How to restrict form setting - like production

our company is service sector, so there no need to wokr production module,
so i want disable this production module restricut to all users except superuser
regards
S Arunprasad

Hi Arun Prasad,
Option 1
1.Form Settings Uncheck the Production Module.
Option 2
Apply No Authorization in production module.
*Close the thread if issue solved.
Regards
Jambulingam.P

Similar Messages

How to restrict the GR for Production Order when Goods Issue is not done

Hi Gurus
How to restrict the GR for Production Order when all the required components for production order are not issued with all required quantity. Even for partial issue system should not allow GR with 101. The user status with RMWA, RMWF & CGFB is not working.
Pls suggest best solution.
Abhijit.

Hi,
You can club together the GI nad GR at the time of confirmation..
I.e Backflush for the components and auto GR for the Product.
So that you can stream line the Process.
The best Option would be to use the User Exit:
Enhancement - MBCF0002
Functional Module - EXIT_SAPMM07M_001
Include - ZXMBCU02
Refer below link for further details..
How to stop the goods receipt before issueing the goods for production orde
Regards,
Siva

How to restrict manual setting of User Status?

Hi,
I have created an User Profile where a particular User Status is "set" based on the Business Transaction "Release".
However, we are also allowed to set this User Status manually without carrying out the Business Transaction "Release".
How do I restrict manual setting of those User Statuses that are "set" based on a Business Transaction?
Raj

Pete,
I did read that post. But it is about providing authorisation to set a Status for an User.
The case I am referring is, an User Status is auto set by a Bus. Trans Release. But I am also permitted to set the status transition manually. This way, Users tend to skip Releasing the Service Order. This is affecting upstream processes.
Is there a way where we can restrict manual setting of User Statuses that have to be normally auto set by Bus. Transactions?
Raj

How to make a set of Product Recovery discs

Hi everybody.
          I meet some problem ,and need help.
          My notebook is T61p with Vista system
          I want to create a set of Product Recovery discs.And I click Start --> All Programs --> ThinkVantage --> Create Recovery Media.
          However ,I can't find Create Recovery Media in my PC .
          Where can I download the  Create Recovery Media and install it ?
          Anyone can help?
          Thanks!
Message Edited by SunWill on 07-22-2008 10:16 PM

Try to find the the program RRmedia.exe with windows search.
Click it to start and create your media. You´ll need more than 6 CD´s or 2 or 3 DVD´s.
In my system (XP) you´ll find RRmedia.exe in: "C:\Programme\Gemeinsame Dateien\Lenovo\spi\RRMedia.exe"
Message Edited by Agotthelf on 07-23-2008 07:47 AM
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community      Deutsche Community      Comunidad en Español

How to restrict value set to a certain responsibility

A group of users need access to add values to a value set. We dont want them to access all available value sets. So how can I restrict the responsiblity to access only one value set? can we create a function or something and pass the value set name? or does it need form personalization?
Thanks.

I don't think it's possible adding parameters to the form function. So, you would need to use form personalizations or add some code to the CUSTOM.pll. Another possibility would be to use lookups instead of value sets. Lookups can be restricted using form function parameters.
Hope it helps.

BEx Query Help   How to restrict Organisation Unit Like 'D%'    in Bex

Hi all ,
In a cube i have a columb   ORGUNIT     which is having Values from
A_152,
A8373 ,
D_983,
B_0293,
C09 ,
D6653 .
In bex Query Designer I want to restric that infoobject & organisation unit which is starting with 'D' .
means output will be   : D_983 ,
                                        D6653
ABAP statement    for this             ORGUNIT LIKE 'D%' .
how we do same in BI restriction .
Thanks Regards
Sanjeev Kumar
Edited by: skarya2003 on Dec 6, 2009 9:01 AM

Hi,
   Try using customer exit .
chk out this doc which helps u, http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90f8b363-882d-2c10-ea91-9f08ce4c658a&overridelayout=true
Regards,
Priya.

How ro restrict BEx Items like Report Designer,etc..

Hello Friends,
I have a situation where my end users should not be able to run Report Designer,Web Analyzer,Planning Modeller and BEx Broadcaster.
Can any one suggest me how to do this.
Do we have any auth objects that control them.
I tried to look many ways i didnt find any way.
Thanks,
Ram

for working on broadcaster user should have S_RS_ADMWB with field RSADMWBOBJ = BR_SETTING, and object S_RS_BCS.
and for saving and executing the formatted report in report designer user should have access to S_RS_ERPT.
make sure your endusers do not have these. that would do your job. users can get in to broadcaster and report designer, but they can't do anything. getting into these tools cannot be prevented until what I know.
S_RS_TOOLS was made a mandatory check in NW04s. so unless a user has it he won't be able to get into Web application designer.besides that S_RS_BITM and BTMP would help to restrict at owner level.
S_RS_TOOLS takes the 'COMMAND' = WEBPUBLISH.
unless you add this object to a user, he won't be able to get into WAD.
SAP din't provided anything like this to other tools until now. may be not many customers are requesting for it.
Message was edited by:
Keerti Vemulapalli

How to restrict planned order by production order type

we develop one Z-report which include planned order as well as production .on restriting the output by order type given on selection screen of report, production order can be restricted but it show all the planned order which is to be converted to selected order type production order or not.
is there any suggesion to display that planned order only to the output of report which will convert to the production order of the type given on selection screen of report.
i know that we define prod scehu profile in work sched view of material and in production schedu. profile we define the order type picked while conversion of planned order to production order.but i am not able to connect them by using table...please guide

Hi,
Could you explain your problem correctly.
regards
mkrk

Form setting for perticuler user

Hi Friends,
how to fix form setting for perticuler user.
Thank you
saman

Dear Saman,
If you want to set form setting for particular user than first gave him authorized for form setting, and than log on through particular user and than open the document (PO,SO.DO,A/R,A/P)and set the form.
if you want the copy form setting form of particular user than log through user and go -to Admin-setup-genaral-User and copy the form setting.
Regards
Mangesh Pagdhare

Copy Form Setting from one user to another

Hi,
I am using 2005A.
How to copy form setting (rows and UDFs at header) from one user to another user?
Thanks

Hi Ming Ming On,
I found a note couple of years ago.
I can't remember the note number, and I attach the note here.
Solution
The following queries enables you to set preferences for one user and copy those to another user who is supposed to have the same preferences.
Explanation for the queries variables:
dest - Company database name
sourcid - Represents the user ID from whom the preferences will be copied.
destid - Represents the user ID to whom the preferences will be copied.
How to get the user ID?
From SAP Business One query interface or from the SQL Query Analyzer, run the query as follows:
1. SELECT T0.U_NAME, USERID FROM OUSR T0 FOR BROWSE
2. From the query's results, identify both the sourcid and the destid.
3. In order to copy the preferences from sourcid to destid, run the query as follows:
a) Replace the text dest with the company database name.
b) Replace the text sourceid with the user ID from which the preferences will be copied.
c) Replace the text destid with the user ID to which the preferences will be copied.
d) Use dest, if exists (select 1 from sysobjects where name = 'temp_dev_sup')
e) Begin - drop table temp_dev_sup
f) End - select * into temp_dev_sup from cprf where usersign='sourcid'
Deleting a certain user:
Delete from cprf where usersign='destid'
Update userid in temporary table:
1. Update temp_dev_sup
2. Set usersign='destid'where usersign='sourcid'
Insert preferces into CPRF table
1. Insert into cprf
2. Select "" from temp_dev_sup where usersign='destid*'
예제)
1. Use TEST_MONAMI
2. drop table temp_dev_sup
3. Delete from cprf where usersign='2'
4. select * into temp_dev_sup from cprf where usersign='1'
5. Update temp_dev_sup
Set usersign='2'where usersign='1'
6. Insert into cprf
Select * from temp_dev_sup where usersign='2'

I want to add column heading like 'Product Desc.' in forms from Text elemen

Dear All,
I have added my description in first column like 'Product Desc' and I want to add second column like 'Cast No' in main window. Please let me know how to write the code in forms(se71) from text elements.
example:
Product desc Cast No yield stress
My logic:
/: BOX WIDTH 90 CM HEIGHT '3' LN FRAME 10 TW
Product desc
/: BOX WIDTH 90 CM HEIGHT '3' LN FRAME 10 TW
Urgent.
Regards,
Karthik.

Hi,
See any form like MEDRUCK in SE71.
For writing the Titles;
first use the Paragraph at the left side, and write the Texts just like that, using the Tab setting defined for that paragraph.
H Product Desc,, Cast No,, other field (here ,, for tab setting)
Only when writing the fields you use &kna1-kunnr& like this for every field.
Regards,
Anji

How to restrict issue the form through VOFM routine

Hi Experts,
I have developed form using adobe form, I need to issue the output only one time, once the output issued again the output should not issue.
I need to control this logic through VOFM routine...how to restrict ?
Thanks in advance.

Srinath,
Use the below option.
VOFM->REQUIREMENTS->O?P Control.
Create a new routine.
In the routine, check the table NAST using application, object key and message type. If you find an entry, set the sy-subrc value to 4 else set the subrc value to 0.
Let me know if this helps.
Thanks,
Vikram.M

How to restrict the user for re-submitting the same form

Hi All,
I would like to know, How to restrict a user for re-submitting the same page.
I have a jsp page with submit button... and should not allow the user to save the same data again ..
Anil

Try the followings. If user disable cookies, this will not work. You need to modify to detect such situation!
String processed = "mycooke";
Cookie[] cookies = request.getCookies();
Cookie c = null;
if (cookies!=null) {
for (int i=0; i < cookies.length; i++) {
if (cookies.getName.equals(processed)) {
c = cookies[i];
break;
if (c!=null) {
// already processed.
// send error message and exit.
// set cookie;
c = new Cookie(processed , "yourdata");
c.setMaxAge(-1);
response.addCookie(c);
// process as it is the first;

How do you change the Print Products Store from USA to UK like you can do in IPhoto?

How do you change the Print Products Store from USA to UK like you can do in IPhoto?

Please keep in mind that Aperture is not an enhanced iPhoto, it is a different application with a different philosophy and a different intended audience. If you approach it with that in mind you will have a lot less frustration as you learn Aperture.
Aperture adds a layer of complexity that is not needed by many. iPhoto is a very powerful application and fits the needs of many amateur photographers.
As for your original issue, as I said I am surprised that iPhoto allows you do switch countries like that and am not surprised that Aperture doesn't. If this is something you really need to do working in Aperture but using iPhoto to order the prints is a good work around and will not be all that difficult to do once you get the hang of it.
As for your new question, the books in iPhoto and Aperture are different enough that the code that created the book in iPhoto wouldn't work in Aperture. What happens when you import an iPhoto library into Aperture is that the images in the book are combined into an album in Aperture with the same name as the iPhoto book. You will need to re-create the book in Aperture uaing the images in this album.
Hope this helps, post back if you have anymore questions.
regards

How to restrict Order types KA and AB in script output form

How to restrict KA AND AB order types in script output data is coming from bkpf-blart .
program is rfkord10.
and form is f140_acc_stat_1
in script output i dont want to display KA AND AB order types ..
data is coming from standard report.
i copied form into zform.
in output it is displaing all order types ..
is there any solution to restrict above order types.

Hi
Check the data structures used in the script
Since it is account statement of customer it uses the Tables BSID and BSAD in which the field BLART field is there whose values are KA and AB
check for the structures which are used in the script and in them search for the field BLART in Se11 and accordingly keep the condition
It will work
Regards
Anji

How to restrict form setting - like production

Similar Messages

Maybe you are looking for