How to restrict metadata to use only view values

I have a metadata which takes values from view, i want to restrict it's value to use only view values( as it is editable , user can type any value , and right now it is allowing any value but i want to restict it to use only view values.
Thanks.

Hi Chely,
Try doing below steps and let us know if this solves the problem
Log in to WCC
Click on Administartion --> Admin applets --> configruation manager
Choose the metadata value for which you have problem
Click on Edit
Click on Configure button next to Enable Option List
What value do you see in Option List Type?
Change it to Select List validated and see if problem persists.
regards,
Deepak

Similar Messages

How to call web-service using only java code

Hello, how to call web-service using only java code. I can call it from BPM process or Web Dynpro Java Application, but if I need to call it from ejb component?

I'm found answer:
Java and SAP Portal blog: How to call web service from java code example

How can i develop charts using only xml defination

how can i develop charts using only xml defination.can any one please let me know
manks

hello,
in reports 6i the charts are created using oracle graphics which stores the chart definitions in a separate file (.OGD). there is not XML interface for graphics.
with reports 9i and the introduction of the BIgraphBean the definition of the chart-properties is also done in XML.
reports 9i will be available with iAS Release 2.
regards,
the oracle reports team

Restricting User to Enter Only Date Value

Dear Expertsl,
Can we restrict users to insert only date value (in RRMMDD format ) in a column whose data type is number,
Note that i cannot modify the column because there are already values entered in the column and cannot delete it.
Regards

Try to convert it to a date in the WHEN-VALIDATE-ITEM-trigger, if it works, its a date, like
DECLARE
dt DATE;
BEGIN
dt:=TO_DATE(:THEITEM, 'MMYYYY');
EXCEPTION
WHEN OTHERS THEN
    -- Show error message
    -- then raise error
    RAISE FORM_TRIGGER_FAILURE;
END;

How to switch display to use only AMD graphic card on Lenovo G470

Hi, seems like there are 2 graphic cards on my Lenovo G470, 1 internal & 1 AMD HD6370. Does anyone knows how to change the option so the laptop always use only AMD graphic card?
Thanks!

hi childs,
is there any graphic card switch button? also, have you tried to disable/activate the graphic card in bios?

How to force RH9 to use only one master stylesheet for all Word imports?

I have set a stylesheet (css) as the default for my RH9 WebHelp project in project settings. When I import Word documents into the project, the edit import setting dialog does not show this stylesheet in the list of available stylesheets for the import.
What is happening instead is a proliferation of unwanted stylesheets derived from all the imported documents. I then have to manually re-set all the new topics to the master stylesheet.
How can I stop this, and force RH9 to use only the one master stylesheet for all imports?

cid:[email protected]
Hi Peter,
That’s what I thought I was doing in the Project Settings>Import tab>CSS for Style Mapping selection. Maybe that isn’t what it’s meant to do. It’s just getting annoying having all these unneeded files popping up in the project manager so that I have trouble distinguishing the “real” topics from the extra stuff.
Michael West | Business Improvement | Aurecon
Ph: +61 3 8683 1996 | Fax: +61 3 8683 1444 | Mob: 0407 485 228
Email: [email protected]
PO Box 321, South Melbourne | VIC 3205 | Australia
http://www.aurecongroup.com
http://www.aurecongroup.com/apac/groupentity/

In multiple web cam publisher environment for a room how to restrict subscriber to see only admin

I am creating a video chat application, where admin can publish his video and all the subscribers to this admin room can see admin video feed. In this application Member list sections will display list of all user s including admin connected to this room. This member list panel is displaying images of respective user against each user’s name.
Till now this application is working fine but I am trying to add following functionality in this application
In member list section, in place of connected user‘s image I want to display each user‘s video feed. To achieve this functionality I am giving start video functionally [via a button click] for each subscriber which in return calling a web cam publisher component to publish the subscriber video feed. This is also working fine, but now problem is all the subscriber can see others subscriber video feed along with admin video feed. I want to restrict subscriber to see only admin video feed..
Please provide me some suggestion / solution to resolve this issue.
Note : I have created two video chat applications one for admin another for subscribers both are connecting to same room[admin room]
Thanks ,
Ritesh

Hi Ritesh,
Use two different WebcamSubscribers. One Subscriber would just subscribe to the Admin's Video feed, while the other subscriber would subscribe to all the user's: video feeds.
Try exploring the publisherIDs API in WebcamSubscriber.
Thanks
Arun

FB02 how to restrict to certain fields only during editing

hi!
Would like to know how to restrict fields e.g. Baseline Date when using FB02.
Thanks

Hello,
Your Base line date is controlled from settings in payments methods. (This payment methods must have been assigned to your vendor or customer)
You have four options:
Posting Date
Document Date
System Date
No default
In first three cases, the system proposes the date, however, the user will have the option to overwrite them.
In the fourth case, the system forces the user to enter a valid base line date.
"Base line date is nothing but a date from which the due date stars get calculating"
If you want to restrict the base line date, write a validation in GGB0 and assign the same in OB28 for your company code.
Regards,
Ravi

How to shutdown the PC using Lab View

Hi,
We are doing UPS project. In this project we have to shutdown the PC if there is a battery low condition. I want to know whether is their any library function in Lab View to shutdown the PC. And also we want make this labview to run in background whenever PC turns ON, is their any way to make Lab View VI to run in background process. We are also planning to send UPS Status through SMS message to specified mobile number using modem, is their any way to do this using Lab View. Please help me in this regards.
Regards
Shivakumar Singh

Sorry
Attached now
"Qod natura non dat, Salmantica non praestat"
Attachments:
Shutdown_labview.zip ‏67 KB

Running Lion 10.7.5, how to disable sslv2 and use only RC4 ciphers to solve vulnerability found in PCI compliance vulnerability scan.

This is what the scan report told me to do. Is this even a problem that can be solved in a browser? I have akamai installed on my mac and they say that may be giving a false problem concerning the sslv2. I have no idea how to change the ciphers used.

ATT says the modem for household use that I have cannot be configured to use the more secure CR4 cipher and disable sslv2 settings. Says I need to get a modem designed for business network use. What a nightmare. All I do is go to a pay gateway website and enter in my customer's credit card numbers, which then is deposited into my bank account. Seems this is the same as any credit card purchase I would make online and that ATT should have security for those transactions covered already. The pay gateway site does use CR4, but the scan has failed me because apparently my modem does not. I am not operating an e-commerce website. (I meant to say false POSITIVE in my question above, not false problem.)

How to restrict a user typing a custom value in the dDocAccount field.

I have dDocAccount field drop down pre-populated with 2 values - Dept1, Dept2. However, user can able to type any other values (say Dept3) in the account text box and checkin a doc from WCC UI. How to restrict user from entering custom values?
As an alternate solution - for time being i have the above account field is set as hidden using rule. I am trying to derive the account value from another one field's value (say Departments field with values Dept1, Dept2). I tried below code and found working:
Department is a custom field created as option list with values Dept1, Dept2
Under the Rules, for the field dDocAccount, is derived field checked and added below code
<$dprDerivedValue=#active.xDepartment, getValue("#local","dOption")$>

Hi,
If Department is a custom metadata then you should access it like xDepartment(as any other custom metadata), not dDepartment.
I know it is also possible to change the HTML that is generated for the dDocAccount field, to add javascript validation and so on, maybe this approach plus some additional JS and HTML twists and you should get it working(via component development).
Hope it helps,
Vlad

How to restrict user to not enter same value in tabular form

Greetings !
i m asking second time the questiion because i was not answered preivously, so please dont mind if it is a duplicate one,
question was: i created tabular form as shown in example.
i want to validate username as you see in my example to restrict user to enter the same value in username field before submit page.
e.g when user is entering data as u see test in username in first row, when he/she goes to second row and type the same username like test " message will appear or restrict user that already typed or in use"..
http://apex.oracle.com/pls/apex/f?p=45296:1:22797340776918:::::
this all be done on typing before submit record.
please gudie

Hi,
i m asking second time the questiion because i was not answered preivously, so please dont mind if it is a duplicate one,question was: i created tabular form as shown in example.
i want to validate username as you see in my example to restrict user to enter the same value in username field before submit page.
e.g when user is entering data as u see test in username in first row, when he/she goes to second row and type the same username like test " message will appear or restrict user that already typed or in use"..
http://apex.oracle.com/pls/apex/f?p=45296:1:22797340776918:::::
this all be done on typing before submit record.>
Stick the below code in the Page Header > Javascript > Execute when Page Loads field.
$('[input[name="f03"]').blur(function(){
if ($('input[name="f03"][id!="'+$(this).attr('id')+'"]').val() == $(this).val()) {
     alert('Duplicate Entry.');
     var x = $(this).attr('id');
     setTimeout("(function(p){$('#'+p).focus();})('"+x+"')",100);
})Note :
a.f03 is the "name" of your username column in the Tabular form.
b. This validates only the displayed values . If your Tabular Form has multiple pages then all the rows not currently displayed will be ignored.
Cheers,

How to make a subscription use the default value for a parameter

Hi everyone,
I need to use the CreateSubscription method and have this new subscription use a default value for certain parameter. How can I do this?

Hi Marianne,
I have to create the subscription programatically, which is different from what you mention. To further clarify my challenge:
I have three parameters in a report: date-interval (string), start-date (date), end-date (date). If the user selects for example "last week" as the date-interval, the DEFAULT values for the other two are as follows:
Code Snippet
start-date=DateSerial(Year(Today),Month(Today),Day(Today)-Weekday(Today)-6)
end-date=DateSerial(Year(Today),Month(Today),Day(Today)-Weekday(Today)-1)
The user can then select intervals like "today", "yestarday", "this month" etc, and the other two parameters are calculated based on that date-interval parameter. Now, If I programatically create a subscription to a report that contains these three parameters and set a value of "last week" for the date-interval parameter, the subscription stores the fixed days (say september 10 to september 16) producing a report of the same week every time the subscription is run and not updating the correct interval to LAST-WEEK!. What should I put as the value for start-date and end-date when I create the subscription to have these two params get the DEFAULT calculated value based on the third param date-interval?
Hope to have been more clear now.

How to restrict / limit users NOT to view a particular type of costs !

Hi,
EBS - R12.1
One of the requirements from our client is that, they want to cost employee salaries onto Projects (as overheads).
Now, how to limit/restrict visibility (view) of these costs to all users (except PM).
I mean, can we restrict a particular type of costs to everyone except PM.
Please let me know.
Thank you,
Vish

Hi
Here is the explanation from Oracle Help:
Project and Labor Cost Security in Oracle Projects
Oracle Projects provides three levels of project-based security to protect data ownership and sensitivity in relation to a given project or project template. For each level of security, Oracle Projects enforces default business rules depending on an employee's relationship to a project, as illustrated below:
Action Key Member Cross- Project Other Users
Query project information YES YES YES
Update project information and perform functions on a project YES YES
View labor costs of detail expenditure items (@) YES YES
(@) Only if the user's project role type is configured to view labor costs.
You can override the default logic or add additional security criteria via the Project Security Client Extension. For a detailed description of the project security extension, see: Project Security Extension.
Key members are responsible for the management and administration of the project to which they are assigned. Each key member is assigned a project role type, which describes the type of role that the employee has on the project. Project role types include Project Manager and Project Administrator. You define whether each role type can view labor costs online and in reports.
Cross-project users can view expenditure details and update information for any project, even if they are not assigned as a key member to the project. Cross-project users log in to Oracle Projects under a cross-project responsibility. You define an Oracle Projects responsibility as a cross-project responsibility by setting the PA: Cross-Project Responsibility profile option value to Yes.
View Labor Cost Allowed
This level of security determines whether or not you can view labor costs (both raw and burdened). The default business rule in Oracle Projects is that you may view labor costs if you are:
### A key member for the project and your project role type allows you to view labor costs
### A cross-project user
If you are not permitted to view labor costs, the amount is not shown in the form field; that is, the field will be blank.
Dina

How to restrict data by using a variable in webi

Hi Gurus,
My users need to see only previous day data when they open the webi but should have ability to view older data later.
How can I do that?
I tried =MAX(Day([Creation Date]) In Report)
But its not giving me right results.
Any suggestions?
Regards
Aj

Sorry..for late response.
Answers to your questions:-
Previous day to current date.
I tried to follow steps given in the following link but failed as we have Teradata as data source and I dont know how to write a syntax for teradata similar to what is explained by Dave.
http://www.dagira.com/2007/08/22/dynamic-dates-part-i-yesterday-and-today/
Regards

How to restrict metadata to use only view values

Similar Messages

Maybe you are looking for