How to restrict max number of client connection per extend server?

Does anybody point me or tell me what is the vm property or config element I need to put so that an extend client will not accept more than specified number of connections at any give point in time.

Hello,
Look at http://coherence.oracle.com/display/COH34UG/acceptor-config the <connection-limit> should do what you want.
Thanks,
Nick

Similar Messages

How to restrict the number of client connections.

Dear All,
I have an Oracle Database version 9.2.0.1 in a Windows server 2000. I created a database users prod1 in this database. Its a 10 member team. I have to make changes so that, at a single point of time there should be only 2 members connected to the database simultaneously using the id prod1. How do I perform this request?
Thanks in advance
With Regards,
Santhosh

Create a profile with session_per_user (concurrent session) as needed and then assign this profile to prod1 user, in your case.
CREATE PROFILE "REST_USERS"
LIMIT SESSIONS_PER_USER 2
alter user prod1 profile rest_users;
Parameter RESOURCE_LIMIT must be set to TRUE in the init.ora file.
Jaffar
Message was edited by:
The Human Fly

How to track IP's of clients connecting to DB server through Apps Server

My Application server address is like http://192.220.0.75:7779/forms90/f90servlet form=TEST.fmx&userid=@abc
I can connect to Apps server from any computer using explorer with this address .
for auditing when I connect to db server through Apps server then my audit table detect only server IP- 192.220.0.75 each time but when I connect by oracle DS or toad then my audit table detect each computers defferent IP address.
how can I detect different users and IP addresses connecting to database server using apps server instead of apps server IP?

You can try to use WebCache event_log, this one will show your clients IP or you can uncomment UseWebCacheIP ON in httpd.conf file, so you ensure that the access_log show the ip of the user and not of the server.
Greetings.

Server 2008 R2 RDP: limit max number of rdp connections per user group?

Hello everyone,
I have a Windows Server 2008 R2 with RDP installed.
I want to create a couple of user groups which will have 5 different users in each. Then I would like to limit RDP connections, let's say 2 connections for the first group and 3 connections for the second group. For example, if 2 users from Group 1 are connected
then when a 3rd user from Group 1 tries to connect it will be rejected to connect, but 3 users from Group 2 still can connect. Is it doable?
Thanks in advance.

Hi,
I would like to check if you need further assistance.
If you need help to create script, please post your questions in our related forums.
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home
Thanks.
Jeremy Wu
TechNet Community Support

How to identify the number of clients in server

Hai
Iam trying a network program to identify the number of clients which accessing the server. I dont no how to identify the number of clients which accessing the server through server machine. I want to identify the client machine ip or name. If you have any idea help for me.
Regards
A.KRaj

You can keep a ArrayList of active connections and store the IP address of the incoming connection in the Server. You have to do this everytime you accept a connection.

Max number of simultaneous connections?

Hi everyone!
how is possible to determine in advance the max number of simultaneous connection for my FMS?
thanks!

Hi,
Like Jay had mentioned the limitation on the number of connection to server depends on the capability of your server.
You can get the maximum number of connections made to the server, number of active clients... etc details through Administration APIs.
'getServerStats' gives you the "total_connects", which is the maximum number of connections made to the server. "connected" property will return the number of active clients to your server at one point. It also has many more statistics for your reference. This api returns the overall information of the server. If you want to get the details for specific vhost, you can use getVHostStats or getActiveVHostStats. To get more details on Administration API, refer your pdf documentation on "Administration API", that gets installed in your system under "$Root\Flash Media Server\documentation\flashmediaserver_3.5_administrationAPI.pdf".
Regards,
Janaki L

1252 - Max Number of Clients

I have customer that is looking at deploying 1252 access points. I was wondering what the maximum number of clients that can associate to a single 1252. Does this count differ between 1252s running autonomous and LWAPP? The proposed configuration is using B/G radios at 54Mbps but quoting the A/B/G model for future 802.11n deployment (5Ghz radios would be turned off for now).
Any information would be greatly appreciated.
Thx
Joe

Its not as simple as the max number of clients but you also have to consider the type of client. Also food RF deisign and survey are critical to maximising client throughput.
There are rules for existing aps of approx 20-25 max for data. This would be 7 for voice in mixed mode b/g or 14 for g only and 20 for a only.
The ap can theoretically support many more clients, I think the figure is 256. With very simplistic data transfer such as bar code scanning I have seen as may as 50 clients with no issues.
As you ar lookig at abg these figures seem realistic.
With 802.11n you hav more bandwith available, better utilisation of the spectrum and therefore more client but its about being realistic and looking at what you are trying to connect.
Streaming multimedia would be lower than data only. Data only I would say 50 clients no issues but thats quite a density considering the RF footprint. For voice you are stuck with the above figures as you are still only dealing with abg clients.
Hope that helps

How to find the number of users connected to database from OS level(Linux)

Hi All,
Could anyone know , how to find the number of users connected to database without connecting with sql*plus
is there any command to find it?
example we have 10 databases in one server, how to find the number of users connected to particular database without connecting to database(v$session)?
oracle version:- 10g,11g
Operating System:- OEL4/OEL5/AIX/Solaris
any help will be appreciated.
Thanks in advance.
Thank you.
Regards,
Rajesh.

Excellent.
Tested, works as long as you set the ORACLE_SID first ( to change databases )
ps -ef | grep $ORACLE_SID | grep "LOCAL=NO" | awk '{print $2}' | wc -l
Thanks!
select OSUSER
from V$SESSION
where AUDSID = SYS_CONTEXT('userenv','sessionid')
and rownum=1;Best Regards
mseberg

How to find the number of ODBC connections to Oracle Database

Hi All,
How to find the number of ODBC connections and all connections to the Database in last week. Are there any views to get this information?
Thanks in advance,
Mahi

What Ed said is true that Oracle doesn't note which type of protocol is connecting to the database, however, you can see which program is accessing the database.
For example: if you already know of a user using ODBC, you can verify as:
select username, osuser, terminal, program from v$session where username = 'SCOTT'
USERNAME                 OSUSER          TERMINAL   PROGRAM
SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
2 rows selected.Assuming that you can confirm the progam noted in the above (example) is the one using ODBC, then you can change the query such as:
SQL> select username, osuser, terminal, program from v$session where program = 'w3wp.exe';
USERNAME                 OSUSER          TERMINAL   PROGRAM
SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
2 rows selected.Just for kicks, I checked our listener.log file, but there was no reference of odbc in it either.
Hope this helps...

How to restrict the number of Records into the Table?

Is there any way that I can restrict the number of records can be entered into the table?
For example I have created a table TAB1 with size category 0( zero).
User dont want to enter more than 100 values, How to restrict the number entries? Whether Basis can do it?
Regards,
Prathap

Hi Prathap,
You can write a code in table maintenance events to restrict the number of Records added into the Table to constant.
Solution:
Se11 -> enter table name (TAB1) -> F6 -> Utlities -> Table maint. generator -> Envirnment -> modification -> events -> write here the form routine name.
Double click on routine name. You will get into include section of the code. Write here code like:
IF current_rec_num > 100.
messgae error 'Entry restriceted to 100'
ENDIF.
Somewhat this way you can achieve your target.
Regards,
Sachin

DataSource max number of open connections

We are using Oracle 9i AS.
We are using the pre installed emulated data source.
We have specified 30 and 100 as the min and max number of open connections.
We are using BC4J application modules in my application . For each application module we have specified the JDBC data source, so the default connection pooling at the Application Module level is disabled, via doConnectonPooling = true.
The question :
1. When i go into the OC4J Home screen and monitor the Open JDBC connections, why is the number more than the max that i have specified ? My data source is being used , because my app is up and running.
thx.

Chints -- There were a few cases that where max connections was not honored prior to the Oracle9ias v903 release. These issues should be fixed in the Oracle9iAS v903 production release.
Thanks -- Jeff Would there be any difference if we were to use a non Emulated data source..we are using Oracle 9i on the back end
thx!!

Adobe Media Server pro 5 Scalabiltiy Requirements with respect to the number of clients connected

what are the hardware requirements mapped to the number of clients connected to a vritual server running on a Windows 2008 R2 Server? At what point should the scaling be done, what are the best practices? The encoding rate used is 360 Kbps.

Hi Simon
The HTTP (HDS and HLS) streaming and recording limit in Adobe Media Server 5 Starter is 10 min. You'll need to buy a serial key if you want to record/stream for longer. Also there are no limit on number of clients for HTTP.
Hope this helps.
Thanks,
Apurva

How to restrict the number of login attempts?

Hi,
Is there any "out of the box" solution to restrict the number of login attempts
in personalization server?
Thanks

why is it obvious he wants to restrict instances
of program, rather than instances in
it? it's not obvious, but it's what I think he meant
he asked "how to restrict the number of instances in
a program". it has the words "instances" and
"program" in it, but not the word "class". on face
value, yes, he's asking about instances within one
JVM. knowing a bit about how newbs minds work, I'm
reading between the lines and I reckon he meant
instances of his program. had he meant
"instances of classes" he'd have said so. "instances
in a program" sounds like somebody more experienced
talking, which if he was, he'd know how to do limit
either instances of classes or instances of
his program, and wouldn't be asking. I could be
totally wrong, but I don't think I am; that's what I
inferred from his post. only the OP knows for sureInteresting.
The OP also said "to any number". So you were guessing that this particular user wants to only permit, for example, five instances to be run on any one box at one time?

How to change maximum number of client of wifi connection in cmd mode

I have a problem with my pc, that shows maximum number of client that can be connected via wifi is 4.So I want to change that. Please help...

Hi,
It would make more sense that most routers are limited by their hardware, and will experience performance
degradation as number of devices increase.The maximum number of wireless users you can connect through your
WiFi router differs from brand to brand.
Thus I would like to suggest you contact your router's support for help.
Karen Hu
TechNet Community Support

How to set the number of outbound connection of the emote delivery queue

I have a ms exchange 2007 server, that is delivering e-mail's to a smtp server that is out of our organization by smtp.
The receiver is a very slowly server due to a antivirus program that he is using.
The server side has a few smtp server's that are set in load balancing system, to handle a lot of connections, this is the way the problem of the low performance can be solved.
My problem is that I see that the exchange 2007 server establish only one connection avrey time, when he is handling the outbound connection of the emote delivery queue. In that way the load balancing system does not help.
How can I set the exchange 2007 server in a way that he will handle more than one message in
queue a time, in a different tcp connection?

Are you sure that it's your server that's the problem?
If the receiving site has its load balancer set to send all connections from a given source IP address to the same load balanced member server then your server is limited by whatever restrictions the load balancer or the receiving server imposes (which may
be no more than one connection per source IP address).
I suppose you could try opening more than one "test" session to the target IP address with "telnet <ip-address> 25" and see if you can open more than one SMTP session with the target.
Also, have you made any modifications to the transport settings on the HT server(s)? For example, have you limited the maximum number of connections per domain?
--- Rich Matheisen MCSE&I, Exchange MVP

How to restrict max number of client connection per extend server?

Similar Messages

Maybe you are looking for