How to restrict attachment of inactive user IDs for forwarding document.

Dear All,
We have some temporary IDs in the system which is now inactive in the system. Now in some applications where users select user IDs at their own for forwarding certain document to someone. Erroneously the sometime select the in active IDs. Which result in non delivery of the document.
Is it possible to rectrict selection of inactive user IDs?
Regards,
Abdullah

Hi
Try to look at infotype 0105 subtype 0001 for getting active users.
Ideally all these ID should be active
if not then they should be another check for Employment Status '3' from Infotype 0000
Thanks
RAjdeep

Similar Messages

How to remove User IDs for deleted users from the Disk Quota list

Hello,
We have a computer lab setup with an Xserve managing 15 stations in the lab. Users are setup with networked home directories and quota's are setup on the drive containing the home directories to limit users' storage.
The user account and the quota limit are setup with Workgroup Manager. When a student has been gone for a while and we are sure they no longer need the account we delete their account within Workgroup Manager and move their Home folder to the trash.
When viewing disk usage in Server Admin (by selecting the volume and clicking the Quatas tab) user ids for deleted users are listed and it still shows the disk usage and quota settings for the user.
How can I remove theses user ids from the quota list?
Any help would be appreciated.
Brian

I would restore User's file structre back to normal just by copying from standby user?
Did you mean copy files to a new user profile? If so, hope this link can be helpful for you
http://windows.microsoft.com/en-in/windows/fix-corrupted-user-profile#1TC=windows-7
For the unknown user, as you said, it's probably a user account from second OS or
action. If you're annoying about this unknown user, then you can remove all occurrences of granted rights to the specified SID with this command icals [/remove[:g|:d]] <Sid>[...]] [/t] [/c] [/l] [/q]
http://technet.microsoft.com/en-us/library/cc753525.aspx
Yolanda Zhu
TechNet Community Support

How can i set up multiple user accounts for my new ipad mini?

How can i set up multiple user accounts for my new ipad mini?

The iPad mini is basically a one user device. There are no Accounts. You can set up restrictions so that only you can do certain things.

How to restrict the change access in CRM for OLTP orders

Hi Guru's,
Please let me know how to restrict the change access in CRM for the orders that are created in ECC. The ECC orders will only for display in CRM but not for change,
We have the orders that are created in ECC, it will flows to CRM and should restrict the access to get in to the change mode in CRM but as of now CRM system is allowing change mode for ECC orders and ending up with errors.
Is there any additional middleware parameter that needs to be added to SMOFPARSFA table to get this functionality! Please advice! Thank your for your help.
Regards
Suneel

Hi.
You can use the PFCG role to control if the user is able to create, change, delete or only display a business transaction type.
Regards.

How can i use 2 different apple ids for imessage and facetime on 1 ipad?

How can i use 2 different apple ids for imessage and facetime on 1 ipad?

Do you mean can you use one Apple ID for FaceTime and one for iMessage? You should be able to. Or, do you mean, can you log into iMessage (or FaceTime) with two Apple IDs at once? No.

User ids for customers

Hi,
I have a scenario in which I will be developing a web dynpro application where the Customers and Vendors will login and update the information regarding our orders.
Now I donu2019t want that the customers or vendors accesses each other information, for that purpose I need to give them different user ids. Purchasing user ids for the different customers in production will be a costly affair.
Is there any other solution which you can provide us so that we donu2019t have to spend loads just to update the information from our customers?
Cordially,
Danish

Hi Danish,
Rather than creating a web dynpro application, create an interactive adobe form and mail it to the vendors/customers. Which will serve your purpose.
Regards,
Ravi

How to add a default user group for multiple document type's?

Hi,
I am trying to add same default user group for different document types when MA is created. Is there any way to setup using a single "Document Security Template"? Or I need to create different templates for different document types?
Please confirm.
Thanks,
Saloni

Hi Saloni,
Based on what your specific requirement, it might be easier to do it with scripting.
If you are doing it using Document Security Templates, you would have to create a Document Security Template for each of the 6 MA types and assign the default group. Create another one and leave the Document Type field blank, so it will apply to the other 4 MA types that don't have a default group.
Regards,
Vikram

User exit for FI document

Hi All,
I need a user exit for FI document posting.
My purpose is based on types of G/L accounts i need to add line item data to FI document.(i.e.,inserting into BSEG table )
Can you please suggest me the user exir.
Thanks and regards
Praveen

Transaction Code - FB01                     Post Document
Exit Name           Description
F050S001            FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002            FIDCC1: Change IDoc/do not send
F050S003            FIDCC2: Change IDoc/do not send
F050S004            FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005            FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006            FI Outgoing IDoc: Reset Clearing in FI Document
F050S007            FIDCCH Outbound: Influence on IDoc for Document Change
F180A001            Balance Sheet Adjustment
FARC0002            Additional Checks for Archiving MM Vendor Master Data
RFAVIS01            Customer Exit for Changing Payment Advice Segment Text
RFEPOS00            Line item display: Checking of selection conditions
RFKORIEX            Automatic correspondence
SAPLF051            Workflow for FI (pre-capture, release for payment)
If you know tcode then you can find out user exits associated with the same with the following code:
*& Report ZUSEREXIT                                                   *
*& Finding the user-exits of a SAP transaction code                    *
*& Enter the transaction code in which you are looking for the         *
*& user-exit and it will list you the list of user-exits in the        *
*& transaction code. Also a drill down is possible which will help you *
*& to branch to SMOD.                                                  *
REPORT zuserexit NO STANDARD PAGE HEADING.
TABLES : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
TABLES : tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR'
                   AND object = 'PROG'
                   AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
    SELECT SINGLE * FROM trdir WHERE name = tstc-pgmna.
    IF trdir-subc EQ 'F'.
      SELECT SINGLE * FROM tfdir WHERE pname = tstc-pgmna.
      SELECT SINGLE * FROM enlfdir WHERE funcname = tfdir-funcname.
      SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR'
                                  AND object = 'FUGR'
                                AND obj_name EQ enlfdir-area.
      MOVE : tadir-devclass TO v_devclass.
    ENDIF.
ENDIF.
SELECT * FROM tadir INTO TABLE jtab
                WHERE pgmid = 'R3TR'
                 AND object = 'SMOD'
               AND devclass = v_devclass.
SELECT SINGLE * FROM tstct WHERE sprsl EQ sy-langu
                              AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
       20(20) p_tcode,
       45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
    WRITE:/(95) sy-uline.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 sy-vline,
           2 'Exit Name',
          21 sy-vline ,
          22 'Description',
          95 sy-vline.
    WRITE:/(95) sy-uline.
    LOOP AT jtab.
      SELECT SINGLE * FROM modsapt
             WHERE sprsl = sy-langu AND
                    name = jtab-obj_name.
      FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
      WRITE:/1 sy-vline,
             2 jtab-obj_name HOTSPOT ON,
            21 sy-vline ,
            22 modsapt-modtext,
            95 sy-vline.
    ENDLOOP.
    WRITE:/(95) sy-uline.
    DESCRIBE TABLE jtab.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST   SCREEN.
*---End of Program.
I hope it helps.
Best Regards,
Vibha
*Please mark all the helpful answers

How to restrict manual setting of User Status?

Hi,
I have created an User Profile where a particular User Status is "set" based on the Business Transaction "Release".
However, we are also allowed to set this User Status manually without carrying out the Business Transaction "Release".
How do I restrict manual setting of those User Statuses that are "set" based on a Business Transaction?
Raj

Pete,
I did read that post. But it is about providing authorisation to set a Status for an User.
The case I am referring is, an User Status is auto set by a Bus. Trans Release. But I am also permitted to set the status transition manually. This way, Users tend to skip Releasing the Service Order. This is affecting upstream processes.
Is there a way where we can restrict manual setting of User Statuses that have to be normally auto set by Bus. Transactions?
Raj

How can I delete old & inactive user account datawith a script?

there is a mac 10.4 server that has many old user folders. too many to delete one by one. there is no grouping of users. all of them are in the /user folder
I want a script that will check the folders in the /user direcotry against the OD users. If a user for that folder does not exist then it will rm or move to trash or an /inactive users or /olduser folder.
thanks for any help
it is the same question in this thread but was not answered really well at all
http://discussions.apple.com/thread.jspa?threadID=1081185&tstart=0

Well, the problem with rm the folder is that it still leaves data hanging around (profile, home drive, etc.) I was really hoping for something that would sweep up everything from people that are no longer in the OpenDirectory database.
Anyway, I'll close this question by saying thanks for trying.
Later...
Richard

How to restrict workitem of a user to the substitute

Hi,
I am using standard functionality of the substitute in sap business workplace.
My problem is when i am assign a substitute to a user for a period say 2 days,then all the workitems of the original user which were invoked in the past are also visible to the substitue.
Now my requirement is to restrict the substitute from seeing all the past workitem and to allow current workitems.
Thanks & Regards,
Ramesh.

Check this link
BADI or USER-EXIT for Business Workplace
Make use of table HRUS_D2
and FM
SAP_WAPI_WORKITEM_RECIPIENTS
to filter the workitem.
Thanks
Arghadip

How to restrict the EBS end users to run only two same reports at a time?

Hi,
We are using EBS 12.0.6 and database 10.2.0.3.
Is it possible to restrict the end business users to run only two reports at a time?
OR
Is it possible to restrict the end business users to run only two same reports at a time?
Thanks.

Is it possible to restrict the end business users to run only two same reports at a time?It is not possible.
You can either make the report "incompatible" to itself (this means only one user in your company can run it at a time)
Or not make it incompatible. (That means any user can run it any number of times)
Incompatibility is a way of specifying which requests cannot be run under which circumstances.
See http://download.oracle.com/docs/cd/A60725_05/html/comnls/us/fnd/incomp.htm
You can use Hussain's suggestion to use Concurrent: Active Request Limit profile. You can set this profile value at each user level. But if you decide to set it at global level, remember to keep it a higher value for sysadmin kind of users that run scheduled jobs.
Hope this helps,
Sandeep Gandhi

How can I stop firefox from auto saving user ids for various websites? I do not want them to be remembered for security reseasons

I do not wish to start typing my user id for a website and it automatically coming up as a choice since it has been remembered from a previous attempt. How can I delete firefox from remembering it so I just always type it myself?

The [[Form autocomplete]] article has information on deleting saved entries and preventing the browser from remembering form entries in the future.

KB21N, KB11N:how to restrict by cost centers users can post to

Hello Gurus,
SAP is not restricting Cost centers which can used for internal activity allocation KB21N and re-posting of primary cost KB11N.
Users should only be able to post to the authorized cost centers with the standard hierarchy.
Unfortunately KBXXN transactions are not checking K_CCA authorization object , which other-wise could have been used to restrict user based on responsiblity area ( cost center group)
Any one came across this scenario, i check all relevant OSS notes related to KB21N . Let me know if i missed any OSS notes
regards
SAPfreek

Hi,
If you start the transaction KB**N (including KB11N) you can only use restrictions on the controlling area by using the authority
object "K_VRGNG". (Please review T-cd:SU24 for the transaction)
The authority objects "K_CCA" and "K_ORDER" allows to use restrictions on single cost centers and orders but these two authority objects are not checked if you use one of the transactions KB**N It's not possible to use any other restriction than the controlling area for one of the above transactions.
There are two possibilities to extend the authorization checks in KB**N:
a) using the validation tool:
   An validation is nothing more than a check whether some customized   conditions are fullfilled or not. If not, the system will send a   self defined message ( Error, Warning, Information ).
   You can find some explanation about validations in our documenation   and in the reference - IMG under:
   Controlling - Controlling General - Account Assignment Logic.
b) using the user-exit (Enhancement COCCA002 and COCCA001)
   See note 375725 for additional information
The enhancement is called up by function module K_ORGUNIT_AUTHORITY_CHECK. Because the standard authorization object
K_ORGUNIT does not at that point have any fields, this enhancement is the only one executed.
Please also review note 370082 for information on the concept of the responsibility area in authorization.
regards
Waman

How to restrict the Copying/printing of the file from document

Hi..
Case:
1. I have a document number it has three files in it.I want to locked the files from priniting and copying but not from opening/displaying.
2. I am using content server for storing the DMS documents.How to restrict the number of attachments that can be uploaed in one document number?
3.How to restrict the maximum size that can be uploaded against one document number?
Sandip

Hi Sandip,
1. I have a document number it has three files in it.I want to locked the files from priniting and copying but not from opening/displaying.
In DC30 transaction,in Workstation application for network,disable the print option.Will ensure users will not be able to print the originals.
2. I am using content server for storing the DMS documents.How to restrict the number of attachments that can be uploaed in one document number?
See if your ABAPer can use the BADI 'DOCUMENT_MAIN01' with method 'BEFORE_SAVE' to handle this check.
3.How to restrict the maximum size that can be uploaded against one document number?
Believe you are using kPro as a storage option.If this is the case,then there is no setting available to limit the file size for upload.See if your Basis guy can set an upper limit for file size in IIS setting for your content server.
If you are using SAP DB as a storage option(not recommended though),then use the field File Size in DC10 transaction,Define Document Types to effect a file size limit.
P.S. Would appreciate incase you could close the threads which have been answered satisfactorily.
Regards,
Pradeepkumar Haragoldavar

How to restrict attachment of inactive user IDs for forwarding document.

Similar Messages

Maybe you are looking for