How to restrict the quantity & rate of MIRO with MIGO and PO

Hi friends,
Can any body tell me how to restrict the quantity & rate of MIRO with MIGO and PO.
e.g. if we have done MIGO for quantity 10 and the rate maintained in the PO is Rs.100.Then at the time of MIRO system should not allow to change the quantity and rate.
How we can do this?
Regards  
Purnesh Sharma

Hi,
You are misunderstanding the use of MIRO.
If you change the details in MIRO you are NOT changing anything. You are just entering the price and quantity from the Invoice.
If this price and or qty is different from the GR aqty and PO price then the system will block the invoice for payment (and it can issue messages toinform the buyer if configured correctly).
The whole design of MIRO is based on the principle that you enter EXACTLY what the vendor has put on the invoice. By preventing the users from changing anything you will get NO mismatched invoices, but you will not be paying the vendor the amount specified on their invoice. This will surely cause problems.
If you do want to ensure that ONLY the GR qty and the PO price are used and cannot be changed then why not consider using ERS (Eveluated Receipt Settlement. this is basically self billing.
Effectively you will be paying the vendor based on what you have received in MIGO multiplied by the price from the PO. (which is what you would be doing if you stop any changes in MIRO)
Steve B

Similar Messages

  • I want to transfer pictures from my iphone 4 to a hardrive, but the problem is i dont know how. Can the genius bar help me with that, and can they possibly do this for me if i bring my iphone and hard drive with me there. Also if there is a cost, how much

    I want to transfer pictures from my iphone 4 to a hardrive, but the problem is i dont know how. Can the genius bar help me with that, and can they possibly do this for me if i bring my iphone and hard drive with me there. Also if there is a cost, how much?

    iOS: Importing personal photos and videos from iOS devices to your computer

  • In Free goods how to restrict the quantity to not to alter.

    Dear All,
    I have maintain condition record for free goods in VBN1.EX.102.While creating sales order for 20 quantities system populates 204.But if am changing this as 152 or 205,system is allowing to do.Same is the case at delivery.How can we restrict the system to not to allow the changes in sales order in case of free goods .Please guide me.
    Regards,
    Deepti

    Hi
    KIndly check the  below user exit and make the free goods item as in display mode
    MV45AFZZ 'USEREXIT_FIELD_MODIFICATION'
    to change the SCREEN-INPUT = 0 to make it display  for free goods item category Tann
    By doing above if any one changes main item  system will accordingly change the free goods item also
    Regards
    Damu.

  • How to restrict the Qty & Val in MIRO for Customs

    Hi Xperts
    I have a reqmnt.
    I have found in case of Import procurement process , we are not using GR based IV Indicator in the PO.Also we need to perform MIRO for Customs prior to GR.
    1. Hence users need to manually enter the qty/val for all the duties during MIRO(Custom). I have also chkd that users can enter more than the PO-Qty & more then PO-Condition Value as well during that.
    2. Also user can do MIRO(for Custom) multiple times as they wish, though MIRO(Custom) has already been completed for that item.
    Ho to restrict the above in AP?Plz suggest.
    Rgds
    Soumick

    You requirement can be achieved by enhancement in MIRO.
    Check these exits related to MIRO
    Enhancement/ Business Add-in            Description
    Enhancement
    LMR1M001                                  User exits in Logistics Invoice Verification
    LMR1M002                                  Account grouping for GR/IR account maintenance
    LMR1M003                                  Number assignment in Logistics Invoice Verification
    LMR1M004                                  Logistics Invoice Verification: item text for follow-on docs
    LMR1M005                                  Logistics Inv. Verification: Release Parked Doc. for Posting
    LMR1M006                                  Logistics Invoice Verification: Process XML Invoice
    MRMH0001                                 Logistics Invoice Verification: ERS procedure
    MRMH0002                                 Logistics Invoice Verification: EDI inbound
    MRMH0003                                 Logistics Invoice Verification: Revaluation/RAP
    MRMN0001                                 Message output and creation: Logistics Invoice Verification
    Business Add-in
    INVOICE_UPDATE                    Business Add-In: Logistics Invoice Verification
    refer below link
    Code To Find BAdi - ABAP Development - SCN Wiki

  • How to restrict the quantity in bex  query?

    Hi all,
    i have created a query using infosets and it looks like this :
    material   cost      tax amount units
    madhb    21,693   1,443.42   99 each.
    I want to restrict the query in such a way only one unit value need to be displayed.
    How to restrict it by showing only single unit.
    The expected result should be like this??
    material cost  tax amount units
    madhb    293   144        1 ea
    Can anyone let me know how to restict the quanity so the query will display the results only for one unit.
    thanxs
    haritha

    Hi Pradiba santosh,
    I have created a conditions and restricted the key figured.
    zunit equal 1.
    and i have saved and executed the query. But still it displayed for all the units. And it didnt display the query for one unit. Why is that so?
    can you let me know what went wrong on it?
    thanxs
    haritha

  • How to maintain different exchange rate for MIRO(customs), MIGO -inventory?

    Hi,
    My client requirement is like the MIRO for custom clearing agent has to happen @ the exchange rate mentioned in Bill of entry but the Inventory value has to be updated @ some other exchange rate - (exchange rate computation made with respect to vendor invoice)
    Regards,
    archu

    Hi Balla,
    To change exchange rate in MIRO, follow the following process:
    1)  Go to MIRO
    2)  Enter Invoice date, Reference and change the currency to USD
    3)  Go to details tab  page and enter the rate that u require
    4)  Enter the PO no and press enter and proceed as usual.
    Kindly note that once u put inthe PO no and press enter the ex rate field in details tab becomes uneditable.
    Regards,
    Kiran

  • How to find the quantity of items under WIP job and under PO?

    Hi,
    How can I find the quantity of the Items that are under:
    1. WIP Jobs that are not yet completed?
    2. PO that are not yet received?
    Kindly help me. If you have proper query for it, let me know.
    Regards,
    KM

    select  e1.empno,
            e1.ename,
            e2.direct_managed_employee_count
      from  emp e1,
             select  mgr,
                     count(*) direct_managed_employee_count
               from  emp
               group by mgr
            ) e2
      where e2.mgr = e1.empno
         EMPNO ENAME      DIRECT_MANAGED_EMPLOYEE_COUNT
          7566 JONES                                  2
          7698 BLAKE                                  5
          7782 CLARK                                  1
          7788 SCOTT                                  1
          7839 KING                                   3
          7902 FORD                                   1
    6 rows selected.
    SQL> SY.

  • How to restrict the user in MIRO for not modifying  price

    Hi All 
    My requirement is How to restrict the users in MIRO screen for not modifying Material Prices  of only the for specific  ROH types .
    For example :
    Valuation class             RM description
      3021                             RM - A
      3022                             RM - B
      3024                             RM - C
    when ever we procure  the above Raw materials A,B and C and
    the Quantity of each Raw material @ 10 units  and value @ 1 INR  for each unit
    RM - A procured qty 10 @1 total price is INR  10
    RM - B procured qty 10 @1 total  price is INR 10
    RM - C procured qty 10 @1 total  price is INR 10
    total price of PO is INR 30
    when we received invoice material prices are  assume it INR 1 is excess for each material.Now the invoice price for each RM has become INR 11.
    in MIRO we want restrict the user to change the price from INR 10 to 11.
    suggest the best possible ways to restrict in MIRO screen
    Thanks & Regards
    Mala

    Dear:   
                      Take help of ABABPER fo implement exit using INVOICE_UPDATE or MRMH0003 Logistics Invoice Verification: Revaluation/RAP exit. If this does not help then seek help of MM functional who will help you to find exit for the required task.
    rEGARDS

  • How to restrict the delivery quantity not more than target quantity?

    Dear Gurus,
    How to restrict the delivery quantity not more than target quantity in a scheduling agreement? I think there are 2 methods.
    1. I found that setting 0 in Overdelivery Tolerance Limit in Info Record is not effective. Why?
    2. I want to set E for the message but can't find the place. The message is generated when entering and saving quantity as delivery quantity that is larger than target quantity. How can I set E to a message (067, as I remember)
    Any other effective method? Please advice. Thanks.
    Regards,
    David

    Dear all,
    It is not OK after checking everywhere you mentioned. I tested in 2 clients. In the development enviroment client, it works whatever E or W. In test enviroment, it does not work (meassge is W).
    I think there must be somewhere besides of those you menetioned.
    I notes that SAP help for the overdelivery tollerance setting of scheduling agreement: 
    Overdelivery Tolerance Limit
    Percentage (based on the order quantity) up to which an overdelivery of this item will be accepted.
    Dependencies
    If you have set the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed), this takes priority. It makes no sense to define a tolerance limit for overdelivery in such case.
    Where can I see: 'the indicator in the Partial delivery/Item field to 'D' (partial delivery allowed)'? I want to check it.
    Pls help! Thanks.
    Regards,
    David

  • How to restrict the GR for Production Order when Goods Issue is not done

    Hi Gurus
    How to restrict the GR for Production Order when all the required components for production order are not issued with all required quantity. Even for partial issue system should not allow GR with 101. The user status with RMWA, RMWF & CGFB is not working.
    Pls suggest best solution.
    Abhijit.

    Hi,
    You can club together the GI nad GR at the time of confirmation..
    I.e Backflush for the components and auto GR for the Product.
    So that you can stream line the Process.
    The best Option would be to use the User Exit:
    Enhancement - MBCF0002
    Functional Module - EXIT_SAPMM07M_001
    Include - ZXMBCU02
    Refer below link for further details..
    How to stop the goods receipt before issueing the goods for production orde
    Regards,
    Siva

  • Restrict the quantity fields from changing in ME54N during PR release

    Hi All,
    I have created a workflow for purchase requisition release strategy .  Apporver's will login into ME54N transcation from the attachment in email and provide Release/Reject on PR . At that when any approver login to ME54N the item detials are in change mode so that user can able change quantity or other fields in the ME54N Transaction . So how to restrict the Approvers for not changing any quantity fields on the PR when it is being released .
    Thanks and regards,
    Dilip Kumar

    Hi-
    I do agree with all other comments.
    Also discuss with you functional consultant, say if any of the field which determines release strategy is changed by the approver,  then end the current workflow instance and start the new workflow instance based on new release strategy (obviously new set of approevrs)
    This is possible as SAP will trigger the corresponding event, if any of the field which determines release strategy is changed, (if release stratgey is configured properly).
    You need to build the workflow in such a way, that if this event occurs, then end the current workflow instance and start the new workflow instance.
    Vinoth

  • How to restrict the changes in Relesed PO?.

    Hi all,
    How to restrict the users to make a changes in the Released PO?. User should make the changes only if it is unreleased by the respective codes.
    1. Is there any user parameters like functional authorisation?
    2. I have already suggested two solutions to the clients that
        1. To restrict the authorisation of TCodes ME22n at the user level, but it's not a suitable solution, if user want to make any changes before releasing, then system is not allow to do the changes.
        2. I have made release indicator as a 1 - not changeable if it is released, in release strategy settings. But the system is not allowing the all the users including release codes to make the changes?.
    If there is any solution, please reply immediately.
    with regards,
    Raja.

    hi,
    if u set release indicator 1, after release is taken place, for any changes, u need to revoke the release. and then change the PO.
    even u cant directly block the changes to already released PO, because, in future if at all qty or some changes is required to change, it should allow u to change!

  • How to restrict the job start conditions (only "Immediate" type) ?

    Hi,
    We allow our users to schedule and execute in background mode transactions (example IP19, IW38). We gave them for that authorizations (object S_BTCH_JOB with LIST, PROT, RELE and SHOW - objetct S_PROGRAM with BTCSUBMIT).
    We would like that users can schedule and execute their jobs only with the u201CImmediateu201D job start condition (in the Start Time screen for the type of start condition : Immediate, Date/Time, After job, After event, or At operation mode).
    Another solution: prohibit the scheduling and the execution background job in a certain time interval ...
    How can restrict the job start conditions ?
    Thank you.
    Patrice.

    Hi Jan,
    Yes, sa38 makes it possible indeed to execute in background into immediate mode a job but
    the user have to know the name of the program to be carried out ...
    The user knows only the name of these transactions trade. For example, IW38.
    In the menu of this transaction, SAP gives the possibility to execute in background :
    Program --> Execute in Background --> display of Start Time screen for the type of start condition :
    Immediate, Date/Time, After job, After event, or At operation mode).
    It is at this time there that we want that the user can only choose the "immediate" mode.
    We must thus prohibit the other choices (Date/Time, After job, After event, or At operation mode) ... and
    and we don't know how to restrict these other options in this screen "Start Time screen for the type of start condition".
    Thank you.
    By.

  • How to restrict the department to not user other departments' equipment?

    Dear SAPIENTS,
    How to restrict the department to not user other departments' equipment? If suppose any one creating order for equipment having different authorization group then system should not allow me to do this.
    Regards,
    Kaushal Rai

    Kaushal Rai,
    Use Authorization group for technical objects, create authorization gruops in IMG and assign the same to the Equipment master and block the other department with the same authorization group. For ristricting the authorization group to other departments after creating and assigning it to the equipment seek help from your BASIS team.
    goto the below path for cerating the Authorization group:
    IMG - PMCS - Master data in PMCS - Technical Objects - Define Authorization groups:
    Here you define the authorization groups, after completion of this step go to the Equipment master in General Data tab page there is a feild Authourization Group, mention the respective authorization group and provide this Authorization gruop value to the respective user in the user role with the help of BASIS Team.
    Regards,
    Praveen.

  • How to show the quantity in decimal in MIGO

    Dear expert,
    How to show the quantity in decimal in MIGO?? for example in material BOM the quantity is 12.480 but the quantity in MIGO is 13. it's automatically rounded.
    what should I do to show the decimal point in MIGO?
    Thanks
    Pauline

    Hi,
        Please check in su3 -
    defaults (Tab) -
    Decimal Notation.
        Change the decimal notation and logoff and login to apply the changes.
        I think it may help you.
    Regards
    Sreedhar Reddy

Maybe you are looking for