How to restrict the department to not user other departments' equipment?

Dear SAPIENTS,
How to restrict the department to not user other departments' equipment? If suppose any one creating order for equipment having different authorization group then system should not allow me to do this.
Regards,
Kaushal Rai

Kaushal Rai,
Use Authorization group for technical objects, create authorization gruops in IMG and assign the same to the Equipment master and block the other department with the same authorization group. For ristricting the authorization group to other departments after creating and assigning it to the equipment seek help from your BASIS team.
goto the below path for cerating the Authorization group:
IMG - PMCS - Master data in PMCS - Technical Objects - Define Authorization groups:
Here you define the authorization groups, after completion of this step go to the Equipment master in General Data tab page there is a feild Authourization Group, mention the respective authorization group and provide this Authorization gruop value to the respective user in the user role with the help of BASIS Team.
Regards,
Praveen.

Similar Messages

How to restrict the delivery quantity not more than target quantity?

Dear Gurus,
How to restrict the delivery quantity not more than target quantity in a scheduling agreement? I think there are 2 methods.
1. I found that setting 0 in Overdelivery Tolerance Limit in Info Record is not effective. Why?
2. I want to set E for the message but can't find the place. The message is generated when entering and saving quantity as delivery quantity that is larger than target quantity. How can I set E to a message (067, as I remember)
Any other effective method? Please advice. Thanks.
Regards,
David

Dear all,
It is not OK after checking everywhere you mentioned. I tested in 2 clients. In the development enviroment client, it works whatever E or W. In test enviroment, it does not work (meassge is W).
I think there must be somewhere besides of those you menetioned.
I notes that SAP help for the overdelivery tollerance setting of scheduling agreement:
Overdelivery Tolerance Limit
Percentage (based on the order quantity) up to which an overdelivery of this item will be accepted.
Dependencies
If you have set the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed), this takes priority. It makes no sense to define a tolerance limit for overdelivery in such case.
Where can I see: 'the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed)'? I want to check it.
Pls help! Thanks.
Regards,
David

In Free goods how to restrict the quantity to not to alter.

Dear All,
I have maintain condition record for free goods in VBN1.EX.102.While creating sales order for 20 quantities system populates 204.But if am changing this as 152 or 205,system is allowing to do.Same is the case at delivery.How can we restrict the system to not to allow the changes in sales order in case of free goods .Please guide me.
Regards,
Deepti

Hi
KIndly check the below user exit and make the free goods item as in display mode
MV45AFZZ 'USEREXIT_FIELD_MODIFICATION'
to change the SCREEN-INPUT = 0 to make it display for free goods item category Tann
By doing above if any one changes main item system will accordingly change the free goods item also
Regards
Damu.

How to restrict the PR Qty not exceed in the PO.

Hello experts,
Need a small help from you.
I have a PR manually created thro ME51N say qty of 100 Units.When i make PO for that PR of 100 unit,i give more than 100 units in PO.but still system is not throwing an error.my requirement is want to restrict the PR qty in PO,like it should not exceeds the PR qty in the PO.
How to configure this if PR qty exceeds in the PO system should throw an error.
Ur reply would b highly appreciable

Hi Vijay
Go To SPRO--MMPurchasing-Environement Data---Define Attributes of system messages.
There try to put E against message no. 076.
Regards
Yogesh

OIM 11g-How to restrict the role administrator from seeing "other" roles

Dear All,
How to restrict Administrator from seeing roles he is not suppose to administer?
My administrator is suppose to assign only Role A. When he logs in He can see every single role. How to correct it so that he can see only Role A?
Thank you for your time
Maria

Modify "All User Role Management Policy"

How to restrict the user in MIRO for not modifying price

Hi All
My requirement is How to restrict the users in MIRO screen for not modifying Material Prices of only the for specific ROH types .
For example :
Valuation class             RM description
3021                             RM - A
3022                             RM - B
3024                             RM - C
when ever we procure the above Raw materials A,B and C and
the Quantity of each Raw material @ 10 units and value @ 1 INR for each unit
RM - A procured qty 10 @1 total price is INR 10
RM - B procured qty 10 @1 total price is INR 10
RM - C procured qty 10 @1 total price is INR 10
total price of PO is INR 30
when we received invoice material prices are assume it INR 1 is excess for each material.Now the invoice price for each RM has become INR 11.
in MIRO we want restrict the user to change the price from INR 10 to 11.
suggest the best possible ways to restrict in MIRO screen
Thanks & Regards
Mala

Dear:
                  Take help of ABABPER fo implement exit using INVOICE_UPDATE or MRMH0003 Logistics Invoice Verification: Revaluation/RAP exit. If this does not help then seek help of MM functional who will help you to find exit for the required task.
rEGARDS

How to restrict the GR for Production Order when Goods Issue is not done

Hi Gurus
How to restrict the GR for Production Order when all the required components for production order are not issued with all required quantity. Even for partial issue system should not allow GR with 101. The user status with RMWA, RMWF & CGFB is not working.
Pls suggest best solution.
Abhijit.

Hi,
You can club together the GI nad GR at the time of confirmation..
I.e Backflush for the components and auto GR for the Product.
So that you can stream line the Process.
The best Option would be to use the User Exit:
Enhancement - MBCF0002
Functional Module - EXIT_SAPMM07M_001
Include - ZXMBCU02
Refer below link for further details..
How to stop the goods receipt before issueing the goods for production orde
Regards,
Siva

How to restrict the last record and not moving to next reocrd

1) how to restrict the last record and not moving to next reocrd.
2) Also for the F6 key(for new record).

When you are on the last record, next-record will create a new one, so that my question is do you want to forbid new record creation.
Francois

How to restrict the user from making any changes in Sales order- item level

Hi to all
How to restrict the users from making any changes in sales order at item level if the same sales order is released by senior user through status profile.
Regards
Anish Parikh
Edited by: anish parikh on Jan 24, 2008 5:16 AM

Hi Anish,
This can be achieved through the roles and authorization.
This can be done through the basis team. they can create user profiles and roles.
For the roles they assign some transaction codes so that they can view the only assigned tr. codes.
Like that ur requirement can be done.
Also u can prevent the user to change any fields in the sales order screen (VA02). for that please modify the authorisations.
Hope i answers.
Reward points if useful.
Edited by: kaleeswaran bhoopathy on Jan 24, 2008 9:57 AM

How to restrict the user to enter only numeric values in a input field

How to restrict the user to enter only numeric values in a input field.
For example,
i have an input field in that i would like to enter
only numeric values. no special characters,alphabets .
reply ASAP

Hi Venuthurupalli,
As valery has said once you select the value to be of type integer,once you perform an action it will be validated and error message that non numeric characters are there will be shown. If you want to set additional constraints like max value, min value etc you can use simple types for it.
On the project structure on left hand side under local dictionary ->datatypes->simple types create a simple type of type integer
The attribute which you are binding to value property ;make its type as simple type which you made
Hope this helps you
Regards
Rohit

How to restrict the changes in Relesed PO?.

Hi all,
How to restrict the users to make a changes in the Released PO?. User should make the changes only if it is unreleased by the respective codes.
1. Is there any user parameters like functional authorisation?
2. I have already suggested two solutions to the clients that
1. To restrict the authorisation of TCodes ME22n at the user level, but it's not a suitable solution, if user want to make any changes before releasing, then system is not allow to do the changes.
2. I have made release indicator as a 1 - not changeable if it is released, in release strategy settings. But the system is not allowing the all the users including release codes to make the changes?.
If there is any solution, please reply immediately.
with regards,
Raja.

hi,
if u set release indicator 1, after release is taken place, for any changes, u need to revoke the release. and then change the PO.
even u cant directly block the changes to already released PO, because, in future if at all qty or some changes is required to change, it should allow u to change!

How to restrict the duplicate values in lov column of VO based Adv Table

Hi Gurus,
I want to restrict the duplicate values at lov which is a colunm in an Adv Table.
If user enters duplicate values then first it should show an error msg that Duplicate values have been entered.
After the duplicate values have been removed, then the user can save all the values in the table.
My Adv Table is based on a VO.
The link how to restrict the duplicate values at form level
talks about Adv Table based on a EoVO, which doesnot work in my case.
My Approach,
I am iterating through RowSetIterator and committing through PROCEDURE.
I am able to avoid duplicate entry through a function checkRespId. (given below)
Below code is for iterating and committing.
public void saveline(String reqid,String userid)
System.out.println("RequestId/saveline"+reqid);
System.out.println("UserId/saveline"+userid);
OAViewObject vo = (OAViewObject)getRespLineVO1();
RespLineVORowImpl row = null;
int fetchedRowCount = vo.getFetchedRowCount();
RowSetIterator deleteIter = vo.createRowSetIterator("deleteIter");
if (fetchedRowCount > 0)
deleteIter.setRangeStart(0);
deleteIter.setRangeSize(fetchedRowCount);
for (int i = 0; i < fetchedRowCount; i++)
System.out.println("Inside the for LOOP");
row = (RespLineVORowImpl)deleteIter.getRowAtRangeIndex(i);
String respoidid = row.getAttribute("ResponsibilityId")+"";
String respname = row.getAttribute("ResponsibilityName")+"";
String stdate = row.getAttribute("StartDate")+"";
String enddate = row.getAttribute("EndDate")+"";
String linestatus ="A";
if(userid!=null)
if(!(respoidid.equals("null")) && respoidid!=null)
String checkingrespid=null;
checkingrespid = checkRespId(userid,respoidid);+contains no if not duplicate and yes if its duplicate+
System.out.println("checkingrespid for Resp with ID :"+respoidid+"exists or not "+checkingrespid);
if(checkingrespid.equals("No"))
String message, result = null;
Connection txn = getOADBTransaction().getJdbcConnection();
try
calling PROC ...
catch(Exception e)
message = "Error in Inserting into line" + e;
throw new OAException(message, OAException.ERROR);
else
throw new OAException("You have entered duplicate no. of values", OAException.ERROR);
else
System.out.println("respoidid is null");
break;
deleteIter.closeRowSetIterator();
public String checkRespId(String userid,String respoidid)
String createRow="No";
OAViewObject vo = (OAViewObject)findViewObject("CheckRespVO1");
if (vo != null)
vo.setWhereClauseParams(null);
vo.setWhereClauseParam(0, userid);
vo.setWhereClauseParam(1, respoidid);
vo.executeQuery();
System.out.println("ROW COUNT IS "+vo.getRowCount());
if(vo.getRowCount()>0)
createRow="Yes";
else
createRow="No";
return createRow;
Problem:
I remove the duplicate entries and click on save and get this error.
Unable to perform transaction on the record. \nCause: The record contains stale data. The record has been modified by another user.
\nAction: Cancel the transaction and re-query the record to get the new data.
Thanks,
Sombit

Hi Anil,
I am trying out your code but stuck in inserting the rows
using your code in URL: http://oracleanil.blogspot.com/2010/09/oaf-passing-table-type-object-to-oracle.html
I am always getting the same exception i.e COde blast in when I run.
My modified code is:
String[] as = null;
Number[] vNumber = null;
Number[] vNumberrespid = null;
Number reqidnumber = null;
reqidnumber = new Number(Integer.parseInt(reqid));
Connection txn = getOADBTransaction().getJdbcConnection();
String mCreateSearchRequestStatement = null;
OAViewObject vo = (OAViewObject)findViewObject("RespLineVO1");
int j = vo.getFetchedRowCount();
try
System.out.println("abouce try");
vo.reset();
if (vo.getFetchedRowCount() > 0)
System.out.println(String.valueOf("Fetched row count ").concat(String.valueOf(vo.getFetchedRowCount())));
int i = 0;
as = new String[j];
vNumber = new Number[j];
vNumberrespid = new Number[j];
while (vo.hasNext())
vo.next();
System.out.println(String.valueOf("Inisde the do while loop").concat(String.valueOf(i)));
vNumber[i] = (reqidnumber);
vNumberrespid = ((Number)vo.getCurrentRow().getAttribute("ResponsibilityId"));
as[i] = String.valueOf(vo.getCurrentRow().getAttribute("ResponsibilityName")).concat(String.valueOf(""));
System.out.println("Request ID "+reqidnumber[i]);//getting null even there is some value selected
System.out.println("ResponsibilityId "+vNumberrespid[i]);//getting null even there is some value selected
System.out.println("Resp Name "+as[i] );//getting null even there is some value selected
i++;
CallableStatement cs = txn.prepareCall("{call XX_PassTableType.XX_PassTableType_prc(:1, :2,:3)}");
ARRAY array = new ARRAY(new ArrayDescriptor("APPS.JTF_NUMBER_TABLE", txn), txn, vNumber);
ARRAY arraynew = new ARRAY(new ArrayDescriptor("APPS.JTF_NUMBER_TABLE", txn), txn, vNumberrespid);
ARRAY array1 = new ARRAY(new ArrayDescriptor("APPS.JTF_VARCHAR2_TABLE_100", txn), txn, as);
cs.setArray(1, array);
cs.setArray(2, arraynew);
cs.setArray(3, array1);
cs.registerOutParameter(3, 2003, "JTF_VARCHAR2_TABLE_100");
cs.execute();
ARRAY error = null;
error = (ARRAY)cs.getArray(2);
if ((error != null) && (error.length() > 0))
System.out.println(String.valueOf("Error is ").concat(String.valueOf(error.getArray())));
String[] retError = new String[j];
retError = (String[])error.getArray();
System.out.println(String.valueOf("Error in saving data").concat(String.valueOf(retError[0])));
cs.close();
catch (Exception exception)
throw new OAException("code blast", OAException.ERROR);
Thanks,
Sombit

How to restrict the change access in CRM for OLTP orders

Hi Guru's,
Please let me know how to restrict the change access in CRM for the orders that are created in ECC. The ECC orders will only for display in CRM but not for change,
We have the orders that are created in ECC, it will flows to CRM and should restrict the access to get in to the change mode in CRM but as of now CRM system is allowing change mode for ECC orders and ending up with errors.
Is there any additional middleware parameter that needs to be added to SMOFPARSFA table to get this functionality! Please advice! Thank your for your help.
Regards
Suneel

Hi.
You can use the PFCG role to control if the user is able to create, change, delete or only display a business transaction type.
Regards.

How to restrict the quantity & rate of MIRO with MIGO and PO

Hi friends,
Can any body tell me how to restrict the quantity & rate of MIRO with MIGO and PO.
e.g. if we have done MIGO for quantity 10 and the rate maintained in the PO is Rs.100.Then at the time of MIRO system should not allow to change the quantity and rate.
How we can do this?
Regards
Purnesh Sharma

Hi,
You are misunderstanding the use of MIRO.
If you change the details in MIRO you are NOT changing anything. You are just entering the price and quantity from the Invoice.
If this price and or qty is different from the GR aqty and PO price then the system will block the invoice for payment (and it can issue messages toinform the buyer if configured correctly).
The whole design of MIRO is based on the principle that you enter EXACTLY what the vendor has put on the invoice. By preventing the users from changing anything you will get NO mismatched invoices, but you will not be paying the vendor the amount specified on their invoice. This will surely cause problems.
If you do want to ensure that ONLY the GR qty and the PO price are used and cannot be changed then why not consider using ERS (Eveluated Receipt Settlement. this is basically self billing.
Effectively you will be paying the vendor based on what you have received in MIGO multiplied by the price from the PO. (which is what you would be doing if you stop any changes in MIRO)
Steve B

How to restrict the upload file size in me21n/me22n/me23n?

Hi Guru's,
I have a requirement to restrict the user from attaching a local file more than 20MB in Purchase Order.
In standard SAP system, the user can attach a file of any size in PO. How to restrict the size of the file?
I have no clue how to achieve this? Any kind of help would be great...
Thanks in Advance...
Regards,
Satyam

Hi Guru's,
The file size is now restricted in function GUI_UPLOAD. But this function module is used at many places. I want to restrict it only for Tcode: ME22n and ME23n.
I thought of restricting it by sy-tcode field but sy-tcode value is not passed to this function module in the run time.
Could anyone help me on this how to restrict it for the above mentioned tcodes??
Regards,
Satyam

How to restrict the department to not user other departments' equipment?

Similar Messages

Maybe you are looking for