Stream. If they are they will be imported into the library. 
    NOTE: not all photos in an iPhone will be in the Photo Stream. PS only keeps photos in it for 30 days.
    If you have the missing photos in your library put them in an album.  Connect your iPhone to the Mac and open iTunes.  In iTunes you can select that album in the library and sync the photos to your iPhone to get them back on the iPhone.
    OT

  • How to restore 5c after lost passcode

    how to restore 5c after lost passcode?

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • Why can't I save a picture after I change the resolution in CS5, I could before.

    Why am I unable to save a picture one I change the resolution? I know that I am doing it correctly I have done this thousands of times and all of a sudden it doesn't work. Pictures will save if I make other adjustments i.e. crop, erase...etc. The changes are made while the picture is open in photoshop I see the resolution changing but when I save it simply does not. Beyond FRUSTRATED PLEASE HELP! AS ADOBE WON'T HELP ME SINCE CS6 has been released I was told if I want help buy CS6.

    Have you tried closing the Photos app completely and seeing if the pictures save to the camera roll/saved photos album after you re-open the app ? From the home screen (i.e. not with Photos 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Photos app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset and see if it works after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • "Rendering: settings changed" after saving changes from Bridge

    I have LR 2.6 on my Mac.  I import RAW images through LR, let LR build 1:1 previews.  Once the import has finished & previews are built, LR moves from image to image fine.  I then do my basic edits, deletions, and do a batch renumber.
    Next I go to Bridge to make my adjustments in the RAW window without opening the files.  I go back to LR, save the changes, allowing the Bridge changes to overwrite the LR development import presets in the xmp files.
    It usually takes LR a while to save all the changes, but eventually it does it.  However, here is my issue.  No matter how much time I give LR to render new previews, I don't think it does, at least not until I go to Library mode double click an image to view larger (to fit the window).  When I go from image to image, it takes a few seconds while displaying the message "Rendering: settings changed..."  Now, this is not necessarily right after I save the changes, but it still happens weeks later- whenever I go to view those images.  Does LR not automatically re-render the previews after development changes have been made and saved to LR?
    And if not, how would I force LR to do it for that catalog, or for all my images?
    Thanks,
    R

    Robert Ripps wrote:
    A fair question- one, when I have tried, LR is way slower on my Mac G5 than doing it in Bridge, which is slow itself.  I just launched LR, had an open folder with 303 images in it which I had already rendered previews of, then clicked on Develop module- it took 13 seconds to go to that module & finish "loading".  Yes, a new commuter would solve many problems <g>, but until then....
    What you  may need is more RAM. Or do you have other applications working in the background 13 seconds to build a preview!!!!! Using a old Macbook with 1.2 GB RAM an it does it faster than that!LR doesn't require a lot of power from a machine...it does need as much RAM as you can stick in a machine and the fastest disks you can use...but if it is taking 13 seconds to build a single preview then it isn't really worth using IMO
    Why not make all you RAW adjustments in Lightroom Develop module. The raw processing engine is the same as ACR and you can choose "auto save changes to xmp" in the preferences.
    Ah, bingo.  That works, abet slowly (see above).  Okay, I will just have to remember to manually do that once I save changes to LR from xmp data.  I guess I thought LR would be smart enugh to do that itself, but I guess not.  And again, I find it faster to go back & forths, even with an extra step.
    LR can be set to automatically write any changes to xmp, it doesn't have to be done manually (set this in preferences) you just have the choice. It won't read changes made in other applications automatically as this would be a very bad idea..it would after all over write the LR database. So if you do want to over write the LR database you must activly choose to do so.
     .

  • How to restore photos after i tried to delete them, they are still there

    I tried to delete some photos to give me room on my start up disc. First I tried saving them to a thumb drive then tried deleting the pix. The photos come up blank but I still see them sometimes. how do I restore them completely.
    part 2 what is the best way to store them off the hard drive?

    assuming that you deleted them in iPhoto to totally remove them empty the iPhoto trash and then the system trash
    to move your entire iPhoto library to an external drive
    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    How to restore them - if you deleted tehm in iPhoto open the iPhoto trash and right click on them and restore to library
    LN

  • How to restore apps after update

    I have an IPad2 with 4.3.5 and due to some of the newer apps I was forced to upgrade to the newer 6.1.3
    before i updated the IOS i backed up with the itune to my laptop. 
    i than installed the new ISO, when it is finished it acted as it is a new IPad there were none of my old apps.  my pics did move over.
    I than clicked on restore under the backups and it took about 8mins and when it finished  I still had nothing on my Ipad??
    is there is a way to restore my old apps or i have to redownload everything due to the newer IOS?
    thanks

    Is this how you restore from iTune Backup?
    1. Settings>General>Reset>Erase all content and settings
    2. You'll be asked twice to confirm
    3. You'll see Apple logo and progress bar
    4. You'll see a big iPad logo on screen
    5. Configuration start
    6. Set language
    7. Set country
    8. Select Network and input Password>Join
    9. Enable Location Service>Next
    10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
    11. Select Restore from iTune Backup
    12. You will see picture of USB cable pointing towards iPad
    13. Connect iPad to iTune (make sure iTune is on standby)
    14. Tap Continue (computer)
    15. Restore iPad from Backup (computer)
    16. See progress bar with estimated time (computer)
    17. See Restore in Progress on iPad
    18. See Apple logo
    19. See Apple and Progress Bar
    20. Slide to Unlock
    21. Copying Apps back to iPad (computer)
    22. You'll see Loading/Installing/Waiting below the Apps (iPad)
    23. Sync Music/Podcast/Movies to iPad (computer)
    24. Sync completed (computer)

  • How to store tones after saving ring tone maker

    Hi, Pls let me know how to store the tones after saving in ringtone maker.
    Thanks.

    There should be a video on how to do that after you've created the ringtone.  I know for sure you will need to sync with iTunes.

  • How to restore documents after a clean install when location is not known?

    I have had some troubles with my computer recently and the person at the genius bar said I should wipe my drive clean and include everything except my library folders and system folder. The only thing I don't know how to restore is documents that aren't stored in a known location in the finder. What I mean is programs like LittleSnapper or Macjournal that have their files contained with the application (in another words I don't go to the Finder to save or open these documents.)
    I did a search for some files from "Things" and it looks like these get stored under the library. Therefore if I choose to not restore the library (like the Genius said) wouldn't I lose access to these files?! LittleSnapper appears to save it's files in a hidden folder on the hard drive called "private". How can I restore that folder if I don't even have access to it?
    Do I just export the files from these programs to the finder and then reimport them later? "Things" doesn't even appear to have a way to export it's files that I know of.
    Thanks in advance for any help you can provide in this matter.

    "No program keeps stuff in the private folder."
    The reason I thought that is if you open a LittleSnapper screen shot in Photoshop or where ever and then command click on the windows title it shows the private folder on the file's path.
    "Before you do reformat, try creating a new user account. See if you're problem still exist within that new user."
    Yes I still have the problem with the new user account.

  • How to restore pictures from iphone 4 without backup, how to restore pictures from iphone 4 without backup

    hi,existing i'm using Iphone 3.i hv forgotten that i use the my laptop to plug before. then when i plug in my iphone 4 the use name detect with Ipone 3 user name. then it start to syn ...at the end i lost my photo in my iphone 4 without backup. can u show me how to restore my photo pls. appreacite for your help!

    Photos in the Camera Roll can and should be imported by your computer as with any other digital camera.
    When connecting a new iPhone with iTunes that was/is used for syncing with another iPhone, you are prompted to transfer the backup for the other iPhone or set up the iPhone as a new iPhone. Photos/videos in the Camera Roll are included with the iPhone's backup and you chose to transfer the backup for your iPhone 3G to your iPhone 4 which replaced the Camera Roll comtents on your iPhone 4 with the Camera Roll contents on your 3G or that are incuded with the backup for your 3G. Had you selected to set up your iPhone 4 as a new iPhone instead, the Camera Roll contents that were on your iPhone 4 would not have been touched.
    If you didn't import the photos that were in the Camera Roll with your iPhone 4 before choosing to transfer the backup for your iPhone 3G, the photos are gone and cannot be recovered. iTunes did what you instructed it to do.    

  • Every time I change password access control to allow access, it reverts after saving. How do I get the saved change to "take"?

    Outlook keeps asking me to either use the login keychain or to use confidential information connected with my email password. I went into the keychain passwords in KeyChain Access, changed the access control on each of them to allow Outlook access. I saved the changes, but then they all reverted to their previous setting.
    There is an older Keychain Access file in the Control Panel that will not open because it's either "damaged or corrupted". If I delete that, would it make a difference? What can I do to keep my access control changes when they won't stay saved?

    I do not have the disc to reload
    Why not?  You need your system dvds to troubleshoot & to reset/change passwords in view of your current OS listed in your  profile. 
    You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
    If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource:  International Support Phone #s.
    ===============
    I have to have the password, which I cannot remember or find.
    When selecting passwords, make sure it's one that you will NEVER forget AND no one else can figure out. 
    Old school--- > Print it out & keep in a safe place.  A place that ONLY you know about AND never forget.
    New school---> Get a password manager utility.  Highly recommend 1Password which is shareware.  Do a Google search for free password managers.

  • How to Rename Pictures after they are Saved

    Could not find out how to do this, but discovered it can be done by going to File Manager. But first you must know the current name of the picture and I cannot see how to find the name while viewing the picture. Any way to do this?

    Perhaps you should set your FileManager to show thumbnails, same as you'd see in your Pictures folder.
    That's what I've done and I don't have to search filenames.
    take care.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to restore image after cropping

    void cropLayer(PIActionDescriptor descPosition, int32 layerIndex, PIActionDescriptor  currLayer)
            // get "currLayer" layer bounds
           error = sPSActionDescriptor->GetFloat(descPosition, keyTop, &top);
           error = sPSActionDescriptor->GetFloat(descPosition, keyLeft, &left);
           error = sPSActionDescriptor->GetFloat(descPosition, keyBottom, &bottom);
           error = sPSActionDescriptor->GetFloat(descPosition, keyRight, &right);
          // Select area to crop "currLayer"
          error = sPSActionDescriptor->PutUnitFloat(desc0006D190, keyTop, unitPixels, top);
          error = sPSActionDescriptor->PutUnitFloat(desc0006D190, keyLeft, unitPixels, left);
          error = sPSActionDescriptor->PutUnitFloat(desc0006D190, keyBottom, unitPixels, bottom);
          error = sPSActionDescriptor->PutUnitFloat(desc0006D190, keyRight, unitPixels, right);
          error = sPSActionDescriptor->PutObject(desc0006D188, keyTo, classRectangle, desc0006D190);
          error = sPSActionControl->Play(&result, eventSet, desc0006D188, plugInDialogSilent);
         // crop "currLayey"
         error = sPSActionDescriptor->Make(&desc0006D388);
         error = sPSActionDescriptor->PutBoolean(desc0006D388, 'Dlt ', true);
         error = sPSActionControl->Play(&result1, eventCrop, desc0006D388, plugInDialogSilent);
         // export "currLayer" as PNG
        // restore "currLayer" as original?
    Hello,
    As above code, I am calling "cropLayer()" in a loop.
    After cropping a layer, image size is affecting for other layers and gives me error in layer bounds.
    Because, size is changed for other layer size after a current layer cropping.
    I need to reset/restore layer coordinates before cropping next layer.
    Also I tried with 'eventUndo' but can't generate code by listner. How does it possible ?

    Use CSS Disjointed Rollovers.
    http://alt-web.com/DEMOS/CSS-Disjointed-Image-Rollover.shtml
    http://alt-web.com/DEMOS/CSS-Disjointed-Rollover-1.shtml
    http://alt-web.com/DEMOS/CSS-Disjointed-Rollover-2.shtml
    http://alt-web.com/DEMOS/CSS-Disjointed-Rollover-3.shtml
    Nancy O.
    THANK YOU NANCY It worked perfectly!
    THANKS GRAMPS!

  • Going back to same row after saving changes in classic report

    dear all,
    I have a long classic report .User is able to update different rows of this report using MR update process.Now user is asking for easier flow.What he wants is to be able to go back to same row after he saves the changes.How is it possible to do so
    Thank you so much,
    Zahra

    Hi,
    I have one sample
    https://apex.oracle.com/pls/apex/f?p=40323:40
    When you change Active column select list, page is submitted. After submit JavaScript scrolls report
    See this post about details
    HELP TABULAR FORM CURSOR FOCUS
    Regards,
    Jari

  • How to restore pictures from an iphone 4 to my ipad?

    I erased everything from my iPhone 4and gave it away; so i dont have it anymore.
    All my pictures from my iPhone got erased too but i need to get them back onto my iPad.
    I do have an iCloud account and i did put it on my ipad, the iPad does recognize my iPhone on my name and the amount of storage saved but does not let me access the pictures from it?
    I need to get all my pictures back and i would like to view them too, but how?
    Can someone help and if possible, step by step?

    Hello, is there anybody out there? I cannot free up the space... I've deleted all pictures and videos, but memory is still full... What should i do?

Maybe you are looking for