How to restore purchased ringtones before erasing the data on iph through iTunes

i forgot my passcode and it says connect to iTunes , when i followed the steps it tells me to restorer iph but it will erase my purchased data also , is there anyway i can keep my purchased ringtones n erase the iph?

Hi suebeehoney0508,
If you are having issues syncing your ringtones back to your iPhone after a recent update, you may find the following User Tip helpful:
How to sync ringtones to your iPhone | Apple Support Communities
Regards,
- Brenden

Similar Messages

  • How to restore purchased ringtones after IOS 8 update

    I have iPhone 5c.    After I did the IOS 8 update and then the ios 8.0.2 update, I no longer have my purchased iTunes ringtones (I only have three that I purchased).    It shows I purchased them in my iTunes store and my music icons on my phone.   But when I go to settings and sounds and tones, they are not there.   Trying to figure out HOW to restore them to my iPhone. 
    Help?    I am an idiot, so I would appreciate step by step directions.   Thanks!

    Hi suebeehoney0508,
    If you are having issues syncing your ringtones back to your iPhone after a recent update, you may find the following User Tip helpful:
    How to sync ringtones to your iPhone | Apple Support Communities
    Regards,
    - Brenden

  • ODI - How to clear a slice before executing the data load interface

    Hi everyone,
    I am using ODI 10.1.3.6 to load data daily into an ASO cube (version:11.1.2.1). Before loading data for a particular date, I want the region to be cleared in the ASO cube defined by "that date".
    I suppose I need to run a PRE_LOAD_MAXL_SCRIPT that clears the area defined by an MDX function. But I don't know how I can automatically define the region by looking at several coloums in the data source.
    Thanks a lot.

    Hi, thank you for the response.
    I know how to clear a region in ASO database. I wrote a MaxL like the following:
    alter database App.Db clear data in region '{([DAY].[Day_01],[MONTH].[Month_01],[YEAR].[2011])}'
    physical;
    I have 3 seperate dimensions such as DAY, MONTH and YEAR. My question was, I don't know how I can automize the clearing process before each data load for a particular date.
    Can I somehow automatically set the Day, Month, Year information in the MDX function by looking at the day,month,year coloumns in the relational data source. For example if I am loading data for 03.01.2011, I want my MDX function to become {([DAY].[Day_01],[MONTH].[Month_03],[YEAR].[2011])}'. In the data source table I also have seperate coloumns for Day, Month , Year which should make it easier I guess.
    I also thought of using Substitution variables to define the region, but then again the variables need to be set according to the day,month, year coloums in the data source table. I also would like to mention that the data source table is truncated and loaded daily, so there can't be more than one day or one month etc in the table.
    I don't know if I could clearly stated my problem, please let me know if there are any confusing bits.
    Thanks a lot.

  • How can I purchase a GIFT using the credit balance in my iTunes account?

    When attepting to gft an app to a friend, the iTunes store is asking for a credit card when I have a rather sizable credit in my iTunes account. ***? I don't want to pay MORE when I already HAVE plenty of money in my account!
    How can I gift using my credit?

    That's a total CROCK!! Now I can't buy my mom a mother's day gift.

  • My iPad Air is disabled after wrongpassword attempts.I didn't sync it with my laptop also. How can I restore it with out losing the data.

    My iPad Air is disabled after wrongpassword attempts.I didn't sync it with my laptop also. How can I restore it with out losing the data.

    You can't unlock it without losing data. It's too late for that now. You totally erase the iPad when you unlock it and you will have to start all over again. Most of your purchased content can be downloaded again.
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    Download past purchases - Apple Support

  • How to find purchased ringtones on iPhone 4s

    I'm new to all this. New to iPhone, new to smart phones, basically new to iTunes - I've had the software on my computers for years, somewhere along the line I created an account but really never used iTunes.
    I bought a ringtone on my phone and want to put in on my wife's phone - we share the same iTunes account. After I purchased the ringtone, it showed up in my ringtones fine. However I can't figure out how to get it on the other phone, while playing around trying to find the way I went to the store from my phone, from the ringtones settings and can't even find that purchase at all. I know I was charged for it. When I look at recent purchases it has options for:
    Music
    Movies
    TV Shows
    When I tap Music it shows all the music we've purchased but no ringtones - no option for Ringtones or Tones on recent purchases so I'm lost, please help and remember, I come from a Windows background and am not that fimilar with iTunes. I've googled for restoring lost ringtones but all the directions seem to be for a previous version of iTunes because I can't find what they are talking about.
    Thank You for your help!!

    while I was playing around last night in between your answers to my questions I hit 'Consolidate Files' on the right click for the ringtone and didn't restart iTunes, didn't think about it last night but if the files were moved maybe iTunes needed to be restarted. I do not know this software but I'm guessing that is the cuase of my problems.
    However I did hit Revert and Apply so I don't know.
    On iTunes when you click menu File > Library > Organize Library... > Consolidate Files, you are letting iTunes manage your content, it will make a copy of your content to the path where iTunes keeps indices, media structures, etc.
    It is a good idea to do that since it will update the database as well.
    I am wondering if I should delete the back-ups for both phones and start over following your procedures again, I'm just a bit leary to do that. If I go that route, would I need to deregister and re-register phones too?
    You can delete the backups in iTunes > Preferences...(Windows: Edit > Preferences...) > Devices > delete the backup here. After that, you can right click on iPhone in iTunes sidebar and do a fresh new Backup.
    I am wondering if I should delete the back-ups for both phones and start over following your procedures again, I'm just a bit leary to do that. If I go that route, would I need to deregister and re-register phones too?
    No, you do not need to de-register and re-register iPhones.

  • I forgot my passcode to reset and erase the data . how i have to reset and erase data on my ipad mini

    i forgot my passcode to reset and erase the data . how i have to reset and erase data on my ipad mini

    Do you have a question? Is your iPad disabled?
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How to restore a session before last session on mozilla ?

    how to restore a session before last session on mozilla ? i had more than 100 tabs opened, some of them were important... :(
    a bak file wont help me...

    You can also try right-clicking on an empty space in the profile folder > '''Properties''' > '''Previous Versions''' to check if there are older versions at the folder level. If there is an older dated version, select it > '''Open''' and browse for the sessionstore.js file. Other than that you could also try to retrieve as much as possible by checking the Firefox '''History''' library ('''Alt''' + '''S''') > '''Show All History'''.

  • How to transfer purchased ringtones from iphone4S to iphone6

    How to transfer purchased ringtones from iphone4S to iphone6, have tried syncing to no success

    Janelh wrote:
    How to transfer purchased ringtones from iphone4S to iphone6, have tried syncing to no success
    Hi Janelh,
    I also confused about this, I can't do that by myself I don't know the reason. I search it and see phone transfer tool needed. However what is the best tool? Maybe copy data from old iPhone to pc first? Just to see here:  how about it?
    http://www.vibosoft.com/ios/how-to-transfer-songs-from-iphone-to-iphone.html

  • How to recover purchased ringtones after wiping phone and laptop

    How to recover purchased ringtones after wiping phone and laptop

    From your computer backup.
    Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not all media formats are available in all countries (see: iTunes in the Cloud, iTunes Match, and iTunes Radio availability by country - http://support.apple.com/kb/HT5085); apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this).  Downloading previously purchased movies and TV shows requires iTunes 10.6 or later.  Discontinued items not available. For items not included in the iCloud list (e.g., ringtones, audiobooks), or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid.  Apple recommends,  "... back up your iTunes library. " (http://support.apple.com/kb/ht2519).

  • Iphone won't turn on - how to erase the data?

    my iphone has been water damaged and will not turn on at all. How can I erase the data before I sell it on ebay?

    Try putting it in a bag of rice with the bag open and in a warm area for a few days (I used the top of a lamp shade for my old PDA - worked well). It might come back on after drying out.
    You could also microwave it but that would reduce its Ebay value just slightly!

  • How can i purchase an app of japan store without change my itunes store? i have balance in my US ac so i cant change my stores, but the app i want to purchase in jp store is a free app.... i know apple dun allow balance spend in other countriesbutitisfree

    How can i purchase an app of japan store without change my itunes store? i have balance in my US ac so i cant change my stores, but the app i want to purchase in jp store is a free app.... i know apple dun allow balance spend in other countries but it is a free app

    You cannot use the Japanese iTunes Store unless are physically present there and have a Japanese payment method. This applies even for free apps; you cannot get them from the Japanese iTunes Store if you are in the US.
    If you are in Japan, you can set up a new iTunes Store account just to get free apps. See:
    http://support.apple.com/kb/HT2534
    Read the steps carefully as the order in which you follow them is  critical. Note that you can do this only when creating a new Apple ID. You cannot use an existing ID.
    If you have moved to Japan and wish to change the country of your account permanently, you can contact the iTunes Store and ask them to clear your remaining balance. You will need to be able to provide a Japanese payment method, though.
    Regards.

  • How can I erase the data on my 2009 macbook pro that won't turn on because of a faulty motherboard? Do I just remove the hard drive, install it in a working mac, and erase it that way?

    How can I erase the data on my 2009 macbook pro that won't turn on because of a faulty motherboard? Do I just remove the hard drive, install it in a working mac, and erase it that way? Thanks.

    You put the internal drive in an enclosure. If you choose to keep the drive, you don't need to erase it.
    (110687)

  • How to restore a deleted file from the iCloud

    How to restore a deleted file from the iCloud

    first you right click on the ipad (on the left in itunes): restore from backup.
    It will restore to factory ALL data anda apps
    At some point it will offer restoration from itunes, but you will only see backups made on your computer.
    If you wish to restore from icloud you forget itunes on your computer, go to the ipad and follow the instructions. At some point you will be asked to choose from icolud or confgiure it as a new ipad.
    it works

  • How to validate plan data before saving the data

    I have a total row in my planning layout which is a summation of plan data in 2 other rows. While saving the data, I should check whether the total is 200 and if not the data should not be saved. How can I achieve this! Any help would be appreciated.
    Regards,
    Tipo.

    Hi,
    I'm also facing the same problem in my development...I tried above all the ways,but we cannot stop saving the wrong data.In this case you have to write the java script for save button, before saving the data if it is correct then go for the next step to save other wise throw an error message or without save the data .
    You need to write the JAVA script for save button,in this code you need to read the data form the layout and check the total value, i am not sure if layout is dynamic how we can achieve this???.
    My development also stopped for this issue,In my case i  have two layouts ,one is for actual and another one is for Planing layout(Function - Distribution equally),using the fox code i succeed to read and throw an error message for incorrect data but i can not stop to saving for incorrect total data.
    Once you solved this problem please post the message in SDN.This type of requirements is very tough and we need to share to our friends.
    Thanks.

Maybe you are looking for