How to restrict from creating the Network for 1st & 2nd level WBS

Hi All,
In our project structure we have up to 5 levels of WBS, In some cases we have creates 3 level also . Now we want to restrict creates Network for first two level WBS , actually we want to restrict user to Create PR for those WBS so if we restrict them from creation of Network for 1st & 2nd level then they not able to create PR for same .
Thanks,
Virendra

Hi Virendra,
I can suggest you other way round solution.
If you are sure that those two WBS will not take any actual or commitment cost, then its better to NOT to mark those WBS elements as Account Assignment Element. I mean, if you do not set the indicator of Acct. Assignment Element (Untick Acct Assignment Element) on those WBS, then user will not be able to create Networks on those WBS Elements. Try this on your development or quality client and let me know if it works.
If it works, then you just need to disabled the Acct. Assignment Element indicator for those two WBS element and you can achieve that through substitution and field selection of WBS as well.
OR
Just look at OPSG settings at tab component. Just look if that can solve your purpose because your requirement is to stop PR from those WBS element. (I am just wondering if you can stop user from creating/change material components from those WBS-Networks)
OR
Go for User Status and set it to on those WBS Elements. Object Types will be Networks and Network Header.
OR
Try to achieve a validation or substitution where in you can mark Res./Pur. Req as 1 (Never) only for those two WBS elements. In this way user cannot create PR on those two WBS elements.
Regards,
Amit

Similar Messages

Error: Maintain settlement rule of the sender for a higher level WBS

Hi,
I dont want to maintain the settlement rule for a higher level WBS. How can i configure this in such a way that i dont get the following error:" Maintain settlement rule of the sender" while doing CJ88. Maintaing a separate Settlement profile for a higher level WBS is an option but we are looking if something else could be done The problem is that there are no actuals booked against, say, level 2 WBS but when i execute CJ88, i get the aforesaid error. How can i ensure that only the lowest level WBS ask for the settlement rule and not the levels above it. I have already removed the Investment profile from the higher level WBS but still getting the same error.
Regards,
DPil

Hi,
It is a type Capex WBS and Biling element is not checked. In fact i get a warning while doing the settlement: WBS is neither a billing element nor an account assignment element.
Diagnosis
WBS element is not indicated as either an account assignment element or as a billing element in the master record.
System Response
The WBS element cannot be assigned to an account.
Procedure
Correct your entries or add the missing indicator to the master record for the WBS element.
But this is just a warning. On pressing enter i get the error :Maintain settlement rule of the sender "

How to Create the BSP for two languages(English & Arabic)

Hi ,
I got the requirement where i need to create the form for the Annuitant (Retriees) through they will inform their annuity department still they are surviving....so based upon the annuitant department run the annuity payslip for him.......
In that I should keep company information in the top and resprctive employee information like EMP ID and his contact address need to specify by default.....
For ex: Employee X is clicking this form..it should contain common information like company name and also employee's "X" respective information like his EMP ID and his contact address like wise the form should generate both common address and employee respective information.....both in Arabic and in english....
Is there any readymade BSP for this or if anybody have developed same kind of BSP pls send the code to [email protected]
How to do that.....ist very urgent.......
Help will be higly apppreciated.......
Thanks in Advance ,
Jasmine

Hi Jasmine,
I think you should try the SDN Search the next time before posting. You would have found this: [BSP/HowTo: Generate PDF Output from a BSP|https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1002]. Also crossposting the same question is a bad behaviour.
Best regards
Gregor

How to create the request for change of selection text into other language.

Hi,
In my object requirement is that when login through Japanese language, then on selection screen selection text should appear in Japanese language. For that I have maintained the text in Japanese language the program where we define the selection text there from translation I have maintained the text in Japanese but while maintain the text it didn't ask me for REQUEST, because of that I am not able to transport the changes to next system, so I want know how to create the request for this case.
Thanks

Hello Chetan,
You could goto the selection screen texts by goto-> selection texts,
Then you could again goto -> Translation
or
Other-> Translation(Not sure )
Then double click on the Program you should be able to see the Texts that need translation, now change something save and come back and try to activate, now it should propose for a new Transport Request.
Either create a new transaport request or give one that you have given for the program.
Hope the issue is resolved.

I seem to not enter the correct answers to my security questions for itunes to buy an in-app purchase and also cannot answer the questions exactly like i answered them when creating the account for my ipod, how do i find out what answers i put

I seem to not enter the correct answers to my security questions for itunes to buy an in-app purchase and also cannot answer the questions exactly like i answered them when creating the account for my ipod, how do i find out what answers i put for my ipod touch and itunes?

Try these previous discusssions:
recover answers to security questions: Apple Support Communities
how do i change apple ID security...: Apple Support Communities

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

How stop PS6 from removing the DPI value from an image when using "save for the web"?

How stop PS6 from removing the DPI-value from an image when using "save for the web"?
Example:
- Open a tif image, that contains a dpi value (resolution).
- Use the splice tool in PS6.
- Export the slices with "Save for web", as gif-files.
Then the dpi value is removed, the gif files has no dpi value (it's empty).
How can we stop PS6 from removing the dpi value when using "save for web"?
OR:
When using the slice tool, how can we save the sliced pieces without PS removing the dpi value?

you can make your art go a little bit over the bounds. or you can make sure your artboart and art edges align to pixels

How to create the BOM for co product

Dear friends,
How to create the BOM for Co product and How the production will create and how the costing will capture for that.
Regards,
Sabhapathy R

Dear Umesh,
How Bom created for co product
By product
Header
xxx
101
mvt
mvt
qty
item
yyy
261
1
zzz
531
0.5-
By product
Same way how we create co product for BOM. pl explain with simple example.
Thanks &regards,
Sabhapathy R

How to creat the Varient for 1099MISC With Holding Tax

How to create the Variant for 1099MISC With Holding Tax ?

HI,
please follow the below steps to create variant at report.
tcode se38
report RFIDYYWT
pass all the parameters
press save icon
give variant name
retrive the variant in report
tcode se38
report name RFIDYYWT
press : shift + F5
or get varinat icon.
I hope above will resolve your issue.
Regards
Madhu M

When exporting from Photos, the panel for naming the file no longer shows up. Why and how do I change so I can name the file what I want?

When exporting from Photos, the panel for naming the file no longer shows up. Why and how do I change so I can name the file what I want?

You don't need to maintain all versions of the upgrade chain, but many of us do in case we need to work on a legacy file. If you want to rmove a version, though, ti should be done BEFORE installing the later one. Just reinstall CS5 and things should get back to normal.

User Exit For VA01 To Restrict From Entering The Same Material twice

Hello All,
I have a requirement that in sales order creation(VA01) i want to restrict From entering the same material
more than once in a sales order i.e more than one same material not allowed in sales order i have tried alot of user exists but of no use
can u tell me the exact user exit
Regard's,
Mahesh Dasari

Hi Mahesh Dasari,
1.This user exit is used to add additional datat to VBAP struture like custom fields. And this user exit is called for every single line item when processed.Say you have 10 items then this user exit will be triggered before each entry is populated in the XVBAP.
2.When the user enters item 10 with material 1 we allow him, then for the next line item say 20 we check if the material entered or processed ( this will be available in VBAP structure ) is available in XVBAP and the line item 10 is not deleted.
3. If the above check true then it means that the material entered is already existing else its not so it will proceed to next line item
e.g. in your question , item 10- Mat1 , item-20- Mat12, item-90-Mat1,
Then as per the code I have given , item 90 will be deleted or removed.
4. Now you can either delete the line item by clearing VBAP as I have done or give a error message that will be as per your requirement.
Use the logic I have provided in my earlier post , and see the behaviour.
Hope you find this answer helpful and set this questions answerd
Regards
Arun Thiyagarajan

When i mail icon my phone displays a message '' account restriction - this phone is restricted from creating mail account'' this is after i deleted the mail account that was there. please help

When I press the mail icon a message '' account restriction- this iphone is restricted from creating accounts. What could be the problem?

Settings>General>Restrictions.

How to creat the infopackage for RDA?

Hi all;
How to creat the infopackage for RDA?

Hi,
Check in
Real time infopackage
Re: Types od DTP and their uses in BI 7.0
Re: Real-Time Data Acquisition
Thanks
Reddy

How to create the recovery for windows 8

Hello,
I have windows 8 in my T430....I just wanted to know the detailed procedure for creating the recovery for it...
Thanks
Harsh
Solved!
Go to Solution.

Methodology to create Recovery Media and reload a Lenovo system with Microsoft Windows 8 preload
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How do you silently install the network license to Circuit Design Suite

After a silent install of Circuit Design Suite you still have to manually tell it the network license details. Is there a silent install for this too?

There are a couple of reasons you might see this error:
1. Make sure when you are creating the network installer, you are pointing to the root of the CD, containing setup.exe.
2. There was an issue with the first release of the network installer that would cause this error. The issue was resolved with a maintenance release.
See this knowledge base article for more information.
You can download the latest version of the Volume License Manager from here
Garret
Senior Software Developer
National Instruments
Circuit Design Community and Blog
If someone helped you, let them know. Mark as solved or give a kudo.

How to restrict from creating the Network for 1st & 2nd level WBS

Similar Messages

Maybe you are looking for