How to restore the administrating users

someone deleted the administrative user on the computer. ive tried to figure out how to restore it but I cant. how do i restore my administrative user to upload the windows 10

zhu19774279 wrote:
I have a user "GIS", it's tablespace is USERS, there are only two tables in this user(RASTER_DATA and RASTER_DATA_RDT).
I put some raster data in "GIS", now I delete all data(delete from RASTER_DATA), but the tablespace USERS is still 7/10GB, how to "clean" the USERS?When you delete a row, or all the rows, the extent that was allocated for them stays allocated. De-allocating/re-allocating extents is a fairly expensive operation, and it is assumed that if a table once needed an extent it will probably need it again, so it is not routinely de-allocated just because it is empty at the moment.

Similar Messages

How to recover the administrator user and pass

hello,
I instaled ORACLEXE few days ago, and accord to the instructions I've been using HR user.
but now I'd like to login as administrator because i'd like to create a new user. problem is I don't remember the administrato's user and pass.
what should I do ?
thanks in advance. Andrea.

hello everyone.
thanks for you replies.
I'm on windowns.
Problem is that I even don´t remember the name of my "user" administrator. I don´t know if it's "system" or "sysdba" or "administrator" or "root" ... :(
I´m a student, I don´t know nothing about admin databases.
in generally when I install something I use to write and keep the user I used to install but this time I forgot.
- I tried Aman... clue, problem is that I have to connect to the database as SYSDBA to perform it.
- I didn´t understand Mastalerz clue.
any more clue, or I'll have to unistall my db ? :(

How to disable the Super User menu - (Right click windows icon menu) - Server 2012 R2 - RDS

Greetings all,
Can anyone please advise how to remove the Administrator / Super User menu that appears when you right click the Windows Icon (old start button) in Server 2012 R2 - for RDS users. I have searched and been able to disable access to each of these menu items (Control
Panel, Event Viewer, Run, etc). But I am searching for a way to completely remove the menu. This menu also appears when you use Win-X shortcut.
Hope someone can help.
Terry

Hi Terry,
You can try following points, might helpful in your case. Go to
C:\Users\Default\AppData\Local\Microsoft\Windows
there you will see file called WinX
Right click this file and copy then go to
C:\Users\YOUR_USERNAME\AppData\Local\Microsoft\Windows
then paste the file into the folder.
NOTE: replace YOUR_USERNAME with your actual username.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to see the active users in the AS JAVA?

Hi Experts,
In as java how to see the active users in the system.Kindly,tell me step by step details to find the active users.As I'm new to the Netweaver administration.
Thanks,
Reddy

Hi,
You can find the login sessions with Timestamp and User in Visual Admin under SecurityProvider and tab Runtime and Login sessions. You might also get these details in NWA->Monitoring->Availability.
Regards, Rahul

TS1277 HI. I have followed all the appropriate steps above and when I try to enter my 'Password' when asked, my keyboard doesn't work. No key press can be activated at all when trying to enter my password in 'Terminal. And I am in the 'Administrator' user

HI.
I am having trouble authorising my Mac Air to my Itunes account. I found a discussion explaining how to go go into 'Terminal', then adding a command. I have followed all those appropriate steps and when I try to enter my 'Password' when asked, my keyboard doesn't work. No key press can be activated at all when trying to enter my password in 'Terminal. And I am in the 'Administrator' user. Can anybody offer any suggestions?? ta

Does the command that you're trying to enter in Terminal begin with the word 'sudo'?
If so, your keyboard is working fine. When you type your password after a sudo command, nothing is echoed to the screen for security reasons (not even the * that are normally registered in other user interfaces). However, the program is registering what you type.
Just type your password and press 'return' and the command will be executed (so long as you type it correctly; if you don't, you'll get an error message).

How to setting the root user profile?

It seems that I can't fine any complet manual to introduce how to setting the root user profile file which locate at /etc/profile? Who can help me find out or figure it out

first /etc/profile is a global profile for the system
its not only specific to root
from here you can configure the system wide paths
Regardless of the shell you are using, when you first log in your system generally runs the system profile file, /etc/profile. This file is generally owned by the system administrator and is readable (but not writable) by all users.
After your system executes the system profile, it runs the user profile. The user profile is one (or more) initialization files that define your working environment. For example, if you're in the CDE environment your system checks this file (or set of files) each time you start a new terminal or window.
refer this::
http://www.shrubbery.net/solaris9ab/SUNWabe/ADVOSUG/p33.html
man page here
http://www.unix.com/man-page/OpenSolaris/4/profile/

How to restore the contacts from iPad 2 to iPhone 5? I lost some of my contacts after deleting a closed email account; however I have them all in my iPad!

How to restore the contacts from iPad 2 to iPhone 5? I lost some of my contacts after deleting a closed email account; however I have them all in my iPad!

Do you see those in www.icloud.com? Yes- sign in to icloud on the phone.
No- how did you get those to the ipad?

I forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

i forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
This will tell you how to restore
http://support.apple.com/kb/HT1414
You will probably need to use recovery mode
http://support.apple.com/kb/ht4097

How to find the exact user exit for our requirement?

Dear Mr. keerthi,
can you please explain me how to find the exact user exit for our requirement?

Hi sandip
There is more than one method in which you can check for user-exits.The following method is used very often.
<b>How to find the exact user-exit for your requirement.</b>
1.     You can check the user exists using transaction SE85.
2.     Repository Information System -> Enhancements -> Customer exits
3.     You can search the user-exits by package name.
4.     Double click on each exit name to check the function module exits.
<b>The procedure to find the package name.</b>
Execute transaction SE93
Enter the tcode of the transaction for which you want to check the user exit.
Example: if you want to find the user-exit for purchase orders while changing, enter ME22n and press display.
You will get to see the package name
But you need to confirm that the user exit will get triggered at the appropriate event.
( example: you might want some validations to be done ON SAVE of a purchase order)
<b>Checking if the user-exit is getting triggered or not.</b>
1.     Open the user exit function module (that you have got in step 4) in Tcode SE37.
2.     Click on where used button. In the pop up that immediately appears choose only programs .
3.     You will get a list of programs. Double click on the program name.
4.     You will get the list of location where this function module user exit is used.
5.     Place session break points at each of these location ( at each CALL FUNCTION statement)
6.     Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
regards,
Prasad

How to find the ME29N 'USER EXIT' when our save the release PO after.

How to find the ME29N 'USER EXIT' when our save the release PO after.
which user exit will be used?
thanks.
alex.

Hi,
process :
    go to tranx code :   ME29N ,
       System---->Status , here copy the program name (SAPLMEGUI),
     go to abap editor and specify the program name SAPLMEGUI and find the package "ME".
     tranx code : CMOD , Utilites--->Sap Enanchement,
                                     specify the package name : ME
                                      and execute, displays a list of exits ,
                             and find out our suitable exit based on requirement.
check these :   EXIT_SAPMM06E_021
reg
Siva

How to find the appropriate user exit for invoic02 idoc in idoc_output_invo

Hi all,
I am new to this community p
i have issue regarding the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
thanks,

Hi ,
welcome to SDN.
You can select the appropriate Customer exit accrding to the available parameters .
The list of exits available are
EXIT_SAPLVEDF_001
EXIT_SAPLVEDF_002
EXIT_SAPLVEDF_003
EXIT_SAPLVEDF_004
For Example , if you want to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
Hope this Helps
Rgds
Sree
Edited by: Sree on Jul 23, 2010 12:11 PM

How to restore the original copy of OS.

The hard disk of my notebook got damaged and now I have installed new hard disk but since I didnt had any backup the windows 8.1 OS also got lost. Now I have installed trial version, can anyone let me know how to restore the original copy of OS.

If you did not make your Recovery Media set call HP Support to order one.
If you live in the US/CA, contact HP info Here.
If you live in another part of the world, start here>>Contact HP
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

How to get the Current User on the UI page?

All,
Could you please let me know how to get the Current user on the UI input page , i need to display the current user ID when some one clicks the submit button, i want o get the current user to display in the javascript alert box.
Edited by: 951930 on Oct 24, 2012 12:21 PM

lucky,
my schema has already defined for
<user mapField="USER_ID" default="%CurrentUser"/>
and in my UI page
<td oraLabel="user"></td><td oraField="user" id="userId" ></td>
and my javascript
function showUserId () {
var curUser = document.getElementById('userId').value;
alert(curUser);
and i have called this function on my submit button, but i am not able to get Current Logged User ID value to show in the alert nor able to show the current logged user on the UI page.
my requirement is on custom UI page i need to show Current Logged User in one corner of the page and also need to show the same user in alert when he submits the button.
Appreciate for the help.
Edited by: 951930 on Oct 25, 2012 8:42 AM
Edited by: 951930 on Oct 25, 2012 9:06 AM

How to get the current user logon to portal?

Hi Gurus,
How to get the current user who logged into portal.
I have a webdynpro requirement where in which I have to get the current user id who loggedinto portal which will be the input parameter of the BAPI(adaptive RFC model) which will return me employee number of the particular user.
Can anyone send me the code to retrive the user id through webdynpro application..........
Pts will be rewarded for useful inputs......
Thanks in Advance,
Dharani

Hi Dharani,
Using UMEfactory u can do that...
1. create one input field,
2. create one attribute called Uid
3. assign Uid attribute to the input field
4. type the following code in Doinit() method
            String uid = wdContext.currentContextElement().getUid();
     try {
     IUser user = UMFactory.getUserFactory().
     getUserByLogonID(uid);
     String userName = user.getDisplayName();
     } catch (UMException ex) {
      e.toString();
5. after that go to Portal create one iview assign to particular user. then u get into the user details...
thats it
Regards,
P.Manivannan

How to show the login user Id in the upper right corner of each page?

Hi,
I was wondering how to show the login user Id in the upper right corner of each page?
thanks so much!
cchu

Cchu,
The easy question first: applying a style to the welcome message. If you look at the page source, you'll see that #WELCOME_USER# is expanded to <div class="app-user">Welcome: DEMO</div> So to change the style of the message, you need to tweak the style of the app-user div in your CSS, or override it in a style block in your HTML header.
Now, the tougher question: why the text is wrapping for you. And, really, without seeing your entire page, I can't give a full answer. But I'd suggest that what's most likely happening is that the table column you're putting it in is too narrow, so it's wrapping; try replacing the td tag with <td nowrap="nowrap"> This will force the column to be wide enough to display the full message, but might result in weird formatting elsewhere on the page (depending on what all is in your table).
-David

How to restore the administrating users

Similar Messages

Maybe you are looking for