How to restore the default web configuration in Lion

Hi guys so I was messing around with apache/php/mysql, and after trying to enable openssl I think i made a mistake because when I try to enable web sharing by checking off the checkbox under system preferences it just turns back off right away. If i go to 127.0.0.1 it doesn't work and neither does the localhost. I could try going through the httpd.conf files to fix it if someone could help me with that but I'd rather just try starting over, so i was wondering if there's a command to restore the web configuration back to factory settings. I know there's one for lion server which is $ sudo serveradmin command web:command=restoreFactorySettings Is there anything similar i could do in Mac OS X Lion 10.7.4??
Thanks

No I haven't, could you explain how that works?? i can try it, it's something like this right? http://support.apple.com/kb/HT5289

Similar Messages

How secure is the default web services?

Just curious how secure the default web services configuration is.
Would mod_security need to be installed?
The server would only host 2 sites but I am concerned about basic security.

Your question is too vague to be answerable.
Any web server security depends largely on what you're doing.
If you're just serving static pages then its pretty secure - there isn't much anyone can do to compromise your server.
If you're running any kind of dynamic content then your security depends on a) the server-side engine you use (e.g. PHP, Java, Ruby, etc.) and b) the competency of whoever's writing your code.
If you're using any kind of database-driven content then your security also depends on your database engine, and your ability to secure your database.
The upshot is that the software as delivered is only as good as how you configure and run it. mod_security (if you take the time to configure it) offers some protection, but it doesn't beat taking the time to code your application correctly.

How to restore the default view setting for FINDER?

I played with my finder's view setting and I set it default to all..
Now I want to restore the default view setting, how is that possible?
Thanks!

Go to your home folder -> Library -> Preferences. Locate the file com.apple.Finder.plist and trash it. Then control-option-click Finder's Dock icon and select Relaunch. All Finder settings will now be back to the OS X defaults.

How to set the default web site for WGM users

Hi,
In Tiger server there was a place to input the URL of the default web page for all browsers when users logged into network home folders. This was really helpful and saved a bunch of bandwidth and class time. Is there any way to do this in Leopard server? If so, please point me in the right direction.
Thanks,
..Tom

Antonio, Thanks! That seems to have worked for Safari. However, we like Firefox too, and I tried to set that up the same way, but was told "can't find a manifest for that app". I wonder if I can copy the Safari list then alter and rename it?
...Tom

How to restore the default setting???

i want to restore the original default setting of firefox ,what is the steps to do that???!!!

Firefox stores user data in the profile, if you want to start off with similar to a fresh installation you can create a new profile. For details of how to do this see http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows

How to launch the default web browser from a java app on MAC

I know, this topic has been brought up over, and over, however I couldn't find info regarding MAC environments. I don't have any former experience with MAC, but now I'm getting desperate for a solution. I need to be able to pop up the default browser showing a certain URL on MAC/OS. Any clue would be appreciated.
thanks,
m. berdan

I wrote libraies that will do this:
http://ostermiller.org/utils/Browser.html
I also keep a list of other resources to help you out:
http://dmoz.org/Bookmarks/D/deadsea/Java_Help/Web_Browser/
Stephen

How to restore the default time and date?

HI i have encountered with a problem very i have got in screen, one date field and input field TEXT Field name i have give as the <tablename-<tablefield>> like ZFIR-DATES reason giving name like this is i want to save the date in a table ZFIR when i click save. When i am clicking save date is storeing but the problem is date is not displaying defaultly.....on the screen
codeing part..
DATE(10) TYPE C.
before output screen no 100
DATE = SY-DATUM.
Thks

The format of the variable on the screen needs to be the same as the global definition - if it's a date field on the screen then you should have something like
data:
g_date like sy-datum. "naming convention g = global
and g_date on your screen as a date-type field, then in your PAI where you store ZFIR
ZFIR-DATES = g_date.
Jonathan

How to change the default operators in sap web ui Search screen?

How to change the default operators in sap web ui Search screen?
For eg. Using advance search option , I have some fields with default operators like equals, contains,is between, is less than and is greater than. I don't need all these operators for this field.
I need only "equals" operator. How do i remove the rest of the operators?

There is a view cluster crmvc_dq where all the standard setting is present related to you r issue. Please try if you can modify that, that way you will avoid the code.
Incase you are not able to make any changes there then in that case you have to redefine the method GET_DQUERY_DEFINITION () of the IMPL class to delete the operators for a particular serach field.
Regards,
Harshit

How to restore the appearance of this message? "Requested an encrypted connection to a page [...] Probability of read data [...] [Optional] Always warn me before [...]" Is disabled by default and now I have it shut off permanently.

Hello!
I have a problem, because when the message appeared:
(original)
"Zabezpieczenia
Zażądano połączenia szyfrowanego ze stroną, która zawiera elementy niezaszyfrowane.
Prawdopodobieństwo odczytania przesyłanych danych przez osoby trzecie jest duże.
[Opcja] Zawsze ostrzegaj przed nawiazaniem połączenia szyfrowanego ze stroną zawierającą elementy niezaszyfrowane."
(in translation)
"Security
Requested an encrypted connection to a page that contains the elements unencrypted.
Probability of read data transmitted by third parties is large.
[Optional] Always warn me before you make an encrypted connection to the page containing the unencrypted parts."
option "Always warn ..." is disabled by default and by chance it shut off permanently.
How to restore the appearance of this message?
Sincerely,
Jadwiga Zabagło

Hello!
I have a problem, because when the message appeared:
(original)
"Zabezpieczenia
Zażądano połączenia szyfrowanego ze stroną, która zawiera elementy niezaszyfrowane.
Prawdopodobieństwo odczytania przesyłanych danych przez osoby trzecie jest duże.
[Opcja] Zawsze ostrzegaj przed nawiazaniem połączenia szyfrowanego ze stroną zawierającą elementy niezaszyfrowane."
(in translation)
"Security
Requested an encrypted connection to a page that contains the elements unencrypted.
Probability of read data transmitted by third parties is large.
[Optional] Always warn me before you make an encrypted connection to the page containing the unencrypted parts."
option "Always warn ..." is disabled by default and by chance it shut off permanently.
How to restore the appearance of this message?
Sincerely,
Jadwiga Zabagło

The default start page has changed, how to restore the previous version?

The original home page was an ever changing design, based around google? The new home page is bland. How to restore the previous start page please.

http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
http://www.google.com/firefox

How to setup the default run page in WAR file

Can anyone please tell me how to setup the default run page in WAR file using JDeveloper? I want the login page to be the default page of the application. Thanks!

This is usually done in an .XML or other configuration file based on the particular web application container you are using.
For example, in Tomcat Java Container, its the following parameter in the /conf/web.xml file:
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
<welcome-file>index.jsp</welcome-file>
</welcome-file-list>
You will need to look at the documentation for your server container.
thanks

How to change the default time?

when you finish the action of dialing ,the CCM system recognize your finish after 10s .How to change the default time in Service Parameters ,which is the detail Parameters ?

Please see the following link for information on configuring the interdigit timeout.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dab26.shtml
Hope this helps. If so, please rate the post.
Brandon

How to change the default color of the selected row

hi all,
I need to know how to change the default color(yellow) of the selected row in a table component.whether i need to change anything in the stylesheet.If so, where should i make the changes in the stylesheet.
thanks and regards,
rpk

The chart colors are being referred to *'palette.cxml'* file in these directories
BI_HOME\web\app\res\s_oracle10\chartsupport
BI_HOME\oc4j_bi\j2ee\home\applications\analytics\analytics\res\s_oracle10\chartsupport
you can change to your custom colors.
Restart OC4J and PS to make the new ones work..
Regards,
Raghu

How to change the default language of form9i?

How to change the default language of form9i? For example, change the language from Spanish to English.
Regards!
Gerald

Hi,
set the NLS_LANG parameter and make sure the language supplement classes got installed when installing the deesigntime or server. If you need to change the language for runtime, set the value in the default.env file - assuming its a web based appication
Frank

How to change the default admin password for IAS/UDDI

Using "OracleAS UDDI Registry" 10g Release 2 (10.1.2)
http://docs.oracle.com/cd/B15904_01/web.1012/b14027/regwsuddi.htm
How to change the default password
ias_admin/ias_admin123
http://xxx.xx.xxx.xx/uddi/publishing

Hello NJ,
I tried your solution and its a very good workaround for the workbooks stored in the Database, but when i open workbooks from file system then Discoverer defaults the export path to the Directory from where we have opened the workbook.
My clients are having most of their workbooks stored in File system & stored at different locations. So i wonder if there is just one common solution if possible?
Thanks

How to restore the default web configuration in Lion

Similar Messages

Maybe you are looking for