How to restrict number of Rows in page?

Hi Experts,
I have scenario when i convert the Report in to PDF i have to display 10 Rows per page. \
Any ideas !!!
Thanks
-B-

Hi,
I have tried this method at my end and its working perfectly fine.
1. I created a variable at report level as:
v Test = Floor(RowIndex()/10)
2. Added this variable in the Block as a new column.
3. Select the v Test column, Right Click and set as section.
4. Go to structure mode select section and go to properties tab and select the property "Start on new page" under Relative Position.
After following these steps, if you are not able to get the result then can you provide details of the failure or what results did you get and so on.
Regards,
Rohit

Similar Messages

  • How to restrict number of rows display using ig:gridView

    Hi
    All
    How to restrict number of rows display using <ig:gridView datasource="{mybean.mylist}">
    i am getting 10 rows using data_row . i wanna show only first 5 rows .
    pageSize ="5" will be ok . but it displays remaining rows in next page. but i want to display only first 5 rows . is there any attribute to restrict number of rows.
    thanks
    rambhapuri

    I have no idea which component you're talking about. If want to discuss here about a non-Sun JSF component, then please mention about the name, version and build in detail. You can also consider posting this question at the website/forum/mailinglist of the component manfacturer rather than here. At least I can tell you that the Sun JSF h:dataTable has the 'rows' attribute for that. I can also suggest you to just take a look in the TLD documentation of the component in question. There should be all possible attributes listed with a detailed explanation about the behaviour.

  • How To Restrict Number Of Rows For Multiple Group In Report Output

    Hi ,
    I have a requirement to restrict number of rows in report output.I have three different group , if i use same no of rows to restrict then output is as expected but if i want Deduction group should have 7 rows , earning should have 5 rows and Tax group have 3 rows in report output then XML tag is not working.
    Below is the XML tag i am using -
    First i have declare the variable to restrict the rows -
    <xsl:variable name="lpp" select="number(7)"/>
    <xsl:variable name="lpp1" select="number(5)"/>
    <xsl:variable name="lpp2" select="number(3)"/>
    For Each -
    <?for-each:PAYSLIP?>
    <xsl:variable xdofo:ctx="incontext" name="DedLines" select=".//AC_DEDUCTIONS"/>
    <xsl:variable xdofo:ctx="incontext" name="EarLines" select=".//AC_EARNINGS[ELEMENT_CLASSIFICATION!='Taxable Benefits']"/>
    <xsl:variable xdofo:ctx="incontext" name="EarTaxLines" select=".//AC_EARNINGS[ELEMENT_CLASSIFICATION='Taxable Benefits']>
    <?for-each:$DedLines?><?if:(position()-1) mod $lpp=0?> <xsl:variable name="start" xdofo:ctx="incontext" select="position()"/>
    <?if:(position()-1) mod $lpp1=0?><xsl:variable name="start1" xdofo:ctx="incontext" select="position()"/
    <?if:(position()-1) mod $lpp2=0?><xsl:variable name="start2" xdofo:ctx="incontext" select="position()"/>
    Report output is tabular form (one page has two column - Earning and Deduction ) . Tax group comes below earning group.
    Deduction Group -
    <?for-each-group:$DedLines;./REPORTING_NAME?><?if:position()>=$start and position()<$start+$lpp?>
    <?REPORTING_NAME?>
    <?end if?><?end for-each-group?>
    Earning Group -
    <?for-each-group:$EarLines;./REPORTING_NAME?><?if:position()>=$start1 and position()<$start1+$lpp1?>
    <?REPORTING_NAME?>
    <?end if?><?end for-each-group?>
    Tax Group -
    <?for-each-group:$EarTaxLines;./REPORTING_NAME?><?if:position()>=$start2 and position()<$start2+$lpp2?>
    <?REPORTING_NAME?>
    <?end if?><?end for-each-group?>
    Please let me know in case additional detail is require.
    Thanks in Advance.
    Thanks,
    Harsh
    Edited by: Harsh.rkg on Jan 14, 2013 9:43 PM

    variable lpp2 is declare to restrict EarTaxLines -
    <xsl:variable name="lpp2" select="number(2)"/>
    This will help to restrict the no of rows on one page , if we have more then two tax benefits line then layout will roll over to continuation page.
    As part of report output my expectation is if i restrict Earning , Deduction and Tax benefits to same no of line for example - variable lpp ,lpp1 and lpp2 have same value "number(2)" , we can see the layout is continue on next page (restrict every group can have max two lines) .This is the reason we have 4 header grid , deduction and Tax Benefit lines are rolled over to continuation page .But if we restrict different value for each variable then continuation page layout is missing .
    When we tried for <xsl:variable name="lpp2" select="number(3)"/> value continuation page layout is not getting generate for both employee number .

  • How to restrict number of rows returned in a query

    Hi frnds,
    I'd like to restrict number of rows returned by my query to some 10 rows. how to do that.When I try doing with the rownum<10 its giving results for a particular dept and that too some 6 rows only...btw I'm grouping my table and includes joins from many a table and am ordering the table results by a column.. How to do this..

    776317 wrote:
    Hi frnds,
    I'd like to restrict number of rows returned by my query to some 10 rows. how to do that.When I try doing with the rownum<10 its giving results for a particular dept and that too some 6 rows only...btw I'm grouping my table and includes joins from many a table and am ordering the table results by a column.. How to do this..
    TELL ME HOW MANY ROWS YOU HAVE IN TABLE?
    Because you have only *6 rows* in you column, if you less than 10 rows then it displays only containied/exist rows. nothing much
    select ename,empno from emp where rownum < 10;Thanks

  • How to restrict number of rows returned in BIP

    Hi Friends..
    How to restrict no of rows displayed by the report to some 10 rows for example.. in BIP

    If its in RTF you can use position to restrict.
    <?for-each:ROW[position()<11]?>
    You can also restrict it in your sql query using ROWNUM.

  • How to restrict number of row/lines in a table in RTF

    Hi,
    Im working on PO report. It has header information in the header part of RTF. But coming to the lines , I put that under a different group in the table in the body part of the RTF. I did a FOR loop for printing PO Lines because it does have multiple line information. But now i have to restrict the number of rows in that table per page irrespective of number of PO Lines. After printing 20 rows in the table, it should go to the next page. Im going through the other threads for the solution.
    Thanks,
    venkat

    There are so many thread regarding this ,
    pls go thru them patiently...
    logic is something like....
    use if condition and position() and say page-break..
    use for-each@section instead of for-each..so that the headed info is maintained with regards to PO lines
    happy searching...
    if you cant get still, last option send me mail with details

  • How To Restrict Number of Rows in BI Report

    Hi Experts
    I am on the way to generate a report which will be used to print the Levels.
    For this report i have the strict requirements of having size of each level. For example, In my query i have 3o rows which need to be printed as levels. As per the size i want to restrict the report to print 5 row in each page. so that in 6th row it will be moved to next page and so on.
    Can you please let me know how can i handle this in RTF. As restricting the same through SQL is not possible.
    Awaiting for your response.
    Srikant

    Hi ,
    Please check the following link that may helpful for u
    http://bipublisher.blogspot.com/2009/06/bi-publisher-conditionally-limiting.html
    Thanks,
    Ananth

  • PRINTER_FRIENDLY View and how to restrict number of rows

    Dear apex community,
    I am on the APEX 4.2 and OracleXE11g.
    I have created a page with the classic SQL report based on the table. The pagination style is "Row Ranges 1-15 16-30 (with set pagination)". Enable Partial Page Refresh: Yes.
    The table contains more than 1000 rows and the user can see on one report page only 30 and can navigate with pagination links.
    I have created for the user the PRINTER_FRIENDLY view of this page with "YES on the ninth place of the apex url. But now I have the following problem:
    - user navigates with pagination buttons and is actually on the page "31-60". The report shows him only 30 records.
    - user clicks on the link "PRINT" to call the printer friendly view of the page but the printer friendly page shows him not 30 records, but ALL (more than 1000) rows from the table.
    Is there any way to show on the printer friendly page only the records from the report?
    Best regards.

    S-Max wrote:
    @fac586,
    "+CSS print media style sheet on the standard page+". What is it???A print media style sheet is used to suppress unwanted page elements (tabs etc) from the printed output and optimize the formatting for print (e.g. smaller font sizes, including full URLs instead of links, page breaks etc).
    Simple example of suppressing unwanted APEX page elements using media style sheet: +{message:id=2475831}+

  • Restricting number of rows in a Pivot report

    Hi All,
    How to restrict number of rows per page in a Pivot layout.
    My report has 1000 rows and all are shown at once instead of having a next page button after every 25-50 rows as it is the case in tabular report.
    Pls Help!
    Thanks,
    Adi

    Thank you all for the help!
    --Adi                                                                                                                                                                                                                           

  • How to make a table to display perticular number of rows per page??

    Hi,
    Can anybody tell how to ristrict the number of rows per page in SSRS?
    I have a table in my report.I know we have to use" =Int(RowNumber(Nothing)/25)" in group expression.But I already have 3 group expression in my table.Where to write??
    Thanks.

    Hi Tony ,
    Just wanted to know will this solution work ;
    I am having a report and its using a grouping expression on “Group on 
    (=Field!Salelocation)” when it add another group on the details and have the page calculation such as (=Ceiling(RowNumber(Nothing)/20)) 
    and assign the page break at to the point of saving its ok , when trying to upload the report then it throws the following error .
    I have tried your solution trying to give the page calculation the upper group but still the following error comes back
    “A group expression for the grouping ‘table2_Group1’ uses the RowNumber function with a scope parameter that is not valid. When used in a group expression, the
    value of the scope parameter of RowNumber must equal the name of the group directly containing the current group. (rsInvalidGroupExpressionScope)
    Get Online Help
    A group expression for the grouping ‘table2_Group2’ uses the RowNumber   function with a scope parameter that is not valid. When
    used in a group   expression, the value of the scope parameter of RowNumber must equal the name   of the group directly containing the current group.   (rsInvalidGroupExpressionScope)
    Get Online Help
    Will you able to assist me on this.

  • How to set the number of rows per page dynamically

    Hello all,
    i urgent need the option to set the number of rows per page dynamically.
    I've got a parameter.
    In dependence of the value of this paramter i want to set the number of rows per page of a repeating frame.
    The Reports Builder version i use is 10.1.2.0.2
    I defined a report trigger.
    My code so far:
    function R_G_BEMERKUNGFormatTrigger return boolean is
    begin
    if :vYN_Display_one_per_page = 'Y' then
    --what i've to write right here??
    return (TRUE);
    else
         return (TRUE);
    end if;
    return (TRUE);
    end;
    Can anyone help me please??
    Best regards
    Florian

    Do you just need to change back and forth between 1 and some other number? If so, you can create two identical layouts, one with the "number of rows per page" preperty (on the repeating frame) set to 1 and the other layout set to whatever. You would have to have duplicate layouts for each group you wanted to do this with. Your format trigger on the outermost master group frame where num of rows was 1 would look like:
    function M_G_ename_GRPFRFormatTrigger return boolean is
    begin
      if :vYN_Display_one_per_page = 'Y'  then
        return (TRUE);
      else
        return (FALSE);
      end if;
    end;Your format trigger on the outermost master group frame where num of rows was whatever would look like:
    function M_G_ename_GRPFR1FormatTrigger return boolean is
    begin
      if :vYN_Display_one_per_page = 'N'  then
        return (TRUE);
      else
        return (FALSE);
      end if;
      return (TRUE);
    end;

  • How to restrict number of concurrent connections etc.

    Hi,
    I'm able to use wi-fi thru WRT54GC.
    I want to know:
    1. How to restrict number of users connecting to the wireless network that is setup thru my router?
    2. I also want to know about any monitoring software which can tell me about connected PCs, user names, bandwidth available, bandwidth utilized etc.
    Thanks in advance
    Rajeev

    1. logon to router's setup page, open I.E. and in the address bar type 192.168.1.1, it would ask for username and password, put "admin" default password without any username... click on the wireless tab >> wireless security >> try setting up wireless security as per the requirements, also you can setup wireless MAC filter and you can setup MAC address of wireless computers which you want to allow to coonect to the network...
    2. not quiet sure about monitoring software which would show you detail log about bandwidth, bandwidth utilized by each computer...however you should view router's logs from linksys "logviewer" utility...go to ftp.linksys.com/pub/network and download the "logviewer" utility.
    let me know if you have any issues.

  • How to restrict number of received e-mails

    how to restrict number of received e-mails at iOS 7 ( at previous iOS there were options to receive last 50 or 100 or 200 messages ) ??

    I have no idea which component you're talking about. If want to discuss here about a non-Sun JSF component, then please mention about the name, version and build in detail. You can also consider posting this question at the website/forum/mailinglist of the component manfacturer rather than here. At least I can tell you that the Sun JSF h:dataTable has the 'rows' attribute for that. I can also suggest you to just take a look in the TLD documentation of the component in question. There should be all possible attributes listed with a detailed explanation about the behaviour.

  • Restrict number of rows to be pulled from PeopleSoft's PS_LEDGER table while importing data in FDMEE

    Hi,
    We need to know if FDMEE 11.1.2.3.520 product supports restricting number of rows to be pulled from PeopleSoft's PS_LEDGER table.
    All the records fetched from PS_LEDGER is getting loaded into TDATASEG table.
    Currently, it is trying to pull all the records based on the given "period", "version" and "year" combination. We are looking to restrict rows based on specific account/entity/program/subprogram combination.
    If this is can be done, will it be an out-of-the-box functionality or does it require any customization/import scripts/api.
    Admin guide does say we can use Jython to filter rows using import scripts. However, it seems to be limited to file not a table as a source.
    I have attached a document with the screenshots so that the issue is better understood !
    Thanks,
    Hari

    1)
    When you set a column to hidden in a classic report using the method I described, it creates hidden form elements for that column.
    <tt><input type="hidden" name="f01" value="" id="f01_0002"></tt>
    You should inspect the source to figure out the name value.
    Since this belongs to the wwv_flow form, we can therefore get this data with: wwv_flow.f01
    Alternatively, you could have used the apex_item API to achieve the same result, which probably gives a bit better control.
    http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35127/apex_item.htm#CHDBFHGA
    select apex_item.hidden(1, col) || col col
    from table
    Set that column to a standard report column so it doesn't escape the html.
    You can also reference the data in these fields using PL/SQL using the apex_application API:
    http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35127/apex_app.htm#CHDGJBAB
    2)
    As above, setting the column to hidden creates hidden elements on the page. It is simply f01 because that is the only hidden field I would have on my page. With four reports on the page, you would need to be careful not to do the same on the other reports, as you would get inaccurate data. For each report, setting columns to hidden always starts with f01. In that, you would be best to use the apex_item API.
    I actually initially ran into this issue when i had a tabular form on the same page as a report with hidden fields, which was causing conflicts in the page processes.
    Hope it helps.

  • How to get number of rows return in SELECT query

    i'm very new in java, i have a question:
    - How to get number of rows return in SELECT query?
    (i use SQL Server 2000 Driver for JDBC and everything are done, i only want to know problems above)
    Thanks.

    make the result set scroll insensitve, do rs.last(), get the row num, and call rs.beforeFirst(), then you can process the result set like you currently do.
             String sql = "select * from testing";
             PreparedStatement ps =
              con.prepareStatement(sql,ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_READ_ONLY);
             ResultSet rs = ps.executeQuery();
             rs.last();
             System.out.println("Row count = " + rs.getRow());
             rs.beforeFirst();~Tim
    NOTE: Ugly, but does the trick.

Maybe you are looking for

  • Why can't l click and drag a photo from my pictures library to my iphone?

    I am trying to move photos from my laptop to my iphone.  I have tried clicking and dragging individual photos from my picture library to the iphone but l receive a message saying my iphone is not responding. I have tried syncing via itunes but when l

  • Firefox exe dont stop after closing the browser

    firstly i open firefox then when i want to close it i press the x button. it closes. but the firefox.exe process doesnt close. so my computer locks. the cpu usage raise 100%. i cant do anything. my solution is closing the process from the task manage

  • NLS Error on Second Fetch from Cursor

    Oracle 8i using PRO*C We have a UNIX (HP) environment (operational account) in which the NLS_LANG was not set for the shell. One of our applications opened a cursor for update and performed its first fetch. After processing it went back to fetch an a

  • Pay and Apps again?!!

    I buyed an App in january , after i intall IOS 5 i tryed to reinstall but  i  had to pay again!! why??  The app is VideoBrowser Facturado a:                               [email protected]                     Raul Rolando Rios           Calle Ave

  • Startup, Launch DVD loop, shutdown - how to do this?

    Thanks for any help here: I want to do a simple auto loop, where I basically have a mac that would start up every day at a certain time, launch QT or DVD player, then shut down at a certain time every day. Using the Control Panels scheduler isn't wor