How to Restrict Creation of Infotype Record for Certain Org Units?

Dear All,
Requirement:
Org Unit 1 does not have overtime. Even the employee works overtime, they will not get overtime compensation.
One of the option is to disallow the creation of IT2005's record for all the employees in Org Unit 1.
Is it possible to do this through standard SAP?
Thanks a lot.

Hi,
The best way to control this will be with Authorizations so that people belonging to one Org.unit should not have IT2005 mantainence.
Let me know if u have any concerns on this.
Thanks
Swati

Similar Messages

  • Restrict creation of inspection lot for certain work centers

    Hi
    My client needs to restrict the creation of inspection lot at certain work centers although QM is active for all material processed in these work centers.
    I am using the  function module 'EXIT_SAPLQAAT_002' of QAAT0001 for this purpose. Z04 inspection type ( with Post to insp stock) is maintained for all these material.
    A different Z table is there , where material-work center combination is maintained for which no inspection lot is required.
    Logic provided so that system searches Material-Work center from production order then compares it with the Material-Work center combination with the maintained Z Table.If both found same then no inspection lot will be generated.
    But an error message (Change the inspection stock of material XXXXXX in QM only) appears for all those material while doing confirmation in CO11N . Hence system does not allow to complete confirmation for those material where QM is active.
    Please suggest if i am using the correct Exit or any further improvement is required.
    Thanks and regards
    D Mohanty

    Hi
    Actually the issue is resolved now.The problem was with coding where we were using Table-AFRU for reading prod order details.But AFRU does not consider fresh orders for which it was replaced with AFKO.
    Also the Z table must be maintained as Plant-Material-Work center combination prior to go for any order confirmation.
    Thank you all who have gone through the post , hope this will help those who have to map the same scenario at their end.
    Regards
    D Mohanty

  • Two Chief Position for an org unit

    HI,
    In PPOM I am unable to view two chief position for an 'X' org unit. I have checked in other 'Y' org. unit ( having similar attributes) and there two chief positions are displayed. The validity period and other relationship in both the org units are same.
    Can any suggest on how the two cheif positions are displayed for X org unit. (The client is stating that when Y org unit can display two chief positions then why not X org unit).   
    Thanks,
    Sai

    Hi Sai -
    What is the error or message that you are getting?
    By default SAP allows an Org Unit to have multiple Chiefs assigned to it. Are you able to manually assign the relationship to that position via PO13?
    If you send over the message, then I can further assist.
    Thanks,
    Nick

  • New sales attribute for an Org Unit

    Dear Experts,
    how can I add new (sales) attributes for an Org Unit in the Org Model?
    Thanks in advance!

    Hi Joe
    Yes you can new attributes if you wish to add in Org.mgt
    if you want more details Reply back to this , i will send you all the details
    Regards
    Vinay

  • Error during creation of info record for pipline material.(Urgent)

    Hi All,
    We are getting the following error during creation of Info record for pipeline material
    " Material XXXXX is not a pipline material"
    we have checked the material master  and found it is a pipeline material.
    Kindly advice on the same.
    Help in any form will be rewarded.
    Best Regards
    Arihanth

    Hi Arahanth,
       The steps u need to check are;
    1) The Material Type ( If standard then it is PIPE or if defined own Material Type check the settings once preferably in special material type a tick at pipeline mandatory)
    2) when u create the info record (ME11) ensure the info category is selected as pipeline.
    Hope its clear to u
    if solved do reward me points
    Regards
    Anil Thai

  • How Can I Know All History Record For Any Form ??

    How Can I Know All History Record And Updates About Any Form By User Names And Times Or What About Log Files ??

    Duplicate post.
    How Can I Know All History Record For Any Form ??
    Re: How Can I Know All History Record For Any Form ??

  • How not to Copy PD infotype records while copying an object (eg org unit)

    Hi Experts!
    Is there a possibility exclude an infotype from copying while we copy an object for example org unit (o) or position (s)?
    We have a custom infotype that holds unique data for this particular object and should not be copied automatically, but unfortunately when we copy for example a position, this record is also copied automatically.
    Please Help!

    Hi,
    Please follow SPRO>Personnel Management>Organizational Management>Hierarchy Framework>Exclude Infotypes when Copying Internal Objects and make the desired entries for object type and the custom infotype.
    Go through the supplied SAP documentation on this IMG activity for a better understanding.
    Hope this helps.
    Donnie

  • How to find all the infotypes used for LSO?

    Folks,
    Can anyone help me on how to find the related infotypes used for LSO?
    Thank
    S

    Hi,
    In addition to puneet's information:
    Training and Event Mgmt  infotypes:
        Prices (Infotype 1021)
        Availability Indicators (Infotype 1023)
        Capacity (Infotype 1024)
        Depreciation Meter/Validity (Infotype 1025)
        Business Event Info (Infotype 1026)
        Site-Dependent Additional Info (Infotype 1027)
        Address (Infotype 1028)
        Business Event Type Info (Infotype 1029)
        Procedure (Infotype 1030)
        Mail Address (Infotype 1032)
        Name Format (Infotype 1034)
        Schedule (Infotype 1035)
        Costs (Infotype 1036)
        Billing/Allocation Info (Infotype 1037)
        Business Event Blocks (Infotype 1041)
        Schedule Model (Infotype 1042)
        Demand (Infotype 1060)
        Web Link (Infotype 1061)
        Knowledge Link (Infotype 1062)
        Business Event Group Info (Infotype 1063)
    Thanks,
    Anil.G

  • User exit or badi to restrict PROO in Sales Order for certain sales organisation

    Hi SAP SD experts,
    I would like to know the User exit or badi to restrict PROO in Sales Order for certain sales organization. This can be done by making condition type as D but will affect all sales org and we to restrict for a certain sales org only.
    thanks,
    SG 

    Kindly  explained  how  you have  solved  others  may benefit..
    regards
    Arunkumar

  • For an Org Unit, how do we get all Reporting Org units (Also employees reporting to the sub org unit) & Employees ?

    Hi Experts,
    I have a very common requirement in SAP HCM ABAP development.
    For an Org Unit, how do we get all Reporting Org units(Also employees reporting to the sub org unit) & Employees ?
    I have tried using RH_STRUC_GET_MULTIPLE_ROOTS and RHPH_STRUCTURE_READ, but the evaluation path is insufficient to get all objects under it. I tried with both O-S-P and O-O-S-P evaluation paths and as per some constraints, I can’t create a customized evaluation path for a reason.
    I am using PNPCE database for user selection screen and user would be advising the Org unit. I even referred the standard transaction ‘S_AHR_61016495’ which is using PCH logical database.
    I would really appreciate if anyone could provide a solution for this. (Rewards guranteed )
    Kindly help.
    Thank you.
    Regards,
    Mahesh Konade

    Hi Alexandre,
    Although I could not respond in time, thank you so much for your prompt reply.
    I had used the same RHPH_STRUCTURE_READ and passed the appropriate values to it, but it did not populate the required results. I cross checked the results manually, may be some relations issue. But later I tried using RH_STRUC_GET_MULTIPLE_ROOTS and it worked fine.
    Meanwhile I had done a workaround with PCH and RH_STRUC_GET and it served the purpose of getting all the Org units, it’s reporting sub-org-units, positions and persons (The deepest structure from the root org unit advised on selection screen).
    The solution I used is, I captured the org-units advised on selection screen by user using PCH logical database and then by looping on sub-org units reporting to the main org-unit I populated related positions and persons holding them and assigned it to the PNPCE logical database.
    Thank you so much for the help.
    Regards,
    Mahesh Konade

  • How do i permanently block pop ups for certain sites

    how do i permanently block pop ups for certain sites

    According to this thread > http://www.techsupportforum.com/forums/f65/blocking-individual-web-sites-on-safa ri-226175.html
    You can use the Terminal app to block individual sites but be aware, unless you are familiar using Terminal, best to click your Apple menu  (top left in your screen) then click Block Pop-Up Windows from the drop down menu instead.

  • Employee works for 4 org units and want to distribute the cost to 4 cost ce

    Hi Experts,
    I am in the implementation phase, requirement gathering.
    I have scenerio where, Employee works for 4 org units and want to distribute the cost to 4 different cost centers.
    so that I can be able to find the exact cost occured for each Org unit.
    Please let me know how to map this in SAP?
    P oints will be rewarded fully
    Kindly dont post if you are not sure of your solution friends.
    Thanks
    Jay

    Hello,
    Infotype 0027 is the standard solution for multiple reporting / multi tasking in SAP.
    but also check which org unit he will be primarily assigned.
    Regards

  • Generating BP for each org unit

    hi friends ,
    when creating the org.model for each org.unit one BP is generated. wt is the purpose of generating BP for each org.unit.
    where we can use this one? pls guide me.
    thanking u in advance.

    hi there
    the purpose behind creation of BP for each org unit is to use that for the working inside the org
    see the BPs are created inside the system using three:
    person
    group
    org
    and then we differentiate them on the basis of the roles
    so when BP is generated for particluar org it assumes the specific role and later on the same role will work according to the rules determination inside the org
    else if you want to specify the attributes inside the org ,how would you be able to work around in the absence of BP
    see the thumb rule of CRM is that each and every iondividual is BP here ,so same goes here that if org has to fucntion then employees and customers should be there inside it so that something goes determined
    and if BPs are not there how would u achieve that
    guess i have cleared the doubt
    best regards
    ashish

  • Profile for an Org Unit.

    Hi Team,
    Is it possible to maintain Profile (PD) for an Org Unit. I would like to maintain location preference for at Org Unit Level.
    In this process I would like to maintain that for each Org Unit Level. The standard functionality doesnt support for this. Is there any Custom developement or configuration to make this happen.
    Regards
    <i><b><u>Sam</u></b></i>

    Hi Sam,
    If you are very sure that theres no standard functonality then you may follow these steps.
    1. SAP has a object type "F" as Location.
    2. Create Objects for the Object type F.
    3. Create ZRelation ship for e.g. A901 (Works for location) and B901 (Is location for).
    4.Maintain the relationship for the Object Type in Transaction Code "OOVK".
      Note: create 2 records for F -> 0 as B901
                                            O -> F as A901.
    5. Now you are ready for mainitaining the relationship between the 2 object type Orhunit and Location.
    ~Hope this Helps you...
    Bhawanidutt.

  • How many cost centers can we assign to a org unit

    can anyone pls tell me tht How many cost centers can we assign to a org unit ??
    thanks
    waiting for reply asap

    Hi,
    As mentioned above the common is to assign one cost center. You will see it in IT0001. But in case you need mor cost center to be assign to one employee you have the option to go to IT0027 and in there you may assign more cost centers base on different percentage.
    Hope it helps.
    Kind Regards,
    Edoardo

Maybe you are looking for

  • Problem in posting delivery

    Hi Experts, While posting delivery(Goods issue to customer) i am getting error in IDOC "maximum number of items in FI reached". In deliver i have 462 items ,can anyone help me to resolve the issue? thanks in advance, vani

  • How to fix this:MobileDeviceService has encountered a problem and needs to close.  We are sorry for the inconvenience.

    im having problem regarding my mobile Device Service..... Error Signature: szAppName : AppleMobileDeviceService.exe     szAppVer : 17.66.0.47     szModName : kernel32.dll     szModVer : 5.1.2600.3541     offset : 00012a6b i cannot connect ipad2 in my

  • Problem for reading data file in jar file

    I use eclipse to export my project to jar file. My project is a program used to update data of the company. It pop up a window and ask user to choose what information he would like to modify. When I run this jar file, the main window works well, but

  • Image Optimization

    I'm currently working on an application which requires a couple hundred png images to be displayed at once on the screen. I'm looking for ways to optimize the image storage so that it has the least effect on the user's system. The images must be resi

  • Adding clients to our wireless network

    We just added airport express as our wireless router and need help adding our windows xp laptops to the network. I do not see "add wireless clients from the base station menu" and our laptops do not recognize any apple wireless devices. Any help woul