How to Restrict the consumer data flow from CRM to R/3

Hi Experts
I have a scenario where my client doesn't wish to flow consumers data into R/3 which are created in CRM's B2C shop.He wants to map consumer data with R/3 One time customers so that further process such as Delivery  and all take place and this status gets updated in B2C shop via CRM
hence i request you all could you please help me to solve my issue
i would appreciate you help
Thanking you in advance
Regards
Rao.

Hi Mark
thanks very much for you reply
See my scenario is i have set up the B2C SHOP  in CRM not in ECC  as and when consumer gets  register in B2C SHOP  he creates an Order,  so standard functionality is that  CRM  Order needs to flow into R/3 along with  consumer data such as (sold_to,ship_to_bill_to---) for further process like delivery and billing.
Now my requirement is client does not wish consumer data should be flown into R/3 for which he wants to map consumer data which is created in CRM to  R/3 with One Time customer for delivery, so that when ever consumer gets created in B2C SHOP it should map with the same R/3 One time customers
which means that very time one time customer data should be replaced with consumer data which are created in B2C shop.and delivery should take place
so could you please help me is there any way to resolve my issue
Thanking you
Regards
Rao

Similar Messages

  • How to remove the system data details from the overview tab in crmd_order?

    Hi All,
    How to remove the system data details from the overview tab in crmd_order?

    Hi,
    It is a standard functionality. Those information will be very useful when you send a message to SAP.
    If you still want to remove them, raise an OSS message.
    Regards,
    Rajesh Kumar

  • Data Flow from CRM to BW

    Dear SAP Experts,
    Greetings for the Day!
    I am looking forward for some information on the Data flow happening from CRM to BW system. Some of the few queries are as below:
    Do we have any settings for this data flow in Transaction SMOEAC.
    How does the below setting impact the BDOC flow in BW. Also, if we un-check the “Do Not Snd”, will BDOCs
    flow to BW system ? <PFA>
    PS: We are on CRM 7.0 with EHP2.
    Thanks!
    Regards,
    Kanika

    Hi Kanika,
    Data flow from CRM to BW happens via XIF using IDocs. You can check in transaction WE21 for your RFC destination of BW and the output parameters, which decides what data would be send to the corresponding destination.
    You can also check my blog:
    External Interface (XIF) Setup but this is XIF setup in general and not specific to BW.
    Hope this helps.
    Best Regards,
    Shanthala.

  • How to customize the synchronization of CONTACT from CRM to Louts-notes

    hi，expert
    Could anybody teach me how to customize the synchronization of CONTACT from CRM to Louts-notes?I would like to know the
    difference from activity synchronization,and on what condition the sync. could realize.
    Besides,there also need to customize the TASK synchronization. I know task is kind of activity,but we use the standard activity
    as appoitment. So far as I know,the standard task in SAP isn't appoitment.So I doubt if the task customization in synchronization
    will be the same as activity did?

    You have to edit synchronization settings. You can do it from CRM side under Personalization or from groupware client side under Tools. You have several options:
    - synchronize just "own" contacts (contacts that are linked with you with relationship BUR011)
    - synchronize contacts of "own" accounts (contacts that are linked with accounts that are linked with you with relationship BUR011)
    - contact of specific country
    Task is similar as appointment but it uses different bol object - appointment uses but2000126 while task uses but2000125. Customization is similar. You mainly have to create transaction type for task and you have to define different default settings under spro>crm>crm middleware and related components>client-based groupware integratuion>settings for client-based synchronization. For task you must set values for: DEFAULT_TASK_PROC_TYPE, DEFAULT_TASK_TEXTTYPE, DEFAULT_TASK_OPEN, DEFAULT_TASK_INPROCESS, DEFAULT_TASK_COMPLETED, DEFAULT_TASK_CANCELLED.
    Regards.

  • Can i copy the entire data flow from one std-Infocube to a new RT Infocube

    Hi,
    I created a new Real Time Infocube , copy of an existing Standard Infocube. But is there any option to copy the entire data flow - like transformations, DSO and all that ?

    Hi,
    We can copy standard Infocube to Realtime Infocube ,it will work in BI7.0.
    The procedure is  1) Go to Context menu of Standard IC and select copy option.
                                 2)In Edit IC option select Real Time and create it ,it copies as real time info cube.
                                 3)But for Loading data,Go to context menu of Real time IC and select option Change Real Time Load Behavior
                                     we get 2 options the first one is  1)Real time data target can be loaded with data,planning not allowed ,if we select data will be loaded.
                                 4)if we go for second option that is 2)Real time data target can be planned , data Loading not allowed ,if we select this,it  is  used for planning that is comparison of data.
                                5) This is difference between standard and Real Time InfoCube.
    Thanks,
    Supriya@n

  • How to restrict number of Data Records from Source system?

    Hi,
    How can I restrict the number of Data records from R3 source system that are being loaded into BI. For example I have 1000 source data records, but only wish to transfer the first 100. How can I achieve this? Is there some option in the DataSource definition or InfoPackage definition?
    Pls help,
    SD

    Hi SD,
    You can surely restrict the number of records, best and simplest way is, check which characteristics are present in selection screen of InfoPackage and check in R3, which characteristics if given a secection could fetch you the desired number of records. Use it as selection in InfoPackage.
    Regards,
    Pankaj

  • How to restrict no. of data packets from source system into BW

    Hi,
    when i try loading data from the IDES system to the PSA in BI 7.0. I get the following error from Data packet 41 onwards...
    Data Package 41 : arrived in BW ; Processing : Selected number does not agree with transferred n
    I have already read the various suggestions on the forum. Since I am loading data for testing purpose, i would like to restrict the data load until the 40th data packet. Is this possible & how?
    Pls help. Thanks
    SD

    Hi,
    I don't think there's a parameter you can set for the number of data packages.
    There's a parameter for the size of the datapackage. But that's different.
    Of course you can always try and restrict the data you load with the selection of your infopackage.
    Thats a more sensible way of doing it rather than restricting the number of data packages.
    Because even somehow if you managed to get them to 40, you won't know what data you will be missing that the datapackages from 41 onwards would have brought.  And this will lead to reconcilliation issues with R/3 data in your testing.
    -RMP

  • How to get the CSV,DATA output from RTF template

    Hi Jorge
    Thanks for your help.
    as in the link you have given RTF template can have the output type CSV,DATA but in the preview i can see only html,powerpoint,pdf,html excel .
    How to see the output in SCV,DATA format using my RTF template do i need to do specific design for those outputs.
    Thnaks in Advance

    It is because it has been preconfigured with such outputs.
    To modify and add more output types simply go to:
    1. Edit your Report
    2. Click on "View a List" (upper right hand corner)
    3. Click on the "output formats" (corresponding to your layout) and
    4. Check (add) the additional output formats you want your report to have.
    cheers
    Jorge

  • How to reflect the Master data changes from ECC to MDM

    Hi Experts,
    We need to reflect the master data changes of company code and cost center groups  from ECC to MDM.
    what methods available and which would be best in performance.
    kindly let me know if you need further information for better undrstanding.
    Thanks in anticipation
    looking forward to hear from you all,
    with regards,
    Chandhan.S

    Hi,
    You need to use change pointer to do this. Go to transaction SALE,
    expand MODELLING AND IMPLEMENTING...
    expand MASTER DATA DIST...
    expand REPLICATION OF MODIFIED DATA
    You may need to maintain distribution model in SALE.
    Cheers.
    Reward if useful

  • How to get the last data point from a TDM file in LabVIEW?

    Hello,
    I am using LabVIEW to analyze some rather large TDM files, and I need a way to get only the last data point.  So far, the only way I have been able to accomplish this is by reading the entire file.  Is there a property in the TDM file or a function in LabVIEW that will allow me to get the index of the last item in a channel?  
    Thanks!
    Christina

    Do you want to avoid reading whole file and want to be able to reach or get the index of last value of channel? is there any specific reason? I am not sure you could do it without loading the whole file. But the easiest way would be just to use array functions "array size" would give you the index of last element. 
    -Nilesh
    Kudos are (always) welcome for the good post. :-)

  • How to restrict the Master data in HR reports .???

    Dear SAP-ABAP Experts .
    I am facing a problem regarding HR reports which is appearing from HR Master Data .
    we want to restrict that a employee whose payroll area is AB (say) can only able to access the out of reoprt for payroll area AB only He/She not allowed to access the data for anyother payroll area .
    What help is required from Basis side , regarding Role / Profile etc .?
    How do we restrict this thing .
    PLease help me out .
    Kind regards : rajneesh

    Hi ,
    i think u are using LDB's in ur Reports , so LDB will take care of Authorizations.
    Regards
    prabhu

  • How to restrict the Master data access for HR reports .???

    Dear SAP-HR Experts .
    I am facing a problem regarding HR reports which is appearing from HR Master Data .
    we want to restrict that a employee whose payroll area is AB (say) can only able to access the out of reoprt for payroll area AB only He/She not allowed to access the data for anyother payroll area .
    What help is required from Basis side , regarding Role / Profile etc .?
    How do we restrict this thing .
    PLease help me out .
    Kind regards : rajneesh
    Edited by: rajneesh mittal on Jul 31, 2008 1:14 PM

    Hi rajneesh,
    In the IT0001 there is a field called organizational key.
    If you're not using it for any other purpose, make it filled with "payroll area" value through customization.
    Then through PFCG -> Change authorizations, you can limit the access authorizations of roles based on payroll area (using P_ORGIN Authorization object).
    If you have further questions pls feel free to ask.
    Regards,
    Dilek

  • How to restrict the ordering of apps from within an app

    My grandkids somehow run up charges by ordering apps from within an app they are using usually games  without even knowing they are doing it. How do I restrict them from doing it?  And how do I get the charges to Itunes removed when this happens?

    You can go into settings, and restrictions and turn off 'in app purchases'
    You may also want to set your apple id from 'require after 15 minutes' to 'require immediately'
    As to getting the charges reversed you can contact the app developer. Maybe they will reverse the charges, but they don't have to. The terms of sale are that all sales are final.

  • How to extract the a date field from a text value?

    Hi,
                                      SAMLE TEXT       Date: 06-FEB-14 02:47:07
    I have sample column in flat file like mentioned above, i need to capture only the date from this column. Can anyone please help me on how to extract this date from the column?

    Dear Mohammed Shariff,
    My suggestion is check it in google you can find no.of formulas related to excel.
    Ur's
    Mohan

  • How to restrict the Material (MRP relevant )from manual creation of Pur Req

    Hi,
    If we have a material "ABC"  which has MRP type as "PD" (MRP relevant) in Material Master.
    If we don't want to give user the option of creating manual Purchase requisition for Materail "ABC", Whether this is possible in Std SAP ? If yes, then How?
    Thanks in advance,
    Pravin

    Hi,
    In standard there is no option to restrict at material level.
    But using BADI ME_PROCESS_REQ_CUST method PROCESS_ITEM you
    meet your requirement easily.
    Regards,
    Sunitha.

Maybe you are looking for

  • BPM 11g Role Assignment not Reflected on BPM Workspace

    Hi, I'm having trouble with role maping in JDeveloper for my BPM 11g project, where the server groups mapped against a particular applcation role is not reflected in BPM workspace. I'm mapping application roles with server groups in the Organization

  • Creating a Webservice from a WSDL File

    Hello, I am trying to create a web service from a wsdl supplied by a business partner. The business partner will not have their web service up and running for a few months, but we want to be able to unit test our work. We have the wsdl file from the

  • Adobe acrobat professional - cropping

    the cropping tool is not starting at the centre point indicated. Is there a way of fixing this or calibrating this. (It appears all other functions with the cursor are fine)

  • How to add group managers who will be able to add members?

    I go to beehiveonline.oracle.com, select "Create group or add members", click through to page with Group Name, Add new members, View members, etc. I click on name of group to arrive to "Group Edit" page, where I add group manager emails. I enter new

  • Extension of generated Idocs types

    hello, does anybody knows why I can not create extension of generated (means in table EDBAS-GENERATED = 'X') idocs? I tried to extend idoc BATMAS03 on R/3 Ecc 6 and got message: message e099(b1) with          'Action is not possible for generated ido