How to restrict outbound calls to some destinations nos. only??
Hi,
I am using cisco 3845 router as voice gateway and running voice serice over that using E1 which is connected to a EPBX.
I am using only 3 dial-peers (2 for VoIP and other one is POTS). I have 20 sites with similar kind of setup and have 2 gatekeepers (primary-secondary) for their call routing.
To make config simple I have used ".T" as destination pattern with session IP of Gatekeepers for dial-peer VoIP in each gateway.
Now the demand of users of site "A" is that they don't want to talk site "B" and "D" because of their some security reasons.
And since I am using gatekeeper and ".T" as destination-pattern I am not able to prevent site site A to call site B and D whose destination nos. are "89" and "950" respectively and I don't want to create 18 different voip dial-peers because with increase in sites in future we will have to update the nos. of dial-peers.
Is there a any solution to that site A can call any site but B and D?
Thanks
Ashish
Replied with link below even if this forum would be more appropriate.
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=Video%20over%20IP&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1ddf47d3
Similar Messages
-
How can I video call with some one who doesnt have an iPhone?? I have the new iPhone 4s
How can I video call with someone who doesnt have and iPhone???? I have the new iPhone 4s
Hi get the app called Fring which allows you to do it as long as they have fring too
-
How to restrict outbound delivery at WM level
Hi all
We have a scenario where we need to restrict outbound delivery at WM level.
Right now delivery(delivery with respect to sale order ) is picking and confirming quantity even though stock is available at IM (just after GR stock is in interim storage type and TO is not confirmed) ..
It is version ECC 6.0
Regards
RaviHi Richard
Sorry for confusion. I mean to say system is confirming the stock not picking. You right TO will not create. But in our scenario, we want to restrict the system to create even delivery.
Actually we are creating delivery in background at the time of saving sales order. Now as per our requirement delivery should not be created if the stock is not available in WM.
Regards
Ravi -
How to restrict Intercompany Invoice getting generated for receive only trn
Hi All,
I have a businesss scenario, where there are two operating units (A and B) Intercompany shipping relationship is set between these two OU's
Operating Unit: A and Inventory Org: ZZ
Operating Unit: B and Inventory Org: DEF
1. If I have Sales order from A and shipped from B OU Inv org(DEF Inv org) , IC AR and IC AP gets generated and also End customer Invoice in A OU gets create
assume the above order was for 10 Qty shipment
at Inventory Logical transactions will be created in ZZ Inv org for 10 Qty shipment
now if the customer comes backs and says you have shipped 12 Qty and returns the 2 Qty, here we dont send any credit Invoice to customer so RMA Order line type is Receive only when you raise RMA order in OU A aganist DEF Inv org (OU B) and you receive the goods in DEF, system creates logical transactions in ZZ inv org which is in OU A and forcing to create IC AR and IC AP in both the OU's, how to restrict the same
Ideally its extra shipment done from DEF ware house and they are receiving back
Thanks in advance
Regards
KrishnaHi All,
I have a businesss scenario, where there are two operating units (A and B) Intercompany shipping relationship is set between these two OU's
Operating Unit: A and Inventory Org: ZZ
Operating Unit: B and Inventory Org: DEF
1. If I have Sales order from A and shipped from B OU Inv org(DEF Inv org) , IC AR and IC AP gets generated and also End customer Invoice in A OU gets create
assume the above order was for 10 Qty shipment
at Inventory Logical transactions will be created in ZZ Inv org for 10 Qty shipment
now if the customer comes backs and says you have shipped 12 Qty and returns the 2 Qty, here we dont send any credit Invoice to customer so RMA Order line type is Receive only when you raise RMA order in OU A aganist DEF Inv org (OU B) and you receive the goods in DEF, system creates logical transactions in ZZ inv org which is in OU A and forcing to create IC AR and IC AP in both the OU's, how to restrict the same
Ideally its extra shipment done from DEF ware house and they are receiving back
Thanks in advance
Regards
Krishna -
How to restrict the EBS end users to run only two same reports at a time?
Hi,
We are using EBS 12.0.6 and database 10.2.0.3.
Is it possible to restrict the end business users to run only two reports at a time?
OR
Is it possible to restrict the end business users to run only two same reports at a time?
Thanks.Is it possible to restrict the end business users to run only two same reports at a time?It is not possible.
You can either make the report "incompatible" to itself (this means only one user in your company can run it at a time)
Or not make it incompatible. (That means any user can run it any number of times)
Incompatibility is a way of specifying which requests cannot be run under which circumstances.
See http://download.oracle.com/docs/cd/A60725_05/html/comnls/us/fnd/incomp.htm
You can use Hussain's suggestion to use Concurrent: Active Request Limit profile. You can set this profile value at each user level. But if you decide to set it at global level, remember to keep it a higher value for sysadmin kind of users that run scheduled jobs.
Hope this helps,
Sandeep Gandhi -
How to restrict a user group of SQ01 for only execution for some users
Hi,
I would like to know if it is possible to restrict the access to SQ01 transaction for some users. I would like that these users have only execution access to some queries associated with an user group.
Do I have to associate the user group to the users I want to have access to it? How can I do it=
Do I have to associate the queries created on SQ01 to the users? or it is enough to assign the users to the user group where the queries are defined?
Do I have to associate the infosets created on SQ02 to the users? or it is enough to assign the users to the user group to which the infosets are associated?
Thank you,
Luz D.I suggest you do a web search on SQ01 and SQ02. That'll bring along SQ03 as well.
There's so much information available on the web that there's no reason to repeat it here.
[try google|http://www.google.com/search?hl=en&safe=off&q=SAPsq01sq02&meta=]
Jurjen -
How to restrict instance in swimlane to initiating User only?
Hi,
In my process, using BPM 11.1.1.6, there are two swimlanes. The first swimlane (SUBMITTER) allows a user to instantiate an instance, and after some service tasks, the user moves to the next human task, in the same lane. On submission, the instance moves to the second (APPROVER) swimlane. However, if the submitter has not yet submitted the second human task (say he just saves it) then ALL other SUBMITTERS in the same SUBMIITER lane, can see his data! Apparently, this is because the instance is given the SUBMITTER Role, and not assigned to the instantiating person.
How can we restrict the instance to be assigned or restricted ONLY to the instantiating user (during its life in the SUBMITTER Lane), so that other submitters cannot see his instance?
Any help is appreciated.
Thanks!
ps: We are instantiating the task via APIs, so we have flexibility to make an API call if we can know which API call will fix this. Thx.One thing you'd want to double check before continuing is to see how the predefined variable "creator" is set coming into the human task is set (not sure what this is set to when the API is used).
Assuming the "creator" (or some other string variable) is set to your initiator's userid, here are the steps to assign this person to the task in a subsequent human task.
1. Open the human task.
2. Click the "Assignment" tab.
3. Click the icon with the person in it -> click the "Edit" icon.
4. In the dropdown, select "Names and Expressions" -> make sure that the "Value-based" radio button is selected -> click the + icon on the right -> under "Identification Type" select "User" -> under "Data Type" select "By Expression" -> under "Value" click the "..." button.
5. Expand the "task" -> scroll down and select "task:creator" (or whatever string variable you have set to the userid of the person who created it in the API) -> click "Insert Into Expression" -> click "OK" -> "OK"
Hope this helps,
Dan -
How to restrict transaction PE03 (HR: Features) to display only mode?
We have a situation where a set of users need access to transaction PE03 to display HR Features. However they should not be changing any feature through it.
The only auth objects that are checked for this transaction seem to be s_tcode and p_tcode. As both this objects are checked during transaction start, there does not seem to be any check for display/change access.
Appreciate any inputs.....Thanks!> I was wondering if we could find an appropriate user exit and put in some custom code for checking the display/change access of the user. However, I am yet to find an exit to do this.
Just had a quick glance at the program and couldn't find anything fast either... that could say more about my abap reading skills than the program structure
I suggest you have an abaper look at it to see if it's easier to build a read-only copy of PE03 or create a report that delivers the same information. To find out if any user exit is available you could also give the HR forum a go.
Jurjen -
Outbound call failing with cause code 57
Hi,
our outbound calls to some numbers getting failed with cause code 57 and in ccsip messages i am getting 403 forbidden.
i tried to change the payload type to 97 which was 98 but no success.
the called number is 9-8955900
the calling number is 8062300
can any one help me..
the ccsip messages and ccapi inout debug is..
509022: *Jan 8 14:23:20.513: :FEATURE_VSA attributes are: feature_name:0,featur e_time:1255632752,feature_id:53127
509023: *Jan 8 14:23:20.513: //678454/xxxxxxxxxxxx/CCAPI/ccIFCallSetupRequestPr ivate:
SPI Call Setup Request Is Success; Interface Type=9, FlowMode=1
509024: *Jan 8 14:23:20.513: //678454/xxxxxxxxxxxx/CCAPI/ccCallSetContext:
Context=0x4AC5D304
509025: *Jan 8 14:23:20.517: //678454/xxxxxxxxxxxx/CCAPI/cc_api_call_connected:
Interface=0x48D4E620, Data Bitmask=0x0, Progress Indication=NULL(0),
Connection Handle=0
509026: *Jan 8 14:23:20.517: //678454/xxxxxxxxxxxx/CCAPI/cc_api_call_connected:
Call Entry(Connected=TRUE, Responsed=TRUE, Retry Count=0)
509027: *Jan 8 14:23:20.537: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/TCP 192.168.12.190:5060;branch=z9hG4bK6aded64034252
From: "Asif CIPC" <sip:[email protected]>;tag=2524413~70e9433b-1d79-44ae-9a16- 09a52be377c5-22878662
To: <sip:[email protected]>
Date: Wed, 08 Jan 2014 14:02:15 GMT
Call-ID: [email protected]
Supported: timer,resource-priority,replaces
Min-SE: 1800
User-Agent: Cisco-CUCM8.6
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
CSeq: 101 INVITE
Expires: 180
Allow-Events: presence
Supported: X-cisco-srtp-fallback
Supported: Geolocation
Cisco-Guid: 2031538944-0000065536-0000027607-3188500672
Session-Expires: 1800
P-Asserted-Identity: "Asif CIPC" <sip:[email protected]>
Remote-Party-ID: "Asif CIPC" <sip:[email protected]>;party=calling;screen=yes; privacy=off
Contact: <sip:[email protected]:5060;transport=tcp>
Max-Forwards: 70
Content-Type: application/sdp
Content-Length: 240
v=0
o=CiscoSystemsCCM-SIP 2524413 1 IN IP4 192.168.12.190
s=SIP Call
c=IN IP4 192.168.33.5
t=0 0
m=audio 17706 RTP/AVP 18 101
a=rtpmap:18 G729/8000
a=ptime:20
a=fmtp:18 annexb=no
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
509028: *Jan 8 14:23:20.553: //-1/7916D3000000/CCAPI/cc_api_display_ie_subfield s:
cc_api_call_setup_ind_common:
cisco-username=3064
----- ccCallInfo IE subfields -----
cisco-ani=3064
cisco-anitype=0
cisco-aniplan=0
cisco-anipi=0
cisco-anisi=1
dest=8955900
cisco-desttype=0
cisco-destplan=0
cisco-rdie=FFFFFFFF
cisco-rdn=
cisco-rdntype=0
cisco-rdnplan=0
cisco-rdnpi=-1
cisco-rdnsi=-1
cisco-redirectreason=-1 fwd_final_type =0
final_redirectNumber =
hunt_group_timeout =0
509029: *Jan 8 14:23:20.553: /
ASICO-DAM#/-1/7916D3000000/CCAPI/cc_api_call_setup_ind_common:
Interface=0x48667600, Call Info(
Calling Number=3064,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed),
Called Number=8955900(TON=Unknown, NPI=Unknown),
Calling Translated=FALSE, Subscriber Type Str=Unknown, FinalDestinationFlag=T RUE,
Incoming Dial-peer=1, Progress Indication=NULL(0), Calling IE Present=TRUE,
Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALS E), Call Id=678455
509030: *Jan 8 14:23:20.553: //-1/7916D3000000/CCAPI/ccCheckClipClir:
In: Calling Number=3064(TON=Unknown, NPI=Unknown, Screening=User, Passed, Pre sentation=Allowed)
509031: *Jan 8 14:23:20.553: //-1/7916D3000000/CCAPI/ccCheckClipClir:
Out: Calling Number=3064(TON=Unknown, NPI=Unknown, Screening=User, Passed, Pr esentation=Allowed)
509032: *Jan 8 14:23:20.553: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
509033: *Jan 8 14:23:20.553: :cc_get_feature_vsa malloc success
509034: *Jan 8 14:23:20.553: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
509035: *Jan 8 14:23:20.553: cc_get_feature_vsa count is 13
509036: *Jan 8 14:23:20.553: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
509037: *Jan 8 14:23:20.553: :FEATURE_VSA attributes are: feature_name:0,featur e_time:1255634768,feature_id:53128
509038: *Jan 8 14:23:20.553: //678455/7916D3000000/CCAPI/cc_api_call_setup_ind_ common:
Set Up Event Sent;
Call Info(Calling Number=3064(TON=Unknown, NPI=Unknown, Screening=User, Passe d, Presentation=Allowed),
Called Number=8955900(TON=Unknown, NPI=Unknown))
509039: *Jan 8 14:23:20.557: //678455/7916D3000000/CCAPI/cc_process_call_setup_ ind:
Event=0x48EE6200
509040: *Jan 8 14:23:20.557: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search:
Try with the demoted called number 8955900
509041: *Jan 8 14:23:20.561: //678455/7916D3000000/CCAPI/ccCallSetContext:
Context=0x476E35D0
509042: *Jan 8 14:23:20.561: //678455/7916D3000000/CCAPI/cc_process_call_setup_ ind:
>>>>CCAPI handed cid 678455 with tag 1 to app "_ManagedAppProcess_Default"
509043: *Jan 8 14:23:20.561: //678455/7916D3000000/CCAPI/ccCallProceeding:
Progress Indication=NULL(0)
509044: *Jan 8 14:23:20.565: //678455/7916D3000000/CCAPI/ccCallSetupRequest:
Destination=, Calling IE Present=TRUE, Mode=0,
Outgoing Dial-peer=20, Params=0x476E4AE0, Progress Indication=NULL(0)
509045: *Jan 8 14:23:20.565: //678455/7916D3000000/CCAPI/ccCheckClipClir:
In: Calling Number=8062301(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed)
509046: *Jan 8 14:23:20.565: //678455/7916D3000000/CCAPI/ccCheckClipClir:
Out: Calling Number=8062301(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed)
509047: *Jan 8 14:23:20.565: //678455/7916D3000000/CCAPI/ccCallSetupRequest:
Destination Pattern=.T, Called Number=8955900, Digit Strip=FALSE
509048: *Jan 8 14:23:20.565: //678455/7916D3000000/CCAPI/ccCallSetupRequest:
Calling Number=8062301(TON=Unknown, NPI=Unknown, Screening=User, Passed, Pres entation=Allowed),
Called Number=8955900(TON=Unknown, NPI=Unknown),
Redirect Number=, Display Info=Asif CIPC
Account Number=3064, Final Destination Flag=TRUE,
Guid=7916D300-0001-0000-0000-6BD7BE0CA8C0, Outgoing Dial-peer=20
509049: *Jan 8 14:23:20.565: //678455/7916D3000000/CCAPI/cc_api_display_ie_subf ields:
ccCallSetupRequest:
cisco-username=3064
----- ccCallInfo IE subfields -----
cisco-ani=8062301
cisco-anitype=0
cisco-aniplan=0
cisco-anipi=0
cisco-anisi=1
dest=8955900
cisco-desttype=0
cisco-destplan=0
cisco-rdie=FFFFFFFF
cisco-rdn=
cisco-rdntype=0
cisco-rdnplan=0
cisco-rdnpi=-1
cisco-rdnsi=-1
cisco-redirectreason=-1 fwd_final_type =0
final_redirectNumber =
hunt_group_timeout =0
509050: *Jan 8 14:23:20.569: //678455/7916D3000000/CCAPI/ccIFCallSetupRequestPr ivate:
Interface=0x48667600, Interface Type=3, Destination=, Mode=0x0,
Call Params(Calling Number=8062301,(Calling Name=Asif CIPC)(TON=Unknown, NPI= Unknown, Screening=User, Passed, Presentation=Allowed),
Called Number=8955900(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
Subscriber Type Str=Unknown, FinalDestinationFlag=TRUE, Outgoing Dial-peer=20 , Call Count On=FALSE,
Source Trkgrp Route Label=, Target Trkgrp Route Label=, tg_label_flag=0, Appl ication Call Id=)
509051: *Jan 8 14:23:20.569: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
509052: *Jan 8 14:23:20.569: :cc_get_feature_vsa malloc success
509053: *Jan 8 14:23:20.569: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
509054: *Jan 8 14:23:20.569: cc_get_feature_vsa count is 14
509055: *Jan 8 14:23:20.569: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
509056: *Jan 8 14:23:20.569: :FEATURE_VSA attributes are: feature_name:0,featur e_time:1255629840,feature_id:53129
509057: *Jan 8 14:23:20.569: //678456/7916D3000000/CCAPI/ccIFCallSetupRequestPr ivate:
SPI Call Setup Request Is Success; Interface Type=3, FlowMode=1
509058: *Jan 8 14:23:20.573: //678456/7916D3000000/CCAPI/ccCallSetContext:
Context=0x476E4A90
509059: *Jan 8 14:23:20.573: //678455/7916D3000000/CCAPI/ccSaveDialpeerTag:
Outgoing Dial-peer=20
509060: *Jan 8 14:23:20.577: //678456/7916D3000000/CCAPI/cc_api_call_proceeding :
Interface=0x48667600, Progress Indication=NULL(0)
509061: *Jan 8 14:23:20.585: //678456/7916D3000000/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 172..XX.XX.XX:5060;branch=z9hG4bK67CD11AE
Remote-Party-ID: "Asif CIPC" <sip:[email protected]>;party=calling;screen=ye s;privacy=off
From: "Asif CIPC" <sip:[email protected]>;tag=EA475228-24AE
To: <sip:[email protected]>
Date: Wed, 08 Jan 2014 14:23:20 GMT
Call-ID: [email protected]
Supported: timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 2031538944-0000065536-0000027607-3188500672
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIF Y, INFO, REGISTER
CSeq: 101 INVITE
Timestamp: 1389191000
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Max-Forwards: 69
Session-Expires: 1800
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 274
v=0
o=CiscoSystemsSIP-GW-UserAgent 5380 1731 IN IP4 172..XX.XX.XX
s=SIP Call
c=IN IP4 172..XX.XX.XX
t=0 0
m=audio 19502 RTP/AVP 18 101
c=IN IP4 172..XX.XX.XX
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:20
509062: *Jan 8 14:23:20.589: //678455/7916D3000000/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/TCP 192.168.12.190:5060;branch=z9hG4bK6aded64034252
From: "Asif CIPC" <sip:[email protected]>;tag=2524413~70e9433b-1d79-44ae-9a16- 09a52be377c5-22878662
To: <sip:[email protected]>
Date: Wed, 08 Jan 2014 14:23:20 GMT
Call-ID: [email protected]
CSeq: 101 INVITE
Allow-Events: kpml, telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
509063: *Jan 8 14:23:20.605: //678456/7916D3000000/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 172..XX.XX.XX:5060;branch=z9hG4bK67CD11AE
Call-ID: [email protected]
From: "Asif CIPC"<sip:[email protected]>;tag=EA475228-24AE
To: <sip:[email protected]>
CSeq: 101 INVITE
Content-Length: 0
509064: *Jan 8 14:23:20.677: //678456/7916D3000000/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 403 Forbidden
Via: SIP/2.0/UDP 172..XX.XX.XX:5060;branch=z9hG4bK67CD11AE
Record-Route: <sip:10.205.20.50:5060;transport=udp;lr>
Call-ID: [email protected]
From: "Asif CIPC"<sip:[email protected]>;tag=EA475228-24AE
To: <sip:[email protected]>;tag=sbc0804k7h28358
CSeq: 101 INVITE
Reason: Q.850;cause=57;text="bearer capability not authorized"
Warning: 399 - "SoftX3000 R601-CCU Rel POS:[3103] Release from CR"
Content-Length: 0
509065: *Jan 8 14:23:20.677: //678456/7916D3000000/CCAPI/cc_api_call_disconnect ed:
Cause Value=57, Interface=0x48667600, Call Id=678456
509066: *Jan 8 14:23:20.677: //678456/7916D3000000/CCAPI/cc_api_call_disconnect ed:
Call Entry(Responsed=TRUE, Cause Value=57, Retry Count=0)
509067: *Jan 8 14:23:20.681: //678455/7916D3000000/CCAPI/ccCallReleaseResources :
release reserved xcoding resource.
509068: *Jan 8 14:23:20.681: //678456/7916D3000000/CCAPI/ccCallSetAAA_Accountin g:
Accounting=0, Call Id=678456
509069: *Jan 8 14:23:20.681: //678456/7916D3000000/CCAPI/ccCallDisconnect:
Cause Value=57, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect C ause=57)
509070: *Jan 8 14:23:20.681: //678456/7916D3000000/CCAPI/ccCallDisconnect:
Cause Value=57, Call Entry(Responsed=TRUE, Cause Value=57)
509071: *Jan 8 14:23:20.681: //678456/7916D3000000/CCAPI/cc_api_call_disconnect _done:
Disposition=0, Interface=0x48667600, Tag=0x0, Call Id=678456,
Call Entry(Disconnect Cause=57, Voice Class Cause Code=0, Retry Count=0)
509072: *Jan 8 14:23:20.685: //678456/7916D3000000/CCAPI/cc_api_call_disconnect _done:
Call Disconnect Event Sent
509073: *Jan 8 14:23:20.685: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
509074: *Jan 8 14:23:20.685: :cc_free_feature_vsa freeing 4AD76408
509075: *Jan 8 14:23:20.685: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
509076: *Jan 8 14:23:20.685: vsacount in free is 13
509077: *Jan 8 14:23:20.685: //678455/7916D3000000/CCAPI/ccCallDisconnect:
Cause Value=57, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect C ause=0)
509078: *Jan 8 14:23:20.689: //678455/7916D3000000/CCAPI/ccCallDisconnect:
Cause Value=57, Call Entry(Responsed=TRUE, Cause Value=57)
509079: *Jan 8 14:23:20.693: //678455/7916D3000000/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 403 Forbidden
Via: SIP/2.0/TCP 192.168.12.190:5060;branch=z9hG4bK6aded64034252
From: "Asif CIPC" <sip:[email protected]>;tag=2524413~70e9433b-1d79-44ae-9a16- 09a52be377c5-22878662
To: <sip:[email protected]>;tag=EA475298-106E
Date: Wed, 08 Jan 2014 14:23:20 GMT
Call-ID: [email protected]
CSeq: 101 INVITE
Allow-Events: kpml, telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Reason: Q.850;cause=57
Content-Length: 0
509080: *Jan 8 14:23:20.693: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 172..XX.XX.XX:5060;branch=z9hG4bK67CD11AE
From: "Asif CIPC" <sip:[email protected]>;tag=EA475228-24AE
To: <sip:[email protected]>;tag=sbc0804k7h28358
Date: Wed, 08 Jan 2014 14:23:20 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: telephone-event
Content-Length: 0
509081: *Jan 8 14:23:20.709: //678454/xxxxxxxxxxxx/CCAPI/ccCallDisconnect:
Cause Value=0, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Ca use=0)
509082: *Jan 8 14:23:20.709: //678454/xxxxxxxxxxxx/CCAPI/ccCallDisconnect:
Cause Value=0, Call Entry(Responsed=TRUE, Cause Value=0)
509083: *Jan 8 14:23:20.709: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/TCP 192.168.12.190:5060;branch=z9hG4bK6aded64034252
From: "Asif CIPC" <sip:[email protected]>;tag=2524413~70e9433b-1d79-44ae-9a16- 09a52be377c5-22878662
To: <sip:[email protected]>;tag=EA475298-106E
Date: Wed, 08 Jan 2014 14:02:15 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: presence
Content-Length: 0
509084: *Jan 8 14:23:20.713: //678455/7916D3000000/CCAPI/cc_api_call_disconnect _done:
Disposition=0, Interface=0x48667600, Tag=0x0, Call Id=678455,
Call Entry(Disconnect Cause=57, Voice Class Cause Code=0, Retry Count=0)
509085: *Jan 8 14:23:20.717: //678455/7916D3000000/CCAPI/cc_api_call_disconnect _done:
Call Disconnect Event Sent
509086: *Jan 8 14:23:20.717: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
509087: *Jan 8 14:23:20.717: :cc_free_feature_vsa freeing 4AD77748
509088: *Jan 8 14:23:20.717: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
509089: *Jan 8 14:23:20.717: vsacount in free is 12
509090: *Jan 8 14:23:20.721: //678454/xxxxxxxxxxxx/CCAPI/cc_api_call_disconnect _done:
Disposition=0, Interface=0x48D4E620, Tag=0x0, Call Id=678454,
Call Entry(Disconnect Cause=0, Voice Class Cause Code=0, Retry Count=0)
509091: *Jan 8 14:23:20.721: //678454/xxxxxxxxxxxx/CCAPI/cc_api_call_disconnect _done:
Call Disconnect Event Sent
509092: *Jan 8 14:23:20.721: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
509093: *Jan 8 14:23:20.721: :cc_free_feature_vsa freeing 4AD76F68
509094: *Jan 8 14:23:20.721: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
509095: *Jan 8 14:23:20.721: vsacount in free is 11
509096: *Jan 8 14:23:20.725: //-1/xxxxxxxxxxxx/CCAPI/ccIFCallSetupRequestPrivat e:
Interface=0x48D4E620, Interface Type=9, Destination=0.0.0.0, Mode=0x0,
Call Params(Calling Number=,(Calling Name=)(TON=Unknown, NPI=Unknown, Screeni ng=Not Screened, Presentation=Allowed),
Called Number=(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
Subscriber Type Str=, FinalDestinationFlag=FALSE, Outgoing Dial-peer=0, Call Count On=FALSE,
Source Trkgrp Route Label=, Target Trkgrp Route Label=, tg_label_flag=0, Appl ication Call Id=)
509097: *Jan 8 14:23:20.725: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
509098: *Jan 8 14:23:20.725: :cc_get_feature_vsa malloc success
509099: *Jan 8 14:23:20.725: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
509100: *Jan 8 14:23:20.729: cc_get_feature_vsa count is 12
509101: *Jan 8 14:23:20.729: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
509102: *Jan 8 14:23:20.729: :FEATURE_VSA attributes are: feature_name:0,featur e_time:1255632752,feature_id:53130
509103: *Jan 8 14:23:20.729: //678457/xxxxxxxxxxxx/CCAPI/ccIFCallSetupRequestPr ivate:
SPI Call Setup Request Is Success; Interface Type=9, FlowMode=1
509104: *Jan 8 14:23:20.729: //678457/xxxxxxxxxxxx/CCAPI/ccCallSetContext:
Context=0x4AC5D1C4
509105: *Jan 8 14:23:20.729: //678457/xxxxxxxxxxxx/CCAPI/cc_api_call_connected:
Interface=0x48D4E620, Data Bitmask=0x0, Progress Indication=NULL(0),
Connection Handle=0
509106: *Jan 8 14:23:20.729: //678457/xxxxxxxxxxxx/CCAPI/cc_api_call_connected:
Call Entry(Connected=TRUE, Responsed=TRUE, Retry Count=0)
509107: *Jan 8 14:23:20.753: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/TCP 192.168.12.190:5060;branch=z9hG4bK6adee3e42a498
From: "Asif CIPC" <sip:[email protected]>;tag=2524415~70e9433b-1d79-44ae-9a16- 09a52be377c5-22878662
To: <sip:[email protected]>
Date: Wed, 08 Jan 2014 14:02:15 GMT
Call-ID: [email protected]
Supported: timer,resource-priority,replaces
Min-SE: 1800
User-Agent: Cisco-CUCM8.6
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
CSeq: 101 INVITE
Expires: 180
Allow-Events: presence
Supported: X-cisco-srtp-fallback
Supported: Geolocation
Cisco-Guid: 2031538944-0000065536-0000027608-3188500672
Session-Expires: 1800
P-Asserted-Identity: "Asif CIPC" <sip:[email protected]>
Remote-Party-ID: "Asif CIPC" <sip:[email protected]>;party=calling;screen=yes; privacy=off
Contact: <sip:[email protected]:5060;transport=tcp>
Max-Forwards: 70
Content-Type: application/sdp
Content-Length: 240
v=0
o=CiscoSystemsCCM-SIP 2524415 1 IN IP4 192.168.12.190
s=SIP Call
c=IN IP4 192.168.33.5
t=0 0
m=audio 17932 RTP/AVP 18 101
a=rtpmap:18 G729/8000
a=ptime:20
a=fmtp:18 annexb=no
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
509108: *Jan 8 14:23:20.769: //-1/7916D3000000/CCAPI/cc_api_display_ie_subfield s:
cc_api_call_setup_ind_common:
cisco-username=3064
----- ccCallInfo IE subfields -----
cisco-ani=3064
cisco-anitype=0
cisco-aniplan=0
cisco-anipi=0
cisco-anisi=1
dest=8955900
cisco-desttype=0
cisco-destplan=0
cisco-rdie=FFFFFFFF
cisco-rdn=
cisco-rdntype=0
cisco-rdnplan=0
cisco-rdnpi=-1
cisco-rdnsi=-1
cisco-redirectreason=-1 fwd_final_type =0
final_redirectNumber =
hunt_group_timeout =0
509109: *Jan 8 14:23:20.769: //-1/7916D3000000/CCAPI/cc_api_call_setup_ind_comm on:
Interface=0x48667600, Call Info(
Calling Number=3064,(Calling Name=)(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed),
Called Number=8955900(TON=Unknown, NPI=Unknown),
Calling Translated=FALSE, Subscriber Type Str=Unknown, FinalDestinationFlag=T RUE,
Incoming Dial-peer=1, Progress Indication=NULL(0), Calling IE Present=TRUE,
Source Trkgrp Route Label=, Target Trkgrp Route Label=, CLID Transparent=FALS E), Call Id=678458
509110: *Jan 8 14:23:20.769: //-1/7916D3000000/CCAPI/ccCheckClipClir:
In: Calling Number=3064(TON=Unknown, NPI=Unknown, Screening=User, Passed, Pre sentation=Allowed)
509111: *Jan 8 14:23:20.773: //-1/7916D3000000/CCAPI/ccCheckClipClir:
Out: Calling Number=3064(TON=Unknown, NPI=Unknown, Screening=User, Passed, Pr esentation=Allowed)
509112: *Jan 8 14:23:20.773: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
509113: *Jan 8 14:23:20.773: :cc_get_feature_vsa malloc success
509114: *Jan 8 14:23:20.773: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
509115: *Jan 8 14:23:20.773: cc_get_feature_vsa count is 13
509116: *Jan 8 14:23:20.773: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
509117: *Jan 8 14:23:20.773: :FEATURE_VSA attributes are: feature_name:0,featur e_time:1255634768,feature_id:53131
509118: *Jan 8 14:23:20.773: //678458/7916D3000000/CCAPI/cc_api_call_setup_ind_ common:
Set Up Event Sent;
Call Info(Calling Number=3064(TON=Unknown, NPI=Unknown, Screening=User, Passe d, Presentation=Allowed),
Called Number=8955900(TON=Unknown, NPI=Unknown))
509119: *Jan 8 14:23:20.773: //678458/7916D3000000/CCAPI/cc_process_call_setup_ ind:
Event=0x48EE6200
509120: *Jan 8 14:23:20.777: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_match_search:
Try with the demoted called number 8955900
509121: *Jan 8 14:23:20.777: //678458/7916D3000000/CCAPI/ccCallSetContext:
Context=0x476D5190
509122: *Jan 8 14:23:20.777: //678458/7916D3000000/CCAPI/cc_process_call_setup_ ind:
>>>>CCAPI handed cid 678458 with tag 1 to app "_ManagedAppProcess_Default"
509123: *Jan 8 14:23:20.777: //678458/7916D3000000/CCAPI/ccCallProceeding:
Progress Indication=NULL(0)
509124: *Jan 8 14:23:20.781: //678458/7916D3000000/CCAPI/ccCallSetupRequest:
Destination=, Calling IE Present=TRUE, Mode=0,
Outgoing Dial-peer=20, Params=0x476DCE60, Progress Indication=NULL(0)
509125: *Jan 8 14:23:20.781: //678458/7916D3000000/CCAPI/ccCheckClipClir:
In: Calling Number=8062301(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed)
509126: *Jan 8 14:23:20.781: //678458/7916D3000000/CCAPI/ccCheckClipClir:
Out: Calling Number=8062301(TON=Unknown, NPI=Unknown, Screening=User, Passed, Presentation=Allowed)
509127: *Jan 8 14:23:20.785: //678458/7916D3000000/CCAPI/ccCallSetupRequest:
Destination Pattern=.T, Called Number=8955900, Digit Strip=FALSE
509128: *Jan 8 14:23:20.785: //678458/7916D3000000/CCAPI/ccCallSetupRequest:
Calling Number=8062301(TON=Unknown, NPI=Unknown, Screening=User, Passed, Pres entation=Allowed),
Called Number=8955900(TON=Unknown, NPI=Unknown),
Redirect Number=, Display Info=Asif CIPC
Account Number=3064, Final Destination Flag=TRUE,
Guid=7916D300-0001-0000-0000-6BD8BE0CA8C0, Outgoing Dial-peer=20
509129: *Jan 8 14:23:20.785: //678458/7916D3000000/CCAPI/cc_api_display_ie_subf ields:
ccCallSetupRequest:
cisco-username=3064
----- ccCallInfo IE subfields -----
cisco-ani=8062301
cisco-anitype=0
cisco-aniplan=0
cisco-anipi=0
cisco-anisi=1
dest=8955900
cisco-desttype=0
cisco-destplan=0
cisco-rdie=FFFFFFFF
cisco-rdn=
cisco-rdntype=0
cisco-rdnplan=0
cisco-rdnpi=-1
cisco-rdnsi=-1
cisco-redirectreason=-1 fwd_final_type =0
final_redirectNumber =
hunt_group_timeout =0
509130: *Jan 8 14:23:20.785: //678458/7916D3000000/CCAPI/ccIFCallSetupRequestPr ivate:
Interface=0x48667600, Interface Type=3, Destination=, Mode=0x0,
Call Params(Calling Number=8062301,(Calling Name=Asif CIPC)(TON=Unknown, NPI= Unknown, Screening=User, Passed, Presentation=Allowed),
Called Number=8955900(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
Subscriber Type Str=Unknown, FinalDestinationFlag=TRUE, Outgoing Dial-peer=20 , Call Count On=FALSE,
Source Trkgrp Route Label=, Target Trkgrp Route Label=, tg_label_flag=0, Appl ication Call Id=)
509131: *Jan 8 14:23:20.785: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
509132: *Jan 8 14:23:20.785: :cc_get_feature_vsa malloc success
509133: *Jan 8 14:23:20.785: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
509134: *Jan 8 14:23:20.785: cc_get_feature_vsa count is 14
509135: *Jan 8 14:23:20.785: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
509136: *Jan 8 14:23:20.785: :FEATURE_VSA attributes are: feature_name:0,featur e_time:1255629840,feature_id:53132
509137: *Jan 8 14:23:20.789: //678459/7916D3000000/CCAPI/ccIFCallSetupRequestPr ivate:
SPI Call Setup Request Is Success; Interface Type=3, FlowMode=1
509138: *Jan 8 14:23:20.789: //678459/7916D3000000/CCAPI/ccCallSetContext:
Context=0x476DCE10
509139: *Jan 8 14:23:20.789: //678458/7916D3000000/CCAPI/ccSaveDialpeerTag:
Outgoing Dial-peer=20
509140: *Jan 8 14:23:20.793: //678459/7916D3000000/CCAPI/cc_api_call_proceeding :
Interface=0x48667600, Progress Indication=NULL(0)
509141: *Jan 8 14:23:20.801: //678459/7916D3000000/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 172..XX.XX.XX:5060;branch=z9hG4bK67CE197B
Remote-Party-ID: "Asif CIPC" <sip:[email protected]>;party=calling;screen=ye s;privacy=off
From: "Asif CIPC" <sip:[email protected]>;tag=EA475304-26C5
To: <sip:[email protected]>
Date: Wed, 08 Jan 2014 14:23:20 GMT
Call-ID: [email protected]
Supported: timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 2031538944-0000065536-0000027608-3188500672
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIF Y, INFO, REGISTER
CSeq: 101 INVITE
Timestamp: 1389191000
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Max-Forwards: 69
Session-Expires: 1800
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 274
v=0
o=CiscoSystemsSIP-GW-UserAgent 9218 9584 IN IP4 172..XX.XX.XX
s=SIP Call
c=IN IP4 172..XX.XX.XX
t=0 0
m=audio 16868 RTP/AVP 18 101
c=IN IP4 172..XX.XX.XX
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:20
509142: *Jan 8 14:23:20.805: //678458/7916D3000000/SIP/Msg/ccsipDisplayMsg:
Sent:
509163: *Jan 8 14:23:20.945: //678458/7916D3000000/CCAPI/cc_api_call_disconnect _done:
Call Disconnect Event Sent
509164: *Jan 8 14:23:20.945: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
509165: *Jan 8 14:23:20.945: :cc_free_feature_vsa freeing 4AD77748
509166: *Jan 8 14:23:20.945: //-1/xxxxxxxxxxxx/CCAPI/cc_free_feature_vsa:
509167: *Jan 8 14:23:20.945: vsacount in free is 12
509168: *Jan 8 14:23:32.517: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
OPTIONS sip:172..XX.XX.XX:5060 SIP/2.0
Via: SIP/2.0/UDP 10.205.20.50:5060;branch=z9hG4bKhs8ak5845ch42p7cff35k1ap3T02677
Call-ID: isbchh12748fcsk155w58p151kks36fww24s@SoftX3000
From: <sip:172..XX.XX.XX:5060>;tag=sbc0806pa8fp7w7
To: <sip:172..XX.XX.XX>
CSeq: 1 OPTIONS
Max-Forwards: 70
Content-Length: 0
509169: *Jan 8 14:23:32.525: //678460/495AB05FB187/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.205.20.50:5060;branch=z9hG4bKhs8ak5845ch42p7cff35k1ap3T02677
From: <sip:172..XX.XX.XX:5060>;tag=sbc0806pa8fp7w7
To: <sip:172..XX.XX.XX>;tag=EA4780CC-582
Date: Wed, 08 Jan 2014 14:23:32 GMT
Call-ID: isbchh12748fcsk155w58p151kks36fww24s@SoftX3000
Server: Cisco-SIPGateway/IOS-12.x
CSeq: 1 OPTIONS
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIF Y, INFO, REGISTER
Allow-Events: telephone-event
Accept: application/sdp
Supported: timer,resource-priority,replaces,sdp-anat
Content-Type: application/sdp
Content-Length: 170
v=0
o=CiscoSystemsSIP-GW-UserAgent 8937 2437 IN IP4 172..XX.XX.XX
s=SIP Call
c=IN IP4 192.168.33.5
t=0 0
m=audio 0 RTP/AVP 18 0 8 9 4 2 15 3
c=IN IP4 192.168.33.5
u all
and the config is
voice service voip
ip address trusted list
ipv4 172.XX.XX.XX 255.255.255.255
dtmf-interworking rtp-nte
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
no supplementary-service h450.2
no supplementary-service h450.3
no supplementary-service h225-notify cid-update
redirect ip2ip
h323
session transport udp
h245 tunnel disable
sip
session transport tcp
rel1xx disable
registrar server expires max 3600 min 3500
transport switch udp tcp
redirect contact order best-match
asymmetric payload full
g729 annexb-all
voice class codec 1
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 3 g729r8
codec preference 4 g729br8
and the dial-peer through the calls will go out is
dial-peer voice 20 voip
description ***TO-OUT***
translation-profile outgoing OUT-SIP
destination-pattern .T
progress_ind progress enable 8
rtp payload-type cisco-codec-fax-ack 112
rtp payload-type nte 97
session protocol sipv2
session target ipv4:10.205.20.50:5060
session transport udp
voice-class codec 1
voice-class sip bind control source-interface FastEthernet0/0
voice-class sip bind media source-interface FastEthernet0/0
dtmf-relay rtp-nte
no vadHi Nadeem,
our setup is like
vpn link
call manager ------head office(router)----------------------------------brach router(gateway)------------------ip phone(branch)
The call flow is
sip
IP Phone---->brach GW-------------->call manager------------------>branch GW------------------->ITSP
there is no subscriber at branch side, so the outbound call should travel to call manager at head office and then get exit from branch gateway to ITSP through sip line. -
Group Skype call with some telephone numbers
Hi there, I need to make a group Skype video call but some participants can only join by telephone. If I create a 'group' that has a mix of Skype account and telephone numbers, will the call still work? Do I need to make this a video call or a audio call only for it to work? Thanks!
Kanev75 wrote:
The question of sending SMS to a group of contacts with multiple phone numbers.
Is very important for the job.
On the Z30 create a contact group.
Some members from a group only one phone number (no problems with them), and some contacts with several phone numbers (mobile, work, home, another mobile).
When sending SMS to a group there is a problem with the contacts with multiple numbers, are inserted numbers are not mobile phone, such as a working city.
How can I fix it or specify a phone number to use by default for sending SMS?
The contact(s) with multiple phone numbers, are linked? -
How to restrict some users from viewing a screen of standard transaction
Hi All,
I need to restrict certain user ids from viewing the 'Payment Transactions' screen for the below mentioned transactions.
FK01, FK02, FK03, MK01, MK02, MK03, XK01, XK02, XK03
The Basis consultant has tried to configure it. However its not working. So need to find other solution.
For all transactions other than FK01, MK01, XK01 (create vendor), the BAdi GOS_SRV_SELECT is called before the payment transaction screen appears. But for transactions FK01, MK01and XK0, no such BAdi is there.
Also I'm not able to figure out how to restrict that particular screen using Badi GOS_SRV_SELECT. What will be the service name for this?
Please help !!!
Thanks in advance,
Radhikahi,
u can do this using user exits.
identify the appropriate exit for ur transaction and thn put condition like
if username = ...
loop at screen.
hide..
endloop.
i was just trying to give u some hint .make it to ur best.
reward if hlpful. -
I just downloaded the latest version of firefox (5.0). Can I delete all the older versions that are still on my drive?
When I call up some web sites sometimes the web site comes up 3 or 4 times...how do I stop this from happening? For example if I click on a link the exact same link comes up 3 or 4 times and I have to manually delete all of them but one.Do you organise your email into separate folders, or do you just let it accumulate in the Inbox?
I would strongly advise you not to let it sit in the Inbox.
When you see this happening, try right-click on the affected folder, select '''Properties''' then '''Repair Folder'''.
Large folders (actually, a folder in Thunderbird is stored as a file, so it is sensitive to file size limits set by the underlying file system) can be problematic. This is one reason not to let messages collect in one folder. I use Thunderbird's Archive folders so that accumulated mails over several years can happily coexist because they are effectively stored in many small folders. No single mail store folder then exceeds the 2GB or 4GB sizes that have been known to stress the OS. I appreciate that current builds of Thunderbird and a modern 64-bit OS should be able to cope, but practically I find it slows down when given huge files, so I err towards a pragmatic solution; a large number of not very big files.
Archives are searchable, and a Saved Search folder can give you a virtual composite folder allowing access to the entire Archive. -
How to Restrict some G/L accounts to 3 Users only
Dear All,
Please tell me how to restrict SAP Users not to access some(around 20)G/L accounts, and the same should be accessiable by 3 Users.
Thanks in advance.
Regards,
Veda GandhamAuthorization object to G/L accounts
F_BKPF_BUK for restriction by company code
F_BKPF_GSB for restriction by business area
F_BKPF_KOA for restriction by account type
Maintain the user role in PFCJ and then assign it in su01
Regards -
In UCCE TCD table how to indentify inbound and outbound call records.
Hi
I'm using TCD table to build custom report. I would like to know is there any flag to differentiate Inbound and outbound call records in TCD table.
Please advice.. I would be much appreciated.
Thanks
Regards,
ParamHi Geoff and David
Thanks you very much for your reply.
I have used "PeripheralID" to classify the call.
Thanks
Regards,
Param -
Cisco Jabber for Windows in Extend and Connect mode and making outbound calls
Hi guys,
I've set up Cisco Jabber for Windows to use Extend and Connect to control a remote PBX endpoint. I've configured the required CTI-RD device, remote destinations, associated the users to the line and added the devices to end-user controlled device. The extend and connect part is working flawlessly without any issues. I'm able to receive inbound calls on the remote PBX endpoint and control the call (hold, resume, transfer etc.) using the Jabber call window that pops up.
However, I'm unable to make any outbound calls via the Jabber client when in extend and Connect mode. Reading the Extend and Connect guide, I need to configure Dial Via Office (DVO) Reverse. So when the user initiates a Dial-Via-Office reverse call, CUCM calls and connect to the Extend and Connect device (CTI-RD). CUCM then calls and connects to the number the user dialled and finally connects the two call legs.
After attempting to configure DVO-R for Jabber for Windows in Extend and Connect mode following the CUCM feature services guide, i'm unable to get any outbound calls working. From RTMT, i am receiving the following Termination Cause Code: (27) Destination out of order. What i also notice is that there is no calling number for that trace either. I would've thought that the calling party would've been the Enterprise Feature Access (EFA) number.
Has anyone got this working or can provide some guidance?
Thanks.Hi guys,
I've set up Cisco Jabber for Windows to use Extend and Connect to control a remote PBX endpoint. I've configured the required CTI-RD device, remote destinations, associated the users to the line and added the devices to end-user controlled device. The extend and connect part is working flawlessly without any issues. I'm able to receive inbound calls on the remote PBX endpoint and control the call (hold, resume, transfer etc.) using the Jabber call window that pops up.
However, I'm unable to make any outbound calls via the Jabber client when in extend and Connect mode. Reading the Extend and Connect guide, I need to configure Dial Via Office (DVO) Reverse. So when the user initiates a Dial-Via-Office reverse call, CUCM calls and connect to the Extend and Connect device (CTI-RD). CUCM then calls and connects to the number the user dialled and finally connects the two call legs.
After attempting to configure DVO-R for Jabber for Windows in Extend and Connect mode following the CUCM feature services guide, i'm unable to get any outbound calls working. From RTMT, i am receiving the following Termination Cause Code: (27) Destination out of order. What i also notice is that there is no calling number for that trace either. I would've thought that the calling party would've been the Enterprise Feature Access (EFA) number.
Has anyone got this working or can provide some guidance?
Thanks.
Maybe you are looking for
-
Implicit vs explicit close of resultsets and statements?
Hi friends.I am a newbie Java Developer..Okay Here goes I have just made a LAN based Java application using Swing,JDBC with backend as MS-Access..The backend is on a shared network drive.. The application is distributed as jar files on the LAN PCs..
-
A problem with regex and special characters
Hello, I am using regex in my application but i have a problem with special characters. Here is the explanation of what i am doing: I have a certain piece of text that i want to parse and replace every occurrence of a given word with some sort of a t
-
Hi Experts, I am new to BPM. Past I worked on Dynpro with JAVA only. Now I am assign to BPM Application. So I need Some Information about BPM. We are using CE 7.1 1. What is BPM? What is Use of BPM? 2. Where we can use the BPM Applications?
-
Time compression and Pan & Scan
Hi I'm editing a PPV special, and the networks are requesting that the Sony Digibeta Master be "time compressed when available." Is "time compression" a feature in FCP, or is it a feature on the Digitbeta interface only (like the 7.5 IRE NTSC setting
-
Our company still uses FrameMaker 5.5. I'm having an art issue. We put color in the background (on the master page). All art that is linked in the flow of the book has a white box around it. All of the art is Illustrator lineart saved as an eps.