How to restore Project from repository for specific date ?
Hello,
I have Web Dyn Pro Project. Some files were deleted in project and were checked in to repository.
Could you please describe easy steps how to restore project state for specific date ?
The only way you could do that was if you used Time Machine on the computer to make backups. You could simply store the mobile backups folder on the day you wanted and then restore the iPhone.
I've done this successfully in the past.
Similar Messages
-
How to open project from an earlier version (RH x3) using RoboHelp 6.
Hello everyone, I need your help. I have recently upgraded
from RH x3 to RH V6. I have just completed the installation of RH6
after spending long time with Adobe customer support as it took
them long time to figure out how to provide me the unlocking key to
install RH v6.
BTW I have only installed RoboHelp 6 by itself. I did not
install their Source Control because we already have Visual Source
Safe which we have been using in our company.
Also, since I had Adobe Reader 8 installed on my PC, I did
not install Acrobat Element 7 either. As I suppose if Acrobat 7 or
higher is installed RH v6 was not going to install Acrobat Element
7.
Well, now after I have installed RH v6, my first step is to
find out how to open project from an earlier version (RH x3) using
RoboHelp 6.
RH x3 is installed on my old PC and I am working on my new PC
where I have installed RH V6.
Sorry, for providing you too many details, the purpose is
only to give you a clear picture.
Please, give me your feedback if I am doing everything
correct and how should I open the project from an earlier version.
ThanksHi Peter,
Thank you so much for the response. Actually, after I posted
the question on Forum we had lost internet connection for some time
and I just went ahead and tried it by myself.
This is what I did – since we use MS Visual Source
Safe, my all files were in the working folder of VSS in my c drive.
I just clicked the Open tab/More Files in RoboHelp Starter and
located the RoboHelp HTML Project File. It opened without any
problem. Everything looks alright.
Is there anything specific I should be checking to make sure
if it is working fine in this version of RH. Because I did not
create this project, somebody else did and I have never used this
tool before this is the first time I will be using.
I found your site pretty helpful though and it did have some
information about Source Safe. I still have one question related to
Visual Source Safe that Is RoboHelp v6 linked to VSS automatically
and check the files out from it automatically whenever a project is
opened or we have to manually set the link between the RH6 &
VSS.
In RH x3 whenever I would open a project it would prompt a
message that in order to open this project the following files need
to be writable, would you like to make them writable, selecting
that option would checkout all the files from the VSS to make them
writable. However, in RH V6 I opened an existing project and it
opened without checking out the project files from VSS. Do you have
any idea what’s happening?
Ps: Do you recommend any book on RH 6 for starters or any
other recommendation?
Your help is always appreciated -
How can I use Automator to extract specific Data from a text file?
I have several hundred text files that contain a bunch of information. I only need six values from each file and ideally I need them as columns in an excel file.
How can I use Automator to extract specific Data from the text files and either create a new text file or excel file with the info? I have looked all over but can't find a solution. If anyone could please help I would be eternally grateful!!! If there is another, better solution than automator, please let me know!
Example of File Contents:
Link Time =
DD/MMM/YYYY
Random
Text
161 179
bytes of CODE memory (+ 68 range fill )
16 789
bytes of DATA memory (+ 59 absolute )
1 875
bytes of XDATA memory (+ 1 855 absolute )
90 783
bytes of FARCODE memory
What I would like to have as a final file:
EXCEL COLUMN1
Column 2
Column3
Column4
Column5
Column6
MM/DD/YYYY
filename1
161179
16789
1875
90783
MM/DD/YYYY
filename2
xxxxxx
xxxxx
xxxx
xxxxx
MM/DD/YYYY
filename3
xxxxxx
xxxxx
xxxx
xxxxx
Is this possible? I can't imagine having to go through each and every file one by one. Please help!!!Hello
You may try the following AppleScript script. It will ask you to choose a root folder where to start searching for *.map files and then create a CSV file named "out.csv" on desktop which you may import to Excel.
set f to (choose folder with prompt "Choose the root folder to start searching")'s POSIX path
if f ends with "/" then set f to f's text 1 thru -2
do shell script "/usr/bin/perl -CSDA -w <<'EOF' - " & f's quoted form & " > ~/Desktop/out.csv
use strict;
use open IN => ':crlf';
chdir $ARGV[0] or die qq($!);
local $/ = qq(\\0);
my @ff = map {chomp; $_} qx(find . -type f -iname '*.map' -print0);
local $/ = qq(\\n);
# CSV spec
# - record separator is CRLF
# - field separator is comma
# - every field is quoted
# - text encoding is UTF-8
local $\\ = qq(\\015\\012); # CRLF
local $, = qq(,); # COMMA
# print column header row
my @dd = ('column 1', 'column 2', 'column 3', 'column 4', 'column 5', 'column 6');
print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
# print data row per each file
while (@ff) {
my $f = shift @ff; # file path
if ( ! open(IN, '<', $f) ) {
warn qq(Failed to open $f: $!);
next;
$f =~ s%^.*/%%og; # file name
@dd = ('', $f, '', '', '', '');
while (<IN>) {
chomp;
$dd[0] = \"$2/$1/$3\" if m%Link Time\\s+=\\s+([0-9]{2})/([0-9]{2})/([0-9]{4})%o;
($dd[2] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of CODE\\s/o;
($dd[3] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of DATA\\s/o;
($dd[4] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of XDATA\\s/o;
($dd[5] = $1) =~ s/ //g if m/([0-9 ]+)\\s+bytes of FARCODE\\s/o;
last unless grep { /^$/ } @dd;
close IN;
print map { s/\"/\"\"/og; qq(\").$_.qq(\"); } @dd;
EOF
Hope this may help,
H -
How to restore files from Time Machine after Clean Install of Mavericks
How to restore files from Time Machine after Clean Install of Mavericks. I know the data is there but seems unaccessable because I may have changed the Computer or Owner name. Is there any way to fix that now?
Hi Linc,
my back-up data is managed by Time Machine; the actual data is on a second internal Hard Drive with a capacity of 1TB - not partitioned. I am using Time Machine and have access to all data backed up since Mavericks Clean Install but not the data prior to this date.
When I open the 1TB drive in Finder I can see a folder "Backups.backupdb/Sigi's Mac Pro/ followed by many folders of backup dates going back to 2010-09-20-103441 and up to 2014-02-07-142414 all followed with folder Macintosh HD. February 7th 2014 was the date of the clean install.
These Backups are followed by backup date folder 2014-02-08-075554 with a subfolder of MacPro-320GB (this is the name I assigned to my Boot Drive during formatting; I suspect I should have assigned the same name as before ie. Macintosh HD) and 2014-02-11 with a subfolder Macintosh HD, these are the ones I get access to by way of Time Machine > Restore.
Weird thing is on Febr 11 when I relised my possible mistake and renamed the Bootdrive back to what it was initially ie. Macintosh HD despite this I have access to all backup data since the Clean Install in both folders MacPro-320GB as well as Macintosh HD but not to any data prior to the Clean Install.
Is there something that Time Machine knows and prevents access or is it simply a matter of renaming the subfolder 2014-02-08-07554/MacPro-320GB to ........./Macintosh HD?
I like to restore selectively and not everything - It was hard work reinstalling apps that were supposed to be the troublemakers (ref my discussion on Maverick problems) but I now need to get onto data specific to some of these apps as well as other data I may have missed. Long story? Yes and sorry.
Sigi -
How to Restore iPad from iPhone Backup?
I have an iPad and an iPhone, now I have a problem, I want to Restore iPad from iPhone, but Idon't know how to do this job, can you give me some advise about how to restore iPad from iPhone backup file?
Restore from iCloud Backup
1. Settings>General>Reset>Erase all content and settings
2. Tap Erase
3. You'll see Apple logo and progress bar
4. Hello
5. Slide to set up
6. Set language
7. Set country
8. Choose Wi-Fi network; enter Wi-Fi password
9. (a) Use Location Service (b) Don't Use Location Service
10. Select option
11. (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
12. Selected Restore from iCloud Backup
13. Enter password for iCloud
14. Agree to Terms and Conditions
15. Setup Apple ID
16. Select backup
17. Restoring from iCloud
18. Hello
19. Restore Completed. Your iPad was restored successfully. There are just a few more steps to follow and then you're done!
20. Continue
21. Finish setting iCloud enter Password
22. Updating iCloud settings
23. Create a Passcode
24. Welcome to iPad
25. Get Started
26. Restoring Apps and Media
27. Enter Apple ID and Password
28. Notice: Restore Incomplete, some items could not be downloaded from the Store. If they are on your computer, you can restore them by syncing with iTune
29. Connect iPad to iTune to sync with computer
30. Sync Music, Videos and Album Artwork -
How to clean project from comman line ?
How to clean project from comman line ?
I would like to invoke the same functionality as in Flex
Builder Project -> clean... -> clean all projects...
but from command line is it possible ?You can:
1) Perform a project clean up (p.153 of the user manual) - it removes any unused recordings, samples and other files
2) Consolidate project (p. 154 of manual) - this copies all the used audio material into the project folder and also deletes any empty folders within project folder, making it easier to navigate
3) Save project as a copy - this creates another project folder, but without all the backups and other additional files -
How do I activate AUTOMATIC superscripting for numbers / dates; e.g. 1st, 2nd, 3rd, 4th, etc .... It used to do this in all PRE-5.0 versions of Pages; now, it is GONE from Pages 5.0, and I cannot find out where / how to activate it !!
Whilst I appreciate your responding - I do not think this helps with what I was enquiring (at least not without further explanations anyways).
I am aware of, and do use, the function - System Preferences > Keyboard > Text - for various replacements like (tm), (c), etc .... and also for fractions like 1/2, 1/4, 1/3.
However, my question was in relation to SUPERSCRIPTS for dates / numbers - namely, superscripting numerical suffixes for things like 1st, 2nd, 3rd, 4th,
So - please help - HOW do I set this up ? If indeed it is possible without System Preferences > Keyboard > Text ??? -
How to import project from Final cut pro 7 to X ?
how to import project from Final Cut Pro 7 to X ?
please tell me if FCP 7can create any kind of file that FCP X can read ?
I can read FCP 7 .mov file with QuickTime, but not with FCP X ? what can I do ?
Sould I use a Premiere on PC to make files compatibles in between 2 apple Softwares ?
I have a lot a files that have been created with FCP 7 and I just buy FCP X , so I am Stuck !!!
thank you in advance -
How to stop Firefox from checking for add-on compatibility every time it opens?
How to stop Firefox from checking for add-on compatibility every time it opens?
That can be a problem with the compatibility.ini file in the Firefox profile folder.
Try to rename (or delete) the compatibility.ini file in the Firefox profile folder to see if that helps.
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
You can also check for problems with preferences.
Delete possible user.js and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences -
How to check the tran code for specific activity.
Hello friends ,
could you please let me know how to check the tran code for specific activity . AS in table , i can check , what transaction does what ? But now i need to check the transaction for specific activity .
E.g , For Administrator workbench , there is transcation like RSA1 .
thanks in advance
RegardsHi,
try the TSTC table with SE16.
Hope it helps,
MG -
For anyone who has used "Smilebox" for greeting cards: I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also. I have not been able to figure out how to take clips from iMovie for use with Smilebox.
For anyone who has used "Smilebox" for greeting cards: I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also. I have not been able to figure out how to take clips from iMovie for use with Smilebox.
-
HT4623 how to download bibles from youversion for offline reading
how to download bibles from youversion for offline reading
If you install the app properly then all available versions will have been installed for reading offline. If you want audio on any particular version that provides that option then you have to be online.
-
How to download videos from Firefox for android phone???
how to download videos from Firefox for android phone???
Duplicated topic:
*[https://support.mozilla.org/en-US/questions/982466 /questions/982466] -
How to restore 16gb from 32gb backup
how to restore 16gb from 32gb backup
You can't. You'll have to delete some data off the device you backed up and create a smaller backup.
-
User login report in Active Directory for specific date and time
I want to get User login report in Active Directory for specific date and time e.g user logged in at15-01-2015 from 8:00am to 4:00pm
Is any query, script or any tool available?
Waiting for reply pleaseYou can identify the last logon date and time using my script here: https://gallery.technet.microsoft.com/scriptcenter/Get-Active-Directory-User-bbcdd771
If you would like to get back in time and see when the user did a logon / logoff then you need to have auditing enabled. Once done, you can records from Security log in the event viewer: https://social.technet.microsoft.com/Forums/windowsserver/en-US/98cbecb0-d23d-479d-aa65-07e3e214e2c7/manage-active-directory-users-logon-logoff-events
I have started a Wiki about how to track logon / logoff and it can help too: http://social.technet.microsoft.com/wiki/contents/articles/20422.record-logon-logoff-activities-on-domain-servers-and-workstations-using-group-policy.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile
Maybe you are looking for
-
New Mac Book and Photoshop Elements
My daughter just bought a new MacBook (Mac OS X 10.5.4 2.4 Ghz Intel Core 2 Duo 2 GB 667 MHz DDR2 SDRAM) and tried to install my Photoshop Elements software onto it. My Photoshop is kind of old (Elements 2.0), but I use it on my Mac all the time with
-
ADFS SSO not working correctly on 'old' portal, but works fine on preview portal
We recently configured an AADSYNC and ADFS 'connection' between Azure and our on-premise environment. When i log into the preview portal everything works fine, I'm being redirected to our ADFS proxy server and I get authenticated and logged into the
-
Web Reporting, drop down box.
Hi Friends, Previously we have a variable for 'Selection Time Category'. They no more want to use a varible instead they want to put as navigational, I think filters in web. Can I use a drop down box for this. What I have done is I placed infoobject
-
What to type in url bar to access servers?
I don't know if I'm asking this right because my searches result in no help. I'm connected to my work via VPN. I remember that there is someway to type something in the url bar to access the servers. Something like \\servername\sharename. I don't kno
-
Send some atributes from a Servlet to a JSP program
Hi all, I am quite new to JSP programming and am facing a problem. I have a Servlet code which is supposed to send some attributes to a JSP, which will display the attribute that has been passed through the Servlet.