How to restrict the GR for Production Order when Goods Issue is not done
Hi Gurus
How to restrict the GR for Production Order when all the required components for production order are not issued with all required quantity. Even for partial issue system should not allow GR with 101. The user status with RMWA, RMWF & CGFB is not working.
Pls suggest best solution.
Abhijit.
Hi,
You can club together the GI nad GR at the time of confirmation..
I.e Backflush for the components and auto GR for the Product.
So that you can stream line the Process.
The best Option would be to use the User Exit:
Enhancement - MBCF0002
Functional Module - EXIT_SAPMM07M_001
Include - ZXMBCU02
Refer below link for further details..
How to stop the goods receipt before issueing the goods for production orde
Regards,
Siva
Similar Messages
-
Can we restrict the partially confirmed production order from getting delet
Dear all,
Can we restrict the partially confirmed production order from getting deleted?
I.e. if the production order is having status PCNF then the deletion flag indicator (status DLFL) should not be allowed to set
SmanS
Edited by: SAP PP Consultant on Feb 4, 2009 6:12 AMHi,
Then must be there is change in BS22.Check allowed transaction setting for Status PCNF/CNF .For reference purpose compare it with other client IDES or sand box.
For your reference I have pasted Error log on the same.
Balance of ORD 1000000702 is not zero
Message no. KO115
Diagnosis
The balance on object ORD 1000000702 is not zero. That is, there are still costs on the object.
System Response
The object cannot be closed and the deletion flag must not be set.
regards,
Dhaval -
How to find system status for production orders?
How to find system status for production orders?
looked into table AUFK, AFKO and AFVC but none of these tables, carry
system status as part of the fields(STTXT)
I tried to filter in COOIS, but not much help
Able to find system status information in COHV,Is there any other way where
I can find system status information for production orders
Kindly guideHi,
Look into table, JEST, JSTO, AFPO & AFKO. CAUFV filed OBJNR, TJ02T filed ISTAT.
But, it is very difficult to combine the details like Order and System status.
Take the help of your ABAPer to generate Report for you.
Regards,
Siva -
Revision: 10545
Author: [email protected]
Date: 2009-09-23 13:33:21 -0700 (Wed, 23 Sep 2009)
Log Message:
Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts
QE Notes: 2 Mustella tests fail:
components/DataGrid/DataGrid_HaloSkin/Properties/datagrid_properties_columns_halo datagrid_properties_columns_increase0to1_halo
components/DataGrid/DataGrid_SparkSkin/Properties/datagrid_properties_columns datagrid_properties_columns_increase0to1
These fixes get us to measure the embedded fonts correctly when going from 0 columns to a set of columns so rowHeight will be different (and better) in those scenarios
Doc Notes: None
Bugs: SDK-15241
Reviewer: Darrell
API Change: No
Is noteworthy for integration: No
tests: checkintests mustella/browser/DataGrid
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-15241
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/DataGrid.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridBase .as
flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridColu mn.asHi Matthias,
Sorry, if this reply seems like a products plug (which it is), but this is really how we solve this software engineering challenge at JKI...
At JKI, we create VI Packages (which are basically installers for LabVIEW instrument drivers and toolkits) of our reusable code (using the package building capabilities of VIPM Professional). We keep a VI Package Configuration file (that includes a copy of the actual packages) in each of our project folders (and check it into source code control just as we do for all our project files). We also use VIPM Enterprise to distribute new VI Packages over the network.
Also, as others have mentioned, we use the JKI TortoiseSVN Tool to make it easy to use TortoiseSVN directly from LabVIEW.
Please feel free to contact JKI if you have any specific questions about these products.
Thanks,
-Jim -
How to display the details of particular order when click on button in sapui5
Hi Experts,
How to display the details of particular order when click on button in sapui5?
I Have a requirement that is i want display all the list of orders coming from backend as shown in image below
then in that i have a button when i press the button it need to display the details of particular order as shown in image below
Please help me .
Thanks & Regards
chittiDoes anyone know how to display the index of current desktop?
Brute force - - I have written the number of the Desktop directly onto the wallpaper picture I am using for each Desktop (easy to do with Preview).
All Desktops are using different wallpaper photos, so they are easily recognized by the color scheme, and in the upper left corner is the number.
Regards
Léonie -
How to restrict the Number of sales orders in theTCode:VL10A whil creation
I'm creating the Delivery by using the batch job with program: RVV50R10C Here I need to restrict the number of sales orders numbers while creating deliveries for sales orders
Like system should pick the sales orders (sales documents) from 1 to 100 OR 100 to 200
Please advise me how to do it and what changes I need to do itHi,
Aslo, you can see Note 198137 - VL10: Customer-specific enhancements / user exits. As is for SO, check subroutine LV50R_VIEWG03. If cf_subrc = 1 thin this SO isn't seen in list.
***INCLUDE LV50R_VIEWG03 .
*& Form POSTAB_VEPVG_FILL_USER
FORM POSTAB_VEPVG_FILL_USER
USING IX_LIST_PROFIL TYPE SHP_VL10_LIST_PROFIL
IX_PARAMETERS TYPE SHP_VL10_PARAMETERS
IX_SELECT_OPTIONS TYPE SHP_VL10_SELECT_OPTIONS
IT_ENQUEUE TYPE SHP_VL10_PACKAGE_T
IX_SD_ORDER TYPE SHP_VL10_SD_ORDER
IS_VEPVG TYPE VEPVG
CHANGING CS_POSTAB TYPE SHP_VL10_ITEM
CF_SUBRC TYPE SYSUBRC.
CF_SUBRC = 0.
* cs_postab-zzfield = ...... "add new field to List
* if xxxxxxx = yyyyyyy.
* cf_subrc = 1. "Exclude this index from List
* endif.
ENDFORM. " POSTAB_VEPVG_FILL_USER
I hope this helps you
Regards
Eduardo -
How to compare the variances of production order type and get report
Hello All,
I want to compare the variances of production order type wise.
for ex. i want variances of order type PP 01 and PP 02 in a single report.Hi Sachin,
You have to maintain summarization hierarchies to achieve this.
1. Maintain summarization hierachies with hierarchy level - order type in the t.code.KKR0
2. Generate the hierarchy in KKRC
3. Run the report KKBC_HOE
Regards,
Mukthar -
How to restrict the user for re-submitting the same form
Hi All,
I would like to know, How to restrict a user for re-submitting the same page.
I have a jsp page with submit button... and should not allow the user to save the same data again ..
AnilTry the followings. If user disable cookies, this will not work. You need to modify to detect such situation!
String processed = "mycooke";
Cookie[] cookies = request.getCookies();
Cookie c = null;
if (cookies!=null) {
for (int i=0; i < cookies.length; i++) {
if (cookies.getName.equals(processed)) {
c = cookies[i];
break;
if (c!=null) {
// already processed.
// send error message and exit.
// set cookie;
c = new Cookie(processed , "yourdata");
c.setMaxAge(-1);
response.addCookie(c);
// process as it is the first; -
How to calculate missing parts for production orders?
Dear All,
I have this scenario i'm using collective orders\direct production method in my industry which means that sub assemblies don't enter any warehouses but transferdd directly to its superior order as a component , my problem is i want to know the missing raw material for the finished product , knowing that the FP has a 6 level BOM i want during ATP for production order the sustem checks only for the lowest level of material and takes only the CURRENT STOCK IN WAREHOUSES , what checking group should be used for the FP, Subassemblies and raw materials.
plz help
Ahmed SobhiHI,
If no Av. Check is to be done at all, then specify checking group as KP. But be informed, this will be impactive across all business processes meaning if you plan to sell the SFG & you place a SO for that item, an Av. Check will confirm it immediately as it has av. checking group as KP.
Now for the checking group maintained for raw mtl, go to OPJJ & check the details of the checking rule to know which receipts/ issues are considered & you may modify the same as per your need.
I would suggest do a test in your sandbox & if it meets your need, then adopt the same.
Regards,
Vivek -
Batch for production order when released
Hello Guru,
I have a question, we on created production order, when change (CO02) to be released (green flag) new batch will be created upon saving this change for the order Change Batch display will prompt, displaying the batch number for the FG material on the order, with its Production Date (set as the date of start of order) and the Shelf Life expiration (depend on the SLED date in master data for material) this to date was automatically proposed by SAP. We would like this two date of the batch of the production order to be blocked on all modification possible, is there any set-up way we can do in order to block those date for future modifcation by some user? please help and guide us to do this.
ThanksHello R>brahmankar,
AM interested on this An OPKP there is setting for create batch while releasing assign this profile to material master -
i already check OPKP for our plant, in the batch management portion BATCH CLASSIFICATION was set to 1 (classification was carried out in background-all batches) and the AUTOMATIC BATCH CREATION IN THE ORDER was set to 2 (auto batch creation at order release). EXTENDED CLASSIFICATION and ALWAYS BATCH SPLIT was not tick, please how can we do this in OPKP and assign for the material master profile? please guide.
Any help
Edited by: Ryan on Mar 12, 2009 6:35 AM -
The GP for Production order Rescheduling
Hi Folks
I have finished executing the Production order Rescheduling scenario in the DS.
Now I want to find out how the blocks, the actions and the callable objects of it has been arranged.
I am logged in as username j2ee_admin.
I cannot see folder for the Production order Rescheduling in
Guided Procedure -> Design time.
There are folders for the scenario of procurement, travel expense exception, store specific consumer prices and so on.
Can somebody help me know where can I locate it?
many thanks
sudeepHallo ,
Create the G/l account using transaction FS00 for the company code COM2.
Regards
Ramesh -
How to use smart form for production orders
Hello Experts,
I have a couple of questions about printing out production orders from SAP, from OPK8.
My ABAPer has developed a smart form and I am trying to use the same for the list LG01, i.e. the object list.
Since, there was no place to assign a smart form directly, so the ABAPer has copied the existing print program , defined for my ref. order type and LG01 and assigned the new smart form inside the program. This new program has now been assigned against my ref. ord type, LG01 and all the plants, as seen in screenshot below.
Now, what is happening is that when I give print for my order, a pop-up screen asks for the printer. I give LOCL , check 'print now' and then click on the print preview.
I can see the new form that has been developed and it is alright.
Then, when I click on the back arrow, once again the print pop-up screen appears. Now, when I enter LOCL, print now and click the print preview, then I see another form open up before me. I am assuming that this is some form which was pre-configured in the system, under the section 'Forms', for the same object list LG01.
Do I have to assign the new smart form under the section "Forms' also, for the ref order type and LG01? or the change in the section 'print programs' is enough for the new form to kick in? Please guide me. I tried to but it gave the error that the form is not created in English. Also , my form is a smart form, not a SAPScript or PDF form, so I wonder if that will help at all.
Requirement :- I need to suppress this second form somehow but do not know how to do it. I want that only one form, i.e. my smart form should be printed out when someone gives print from the order.
Let me know if something is not clear.
Regards
P.RHi P,
Go a few steps down and remove flags on the documents you don't want to print:
this are just suggestions, they can be changed in your production order, in CO02, menu Order->Settings->List Control.
regards,
Edgar -
How to restrict status profile for sales order.
Dear Friends,
Pl suggest me for follwoing scenario
► As per business process for tender/ institutional sales and exports, the order is complete once the complete delivery and invoicing for the same has been performed.
► It was also observed that a sales order may be modified (material, quantity, price etc) even after complete invoicing of the same has been performed in SAP.
The requirement is Possibility to enable a control to restrict any amendments to the sales order after complete delivery and invoicing will be explored as per business requirements.
Is there any solution above scenario without writing any code.
Regards,
Atul
Edited by: atul thakur on Oct 28, 2009 5:09 AMMr Atul,
My understanding is, you don't want your user to be able to change the pricing and order quantity once the order is complete, i.e Delivered and Shipped.
The status profile will not help you in the above scenario, Price/Quantity changes will not come up as Business transactions that can be controlled at Status profile.
Standard SAP restricts the price changes to a completed item of the order, so no need to worry about this.
But order quantity can be increased any time.
So to restrict the user to increase the order quantity you need to use the User-Exits that SAP provided.
Use the MV45AFZB user-exit program and form FORM userexit_check_vbap to code this.
Hope this helps you.
Regards,
Aj. -
How to write the code for a panel when using treeview?
Hi,
We are developing a new plug-in in Indesign as based on treeview. we have completed the design part, but we have some doubts in coding..
One dialog widget and three panels(General, fitting, Eventsandscripts).
The .fr file:
resource GeneralPanelWidget (kGeneralPanelResourceID)
__FILE__, __LINE__,
kGeneralPanelWidgetID, // WidgetId
kPMRsrcID_None, // RsrcId
kBindNone, // Frame binding
Frame(0,0,800,500) // Frame
kTrue, // Visible
kTrue, // Enabled
kGeneralPanelTitleKey, // Panel name
StaticTextWidget
kInvalidWidgetID, // WidgetId (default=0)
kSysStaticTextPMRsrcId, // RsrcId
kBindNone, // Frame binding
10, 15, 138, 35, // Frame: left, top, right, bottom.
kTrue, kTrue, // Visible, Enabled
kAlignLeft, kEllipsizeEnd,kTrue, // Alignment, ellipsize style
ksamPrefProjectPathStringKey, // Initial text.
ksamPrefProjectPathTextEditBoxWidgetID // No associated widget
// TextEditBox Widget resource
TextEditBoxWidget
ksamPrefProjectPathTextEditBoxWidgetID, // WidgetId
kSysEditBoxPMRsrcId, // RsrcId
kBindNone, // Frame binding
Frame(140, 15, 420, 35), // Frame (l,t,r,b)
kTrue, kTrue // Visible, Enabled
0, // Widget id of nudge button (0 so we dont get one)
0, 0,// small,large nudge amount
0, // max num chars(0 = no limit)
kFalse,// is read only
kFalse,// should notify each key stroke
kFalse,// range checking enabled
kFalse,// blank entry allowed
0, // Upper bounds
0, // Lower bounds
"", // Initial text
ButtonWidget
ksamChooseProjectButtonWidgetID,
kSysButtonPMRsrcId,
kBindNone,
430, 15, 500, 35,
kTrue, kTrue,
ksamChooseBtnStringKey,
StaticTextWidget
0, // WidgetId (default=0)
kSysStaticTextPMRsrcId, // RsrcId
kBindNone, // Frame binding
10, 45, 138, 65, // Frame: left, top, right, bottom.
kTrue, kTrue, // Visible, Enabled
kAlignLeft, kEllipsizeEnd,kTrue, // Alignment, ellipsize style
ksamPrefImagePathStringKey, // Initial text.
ksamPrefImagePathTextEditBoxWidgetID // No associated widget
// TextEditBox Widget resource
TextEditBoxWidget
ksamPrefImagePathTextEditBoxWidgetID, // WidgetId
kSysEditBoxPMRsrcId, // RsrcId
kBindNone, // Frame binding
Frame(140, 45, 420, 65), // Frame (l,t,r,b)
kTrue, kTrue // Visible, Enabled
0, // Widget id of nudge button (0 so we dont get one)
0, 0,// small,large nudge amount
0, // max num chars(0 = no limit)
kFalse,// is read only
kFalse,// should notify each key stroke
kFalse,// range checking enabled
kFalse,// blank entry allowed
0, // Upper bounds
0, // Lower bounds
"", // Initial text
ButtonWidget
ksamChooseImgpathButtonWidgetID,
kSysButtonPMRsrcId,
kBindNone,
430, 45, 500, 65,
kTrue, kTrue,
ksamChooseBtnStringKey,
StaticTextWidget
0, // WidgetId (default=0)
kSysStaticTextPMRsrcId, // RsrcId
kBindNone, // Frame binding
10, 75, 138, 95, // Frame: left, top, right, bottom.
kTrue, kTrue, // Visible, Enabled
kAlignLeft, kEllipsizeEnd,kTrue, // Alignment, ellipsize style
ksamPrefMasterTempPathStringKey, // Initial text.
ksamPrefMasterTemplatePathTextEditBoxWidgetID // No associated widget
// TextEditBox Widget resource
TextEditBoxWidget
ksamPrefMasterTemplatePathTextEditBoxWidgetID, // WidgetId
kSysEditBoxPMRsrcId, // RsrcId
kBindNone, // Frame 85
Frame(140, 75, 420, 95), // Frame (l,t,r,b)
kTrue, kTrue // Visible, Enabled
0, // Widget id of nudge button (0 so we dont get one)
0, 0,// small,large nudge amount
0, // max num chars(0 = no limit)
kFalse,// is read only
kFalse,// should notify each key stroke
kFalse,// range checking enabled
kFalse,// blank entry allowed
0, // Upper bounds
0, // Lower bounds
"", // Initial text
ButtonWidget
ksamChooseMasterTempButtonWidgetID,
kSysButtonPMRsrcId,
kBindNone,
430, 75, 500, 95,
kTrue, kTrue,
ksamChooseBtnStringKey,
CheckBoxWidget
ksamShowFrameLabelCheckBoxWidgetID, // WidgetId
kSysCheckBoxPMRsrcId, // RsrcId
kBindNone,
Frame( 10, 165, 320, 185) // left, top, right, bottom
kTrue, // Visible
kTrue, // Enabled
kAlignLeft, // Alignment
ksamShowFrameLabelChkBoxTextKey // Initial text
DefaultButtonWidget
kOKButtonWidgetID, // WidgetID
kSysButtonPMRsrcId, // RsrcID
kBindNone, // Binding
320, 380, 390, 400, // Frame (l,t,r,b)
kTrue, kTrue, // Visible, Enabled
ksamPrefSaveStringKey, // Button text
CancelButtonWidget
kCancelButton_WidgetID, // WidgetID
kSysButtonPMRsrcId, // RsrcID
kBindNone, // Binding
400, 380, 470, 400, // Frame (l,t,r,b)
kTrue, kTrue, // Visible, Enabled
ksamPrefCancelStringKey, // Button name
kTrue, // Change to Reset on option-click.
This is for General panel design and we have written the code for this..but we dont know where to call this functions. we implemented this plug-in based on BasicSelectableDialog sample plug-in. please guide me to complete this code.
Thanks in Advance..Your question is not very clear. Have you gone through the PanelTreeView.sdk example in the sdk?
-
Reservation reduction on production order without goods issue
At our plants we have a kanban approach where component materials are
issued to any available production order as an unplanned GI instead of
to a specific production order as a planned GI. This causes component
demand to be overstated because the reservation is not reduced. This
is resulting in overstated demand in MRP.
Due to inventory problems and inconsistent actual component
consumption, backflushing is also not an option.
How could we reduce the reservation quantities on the components based
on the quantity remaining in the production order? I believe we would
want to trigger this from a production order confirmation (CO15).
I found that if we can update the field ENMNG(Quantity withdrawn) in table RESB,
the reservations get reduced.But I don't wabt to do direct update of table RESB in the user exit in transaction CO15.
Any help with this isseu is appreciated.
Thanks,
Ashok.In customizing materials management -
> Inventory Management and Physical Inventory->Goods Issue / Transfer Postings make--> Set Up Dynamic Availability Check
For 261 movement type set Dynamic Availability Check as "F"
and then in omcq transaction M7 362 message set "E"
This customizings prevent good ıssue more than reservation quantity
Maybe you are looking for
-
IPhone 5 not getting all texts from Galaxy S6
My girlfriend is having a problem not getting all of my texts. As far as we know, it is only happening to texts from my phone. They are showing as sent on the Galaxy S6, but do not show up, ever, on her iPhone 5. The missing messages are random.
-
Media Encoder for CS4 (Mac Version) will not encode
Hi- I am editing on a new macbook pro and Premiere works great....but the media encoder keeps giving me error messages stating the source media can't be found. I have tried to update the software, but the update will not complete (update work for the
-
Access Windows Registry for Silent PDF Printing
Hi All, I am trying to print a form (created in Livecycle Designer ES2) silently to PDF upon the click of (javascript) button on the form. I have Win XP and Acrobat 9 Pro. I feel close to achieving the goal however after some time and effort I am not
-
Purpose of Routine in transfer rules in BW
Hello BI Gurus, Please tell me the purpose of "Routine" selection in the transfer rules. with regards, vasu
-
I have a file that keeps returning to my trashcan! Kind: Alias Size: 0 KB Date: Dec. 31, 1903 Name: nulnulnulnul.1/2, Can someone please help me make it go away? Thanks!