How to restrict users in separate OU's from seeing each others presence

We have an Enterprise Lync 2010 server environment in place, and are using msRTCSIP-GroupingID to restrict address book lookups. We are now looking to restrict presence viewing to only user within the same OU. In other words it should not be possible
to see the presence of a user outside of your own OU, unless that user allows it explicitly.
It seems that the Multitenant pack for Lync can arrange that, but it's just not feasible to install that when you already have an active Lync environment in production. Is it possible to achieve this separation another way? Maybe with msRTCSIP-TenantId?
(which is already available in our current schema)

Hi,
Using the GroupingID will completely separate the users into unique address books. But searching by SIP URI will always work and you cannot prevent the users from communicating with other Lync users in the same organization. If you want
to restrict presence viewing to specific users, you can try ABS Configuration Tool.
http://www.justin-morris.net/how-to-hide-users-from-the-lync-address-book/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found
there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support

Similar Messages

  • How to restrict user to get values only from F4 in selection screen

    Hi All,
       We have given a Search hlep for a parameter  in selection screen of a report,but now we are facing a issue, whlile executing the report user entering the data directly into  field instead of  selecting from F4 help.
      Do anyone  know how to restric the user from entering the data directly.
    i have searched the fourm ,but not get any good tread.
    Regards
    CB
    Moderator Message: Search harder, because there are many threads that have discussed the same issue before.
    Edited by: kishan P on Dec 27, 2010 4:00 PM

    You cna check my reply here To enter the value by selecting values from the F4 help only.

  • How to restrict users working on Windows 7 clients from accessing Windows Explorer and other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2

    Dear All,
    We are having an infrastructure setup of around 500 client computers managed through group policy.
    Recently the domain controllers have been migrated from Windows Server 2003 to Server 2008 R2.
    Since this account requires extremely strict environment, we need to figure the solution for restricting the users from access anything locally.
    It would be great if you can assist me with the following query.
    How to restrict users logged on Windows 7 clients from accessing Windows Explorer and browsing other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2 ?
    Can we disable Network Tab on the left hand pane ?
    explorer.exe is blocked already, but users are able to enter the Windows Explorer by clicking on the name which is visible on the Start Menu.

    >   * explorer.exe is blocked already, but users are able to enter the
    >     Windows Explorer by clicking on the name which is visible on the
    >     Start Menu.
    You cannot block explorer.exe when you do not replace the shell - the
    desktop you see effectively IS explorer.exe...
    Your requirement sounds like you need a custom shell:
    http://gpsearch.azurewebsites.net/#2812
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • How to restrict user to change original file in word document.

    Hi experts,
    I am begineer in DMS. I am not able to understand how to restrict user to make any changes to a word document attached any DIR or any object link.
    Ex: I have a created a DIR attaching a word doc to equipment master.
    However, the user is still able to make changes to that word document usign CV03 tcode. I am sure most of you might have faced this problem. Please respond.
    We are using SAP 3.1i version. It is very old version.
    Thanks in advance,
    Kiran

    Kiran,
           The task that you have mentioned could be accomplished by setting up a status network for your document type. While setting up the status network, SAP has defined statuses which could potentially lock objects and fields corresponding to that status type.
    More information could be found at
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/9f/857f3a1c7b11d294d200a0c92f024a/frameset.htm
    I am not aware of 3.0i but you can navigate to customisation --> Cross Application Components --> Document Management --> Control Data --> Define Document Types --> Click on a doc type and go to
    define doc status.
    Here if you define a document with status type S the object is essentially locked for editing.
    Sojan

  • !!!How to restrict user for making  changes in Sales order , partner level

    Hi all,
    Can anybody tell me how to restrict user for making  changes in Sales order  at partner level, is it through user exit?

    Hi Ruchi
    I hope u had gone to the screen fields which u want them not to be editable. So there u select all the fields contents which u do not want to to be changed and check the boxes with W.content and Display and save it. Once evrything is done u have to activate the particular transcation going in to the standard variants and put the name and click the activate button.
    Hope its clear
    Reward if help ful
    Sri

  • How To Restrict Users To Only Create Purchase Requisitions with Item Catalog?

    Hi, everyone 
    Please help me, 
    How To Restrict Users To Only Create Purchase Requisitions with Item Catalog? is it possible? 
    Regards,   Manuel

    Hi Steenie Norman
    First click on the text item ---> Tools ---> Property Pallete ---->
    and change the Keyboard State to Local Only also this Depend in your OS
    hope this useful ....
    Regards
    Mohammed

  • How to restrict user access in Oracle Application Server 10g (9.0.4)?

    Can anybody please let me know how to restrict user access in 10g AS? To be specific, how to allow http requests from specific IPs only?

    Hi,
    You have to edit httpd.conf and modify acces rights for each protected directory
    e.g.
    <Directory /var/www/sub/payroll/>
    Order allow,deny
    Allow from 192.168.1.0/24
    </Directory>
    then you have to restart Oracle HTTP Server
    jm--

  • How to restrict user at selection screen while executing in background mode

    hi all,
    how to restrict user at selection screen while executing in background mode
    Regards
    Deepak

    Hi,
    We can get the Program whether this is running in background or not then we need to use SY-BATCH, if the SY-BATCH is set to X then the program is running in Background,
    so in the INITIALIZATION event, you can use this SY-BATCH and check the User names, and give the error messsage which you want to restrict
    Regards
    Sudheer

  • How to restrict user to must enter value in compulsory fields

    Greetings !
    I had a personal information form. I want to restrict user to enter values in all fields e.g Compulsory fields (Username, D.O.B etc)
    how i restrict user to must enter value in Compulsory fields

    I created an example on apex.oracle.com
    http://apex.oracle.com/pls/apex/f?p=18686:1:0:::::
    like you see a red staric placed on ID it means it is complusory to enter because it is a primary key, i want this on every field or to restrict user to enter all data , if any field left blank it will give error "to Fill respective field ", but not on creation but on left blank (if user type ID e.g 12 and skip ename field and go on Job field it gives error to fill Ename first)

  • How to restrict user to change status.

    Dear All,
    we want to restrict users to change the status from set to assign to released status.
    is there any authorization object to restirct user to change status?
    i was trying with object CPRO_DPO Create Project Definition with activity 43 release ,but unable to do so.
    Please do need ful
    Regards
    Ravindra

    Hi Ravi,
    probably you need to create user status profile.
    Use TA BS02 to create status profile
    here you have to add authorization key which needs to be defined in BS52
    use b_user_stat auth object to give profiles in custom roles in PFCG
    Thus you can block access to change status
    Niranjan
    Let me know if it helps
    Points welcome
    Thanks Mathias
    Edited by: Niranjan Dandekar on Apr 2, 2009 1:21 PM
    Edited by: Niranjan Dandekar on Apr 2, 2009 1:21 PM

  • How to make users to select the date from calendar control my making the date field read only in date time control in external list in sharepoint 2010

    How to make users to select the date from calendar control only, by my making the date text field read only (don't want to let users type the date) in date time control in external list in sharepoint 2010. I am looking for a solution which can
    be done through sharepoint desginer / out of the box.
    thanks.

    Congratulate you got the solution by yourself. I am new to a
    WinForms calendar component, I feel so helpless on many problems even I'd read many tutorials. This question on the
    calendar date selection did me a great favor. Cheers.

  • How can I block someone in my family from seeing my email since it's in the Icloud but we share the same Apple account?

    How can I block someone in my family from seeing my email since it's in the Icloud but we share the same Apple account?

    You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (112024)

  • Ok so i am trying to home share with my roommate and we have where we can see each others music but how do i get his music copied into my itunes so when we dissconnect it will still be there (working off 11.1.2

    ok so i am trying to home share with my roommate and we can see each others music but how to i put his music into my itunes so that when we dissconnet it will still be on my computer ? we are both on version 11.1.2 of itunes

    Welcome to the Apple Community.
    Select the content you wish to import and use the import button at the bottom of the screen.

  • HOW CAN INVITE PEOPLE IN A GROU EVENT ON ICAL WITHOUT THEM SEE EACH OTHER EMAIL ADDRESS

    HOW CAN INVITE PEOPLE IN A GROU EVENT ON ICAL WITHOUT THEM SEE EACH OTHER EMAIL ADDRESS ?

    Hi, I never use any of these, but according to this it uses eMal, so I'd think moving the adressees to the BCC: field should do it.
    Not the To: or CC: feild.

  • WRT54G how I can setup 3 computers to see each other

    Hi I have 2 pc wired to wrt54g and one laptop set as wireless.
    I have no problem to get to internet.
    But how I can setup them to see each other.
    Do I need a hub or it can be done  just with router.
    Please let me know how this can be done.
    I am not an expert so please be with me.
    Thanks Jozef
    Windows XP
    Message Edited by Choco on 03-25-200708:54 AM

    You should lower down the security settings on the Zone Alarm.
    Make sure the File and Printer Sharing which is one of the features created by Microsoft should be configured properly on 3 computers.
    For more information on how to share files and printers on all of the 3 computers.
    Please visit this website.
    www.linksys.com/kb
    In the search field type-in file and printer sharing and this will bring up answers
    I am not a teener anymore, I am a woman now - DreamGirls

Maybe you are looking for

  • VBA:comboboxes to present same date in different formats...ADAPT WITH CHANGE IN DATE

    Hi all,  I'm very new to VBA and excel development, so please take that into consideration as you read on. I'm trying to create a work form for a database that (should) collect various information in comboboxes, including the date, the weekday, and t

  • Material Number prefix Isuue

    Hi Friends, In my SAP system we are using number range for material is as 12 CHAR. so we have created all materials with 12 no char only. We are this system for the past 3 yrs. Now all of a sudden my system is not accepting 12 CHAR material numbers,

  • Making storage location mandatory for one plant.

    Hi All ,        I want to make storage location field mandatory in ME21N for only one plant .Like in our organisation structure two comp codes 1000 and 3000 are there .Under each comp code one plant like under 1000 1000plant is there and under 3000 3

  • Help for Lyrics in Score problems.

    Words will not stay in alignment with notes above them, when the next word is added. If I try to correct or adjust the position the notes will then move away. If I ignore the movement I can finish up with some measures two or three times the required

  • Windows no cierra el proceso de adobe reader

    Buenas tardes. Tengo un ordenador con Windows 7 pro 64 bits que acaba bloqueándose porque cada vez que abro un documento con adobe reader, no cierra el proceso y los va acumulando en el sistema hasta que Windows se queda sin recursos. Gracias