How to restrict a user from using the transaction code SU01?

How can I grant a profile to a user with the profile SAP_ALL except running the transaction code SU01?
I know how to lock the transaction code using SM01 but is there any other way to do it.

Go to S_TCODE
Double click on it and give the combinations like        A*  -   X*
                                                                             SU00
                                                                             SU02 - Z*
                     Try this one definately it will work.

Similar Messages

  • How do I stop users from using the standard inbuilt VPN connection in Windows

    We have a UAG Portal setup to check the security of users computers etc then if it is all correct they are presented with the log in and once logged in the are connected to the corpirate network via a SSTP connection.  The all works fine but the issue
    I have is users can bypass all the checking but just going into network connections on their local computer and creating a SSTP VPN connection, like on this webpage http://blogs.technet.com/b/tugait/archive/2011/10/12/how-to-publish-a-vpn-sstp-using-your-uag-in-a-https-trunk.aspx
    Any idea how to stop users being able to do this and forcing them to use Internet Explorer?

    Found my answer on this page  http://technet.microsoft.com/en-us/library/ee809077.aspx 
    "To enforce Forefront UAG portal authentication, do not set users dial-in properties to Allow
    access."

  • Apps that arbitrarily restrict which users may use the App, such as by location or carrier, may be rejected

    Hello,
    I have an inquiry, this section:
    Apps that arbitrarily restrict which users may use the App, such as by location or carrier, may be rejected
    We have an mBanking app to be built and the Bank is insisting on forcing a mandatory update when there is a need
    and the user should be restricted from logging in in such case (as a security update or important bug fixes).
    Does the above fit in what will be rejected? Will the application be rejected in such a case? if so are there any workarounds?
    Thanks
    nsawaya

    No, no, and no.
    Sorry, but this is Apple we’re talking about here.
    Bob

  • How to disable other users from changing the status

    Hi,
    The status entry field can be changed irrespective of ownership in Documents.
    I was able to change the status on the document created by other user.
    Example: The status of document was In-Work. The document owner was X. But I was able to change it to Inspection Check.
    How to disable other users from changing the status?
    Regards,
    Shashi

    This is a frequently discussed topic.Please use the search feature.It has been discussed in [previous posts|CV01N: Filter documents by role; in various contexts.
    Regards,
    Pradeepkumar Haragoldavar

  • Is it possible to prevent users from using the ''Purge'' option from the ''Recover deleted items'' in Office 365?

    Hi,
    After speaking with a Microsoft engineer over the phone, I've been told that there is no way to prevent users to go to their OWA and manually Purge specific items from the ''Recover deleted items''. The Microsoft tech told us to place the desired mailboxes
    on a litigation-hold and that all data will be recoverable... but only from the time you place the mailbox onto Litigation-Hold and previous items, which doesn't take effect for new-coming emails. 
    1- From what I understand, any new items coming in the mailbox after the Litigation-Hold is put in place will still be ''purgeable'', right?
    2- Is there a way (PowerShell, Security group, etc.) that can prevent a user from using the Purge option?
    We are very surprised that there is absolutely no thread that talks about this issue, which in our opinion, is a major legal and security flaw from Office 365. This is a main concern for us to actually go with Office365. For instance, this means that at
    any given time, if a user exchanges emails with a competitor, they can manually purge emails sent and receive as soon as it is sent/received, even after Litigation-Hold is in place.
    Thank you for your reply and let us know if you have more questions.
    Normand Bessette, IT support technician, Newad Media

    Thank you for the reply.
    Is there still a way to prevent users from using the Purge option, like with a Powershell script to disable Purge?

  • How do I stop Mavericks from using the Internet, I have a DATA PLAN LIMIT!

    Since installing Mavericks on our 2 iMacs our DATA PLAN is overused. Over 1.5 to 2.5 GB PER DAY! This is unacceptable!
    How do I stop Mavericks from using the Internet, I have a DATA PLAN LIMIT!
    HELP!

    Have you seen this thread…
    https://discussions.apple.com/message/23826437#23826437
    The short story is that the new 'certifcate checking' system could be downloading large amounts of data, you can turn it of as follows…
    clockworkapps wrote:
    Turning off CRL & OCSP checking in the Certificates Preferences in Keychain Access solved the problem.
    You can do as others have done, install Little Snitch & use the Network Monitor to view what is happening, that thread has some good advice. http://www.obdev.at/products/littlesnitch/index.html
    @Topher, Activity Monitor is a bit pants for tracking processes that respawn or just go away (I assume its because it's an on-demand job, have you got a nice article on 'mach services', Linc confused me !? ).
    ocspd seems to do that in my limited testing,
    Little Snitch is the easiest way to monitor & you can get away with the free demo for long enough to test if funds are tight.

  • How can l block users from backing dating transactions

    1. How can l block users from back dating transactions in SAP B1. It was discovered that, in production dept there is this allowance given to them to keep producing for the previous month in the new month; this according to line staff is to enable them meet up their monthly target, after a meeting with the management it was resolved to block that right of backdation of enteries. how can l  correct  this.
    2. How can l change the decimal places backward in the general settings of administration of SAP B1( iniatially it was set to be 5 under Quantity now want to correct it to 3 how do l go about this).
    Joel

    Joel,
    By forum rule, one question for one thread.  I will answer you the second:  If you are using 2007 version, the option to decrease decimal place is not available.  Check this thread to know more:
    Re: REDUCE NUMBER OF DECIMAL PLACES
    Also note: this forum is just for B1 system administration.  Please post it on the main forum.
    Thanks,
    Gordon

  • How to get default values while using the transaction "BP"

    Hi Group,
    I have a query on how to get default values while using the transaction <b>BP</b>?
    The thing is:
    when I enter into the transaction "BP", I need to see some default values to some of the input fields in the screen.
    how can I achieve this?
    So please kindly let me know the procedure to achieve this.
    Thanks & Regards,
    Vishnu.

    Hi,
    The events of BDT can be used to default some fields on creating a partner.
    For this create a function module for ISDAT. attach that event in BUS7.
    In the ISDAT funtion modulethe following code should be used.
    For example to set the nationality:
    I_BUSDEFAULT-NATIO = 'DE.
    CALL FUNCTION 'BUP_BUPA_FIELDVALUES_SET'
    EXPORTING
    i_busdefault = I_BUSDEFAULT
    Regards, Smita.

  • How to prevent a portal user from using the BEx Analyzer ?

    Hi,
    we have different type of users : most users may use the portal as well
    as the analyzer ;
    we have one special user with extended authorizations : this user
    should use the portal , where he has a limited set of queries to run
    with hardcoded filters ==> this user should not be able to use the
    analyzer however, since he then would be able to call all other queries
    by using the find function ;
    how can we make sure this user cannot use the analyzer , using SAP
    authorizations ?
    best regards,
    Erwin Van Giel.

    Hi,
    if I remove the complete S_RFC authorization for the user then the BEx Analyzer cannot connect anymore to the BW system, but neither can the user run reports from the portal : it needs the S_RFC with 'SYST'.
    If I only remove the RRMX from the S_TCODE and from the S_RFC, it does not prevent the user from starting the BEx Analyzer and connecting to the BW system. It only stops the user if he would start the RRMX transaction from within an SAPGUI session.
    Perhaps there should be a value in the S_RFC that allows connections from the portal but not from the BEx Analyzer .... ?
    so not solved yet ....
    best regards,
    Erwin.

  • How to prevent multiple users from updating the same data in coherence

    Hi,
    I have a Java Web Application and for data cache am using coherence 3.5. The same data maybe shared by multiple users which maybe in hundreds. Now how do I prevent multiple users from updating the same data in coherence i.e. is there something in coherence that will only allow one user a time to update. If one user is in a process of updating a data in coherence and some other user also tries to update then the second user should get an error.
    Thanks

    I have a question on the same line. How can I restrict someone from updating a cache value when I a process is already working on it. I tried locking the cache key but it does not stop other process to update it , it only does not allow other process to get lock on it.

  • How to restrict some users from viewing a screen of standard transaction

    Hi All,
    I need to restrict certain user ids from viewing the 'Payment Transactions' screen for the below mentioned transactions.
    FK01, FK02, FK03, MK01, MK02, MK03, XK01, XK02, XK03
    The Basis consultant has tried to configure it. However its not working. So need to find other solution.
    For all transactions other than FK01, MK01, XK01 (create vendor), the BAdi GOS_SRV_SELECT is called before the payment transaction screen appears. But for transactions FK01, MK01and XK0, no such BAdi is there.
    Also I'm not able to figure out how to restrict that particular screen using Badi GOS_SRV_SELECT. What will be the service name for this?
    Please help !!!
    Thanks in advance,
    Radhika

    hi,
    u can do this using user exits.
    identify the appropriate exit for ur transaction and thn put condition like
    if username = ...
    loop at screen.
    hide..
    endloop.
    i was just trying to give u some hint .make it to ur best.
    reward if hlpful.

  • How do I stop iTunes from using the cloud?

    I use iTunes primarily for listening to podcasts.  I recently upgraded to version 11.1.
    Now, it used to be that I'd refresh podcasts, download the subscribed ones, listen to them, delete them. done.  I just opened iTunes and under one of the podcasts, there were about a hundred old ones; I used to be able to show everything on one page, now I have to scroll 4 or 6 pages to see what I want.  The "new" podcasts have a little cloud icon, so I guess that's where they are, or downloaded from.
    Two questions:  how do I delete these files, and how do I stop from using the cloud for podcasts?
    (This is a repeat question, because SoonerDoc1 marked it as solved, and it's not)

    That doesn't fix it as the podcast with the cloud logo show up as/in unplayed, I subscribe to CNET First Look Podcasts, some download and some don't download but have a cloud logo. Seems very random. iTunes is a badly written application that is getting worse after every new release.  If iTunes doesn't improve soon I'll downgrade to iTunes 10.7 which was just about use-able. for the second time.

  • How to restrict a user from deleting a PO

    Dear All,
    I have to restrict some users from deleting a line item in PO. They will be authorised to create & change the PO but they must not be able to delete the line item.
    Further it would be more helpful if it is possible to restrict them from deleting one perticular type of  PO(ex-Capex PO). They can change a capex PO but can not delete it.
    Any of the answars will be highly appreaciated.
    Regards
    Rutabhadra Panda

    Hello,
    Speak to your basis guy, put if you have created Capex PO as a particular document type, then maintain authorisation object M_BEST_BSA (Document Type in Purchase Order) and activity 06 delete.
    You may find that delete is still possible through activity 02 change, so you might need to maintain different roles depending on what you need.
    Thanks.

  • Is there a way to prevent a user from using the graph cursor legend to delete a cursor?

    I would like to have 2 cursors on a graph that can't be deleted by the user.

    Hi Dennis,
    I'm having this problem as well, and found your post. Are you referring to the Enabled State of the entire graph?  If so, this prevents the user from moving the cursor at all while the VI is running, which, of course, defeats the purpose of having a cursor at all.  Ideally, I would like to show the cursor palette and disable it's run-time shortcut menu.  This doesn't appear to be possible.   One workaround would be to hide the palle and instead include some indicators that show the cursors' values.  I'd prefer to show the palette to keep the program simpler.
    Any other solutions?
    Thanks,
    Alan
    Alan Blankman, Technical Product Marketing Manager and LabVIEW Developer
    LeCroy Corporation
    800-553-2769 x 4412
    http://www.lecroy.com
    [email protected]

  • How find out which user is using which company code?

    Hi Gurus,
    I am having more than 500 users in Production System.I need to find out which user is using which company code?I can get the roles and users separately from two different SAP tables.
    Is it possible to get it from a single table or Tcode?
    Best Regards,
    Rahman

    Hi,
    Thanks for the update.Yes I tried with SUIM.But I was unable to find any clue.
    Regards,
    Rahman

Maybe you are looking for