How to restrict the ordering of apps from within an app

My grandkids somehow run up charges by ordering apps from within an app they are using usually games  without even knowing they are doing it. How do I restrict them from doing it?  And how do I get the charges to Itunes removed when this happens?

You can go into settings, and restrictions and turn off 'in app purchases'
You may also want to set your apple id from 'require after 15 minutes' to 'require immediately'
As to getting the charges reversed you can contact the app developer. Maybe they will reverse the charges, but they don't have to. The terms of sale are that all sales are final.

Similar Messages

  • How to restrict the Order TECO wiht out serviceentry sheet / usage Decision

    Dear PM Guru's
    i am seeking a good solution for the following issue. suppose one external order created, against to this PO created, but maintenance people TECO the order with out creating the service entry sheet. how i can restrict this functionality? please suggest me good solution which is very simplicity. and some of the orders are TECO with out the usage decsion taken against the Inspection lot, here also how i can restrict the TECO the order is there any function module or enhancement to avoid such a mistakes? please guide me and give an good idea to sort out this issue as soon as possible.
    thanks in advance to all the PM guru's.
    regards
    jalu

    Hi,
    By doing the user exit in IW32 we achieved the requirement of restriction of maintenance order TECO functionality if any Service Entry sheet pending with reference of maintneance order.
    regards
    JKM

  • How to restrict the excess quantity delivery from the delivery note ?

    Dear All,
    As we know we make the delivery note with the reference of sales order so ordered quantity will be copied in the delivery note automatically. At the time of picking we can reduce the delivery quantity and make the partial delivery.
    But for example I have the sales order of quantity 5 and I make the delivery with refernce of same Sales order so my delivery quantity comes 5 and now if I make the quantity 7 instead of 5 in delivery note only and do the picking of 7 quantity yet system is allowing me then PGI is also possible. It means I delivering excess good than the ordered quantity. Which should not happen to make the cycle full proof.
    I dont what setting is required to avoid this major error. please Gurus Reply soon.
    regards,
    Vojas

    Hi,
    Use t-code 0VLP, select your item category which u determining in delivery >>> Go to details>>>in fron of Min/Max Qty put option B
    Check minimum qty   --- B (Situation rejected with an error message)
    Check overdelivery  --- B (Situation rejected with an error message).
    When user try to change qty,system will give error.
    Kapil
    Edited by: Kapildev Farakte on Dec 28, 2009 10:33 AM

  • How to change the order on my photos within a file?

    When I sync my phone and it downloads a photo folder, no matter how I organize the photos in the folder they ends up on my phone in the order the photo was taken. I would like to organize my photos in the order I would like. Can you advise please.
    Message was edited by: Proparoo

    Incidentally, these were the instructions that I originally followed to try to change my user name:
    1. Enable the root user.
    2. Log in as root.
    3. Navigate to the /Users folder.
    4. Select the Home folder with the short name you want to change, and rename it just like you would rename any folder. Keep in mind that the shortname must be all lowercase, with no spaces, and only contain letters.
    5. Use the Accounts pane in System Preferences to create a new user with the short name that you used in the previous step.
    6. Click OK when "A folder in the Users folder already has the name 'short name'. Would you like to use that folder as the Home folder for this user account?" Note: This will correct the ownership of all files in the Home folder, and avoid permissions issues with the contents.
    --> this is the part when things went wonky. I was never able to create the new user with the old shortname - I didn't even get the dialog box in step 6, it just gave me a red arrow and kept telling me that shortname was already being used, I didn't even have the option to use it for the new account.
    7. Choose Log Out from the Apple menu.
    8. Log in as the newly created user. You should be able to access all of your original files (on the desktop, in Documents, and in the other folders of this Home).
    9. After verifying that your data is as expected, you can delete the original user account via the Accounts pane of System Preferences.
    10. Disable the root user.
    I think I'm just going to leave things alone though. It's not a big enough deal to merit all this trouble! Thanks for all the help though! I really appreciate it.

  • How to get the RGB Working Space from within a Filter Plug-In?

    Within my Filter Plug-In I need to access the image's icc profile data. I know this can be accomplished with the according data structure 'iCCprofileData'. But what if there is no profile assigned to the image? Then iCCprofileData is NULL and the default should apply which is the 'RGB Working Space' (assuming the Plug-In works in RGB mode only, what it does). But how can I get to know what the 'RGB Working Space' is from within my Plug-In?

    As far as I know, the profile provided to the plugin API should never be NULL. If the image is not color managed, it still should have the working space profile in the ICCProfileData field.

  • How to get the edit channel link from within the channel?

    Following problem:
    I want to include a link to edit the settings of a channel in the channel contents. The link should be the same as the edit button on the frame of the channel container. Searching through the provider jsps I found that the edit link is created in single.jsp. The code I need seems to boil down to
    <dt:obtainContainer container="$JSPProvider">
      <dtsingle:singleContainerProvider>
      <dtpc:getStringProperty key="editContainerName" id="editContainerName" scope="request"/>
      <dt:getName id="SingleContainer" scope="request"/>
      <jx:declare id="editContainerName" type="java.lang.String"/>
      <jx:declare id="SingleContainer" type="java.lang.String"/>
        <dtsingle:obtainSelectedChannel>
    <A HREF="<dtpc:getDesktopURL/>?action=edit
    &provider=<%=editContainerName%>
    &targetprovider=<dt:getName/>
    &containerName=<%=SingleContainer%>"
    TARGET="_self"> EDIT! </A>
        </dtsingle:obtainSelectedChannel>
      </dtsingle:singleContainerProvider>
    </dt:obtainContainer>However I am unable to get that working in the channel, as I always receive a ProviderException on the line with
    <dt:obtainContainer container="$JSPProvider">
    What am I doing wrong, or is does the obtainContainer simply not work from within a channel?
    If anyone can help me out to get the edit link it would be greatly appreciated. Any hints and/or sample code would help alot.
    thanks!
    Message was edited by:
    obstler42

    Hi Detlev ,
    Thank you very very much . We could figure out how to get the URL and Driver information from there .I have rewarded the points also.
    Thanks
    Ravi
    Message was edited by: Ravi Krishnan

  • Anyone know how to move the order of songs around within a playlist?

    I'm am trying to put songs in a playlist in a specific order (for an exercise routine).  Anyone know how to do that without deleting them all and dragging them over in the correct order?  Seems like you ought to be able to drag and drop to change the order but that doesn't seem to work.

    You can drag them in the order that you want using iTunes, I just tried doing it and it worked.
    You can also sort using the column headers. Whatever order you have them in the playlist, they will sync to the iPod.

  • How to get the Weblogic Server Id from within java code

    I would like to log which server (among a cluster) a certain job is running on. Is there a way to get the server id from within Java code (this code is in a session bean if that is relevant.)
    By server id I mean the "Name" column in the summary of servers on the weblogic console.
    Thanks,
    ken

    Use the two entries close to the bottom of the page: "list WebLogic
    MBeans:listMBeans.jsp
    display MBean attributes and operations:showMBean.jsp"
    Nils
    Anatoly wrote:
    >
    Cameron,
    That page has these items on it:
    which one do you think helps with my issue?
    Misc WebLogic examples
    LongRunningTask
    Execute tasks in parallel using WebLogic Execute Threads
    Weblogic stats (5.1)
    Reload Servlet(s) programmatically (5.1)
    Network classload from WebLogic:using reflection,or the launcher
    Weblogic 5.1 debugging properties
    Seppuku pattern readme
    Using dynamic proxies to intercept EJB invocations (6.1)
    list WebLogic MBeans:listMBeans.jsp
    display MBean attributes and operations:showMBean
    Thanks to Marcelo Caldas for filter by type option and nice UI!
    Using com.sun.jdmk.comm.HtmlAdaptorServer with WebLogic 6.1
    Cool
    EJBGen
    Dimitri
    back
    "Cameron Purdy" <[email protected]> wrote in message news:<3c7a745d$[email protected]>...
    JMX ... see http://dima.dhs.org/misc/ for some info on JMX in Weblogic.
    Peace,
    Cameron Purdy
    Tangosol, Inc.
    Clustering Weblogic? You're either using Coherence, or you should be!
    Download a Tangosol Coherence eval today at http://www.tangosol.com/
    "Anatoly" <[email protected]> wrote in message
    news:[email protected]..
    Does anyone know who to get the managing server URL's port
    from within the EJB code running on Weblogic 6.1?
    The URL port is not default (not 7001), but when creating
    initial context, I am not specifying the URL in properties.
    Due to that, trying to the the PROVIDER_URL property from
    environment does not return anything.
    Appreciate any responses.
    -Anatoly
    ============================
    [email protected]

  • How to restrict the order reason in Tcode Va01 while creating sales order

    Hi Gurus,
    My requirement is
    while creating sales order in VA01
    if order type is Zvol
    than the list of order reasons has to be restricted.
    Now 15 are coming from OVAU  tcode
    I need only 5 from these.
    Thanks & Reagrds
    kals.

    Hi,
    By doing the user exit in IW32 we achieved the requirement of restriction of maintenance order TECO functionality if any Service Entry sheet pending with reference of maintneance order.
    regards
    JKM

  • How would I remove a Trojan horse from within an app that the app creators may have been asked to put their illegally

    I believe I have a corrupted app, which is corrupting my phone or my phone is corrupted by some kind of malware. Does the diagnostics and data entry's show these as I have no clues as to what these entry's values or meanings are.. I believe a dating app has been given unsubstantiated untrue info about me and they now corrupt there own app on my phone. They do not respond to my
    Support emails. Is assuming or being told untruths give developers the right to corrupt thier own app against an innocent user of there app. If they're doing this it's been happening for a long while and it's depressing as he'll. any help on this which could be nothing would be truly
    Appreciated. My gut says something is on my phone and they interfere in my everyday life.

    Does the diagnostics and data entry's show these as I have no clues as to what these entry's values or meanings are..
    No.
    Uninstall the app and write a review of your experience with it. Be specific, including the developer's apparent disinterest in addressing your concerns. Reviews are the only means by which prospective purchasers can evaluate an app.
    There are likely to be plenty of better ones available.
    My gut says something is on my phone and they interfere in my everyday life.
    Other than the app itself, that's unlikely. The app itself is probably junk. If you believe the app is inappropriate for whatever reason, consider bringing it to Apple's attention. To do that read how to report a problem with your purchase.
    Social networking apps including dating apps are by far the most common means of extracting personal information from you, to be used for any conceivable purpose. There is no guarantee some of them might not simply get it wrong, either intentionally or otherwise.

  • How to restrict the Material (MRP relevant )from manual creation of Pur Req

    Hi,
    If we have a material "ABC"  which has MRP type as "PD" (MRP relevant) in Material Master.
    If we don't want to give user the option of creating manual Purchase requisition for Materail "ABC", Whether this is possible in Std SAP ? If yes, then How?
    Thanks in advance,
    Pravin

    Hi,
    In standard there is no option to restrict at material level.
    But using BADI ME_PROCESS_REQ_CUST method PROCESS_ITEM you
    meet your requirement easily.
    Regards,
    Sunitha.

  • How to Restrict the consumer data flow from CRM to R/3

    Hi Experts
    I have a scenario where my client doesn't wish to flow consumers data into R/3 which are created in CRM's B2C shop.He wants to map consumer data with R/3 One time customers so that further process such as Delivery  and all take place and this status gets updated in B2C shop via CRM
    hence i request you all could you please help me to solve my issue
    i would appreciate you help
    Thanking you in advance
    Regards
    Rao.

    Hi Mark
    thanks very much for you reply
    See my scenario is i have set up the B2C SHOP  in CRM not in ECC  as and when consumer gets  register in B2C SHOP  he creates an Order,  so standard functionality is that  CRM  Order needs to flow into R/3 along with  consumer data such as (sold_to,ship_to_bill_to---) for further process like delivery and billing.
    Now my requirement is client does not wish consumer data should be flown into R/3 for which he wants to map consumer data which is created in CRM to  R/3 with One Time customer for delivery, so that when ever consumer gets created in B2C SHOP it should map with the same R/3 One time customers
    which means that very time one time customer data should be replaced with consumer data which are created in B2C shop.and delivery should take place
    so could you please help me is there any way to resolve my issue
    Thanking you
    Regards
    Rao

  • How to launch the default web browser from a java app on MAC

    I know, this topic has been brought up over, and over, however I couldn't find info regarding MAC environments. I don't have any former experience with MAC, but now I'm getting desperate for a solution. I need to be able to pop up the default browser showing a certain URL on MAC/OS. Any clue would be appreciated.
    thanks,
    m. berdan

    I wrote libraies that will do this:
    http://ostermiller.org/utils/Browser.html
    I also keep a list of other resources to help you out:
    http://dmoz.org/Bookmarks/D/deadsea/Java_Help/Web_Browser/
    Stephen

  • How to restrict the the oreder reason list while creating sales order

    Hi gurus,
    Can anyone suggest me
    how to restrict the Order rerson list
    while creating the sales order in VA01
    Thanks & Regards
    kalyan.

    hi,
    Try this exit:
    Enhancement            MMFAB001     User exit for generation of release order                    
    Thanks,
    AMS

  • Restrict the Order no Whe we select the Taxable asset in account assignment

    Hi Gurus,
    In the BADI BBP_DOC_CHANGE_BADI I have implemented a code to populate the default Asset in the et_account table and it is getting reflected in the portal,
    But my issue is the Order no also gets populated based on the default Asset which is happening after the BADI get triggered.
    Please help me how to restrict the Order no getting populated since it is picking up from the table ANLA (R/3), suggest me any BADI to restrict the same.
    Regards
    Paul

    Hi Dave,
    But I need to restrict the Order no getting populated in the portal when we clear the field ET_ACCOUNT-ORDER_NO within the BADI (BBP_DOC_CHANGE_BADI) then also the Order is getting populated in the portal, suggest us any OSS notes or any other way of doing it.
    Regards
    Dhanoo

Maybe you are looking for

  • CF return name/value pairs???

    How can I get CF to return a name/value pair? (fwiw I'm working through Flash and PHP Bible but trying to substitute CF instead)

  • J2EE Engine not Start

    Hi, We just installed CRM 2007(ABAP+JAVA stack) with NW 2004s SR2 UC-Kernel 7.00 and NW 2004s SP12 Java based SW Component.  All of them are new installed in our system.The operation system is Windows server 2003 enterprise x64, database is oracle 10

  • How to run Conc program from Menu.Pls Help.

    Hi, In PO Screen i want to enable the user to run a concurrent request by clicking on a top menu. Say I have a prompt called "Purchase Order", clicking on it should run a Custom concurrent program passing some parameters from PO Screen.Output should

  • ITunes art doesn't stick

    I've recently imported some CDs into iTunes. I find artwork on the internet and paste it in. A few days later I see that some of what I had pasted has disappeared. Why does this happen? I'm using iTunes 10.6.1 and I have iTunes Match. The tracks that

  • Cannot find a list of websites visited in cache or temp internet files...Help, please...

    I cannot find the list of websites visited in cache or temp internet files. I see it in my history, but want to check the other in case someones deletes the history. Thank you...