How to restrict in T-code J1id for particular tab

Hi,
i need restriction in J1ID for particular tab.
Regards
amit

Hi,
The corresponding table which you need to restrict is J_1IMOVEND.  Usually this table exists in &NC& authorization group. You can check the corresponding authorization group in your client as below.
Goto SM30 --> enter table name V_DDAT_54 --> click on display and select the table by using the position button.
You need to restrict the particualar authorization group to the user, so he can't see or change the "Vendor excise details"
You can also assign the required tables to different authorization groups (custom) in SE54.
Regards,
Gowrinadh

Similar Messages

  • How to run the Transaction Code - BIC for Bank keys uploading

    Hi
    How to run the Transaction Code - BIC for Bank keys uploading.
    please give me suggestion.
    Thanks
    Indu

    Go to BIC transaction screen
    Fill the selection screen parameters as below
    1. Update Run (Test Run: Check Off: Real Run:Check On)
    2. Set Deletion Flag (Check On)
    3. Maximum no. of records: 999999
    4. Detail List (Check On)
    5. Display variant: 1SAP
    6. Presentation server (Select Radio Button)
    7. Application server (Deselcet Radio button)
    8. File name and Path: Select relavant file which is to be upload
    9. Bank country: If needed (Give respective country name)
    10. Select execute button or F8
    NOTE: Make sure that before executing run execute TEST RUN by deselecting Update Run check box
    Hope this will meet your requirement
    Thanks.

  • How do I change the default zoom for New Tab only?

    The New Tab zoom in Firefox 33 is too high to see all 12 of my thumbnails. I changed it using ctrl- but the next time I opened a New Tab, the zoom was back at 100%. How do I change the default zoom for New Tab only?

    cor-el, what am I looking for in '''content-prefs.sqlite'''?

  • How can i identifiy the BAPI Name for particular transaction.?

    Hi friends ,
    In  data upload by BAPI How can i identifiy the BAPI Name for particular transaction.?
    For example ME21 How can i identifiy the BAPI Name?
    arun

    hi,
    check the link:
    ME21 tcode for Purchase Order creation so u can make use of BAPI f4 help i.e. ex-BAPIpo
    for list of all bapis
    http://www.planetsap.com/LIST_ALL_BAPIs.htm
    BAPI-step by step
    http://www.sapgenie.com/abap/bapi/example.htm

  • How to restrict the t code BBPMAININT with DISPLAY Mode in SRM?

    Hi experts,
    I want to restrict the T code BBPMAININT : Maintain Business Partner with DISPLAY mode in SRM system?
    Action Taken:1. I have restricted with "03 Activity"  of all check and maintainauthorization objects for this  tocde .
    2. I have performed the authorization trace also, there also I have not found any new objects.
    Here are list of auth object I have restricted:
    BBP_FUNCT
    BBP_PD_AUC
    BBP_PD_BID
    BBP_PD_CNF
    BBP_PD_CTR
    BBP_PD_INV
    BBP_PD_PCO
    BBP_PD_PO
    BBP_PD_QUO
    But I have not  clearly understand of the object : BBP_FUNCT.
    In this Object, I have maintained BE_F4_HELP value only.   And rest of the auth object I have restricted to 03 activity only.
    But still users are able to acess the CREATE and MANAGE buttons.
    So how Can I restrict the this T code in display mode?
    Please suggest me...
    Thanks in advance.
    Regards,
    Siva

    Siva,
    Does your users have any other tcodes assigned to them other than the one you needed to be resticted?
    As a trial, assign only your tcode to a user and run the trace.
    Let us know your findings.
    Regards,
    Brahmeshwar

  • How to add the Match code object for the requisitioner field in TCODE ME51N

    Hi,
    How to add the search help (Match code object) for the requisitioner field in transaction ME51N.
    Please  do the needful to me.
    Regards
    Rajesh

    don't you think that posting your question to a microsoft developer site would be more efficient?
    regards,
    anton

  • How to restrict the user in MIRO for not modifying  price

    Hi All 
    My requirement is How to restrict the users in MIRO screen for not modifying Material Prices  of only the for specific  ROH types .
    For example :
    Valuation class             RM description
      3021                             RM - A
      3022                             RM - B
      3024                             RM - C
    when ever we procure  the above Raw materials A,B and C and
    the Quantity of each Raw material @ 10 units  and value @ 1 INR  for each unit
    RM - A procured qty 10 @1 total price is INR  10
    RM - B procured qty 10 @1 total  price is INR 10
    RM - C procured qty 10 @1 total  price is INR 10
    total price of PO is INR 30
    when we received invoice material prices are  assume it INR 1 is excess for each material.Now the invoice price for each RM has become INR 11.
    in MIRO we want restrict the user to change the price from INR 10 to 11.
    suggest the best possible ways to restrict in MIRO screen
    Thanks & Regards
    Mala

    Dear:   
                      Take help of ABABPER fo implement exit using INVOICE_UPDATE or MRMH0003 Logistics Invoice Verification: Revaluation/RAP exit. If this does not help then seek help of MM functional who will help you to find exit for the required task.
    rEGARDS

  • How to restrict duplicate article codes in PO creation

    plz suggest how to restrict entry of same article code more than once in various purchsing  document types using ME21N transaction.

    Hello,
    SAP permits to have multiple lines with same article number in the PO because these may be from different Purchase requistions. You may validate the duplicates in function EXIT_SAPMM06E_012. In this exit, we will get all the PO lines.
    Thanks,
    Venu

  • How to upload multiple company codes data for single vendor by LSMW Idoc

    Hi ,
    My requ is like this.
    uploading data by LSMW Idoc method
    In source file we have two company codes data for single vendor.
    It should create vendor for two company codes.
    But its not creating its showing error.
    How to handle this?
    Thanks in Advance.

    have you ever see this docu:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/1a/178ac72d3011d3bc3500105a6588b2/content.htm
    You can use the recording function to create a new object (or a new "import method") if neither a standard batch input program nor a standard direct input program nor the BAPI/IDoc method is available for a data object.
    Recordings are static, thats why you cannot do such flexible things like  multiple company codes at the same time.
    But with IDOC method it is certainly possible, I have done it several times already.
    Unfortunatly the creator of this thread did not say what error he got with the IDOC method. Maybe he will add this. Otherwise I dont think that anybody can help

  • How to restrict Intercompany Invoice getting generated for receive only trn

    Hi All,
    I have a businesss scenario, where there are two operating units (A and B) Intercompany shipping relationship is set between these two OU's
    Operating Unit: A and Inventory Org: ZZ
    Operating Unit: B and Inventory Org: DEF
    1. If I have Sales order from A and shipped from B OU Inv org(DEF Inv org) , IC AR and IC AP gets generated and also End customer Invoice in A OU gets create
    assume the above order was for 10 Qty shipment
    at Inventory Logical transactions will be created in ZZ Inv org for 10 Qty shipment
    now if the customer comes backs and says you have shipped 12 Qty and returns the 2 Qty, here we dont send any credit Invoice to customer so RMA Order line type is Receive only when you raise RMA order in OU A aganist DEF Inv org (OU B) and you receive the goods in DEF, system creates logical transactions in ZZ inv org which is in OU A and forcing to create IC AR and IC AP in both the OU's, how to restrict the same
    Ideally its extra shipment done from DEF ware house and they are receiving back
    Thanks in advance
    Regards
    Krishna

    Hi All,
    I have a businesss scenario, where there are two operating units (A and B) Intercompany shipping relationship is set between these two OU's
    Operating Unit: A and Inventory Org: ZZ
    Operating Unit: B and Inventory Org: DEF
    1. If I have Sales order from A and shipped from B OU Inv org(DEF Inv org) , IC AR and IC AP gets generated and also End customer Invoice in A OU gets create
    assume the above order was for 10 Qty shipment
    at Inventory Logical transactions will be created in ZZ Inv org for 10 Qty shipment
    now if the customer comes backs and says you have shipped 12 Qty and returns the 2 Qty, here we dont send any credit Invoice to customer so RMA Order line type is Receive only when you raise RMA order in OU A aganist DEF Inv org (OU B) and you receive the goods in DEF, system creates logical transactions in ZZ inv org which is in OU A and forcing to create IC AR and IC AP in both the OU's, how to restrict the same
    Ideally its extra shipment done from DEF ware house and they are receiving back
    Thanks in advance
    Regards
    Krishna

  • How to restrict from creating the  Network for  1st & 2nd level  WBS

    Hi All,
        In our project structure we have up to 5 levels of WBS, In some cases we have creates  3 level also . Now we want to restrict creates Network for first two level WBS  , actually we want to restrict user to Create PR for those WBS so if we restrict them from creation of Network for 1st &  2nd level then they not able to create PR for same  .
    Thanks,
    Virendra

    Hi Virendra,
    I can suggest you other way round solution.
    If you are sure that those two WBS will not take any actual or commitment cost, then its better to NOT to mark those WBS elements as Account Assignment Element. I mean, if you do not set the indicator of Acct. Assignment Element (Untick Acct Assignment Element) on those WBS, then user will not be able to create Networks on those WBS Elements. Try this on your development or quality client and let me know if it works.
    If it works, then you just need to disabled the Acct. Assignment Element indicator for those two WBS element and you can achieve that through substitution and field selection of WBS as well.
    OR
    Just look at OPSG settings at tab component. Just look if that can solve your purpose because your requirement is to stop PR from those WBS element. (I am just wondering if you can stop user from creating/change material components from those WBS-Networks)
    OR
    Go for User Status and set it to on those WBS Elements. Object Types will be Networks and Network Header.
    OR
    Try to achieve a validation or substitution where in you can mark Res./Pur. Req as 1 (Never) only for those two WBS elements. In this way user cannot create PR on those two WBS elements.
    Regards,
    Amit

  • Using Firefox 26. How do I get a close button for each tab at the top of the screen?

    Some time ago, I had a close tab button for each tab on the top of the screen. I want that back. I have no additional add ons and the close tab is set to 1. Changing it to 2 does nothing.

    Do you have installed this extension?
    *Firefox/Tools > Add-ons > Extensions
    If you do not have the extension and also have no need for the feature that it provides then you can ignore this.
    If it works in Safe Mode and in normal mode with all extensions (Firefox/Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
    Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit)
    You can use one of these to start Firefox in <u>Safe Mode</u>:
    *On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
    *On Mac, hold down the Options key while starting Firefox
    *Help > Restart with Add-ons Disabled
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • How can I change the default behavior for ctrl-Tab?

    I tried to change the behavior of ctrl-Tab from 'Next Tab' to 'Previous Tab' and added 'alt-Tab' for 'Next Tab' in Keyconfig so I can navigate in both directions with one hand. It does not change the behavior of ctrl-Tab.
    I created both these shortcuts in Keyconfig:
    Next Tab
    gBrowser.mTabContainer.advanceSelectedTab(1,true);
    Previous Tab
    gBrowser.mTabContainer.advanceSelectedTab(-1,true);
    I even tried doing this from the command line with the same result:
    defaults write org.mozilla.firefox NSUserKeyEquivalents -dict-add "Next Tab" "~Tab"
    defaults write org.mozilla.firefox NSUserKeyEquivalents -dict-add "Previous Tab" "^Tab"
    I'm not sure why this didn't work but maybe "Tab" is the wrong keyword. I couldn't find any documentation on what it should be. Or possibly "Next Tab" and "Previous Tab" don't work in this case because they are not 'built-in' commands. A third possibility is that it won't work because ctrl-Tab is a built-in shortcut but I can't believe that is why. I was able to change cmd-Q to ^-cmd-Q no problem and that is a default OS X shortcut. I was also able to change other built-in functions' shortcuts, just not this one.
    So what am I doing wrong? Has anybody been able to change this particular shortcut?

    OK I posted a link to this thread on that forum thread but I still think this is general enough that it could be answered in this forum.

  • Firefox on OS X 10.6.8: How to have a different input source for different tabs in one window (the option "Allow a different one for each document" is on)

    Currently, firefox 29 keeps one language for different tabs in one window. Different windows can have different input sources...

    Thank you for your reply!
    I think I've accidentally marked the problem as solved, but in fact it's not.
    What is needed is that the firefox remember different input methods (languages, for instance, En or Fr) for different tabs so that when I switch between several tabs I don't need to change the layout.
    Chrome remembers my language settings for each tab, so it's not always one language for all the same tabs there. I haven't found such an option in Firefox so far.
    Hope it's clear enough.
    Thanks in advance.

  • How to restrict  tcode va01/va02/va03 for a particular role

    hi ,
    I have a requirement . I need to restric user fro VA01/VA02/VA03 if the user has role and Sales order customer group is related to a particular group .
    Do we have a Function module to get a role for a user  or can we write a code as authorization level or do we need to write it as user exits of va01/va02/va03 .
    Regards ,
    Prakash

    hi All ,
    My issue is I need to restrict the tcodes for a particular customer group is there in the sales order , that means it is order specific and I already know for which roles it is to be checked .
    Now can  we write any check in pfcg tcode so that we can check at particular group or need to handle at user exit level .
    Thanks in advance .
    prakash

Maybe you are looking for

  • E-Recruiting: Exposure to External Candidates

    Hi Experts, We're currently in the initial phase of implementing e-Recruiting 6.0 (Integrated scenario) at a telecom client on a global scale. Following is the doubt: Can we do away with exposing the client's e-Recruiting system to the external world

  • Xml file parse  event base

    hello all, i am learning xml file with sap help sample. I have a FM, that change xml-file into if_ixml_parser, but when i wrote the xml " <person status="retired">Walt Whitman</person>" and debug it. event_sub was 312, <b>event was always initial</b>

  • Support Patch Updation for ECC 6.0

    Dear All expert;s, i want to know about i in SAP ECC 6 SAP ERP system, Server is DEV, QA, PRD, i this all system no support path is updated ? also management do not want to update is, so i want to know if i am not updating support packages then what

  • Error 1406 when istalling itunes8. how do i fix?

    When I try to install itunes I get the following error: Error 1406. Could not write value to key \Software\Classes\.cdda\OpenWithList\iTunes.exe. Verify that you have sufficient access to that key or contact your support personnel. How do I fix this

  • No API Reference for 9.0.4.8  ?

    I am looking for the javadoc of ver. 9.0.4.8. I only found for 9.0.4.4 till now