How to restore/reset Snow leapord(10.6.8) on macbook pro, no DVD

Hi,
I want to restore/reset Snow leopard (10.6.8) on MacBook pro to factory settings. I don't have installation DVD.
Reason for restoring/resetting, I purchased used MacBook pro. I never used MAC before, always used Windows.
I did not realize while purchasing it, I will need installation DVD. I want to clean up previous user setting and preferences. I am using MAC first time, so be on safe side want to get rid of, if any remote access to my MacBook, data sharing or anything like this.
I don't want to buy installation DVD from apple.
Is there a way to make bootable USB from current installation?
If I cannot make bootable USB, what settings/preferences I need to clean up for achieving my safety concern?
Please suggest me solution for above mentioned questions or any other solution.
Thanks.

TawtinTom wrote:
 Is there a way to make bootable USB from current installation?
No.
On Linux that can be done, but not OS X, no program that I know of exists, but it would certainly be welcome, but Apple would likely sue them.
I did not realize while purchasing it, I will need installation DVD.
The original 10.6 machine specific disks should have came with the used machine, contact the original owner.
so be on safe side want to get rid of, if any remote access to my MacBook, data sharing or anything like this.
If I cannot make bootable USB, what settings/preferences I need to clean up for achieving my safety concern?
You will need to securely wipe the entire drive to accomplish this and you will need to boot from the 10.6 install disk.
Software can lie to you, so if it says one thing it still might be open and exposing you to intrusions.
I don't want to buy installation DVD from apple.
You'll need the 10.6.4-10.6.8 disk and if the machine originally came with 10.6.3 or later then you will need to contact Apple to get machine specific versions of the disks as those are not sold online, except if your lucky and find a used one for that exact model of Mac on eBay or something.
Intel Mac's that originally came with 10.4-10.6.2 from the factory can use the white 10.6.3 retail disks (sans free iLife), you can purchase from Apple or on Amazon.com or elsewhere.
If your interested in not installing malware, then don't use the illegal copies on P2P networks.
To find out what OS X version came with the machine, use the free MacTracker, also these links
https://support.apple.com/kb/HT1159#MacBook_Pro   https://support.apple.com/kb/HT1349
https://support.apple.com/kb/HT1559   http://www.everymac.com/ultimate-mac-lookup/
To erase and install Snow Leopard
How to erase and install Snow Leopard 10.6
Optional: For Snow Leopard Speed Freaks
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Similar Messages

  • HT201240 How do I reset my lost login account password on Macbook Pro OS 10.7.4

    How do I reset my lost login account password on Macbook Pro OS 10.7.4.
    Why is there no community checkbox for OS 10.7.3 or 10.7.4 when 10.8 is due within days?

    http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/
    http://osxdaily.com/2011/09/19/change-password-mac-os-x-10-7-lion-without-knowin g-current-password/
    Why would there be? There's never been version support, just the OS.

  • After updating my software from snow leapord to mountain lion my  MacBook   Pro suddenly keeps shutting down without any reason no warning suddenly just restarts... Can someone help

    After updating my software from snow leapord to mountain lion my  MacBook   Pro suddenly keeps shutting down without any reason no warning suddenly just restarts... Can someone hel

    Note the date and time the problem occurred, then go to Applications/Utilities/Console and copy the log starting at the time of the crash. Paste the log in a reply. Please do not use a screen shot as they can be hard to read. If there are repeated runs of the same messages, please post only one run. Be selective about what you post and don’t  post huge amounts. Make sure there is no personal data visible. Information learned from Linc Davis.

  • How to restore from time machine after HDD upgrade on macbook pro?

    Hi,
    I have recently bought a WD 2.5 inch SATA 750GB 7200RPM 16GB HDD and plan to use it on my macbook pro 13 inch 2.4ghz early 2011. I will leave the pysical installation part to Apple Service. I have my Time Machine backup on an external hard disk. So, once I get the upgraded macbook, what are the steps I should follow for a complete Time Machine restore? (Including the formatting on the new HDD).
    One more question; when I transfer my applications to the new HDD will Time Machine "remember" their activation codes and license information ?
    Thanks a lot.

    http://web.me.com/pondini/Time_Machine/14.html
    This has all the instructions for a complete restore, including how to format the disk. Pondini's site probably has anything else you want to know too.
    Good luck!

  • How do I install Adobe Photoshop Elements 12 on new MacBook Pro without DVD drive?

    I just purchased my first MacBook Pro and am trying to get everything set up and installed. I purchased Adobe Photoshop Elements 12 and retrieved my serial number and have the redemption code -- but I can't figure out how to install Photoshop without a DVD drive. The Photoshop package I purchased only provides DVDs and I don't have a DVD drive. Is there a website I can go to to install Photoshop and enter my serial number or redemption code?

    Have you tried downloading the trial version and using your serial
    number to activate it?
    The trial version is a complete product and can be activated by
    inserting the valid serial number.
    Good luck.

  • How can i  reset all setting to factory on my macbook pro, how can i  reset all setting to factory on my macbook pro

    now i  have problem about the wifi adapter cause i buy one wifi antenna  for my mac but after i install it and plug the anntenna it show message that need to restart the computer , then i try to install with my friend macbook and it work no any problem at all so i think it because i try install  another antenna and setup something in the system that why i want to reset all it back to original

    noodetcha wrote:
    and  is there anyway just refresh the system with out delete any program or saved file ?
    just make the system setting like form factory.
    Can't have it both ways.  "Refreshing" w/o deleting programs and restoring to factory level are 2 different things.  Also, it depends on which OS system you have.  You did not mention this in any of your postings nor have you included your system info.
    You have to decide which do you actually want to do?
    Archive & Install (if your OS allows)
    Erase the HD (restore to factory level)

  • I have just acquired an iMac desktop. I want to sign on to my airport wireless network, but cannot remember the password. How can I access the password or reset it. I already use a MacBook Pro and an iPad on the network.

    I have just acquired an iMac desktop (about 4 years old). I want to connect to my Apple airport wireless network, but cannot remember the password. How can I access the password or, if necessary, reset it. I already use a MacBook Pro and an iPad on the network and don't want to jeopardize what already works well. I am not all that computer literate.

    How can I access the password or, if necessary, reset it.
    Read the user manual that came w/your Airport router or you can cross-post in one of the  AirPort Forums for instructions. 

  • How can i clean up my disk space on my MacBook Pro

    how can i clean up my disk space on my MacBook Pro something  like a disk cleanup on a pc?

    Those things you did on your PC you need not worry about on your Mac. Most is done behind the scenes.
    Kappy's Personal Suggestions About OS X Maintenance
    For disk repairs use Disk Utility.  For situations DU cannot handle the best third-party utilities are: Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior.  Versions 1.5.1 and later are Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.)
    If you are using a pre-Leopard version of OS X, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  (These utilities have limited or no functionality with Snow Leopard, Lion, or Mountain Lion and should not be installed.)
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
    I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
    For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. (There is no confirmation that this version also works with Lion or later.)
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner.
      2. Data Backup
      3. Deja Vu
      4. SuperDuper!
      5. SyncTwoFolders
      6. Synk Pro
      7. Synk Standard
      8. Tri-Backup
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Always have a current backup before performing any system updates or upgrades.
    Additional suggestions will be found in:    
          1. Mac Maintenance Quick Assist,
          2. Mac OS X speed FAQ,
          3. Speeding up Macs,
          4. Macintosh OS X Routine Maintenance,
          5. Essential Mac Maintenance: Get set up,
          6. Essential Mac Maintenance: Rev up your routines,
          7. Maintaining OS X, 
          8. Five Mac maintenance myths,
          9. How to Speed up Macs, and
        10. Myths of required versus not required maintenance for Mac OS X.
    Referenced software can be found at CNet Downloads or MacUpdate.
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity or 20 GBs, whichever is greater, as free space.

  • How do I fix a super-sensitive trackpad on my MacBook Pro (17-inch)?

    How do I fix a super-sensitive trackpad on my MacBook Pro (17-inch)?

    Jumpy Trackpad
    http://support.apple.com/kb/TS1449
    Go step by step and test.
    1. Restart
    2. Shut down the computer.
        Clean the trackpad with moist not wet microfiber cloth.
        System Preferences > Point & Click
        Try turning off three finger dragging and then turning it on after  testing.
    3. Is there any Bluetooth device nearby with failing batteries? If so, replace the batteries.
      4. Reset PRAM:   http://support.apple.com/kb/PH14222
    5. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    6. Close all windows and quit all applications.
        Click the Spotlight -the magnifying glass icon- in the menu bar. Enter Disk utility in the box.
        Select Disk Utility from the drop down. When the Disk utility window opens up,
        select  Macintosh HD, then First Aid.
        Click Repair Disk    Section: "Try Disk Utility" Permissions button.
        Ignore the  time remaining estimate.
        Last 1 minute may take longer.

  • How to make Address Book obey Preferences? I run MacBook Pro 4.1 laptop,  Mac OS X 10.6.8  Address Book 5.0.3 (883) Preferences set at ... General First name following Last name   Sort for Last name Address Format Canada Font size Large Phone format set a

    How to make Address Book obey Preferences?
    I run MacBook Pro 4.1 laptop,  Mac OS X 10.6.8
    Address Book 5.0.3 (883) 
    Preferences set at ...
    General
    First name following Last name 
    Sort for Last name
    Address Format Canada
    Font size Large
    Phone format set at
    +1.123.456.7890
    When application quits - it's all forgotten and it self-resets to
    unwanted configuration.

    Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
    Here are some general guidelines. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
    If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.

  • How can I install Windows 8.1 Enterprise on my Macbook Pro  With BootCamp?

    How Can I Install Windows 8.1 Enterprise on my MacBook Pro?

    Hi Armin.S,
    I apologize, I'm a bit unclear on the exact nature of your question. If you are asking about the system requirements for running various versions of Windows under Bootcamp, or just more generally how to set up Bootcamp on your Mac, you may find the following articles/pages helpful:
    Boot Camp: System requirements for Microsoft Windows operating systems
    http://support.apple.com/kb/HT5634
    Mac Basics: Using Windows on your Mac with Boot Camp
    http://support.apple.com/kb/HT1461
    Apple - Boot Camp Support
    https://www.apple.com/support/bootcamp/
    Regards,
    - Brenden

  • How can I sync my iPad 2 with my new MacBook Pro when it is already synced with my old MacBook? I am getting a message on the new MacBook Pro that says I am not allowed to sync the iPad 2 because it is synced to another iTunes library.

    How can I sync my iPad 2 with my new MacBook Pro when it is already synced with my old MacBook? I am getting a message on the new MacBook Pro that says I am not allowed to sync the iPad 2 because it is synced to another iTunes library.

    1) ensure iTunes is authorized for your iTunes store account(s)
    2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
    3) sync the device
    iTunes will wipe the iPad but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPad with it.
    above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer.
    also, there are PhoneView and iRip.

  • How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion?  I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8)

    How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion?  I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8) since November until now.  Mail will no longer download on the MacBook Pro and keeps asking for my password.

    Mail should still be usable with your machine - but you'll need to update the settings to conform to the requirements of your system. Check with your ISP (like ATT, etc.) for the settings that will work with your Mail. Once you've updated this, you should be able to email like before.
    For example, my ISP required that I go to Mail Preferences/Accounts and make sure the details conform to your email settings.
    I have no idea of what your ISP is or what the settings might be, but this is likely the source of the problem.

  • How do I use an aaxa mini projector with my macbook pro?

    how do I connect my aaxa mini projector to my macbook pro.  it does not recognize it as a display.

    Hey biddily,
    Thanks for the question. The following resource provides some great information if you are having trouble with an external display or projector:
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    http://support.apple.com/en-us/HT201177
    Thanks,
    Matt M.

  • How do I know what files to remove from my Macbook Pro laptop?

    Apparently my hard drive is full and I need to remove files so I have space to download more music and movies.  I don't want to delete important files.  How do I go about doing this? 

    How do I know what files to remove from my Macbook Pro laptop?
    Remove only files you yourself stored on the laptop; files in your Home folder. Don't delete any files from the system libraries, and if you want to remove applications, use the provided uninstallers.
    For files in the media libraries - iTunes, iPhoto, iMovie use the application to delete music, photos, movies.
    If you are planning on storing more movies and music on your mac, deleting old files will probably not suffice alone to free enough space. Consider to get yourself an external drive to store your media.

Maybe you are looking for

  • Installing CS5.5 Master Collection Students Edition - Error at Setup

    Hello, after I reinstalled my Win7x64 I put my Adobe DVD's in the DVD-Drive (yes , once a time starting at #1). standard stuff : serial, ID and options work fine : C:/ is to small so i select D:/ as drive and my desired products after hitting the ins

  • Hooking up to a 37" Phillips LCD TV

    I just bought my MacBook Pro and i am curious if i can hook it up to my 37" Phillips LCD TV and still be able to use the ambientlight function that is on my TV I would be using a DVI to HDMI cable to connect. Is it possible to do this?

  • SELECT returns no result when there is a default namespace definition inXML

    Hi, I have a problem that my select doesn't return any result when there is a default namespace definition in my XML file. I'm using oracle 11g release 1 XML file stored as a binary XML: <SIMS xmlns="http://sims.ics.muni.cz" xmlns:xsi="http://www.w3.

  • Exporting audio to iphoto

    Anyone know how to export just the audio portion from final cut express so I can use it in iphoto. I want to do a quick slideshow and use music recorded on my video camera and don't wan't to spend the time adjusting the ken burns effect in final cut.

  • How do I load movies on my 30g?

      Windows XP