How to restrict the manual accrual posting in Rebate?
Hi friends,
I am working with Retroactive Rebate.
As on now, the total accrual posted to FI is 20000 INR.
If I am taking the past Billing documents into consideration then the Total accrual is 35000 INR.
So, I need to post a Manual Accrual for the difference of 15000 INR. It is running fine.
Now, I want that user should be able to post more than the difference amount. During Manual accrual posting, one can post any amount he wants which I want to restrict upto the difference amount.
That means, system should not allow the user to enter more than the difference amount.
Can any body please guide me how to do it?
Regards
Pradyumna
Hello Pradyumna,
there is not standard way to restrict the manual accrual value.
Are you using the old rebate processing (with S136 not active) ?
If so I would advice you to pass to new rebate processing. See the note 105681.
In this way the retroactive rebates can be easily handled.
If you prefer to old rebate processing, please try to test the report RV15B005 to post accrual for old invoices
Best regards,
Ivano.
Similar Messages
-
Hi All,
How to use the manually entered Hours/Days in the Duration field for BG_ABSENCE_DURATION fast formula?
Requirement is to restrict employees for applying for leave more than the accrued balance. In SSHR, apply leave functionality, the employee enters the start date, end date and duration manually. The entered duration must be used in the fast formula to check against available balance.
In the BG_ABSENCE_DURATION FF, I have a function to calculate the net accrual balance as on the calculation date.
I want to add the logic as - If to_number(Duration) /*[manually entered value]*/ > net accrual balance then
Duration = 'FAILED'
invalid_msg = 'Error'
return duration, invalid_msg
Thanks!Hi,
We have a standard functionality to override the duration calculation and you don't need to add a validation for the same. Please set the value of profile option HR: Absence Duration Auto Overwrite to Yes
When you do this user will not have to enter the duration value manually. It will get auto calculated based on the duration calculation in BG_ABSENCE_DURATION when you click on the next button.
For not allowing negative leaves to be applied, If you are on R12 then, this is a standard functionality and you need to set profile option HR Allow Absence Negative Balance to No
If you are on 11i then refer Note: 268171.1: How Do You Stop Accrual Plans from Going Negative?
Try and let me know in case you need further help.
Thanks,
Sanjay -
How to restrict the number of login attempts?
Hi,
Is there any "out of the box" solution to restrict the number of login attempts
in personalization server?
Thankswhy is it obvious he wants to restrict instances
of program, rather than instances in
it? it's not obvious, but it's what I think he meant
he asked "how to restrict the number of instances in
a program". it has the words "instances" and
"program" in it, but not the word "class". on face
value, yes, he's asking about instances within one
JVM. knowing a bit about how newbs minds work, I'm
reading between the lines and I reckon he meant
instances of his program. had he meant
"instances of classes" he'd have said so. "instances
in a program" sounds like somebody more experienced
talking, which if he was, he'd know how to do limit
either instances of classes or instances of
his program, and wouldn't be asking. I could be
totally wrong, but I don't think I am; that's what I
inferred from his post. only the OP knows for sureInteresting.
The OP also said "to any number". So you were guessing that this particular user wants to only permit, for example, five instances to be run on any one box at one time? -
How to restrict the changes in Relesed PO?.
Hi all,
How to restrict the users to make a changes in the Released PO?. User should make the changes only if it is unreleased by the respective codes.
1. Is there any user parameters like functional authorisation?
2. I have already suggested two solutions to the clients that
1. To restrict the authorisation of TCodes ME22n at the user level, but it's not a suitable solution, if user want to make any changes before releasing, then system is not allow to do the changes.
2. I have made release indicator as a 1 - not changeable if it is released, in release strategy settings. But the system is not allowing the all the users including release codes to make the changes?.
If there is any solution, please reply immediately.
with regards,
Raja.hi,
if u set release indicator 1, after release is taken place, for any changes, u need to revoke the release. and then change the PO.
even u cant directly block the changes to already released PO, because, in future if at all qty or some changes is required to change, it should allow u to change! -
CIN: How to check the material document posted without excise invoice
Hi Guru,
Please advise how to check the material document posted without excise invoice.
I have tried tcode J1I7 but it seems start to collect the excise invoice first and then material document.
But my case is to find the material document WITHOUT excise invoice for internal tracking purpose.
At the moment we start from tcode MB51 to get the list of material document and check in J_1IEXCHDR / J_1IEXCDTL
Best regards,
PakornHi,
Try creating a Query in Tcode SQVI by combining tables MKPF and J_1IEXCHDR/J_1IEXCDTL for your requirement.
Check these threads how to create Query.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6018c1ae-8c44-2d10-6ea9-c3fad2c82880?QuickLink=index&…
http://ptgmedia.pearsoncmg.com/images/9780672329029/samplechapter/0672329026_CH03.pdf
Regards
Binoy -
How to restrict the job start conditions (only "Immediate" type) ?
Hi,
We allow our users to schedule and execute in background mode transactions (example IP19, IW38). We gave them for that authorizations (object S_BTCH_JOB with LIST, PROT, RELE and SHOW - objetct S_PROGRAM with BTCSUBMIT).
We would like that users can schedule and execute their jobs only with the u201CImmediateu201D job start condition (in the Start Time screen for the type of start condition : Immediate, Date/Time, After job, After event, or At operation mode).
Another solution: prohibit the scheduling and the execution background job in a certain time interval ...
How can restrict the job start conditions ?
Thank you.
Patrice.Hi Jan,
Yes, sa38 makes it possible indeed to execute in background into immediate mode a job but
the user have to know the name of the program to be carried out ...
The user knows only the name of these transactions trade. For example, IW38.
In the menu of this transaction, SAP gives the possibility to execute in background :
Program --> Execute in Background --> display of Start Time screen for the type of start condition :
Immediate, Date/Time, After job, After event, or At operation mode).
It is at this time there that we want that the user can only choose the "immediate" mode.
We must thus prohibit the other choices (Date/Time, After job, After event, or At operation mode) ... and
and we don't know how to restrict these other options in this screen "Start Time screen for the type of start condition".
Thank you.
By. -
How to restrict the department to not user other departments' equipment?
Dear SAPIENTS,
How to restrict the department to not user other departments' equipment? If suppose any one creating order for equipment having different authorization group then system should not allow me to do this.
Regards,
Kaushal RaiKaushal Rai,
Use Authorization group for technical objects, create authorization gruops in IMG and assign the same to the Equipment master and block the other department with the same authorization group. For ristricting the authorization group to other departments after creating and assigning it to the equipment seek help from your BASIS team.
goto the below path for cerating the Authorization group:
IMG - PMCS - Master data in PMCS - Technical Objects - Define Authorization groups:
Here you define the authorization groups, after completion of this step go to the Equipment master in General Data tab page there is a feild Authourization Group, mention the respective authorization group and provide this Authorization gruop value to the respective user in the user role with the help of BASIS Team.
Regards,
Praveen. -
How to restrict the duplicate values in lov column of VO based Adv Table
Hi Gurus,
I want to restrict the duplicate values at lov which is a colunm in an Adv Table.
If user enters duplicate values then first it should show an error msg that Duplicate values have been entered.
After the duplicate values have been removed, then the user can save all the values in the table.
My Adv Table is based on a VO.
The link how to restrict the duplicate values at form level
talks about Adv Table based on a EoVO, which doesnot work in my case.
My Approach,
I am iterating through RowSetIterator and committing through PROCEDURE.
I am able to avoid duplicate entry through a function checkRespId. (given below)
Below code is for iterating and committing.
public void saveline(String reqid,String userid)
System.out.println("RequestId/saveline"+reqid);
System.out.println("UserId/saveline"+userid);
OAViewObject vo = (OAViewObject)getRespLineVO1();
RespLineVORowImpl row = null;
int fetchedRowCount = vo.getFetchedRowCount();
RowSetIterator deleteIter = vo.createRowSetIterator("deleteIter");
if (fetchedRowCount > 0)
deleteIter.setRangeStart(0);
deleteIter.setRangeSize(fetchedRowCount);
for (int i = 0; i < fetchedRowCount; i++)
System.out.println("Inside the for LOOP");
row = (RespLineVORowImpl)deleteIter.getRowAtRangeIndex(i);
String respoidid = row.getAttribute("ResponsibilityId")+"";
String respname = row.getAttribute("ResponsibilityName")+"";
String stdate = row.getAttribute("StartDate")+"";
String enddate = row.getAttribute("EndDate")+"";
String linestatus ="A";
if(userid!=null)
if(!(respoidid.equals("null")) && respoidid!=null)
String checkingrespid=null;
checkingrespid = checkRespId(userid,respoidid);+contains no if not duplicate and yes if its duplicate+
System.out.println("checkingrespid for Resp with ID :"+respoidid+"exists or not "+checkingrespid);
if(checkingrespid.equals("No"))
String message, result = null;
Connection txn = getOADBTransaction().getJdbcConnection();
try
calling PROC ...
catch(Exception e)
message = "Error in Inserting into line" + e;
throw new OAException(message, OAException.ERROR);
else
throw new OAException("You have entered duplicate no. of values", OAException.ERROR);
else
System.out.println("respoidid is null");
break;
deleteIter.closeRowSetIterator();
public String checkRespId(String userid,String respoidid)
String createRow="No";
OAViewObject vo = (OAViewObject)findViewObject("CheckRespVO1");
if (vo != null)
vo.setWhereClauseParams(null);
vo.setWhereClauseParam(0, userid);
vo.setWhereClauseParam(1, respoidid);
vo.executeQuery();
System.out.println("ROW COUNT IS "+vo.getRowCount());
if(vo.getRowCount()>0)
createRow="Yes";
else
createRow="No";
return createRow;
Problem:
I remove the duplicate entries and click on save and get this error.
Unable to perform transaction on the record. \nCause: The record contains stale data. The record has been modified by another user.
\nAction: Cancel the transaction and re-query the record to get the new data.
Thanks,
SombitHi Anil,
I am trying out your code but stuck in inserting the rows
using your code in URL: http://oracleanil.blogspot.com/2010/09/oaf-passing-table-type-object-to-oracle.html
I am always getting the same exception i.e COde blast in when I run.
My modified code is:
String[] as = null;
Number[] vNumber = null;
Number[] vNumberrespid = null;
Number reqidnumber = null;
reqidnumber = new Number(Integer.parseInt(reqid));
Connection txn = getOADBTransaction().getJdbcConnection();
String mCreateSearchRequestStatement = null;
OAViewObject vo = (OAViewObject)findViewObject("RespLineVO1");
int j = vo.getFetchedRowCount();
try
System.out.println("abouce try");
vo.reset();
if (vo.getFetchedRowCount() > 0)
System.out.println(String.valueOf("Fetched row count ").concat(String.valueOf(vo.getFetchedRowCount())));
int i = 0;
as = new String[j];
vNumber = new Number[j];
vNumberrespid = new Number[j];
while (vo.hasNext())
vo.next();
System.out.println(String.valueOf("Inisde the do while loop").concat(String.valueOf(i)));
vNumber[i] = (reqidnumber);
vNumberrespid = ((Number)vo.getCurrentRow().getAttribute("ResponsibilityId"));
as[i] = String.valueOf(vo.getCurrentRow().getAttribute("ResponsibilityName")).concat(String.valueOf(""));
System.out.println("Request ID "+reqidnumber[i]);//getting null even there is some value selected
System.out.println("ResponsibilityId "+vNumberrespid[i]);//getting null even there is some value selected
System.out.println("Resp Name "+as[i] );//getting null even there is some value selected
i++;
CallableStatement cs = txn.prepareCall("{call XX_PassTableType.XX_PassTableType_prc(:1, :2,:3)}");
ARRAY array = new ARRAY(new ArrayDescriptor("APPS.JTF_NUMBER_TABLE", txn), txn, vNumber);
ARRAY arraynew = new ARRAY(new ArrayDescriptor("APPS.JTF_NUMBER_TABLE", txn), txn, vNumberrespid);
ARRAY array1 = new ARRAY(new ArrayDescriptor("APPS.JTF_VARCHAR2_TABLE_100", txn), txn, as);
cs.setArray(1, array);
cs.setArray(2, arraynew);
cs.setArray(3, array1);
cs.registerOutParameter(3, 2003, "JTF_VARCHAR2_TABLE_100");
cs.execute();
ARRAY error = null;
error = (ARRAY)cs.getArray(2);
if ((error != null) && (error.length() > 0))
System.out.println(String.valueOf("Error is ").concat(String.valueOf(error.getArray())));
String[] retError = new String[j];
retError = (String[])error.getArray();
System.out.println(String.valueOf("Error in saving data").concat(String.valueOf(retError[0])));
cs.close();
catch (Exception exception)
throw new OAException("code blast", OAException.ERROR);
Thanks,
Sombit -
How to restrict the change access in CRM for OLTP orders
Hi Guru's,
Please let me know how to restrict the change access in CRM for the orders that are created in ECC. The ECC orders will only for display in CRM but not for change,
We have the orders that are created in ECC, it will flows to CRM and should restrict the access to get in to the change mode in CRM but as of now CRM system is allowing change mode for ECC orders and ending up with errors.
Is there any additional middleware parameter that needs to be added to SMOFPARSFA table to get this functionality! Please advice! Thank your for your help.
Regards
SuneelHi.
You can use the PFCG role to control if the user is able to create, change, delete or only display a business transaction type.
Regards. -
How to Restrict the Rows In Pivot Table
Hi All,
how to Restrict the Row in the Pivot table.
My Requirement is like this.
i have to show the top 10 values in the pivot table but My report is show all the values.
how can we achieve this.
any quick solution for this appreciated.
Thanks,
Yogi.Yogi1729 wrote:
Hi All,
how to Restrict the Row in the Pivot table.
My Requirement is like this.
i have to show the top 10 values in the pivot table but My report is show all the values.
how can we achieve this.
any quick solution for this appreciated.
Thanks,
Yogi.You can't really restrict the rows in a pivot table, but you can do this:
http://oraclebizint.wordpress.com/2008/01/17/oracle-bi-101332-pagination-in-pivot-tables/ -
How to restrict the GR for Production Order when Goods Issue is not done
Hi Gurus
How to restrict the GR for Production Order when all the required components for production order are not issued with all required quantity. Even for partial issue system should not allow GR with 101. The user status with RMWA, RMWF & CGFB is not working.
Pls suggest best solution.
Abhijit.Hi,
You can club together the GI nad GR at the time of confirmation..
I.e Backflush for the components and auto GR for the Product.
So that you can stream line the Process.
The best Option would be to use the User Exit:
Enhancement - MBCF0002
Functional Module - EXIT_SAPMM07M_001
Include - ZXMBCU02
Refer below link for further details..
How to stop the goods receipt before issueing the goods for production orde
Regards,
Siva -
How to restrict the user in MIRO for not modifying price
Hi All
My requirement is How to restrict the users in MIRO screen for not modifying Material Prices of only the for specific ROH types .
For example :
Valuation class RM description
3021 RM - A
3022 RM - B
3024 RM - C
when ever we procure the above Raw materials A,B and C and
the Quantity of each Raw material @ 10 units and value @ 1 INR for each unit
RM - A procured qty 10 @1 total price is INR 10
RM - B procured qty 10 @1 total price is INR 10
RM - C procured qty 10 @1 total price is INR 10
total price of PO is INR 30
when we received invoice material prices are assume it INR 1 is excess for each material.Now the invoice price for each RM has become INR 11.
in MIRO we want restrict the user to change the price from INR 10 to 11.
suggest the best possible ways to restrict in MIRO screen
Thanks & Regards
MalaDear:
Take help of ABABPER fo implement exit using INVOICE_UPDATE or MRMH0003 Logistics Invoice Verification: Revaluation/RAP exit. If this does not help then seek help of MM functional who will help you to find exit for the required task.
rEGARDS -
How to restrict the delivery quantity not more than target quantity?
Dear Gurus,
How to restrict the delivery quantity not more than target quantity in a scheduling agreement? I think there are 2 methods.
1. I found that setting 0 in Overdelivery Tolerance Limit in Info Record is not effective. Why?
2. I want to set E for the message but can't find the place. The message is generated when entering and saving quantity as delivery quantity that is larger than target quantity. How can I set E to a message (067, as I remember)
Any other effective method? Please advice. Thanks.
Regards,
DavidDear all,
It is not OK after checking everywhere you mentioned. I tested in 2 clients. In the development enviroment client, it works whatever E or W. In test enviroment, it does not work (meassge is W).
I think there must be somewhere besides of those you menetioned.
I notes that SAP help for the overdelivery tollerance setting of scheduling agreement:
Overdelivery Tolerance Limit
Percentage (based on the order quantity) up to which an overdelivery of this item will be accepted.
Dependencies
If you have set the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed), this takes priority. It makes no sense to define a tolerance limit for overdelivery in such case.
Where can I see: 'the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed)'? I want to check it.
Pls help! Thanks.
Regards,
David -
How to restrict the quantity & rate of MIRO with MIGO and PO
Hi friends,
Can any body tell me how to restrict the quantity & rate of MIRO with MIGO and PO.
e.g. if we have done MIGO for quantity 10 and the rate maintained in the PO is Rs.100.Then at the time of MIRO system should not allow to change the quantity and rate.
How we can do this?
Regards
Purnesh SharmaHi,
You are misunderstanding the use of MIRO.
If you change the details in MIRO you are NOT changing anything. You are just entering the price and quantity from the Invoice.
If this price and or qty is different from the GR aqty and PO price then the system will block the invoice for payment (and it can issue messages toinform the buyer if configured correctly).
The whole design of MIRO is based on the principle that you enter EXACTLY what the vendor has put on the invoice. By preventing the users from changing anything you will get NO mismatched invoices, but you will not be paying the vendor the amount specified on their invoice. This will surely cause problems.
If you do want to ensure that ONLY the GR qty and the PO price are used and cannot be changed then why not consider using ERS (Eveluated Receipt Settlement. this is basically self billing.
Effectively you will be paying the vendor based on what you have received in MIGO multiplied by the price from the PO. (which is what you would be doing if you stop any changes in MIRO)
Steve B -
How to restrict the upload file size in me21n/me22n/me23n?
Hi Guru's,
I have a requirement to restrict the user from attaching a local file more than 20MB in Purchase Order.
In standard SAP system, the user can attach a file of any size in PO. How to restrict the size of the file?
I have no clue how to achieve this? Any kind of help would be great...
Thanks in Advance...
Regards,
SatyamHi Guru's,
The file size is now restricted in function GUI_UPLOAD. But this function module is used at many places. I want to restrict it only for Tcode: ME22n and ME23n.
I thought of restricting it by sy-tcode field but sy-tcode value is not passed to this function module in the run time.
Could anyone help me on this how to restrict it for the above mentioned tcodes??
Regards,
Satyam
Maybe you are looking for
-
How to convert IDoc-XML to native Idoc-File with in SAP XI/PI
Hello, I have a problem to Create an native IDoc-Format for an File-Receiver. The scenario: I get an Idoc (ZMATMAS) from a SAP System to an MATMAS-exchange-scenario. One of the non-SAP-receiver-systems needs an other native IDoc-Format as File. So I
-
When trying to update to iOS 7.0.4 I get a message saying that the update has failed. I've followed the instructions on Apple Support. Has anybody else had this problem and if so, how did you get over it?
-
Problem when using javax.crypto.KeyGenerator in netbeans
This is my IDE information: Product Version: NetBeans IDE 6.0.1 (Build 200801291616) Java: 1.6.0_03; Java HotSpot(TM) Client VM 1.6.0_03-b05 System: Windows XP version 5.1 running on x86; Cp1252; en_US (nb) I am trying to develop a Test jar file. I c
-
.dmg files? can I delete?
When installing applications or updates on your Mac, can you delete the .dmg files? I've installed a few freeware applications such as MSN Messenger, Lab Tick, Flip4Mac, aMSN etc... and also updates for various applications. Once i've an application
-
Trouble calculating empty fields
I have a calculation (script below) where DN or DV are not always part of the sum. Trouble is both DV and DN have to be filled in to get the result. How can I script these 2 fields to where one or both are calculated? SUM=(PD1*DN*DV[WD1*CT])/BPY