How to restore your old music after it has been erased from being synced??

I once had music on my iphone and i synced it on my laptop wth itunes and now everything has been erased!!!
How do I get everything back. I tried adding the music again but nothing it working. i EVEN checked my history of songs played on itunes and has some of my old songs on it but I don't know how to get all of it back??? someone PLEASEEEE HELPP ASAP !!!

Well, the level of pain you are about to experience will hinge on what level of backup you have of the phone. If none, you will soon have a blank, from-factory phone you will have to reconfigure from scratch.
Read here: http://support.apple.com/kb/HT1212

Similar Messages

  • How to fix your iPhone 4 after you have been disabled from trying too many pass codes after the update? I haven't used a passcode in so long I can't remember it.

    I downloaded the new IOS 7 and it asked for a pass code to unlock it when it finished, however, I haven't used a pass code in so long, I don't remember what it is!  I have tried all I have ever used and still no luck. Now my phone is disabled and I can't use my new operating system! Very disappointed!

    Try to connect to a computer with your paired iphone, the run iTunes and Run Restore iPhone

  • My itunes account was set up under an email account that has been deleted. I started a new itunes account but have the same device as with the old account. How do i keep my music thats on my ipod touch from being deleted when i sync it to my new account?

    My itunes account was set up under an email account that has been deleted. I started a new i tunes account but have the same device as with the old account. How do i keep my music thats on my ipod touch from being deleted whin i sync it to itunes after purchasing new music?

    I have the same problem (deleted email account). I think I mistakenly set up an account when I was buying an Apple product online, not realizing that it would be the same ID as my iTunes.
    What is the way to actually contact Apple?
    I have been clicking around in circles for hours! Will I have to pay them to resolve this? I don't have any products still have applecare . . .

  • TS1702 I just had to restore my iPhone.  After everything has been backed up from the iCloud, 4 of my apps (Facebook, Twitter, Pinterest and Instagram) will not comeback.  They are stuck on "Waiting" and I cannot open or delete them.  HELP, please!!!

    I just had to restore my iPhone.  After everything has been backed up from the iCloud, 4 of my apps (Facebook, Twitter, Pinterest and Instagram) will not comeback.  They are stuck on "Waiting" and I cannot open or delete them.  HELP, please!!!

    I just had to restore my iPhone.  After everything has been backed up from the iCloud, 4 of my apps (Facebook, Twitter, Pinterest and Instagram) will not comeback.  They are stuck on "Waiting" and I cannot open or delete them.  HELP, please!!!

  • HT3819 How to resolve Remote error message - "This remote has been unregistered from itunes library."

    I am getting this error message on my iPhone 4 - "This remote has been unregistered from "my itunes Library. Plese select another library."
    This happens whenever I try to use the Remote App with my iTunes Library that is set up with Home Sharing on my iMac and iPhone.
    I have updated the OS software on iMac and iPhone, I follow all the directions for both Home Sharing and Remote set-up, I am using the same wi-fi connection, the same Apple ID and password, I have started over by deleteing the Remote App and then downloading it again, going back and putting in the 4-digit code so my iMac will recognize my iPhone, turning off Home Sharing and redoing that -  Something seems to be blocking my iPhone from connecting to my iMac iTunes.
    What is the solution? Any new ideas?

    I had this problem too with an iPhone 5, but resolved it.  This is what worked for me:
    I turned my VPN setting off (in the iPhone, Settings > VPN > toggle On/Off to Off).  After that, I could connect.  I'm not sure what will happen if and when I need to use a VPN, but for now I'm OK.
    Before that, I did the following, but am not sure it mattered:
    I downloaded and installed iTunes 11, unregistered all remotes (in iTunes: Preferences > Devices > Forget All Remotes), in the iPhone, invoked the Remote app and turned on Home Sharing.  During this process I rebooted my computer and the iPhone a couple of times, but am not sure that mattered either.

  • Maybe this question has been found already, but I have yet to find the answer. How can I restore my bookmarks after it has been deleted from my 'bookmarkbackups' folder?

    So it has been a couple months now since I last cleaned up my bookmarks toolbar. And I could remember a couple of bookmarks tabs I wish I did not delete. I found some articles saying I could try restoring previous versions of my bookmarks from the dates of recent system restore points. But the earliest date I found was of only last week's. I've checked everywhere in my Firefox profile for anything that I could restore to date back into that time, but they too only tracked back as early as last week. I believe the automatic backups Firefox had made during that time has now long been deleted from the system in order to make room for my most current ones. How am I going to be able to retrieve those bookmarks when their aren't any backups available now to restore from?

    If you do not have backups of your bookmarks, either in the bookmarkbackups folder or saved elsewhere, then you can't restore your bookmarks.
    For future prevention: http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

  • How do I download I books after it has been interrupted.? I can't get the I books app to load, How do I download I books after it has been interrupted.? I can't get the I books app to load

    How do I download iBooks after the app was interrupted? I can't get the iBooks app to download

    Sorry, but there is no built-in option to autosplit an exiting project.
    Other than
    writing a custom Automator Workflow or AppleScript to do that programmatically
    or define smart albums or searches for each day, then create a project from each album or search result,
    there is little you can do within Aperture once the project has been imported.
    For an Aperture Newbie I think the easiest solution (uless you already have invested a lot of work into adjusting and tagging the images) would be to
    reexport the gigantic project "Export masters"
    and reimport the exported folder with proper import settings.
    The Autosplit should be turned on
    in the Aperture Preferences -> Import,  Autosplit into Projects
    and during imort in the Import Panel -> Import settings -> Aperture Library Brick -> Automatically split Projects
    Regards
    Léonie

  • How to trace planned order data after it has been converted into production

    Hi, There,
    The planned order has been converted into production order.
    However, I need to trace if this planned order is generated by MRP
    run or created manually. I can't get any planned order info from
    table PLAF. Any input?
    Regards,
    Nancy

    Hi,
    Once fully converted, the Planned Order data will not be available in the Table : PLAF.
    If it is available, then You can have the details with the Time Stamp and User data from PLAF.
    But, the refrence will be available in the Production Order.
    You want to make a Track of the Planned Order details and the Quanity, then you need to have/create Z tables so that the data will be availabe.
    This is how most of the Organizations keep a track of the Planned order data.
    Hope this helps..
    Regards,
    Siva

  • Will Time Machine identify a back up hard drive after main has been erased?

    I went to the Genius Bar a couple of days ago and was told that in order to fix some of the problems I was having I should do a achieve and install (or maybe erase and install I can't remember.) Then use Time Machine to restore all the files on my computer except for the system and library folders (since there is a lot of stuff inside them that has been causing errors.)
    My question is will Time Machine be able to identify my disk after the achieve and install? I looked at the Time Machine Backup from another start up disk and Time Machine just showed up blank. Is that what would happen if I wiped my drive? Or would that only happen if I completely erased the hard drive and not be an issue if I went with the achieve and install?

    The Time Machine disk certainly shouldn't look blank - that could indicate a pro blem with your backups not running when you expect.
    When you look at your Time Machine disk you should see a 'Backups.backupdb' dire ctory which contains subdirectories for each Time Machine snapshot.
    If you don't see these then your Time Machine isn't backing up and you shouldn't  re-install your machine :)
    If you do see that, then you should be OK (as long as the subdirectories cover r ecent dates), in which case you can run the re-install - I'd go for a 'clean ins tall' and use the 'Copy my settings from a Time Machine backup' which is one of  the options after the first boot.

  • HT204053 How can I remove an apple id that has been disable from I cloud?

    How can I remove apple id that has been disable fro my iCloud ?

    You cannot delete an Apple ID. All you can do is stop using it.

  • HT1918 how  can i get the user manual  info back  which has  been  erased  from my  settings  icon  pafe  after  a restore from itunes

    how  can i   get  my user  manual info  back onto  my  settings   menu 
    this  heading  did  not  appear  on the settings  menu following  a  restore  necessitated  bt  a  freezing screen  glitch  thanks

    I'm not entirely sure what you are referring to, there isn't a user manual section in the iPad's Settings app. If you want an iPad then you can either download it from here : http://support.apple.com/manuals/ipad/
    Or if you download the iBooks app then there should be a copy in the ibookstore in it

  • How can I restore my iphone back to factory reset after it has been disabled from trying so many times to unlocked with the wrong passcode?

    My son had place a passcode and don't remember it and he try so many times to unlocked the phone but since he did it so many times and it was the wrong passcode the phone now is disabled, How can I get it to work again?

    Well, the level of pain you are about to experience will hinge on what level of backup you have of the phone. If none, you will soon have a blank, from-factory phone you will have to reconfigure from scratch.
    Read here: http://support.apple.com/kb/HT1212

  • How to re-download adobe software after it's been deleted from your machine (I own CS5.5)

    I bought the production premium suite last year. I had to remove it from my machine to create space until I got more HD space. I want to redownload the suite, more specifically the programs I use most. I have no disk drive in the macbook air I use, hence the issue. I need to find a solution to get this back on my machine. Help!

    You can find the installer on http://prodesigntools.com/tag/ddl

  • How to remove boot camp partion after windows has been deleted

    I have removed windows 7 from my mac book air. however the partition will not be deleted... how can I remove the partition.

    Hi,
    Usually the correct way to remove your Windows partition is to use the BootCamp Assistant again which should give you the option to remove the made Windows partition and revert back to one OSX volume.
    After that's done a reboot of your Mac might be advisable. After the reboot use the BootCamp Assistant again to make the Windows partition and then install the (hopefully correct) version of Windows.
    Only if that's not working (whatever the reason) :
    1) boot your Mac from your OSX install DVD
    2) choose your language and then 'ignore' (cancel) the installation
    3) from the Top Menu (Utilities) start Disk Utility (DU)
    4) in DU click on your harddisk (not any partition) in the left pane (the first item listed)
    5) in the right pane use the 'Partition'-Tab
    6) click to highlight on the ex-Windows partition you want to delete
    7) click on the small '-' Button at the bottom
    That should delete your former Windows partition
    After that's done successfully
    8) Drag the partition separator line until it encompasses the entire drive and then select apply.
    9) Quit Disk Utility
    10) reboot your Mac from your harddisk.
    Since you are 'fumbling' with your OSX partition you should consider having/making a backup of it before trying the a.m. procedure. Just in case.
    Regards
    Stefan

  • How to edit/modify workflow task after it has been completed?

    My workflow spawns a couple tasks and once those tasks are completed, they become non-modifiable. If the user made a mistake by entering wrong details while completing the task and would like to change it later, he cannot do so once he hits the complete
    button. This is happening in SharePoint 2010.
    We were using SharePoint 2007 earlier when this wasn't the case. The tasks could be modified even after they were completed. I would like to have the same behavior in 2010 too. Please suggest how can I do it? There should be some task settings to enable
    modification but I just can't find them. 

    Hi,
    Thank you for your question. I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience. Thank you for your understanding and support.
    Thanks,
    Linda Li
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

Maybe you are looking for

  • Report Error whiloe opening(Urgent)

    Hi All, Users are facing different kind of error while running the report in Webanalysis 9.3.1 Error:- 1003 Native : 502 Invalid Object Path Specified App/Appname/cube/cubename/Dim/Time but when the same reports are runned with admin ID it was openin

  • A question about Panasonic Viera TCP46S2 ,wireless capatibility?

    I bought a Panasonic Viera 46" TCP 46 S2 from Best Buy in June 2010. I want to know if I can watch TV from my lap top wireless instead of using HDMI cable? If TV can be wireless, what wireless adapter do I need to purchase?

  • F.Spec for new excise invoice format development

    Dear Friends Can anyone pls tell, what are the details/info to be included for drafting an F.Spec,required for new excise invoice development? The new format is given in an XL sheet. Any guidance on how to prepare an FSpec for the same? Any guidance/

  • BPEL database adapter pooling rooling back transaction

    Dear Forum Members, I made a quick example of BPEL retrieving data from DB adapter which is pooling a database, transforms the data and generate a file. The process executes, but at the end is throws the following fault: The transaction was rolled ba

  • Error from the seagate Crystal Reports ActiveX Designer

    Hi guys, I get the following message when I running a report application based on Web. The Message is as following: The Error Message was Error detected by database DLL from Seagate Crystal Reports ActiveX Designer Internet Explorer has encountered a