How to restrict number of received e-mails

how to restrict number of received e-mails at iOS 7 ( at previous iOS there were options to receive last 50 or 100 or 200 messages ) ??

I have no idea which component you're talking about. If want to discuss here about a non-Sun JSF component, then please mention about the name, version and build in detail. You can also consider posting this question at the website/forum/mailinglist of the component manfacturer rather than here. At least I can tell you that the Sun JSF h:dataTable has the 'rows' attribute for that. I can also suggest you to just take a look in the TLD documentation of the component in question. There should be all possible attributes listed with a detailed explanation about the behaviour.

Similar Messages

  • How to restrict number of rows display using ig:gridView

    Hi
    All
    How to restrict number of rows display using <ig:gridView datasource="{mybean.mylist}">
    i am getting 10 rows using data_row . i wanna show only first 5 rows .
    pageSize ="5" will be ok . but it displays remaining rows in next page. but i want to display only first 5 rows . is there any attribute to restrict number of rows.
    thanks
    rambhapuri

    I have no idea which component you're talking about. If want to discuss here about a non-Sun JSF component, then please mention about the name, version and build in detail. You can also consider posting this question at the website/forum/mailinglist of the component manfacturer rather than here. At least I can tell you that the Sun JSF h:dataTable has the 'rows' attribute for that. I can also suggest you to just take a look in the TLD documentation of the component in question. There should be all possible attributes listed with a detailed explanation about the behaviour.

  • How to restrict number of concurrent connections etc.

    Hi,
    I'm able to use wi-fi thru WRT54GC.
    I want to know:
    1. How to restrict number of users connecting to the wireless network that is setup thru my router?
    2. I also want to know about any monitoring software which can tell me about connected PCs, user names, bandwidth available, bandwidth utilized etc.
    Thanks in advance
    Rajeev

    1. logon to router's setup page, open I.E. and in the address bar type 192.168.1.1, it would ask for username and password, put "admin" default password without any username... click on the wireless tab >> wireless security >> try setting up wireless security as per the requirements, also you can setup wireless MAC filter and you can setup MAC address of wireless computers which you want to allow to coonect to the network...
    2. not quiet sure about monitoring software which would show you detail log about bandwidth, bandwidth utilized by each computer...however you should view router's logs from linksys "logviewer" utility...go to ftp.linksys.com/pub/network and download the "logviewer" utility.
    let me know if you have any issues.

  • How to restrict users sending/receiving mails to other domains in NMS

    In an Extranet where five domains are there, how can I prevent users to send mail only between three domains from rest of the two domains, they should not have access. sometimes sending mail fails from the same host with multiple domains.

    There is a provision in admin module where by the admin can deny or grant access to a user or a group of users for accessing or being denied.
    It could be a service ,username or domain name to customize the users previlieges.

  • How to restrict number of rows returned in a query

    Hi frnds,
    I'd like to restrict number of rows returned by my query to some 10 rows. how to do that.When I try doing with the rownum<10 its giving results for a particular dept and that too some 6 rows only...btw I'm grouping my table and includes joins from many a table and am ordering the table results by a column.. How to do this..

    776317 wrote:
    Hi frnds,
    I'd like to restrict number of rows returned by my query to some 10 rows. how to do that.When I try doing with the rownum<10 its giving results for a particular dept and that too some 6 rows only...btw I'm grouping my table and includes joins from many a table and am ordering the table results by a column.. How to do this..
    TELL ME HOW MANY ROWS YOU HAVE IN TABLE?
    Because you have only *6 rows* in you column, if you less than 10 rows then it displays only containied/exist rows. nothing much
    select ename,empno from emp where rownum < 10;Thanks

  • How To Restrict Number Of Rows For Multiple Group In Report Output

    Hi ,
    I have a requirement to restrict number of rows in report output.I have three different group , if i use same no of rows to restrict then output is as expected but if i want Deduction group should have 7 rows , earning should have 5 rows and Tax group have 3 rows in report output then XML tag is not working.
    Below is the XML tag i am using -
    First i have declare the variable to restrict the rows -
    <xsl:variable name="lpp" select="number(7)"/>
    <xsl:variable name="lpp1" select="number(5)"/>
    <xsl:variable name="lpp2" select="number(3)"/>
    For Each -
    <?for-each:PAYSLIP?>
    <xsl:variable xdofo:ctx="incontext" name="DedLines" select=".//AC_DEDUCTIONS"/>
    <xsl:variable xdofo:ctx="incontext" name="EarLines" select=".//AC_EARNINGS[ELEMENT_CLASSIFICATION!='Taxable Benefits']"/>
    <xsl:variable xdofo:ctx="incontext" name="EarTaxLines" select=".//AC_EARNINGS[ELEMENT_CLASSIFICATION='Taxable Benefits']>
    <?for-each:$DedLines?><?if:(position()-1) mod $lpp=0?> <xsl:variable name="start" xdofo:ctx="incontext" select="position()"/>
    <?if:(position()-1) mod $lpp1=0?><xsl:variable name="start1" xdofo:ctx="incontext" select="position()"/
    <?if:(position()-1) mod $lpp2=0?><xsl:variable name="start2" xdofo:ctx="incontext" select="position()"/>
    Report output is tabular form (one page has two column - Earning and Deduction ) . Tax group comes below earning group.
    Deduction Group -
    <?for-each-group:$DedLines;./REPORTING_NAME?><?if:position()>=$start and position()<$start+$lpp?>
    <?REPORTING_NAME?>
    <?end if?><?end for-each-group?>
    Earning Group -
    <?for-each-group:$EarLines;./REPORTING_NAME?><?if:position()>=$start1 and position()<$start1+$lpp1?>
    <?REPORTING_NAME?>
    <?end if?><?end for-each-group?>
    Tax Group -
    <?for-each-group:$EarTaxLines;./REPORTING_NAME?><?if:position()>=$start2 and position()<$start2+$lpp2?>
    <?REPORTING_NAME?>
    <?end if?><?end for-each-group?>
    Please let me know in case additional detail is require.
    Thanks in Advance.
    Thanks,
    Harsh
    Edited by: Harsh.rkg on Jan 14, 2013 9:43 PM

    variable lpp2 is declare to restrict EarTaxLines -
    <xsl:variable name="lpp2" select="number(2)"/>
    This will help to restrict the no of rows on one page , if we have more then two tax benefits line then layout will roll over to continuation page.
    As part of report output my expectation is if i restrict Earning , Deduction and Tax benefits to same no of line for example - variable lpp ,lpp1 and lpp2 have same value "number(2)" , we can see the layout is continue on next page (restrict every group can have max two lines) .This is the reason we have 4 header grid , deduction and Tax Benefit lines are rolled over to continuation page .But if we restrict different value for each variable then continuation page layout is missing .
    When we tried for <xsl:variable name="lpp2" select="number(3)"/> value continuation page layout is not getting generate for both employee number .

  • How to restrict number of items in billing documents

    hi,
    is there any procedure for restricting number of items in sales order level or any document level.
    regards,
    bala

    Hi,
    You have to maintain the following in addition to our Guru,s reply
    You must also go to copying control for order/delivery to billing document at item level under "Data VBRK/VBRP" and maintain routine 006 "individual invoice limited" or a similar routine that accesses the data maintained here.
    then it will work.
    Regards,
    Ravi Duggirala

  • How to restrict number of rows returned in BIP

    Hi Friends..
    How to restrict no of rows displayed by the report to some 10 rows for example.. in BIP

    If its in RTF you can use position to restrict.
    <?for-each:ROW[position()<11]?>
    You can also restrict it in your sql query using ROWNUM.

  • How to restrict number of hits from a browser, within a specific interval.

    Hi,
    we have a web app in which user clicks on a specific submit continously. This fills up the server threads and other users trying to login either get a timeout or page not found. my questions ---
    1. Is there a way to configure weblogic to timeout the httprequest and also the underlying thead which is doing the work.
    2. Is there a way to restrict number of requests from a client within a specific interval..
    thanks in advance..

    Hello Benita
    Set the dialog type of your search help = 'A' (dialog depends on set of values).
    Regards
      Uwe

  • How to increase number of folders Apple Mail allows.

    New folders in Apple Mail are appearing at end of list, rather than alphabetically.
    Thanks for any suggestions to increase number of folders allowed.

    Deepak,
    Check out the following link http://ysislmap.googlecode.com/svn-history/r3/note/siebel/MTServer.txt ..Will help you in configuring Max tasks.
    I think you are using workflow policy programs to trigger emails using Email Manager component,if this is the case then it is not a recommended way to create another email manager component running in another siebel server,coz at same time both siebel servers will invoke the component to trigger mails ending you up in receiving two similar mails.
    -Sambit

  • How to restrict number of Data Records from Source system?

    Hi,
    How can I restrict the number of Data records from R3 source system that are being loaded into BI. For example I have 1000 source data records, but only wish to transfer the first 100. How can I achieve this? Is there some option in the DataSource definition or InfoPackage definition?
    Pls help,
    SD

    Hi SD,
    You can surely restrict the number of records, best and simplest way is, check which characteristics are present in selection screen of InfoPackage and check in R3, which characteristics if given a secection could fetch you the desired number of records. Use it as selection in InfoPackage.
    Regards,
    Pankaj

  • How to restrict number of row/lines in a table in RTF

    Hi,
    Im working on PO report. It has header information in the header part of RTF. But coming to the lines , I put that under a different group in the table in the body part of the RTF. I did a FOR loop for printing PO Lines because it does have multiple line information. But now i have to restrict the number of rows in that table per page irrespective of number of PO Lines. After printing 20 rows in the table, it should go to the next page. Im going through the other threads for the solution.
    Thanks,
    venkat

    There are so many thread regarding this ,
    pls go thru them patiently...
    logic is something like....
    use if condition and position() and say page-break..
    use for-each@section instead of for-each..so that the headed info is maintained with regards to PO lines
    happy searching...
    if you cant get still, last option send me mail with details

  • How to restrict number of column exposed by xsoData service at runtime

    Hi All,
    I have created one xsoData service over calculation view (imported one BW cube).
    I want to expose few characteristics of cube and a key figure.
    I want to decide this key figure at run time,means if i have say three key figures say quantity, cost and revenue apart of my characteristics.
    when i run this service, i should be able to pass key figure name for which i want to see data.
    Can i have a variable for column name for this purpose and how i can pass it its value ?
    Please suggest.
    Regards,
    Rohit

    Hi Thomas,
    Thanks for the reply.
    I have already used to restrict the number of columns using 'WITH' keyword.
    Say there are 10 characteristics and 10 keyfigures in my calculation view.
    Out of which i have exposed 3 chars and 3 KFs using 'WITH' keyword, for keyfigures i want to have one variable or placeholder in my xS ODATA  service whose value i want to pass from UI( through XS service URL).
    So my service should fetch 3 Characteristics and a keyfigure say qty or cost or revenue.
    Please let me know if anything is still not clear.
    Regards,
    Rohit

  • How to restrict number of character to be entered in an input field??????

    Hi All,
    I am using the tab phtmlb:formLayoutInputField to define an input field. I need to restrict the end user from entering a maximum of 70 characters(can be any character/number) in the textbox.
    I'll explain in another sentence:::: the end user should be able to enter only 70 characters in the textbox and 71st character should not be allowed to enter. Could anyone please suggest as to how I can achieve this?
    Thanks a lot in advance,
    Best Regards,
    Varun

    Hi,
    We can limit the length of an inputfield by mentioning the maxlength properties of an inputfield.
       <htmlb:inputField   id= "get"
    maxlength="6" />
    This restricts the
    Hope this helps you.
    Regards,
    Rajani

  • How can I save photos received in mail in iPhoto?

    If I receive photos in "Mail", if I save them they go to my folder "Pictures".  How can I save them to iPhoto?

    What is your iPhoto version? With the most recent MacOS X 10.9.4 and iPhoto 9.5.1 you can select the attached photos in Mail, ctrl-click them, and use the command "Export to iPhoto". This will add them to your iPhoto Library in a new event.

Maybe you are looking for