How to retreive data from disabled iPhone 4

Hi.
I have permanently disabled iPhone 4. it is my wife`s phone who passed away.
i need to get photos and videos from the phone. The original computer which i synced it with doesn't help.
I have 2 computer and don't remember which one was that i synced it with,on one of them i had hard drive which crashed so i installed new one, so basically when i am connecting to iTunes on both computer it says "enter your pass code before connecting to iTunes" but on the phone there is no keypad to enter pass code, it says only "iPhone is disabled connect to iTunes"
i have all paperworks and proof that phone and phone number belongs to me.
So far nothing works.
1. I tried iFaith to dump SHSH blobs, but later found out that building IPSW is only for restoring, that it will not retrieve my data.
2. I tried iPhone Browser but it doesn't see my device
3. i did not try this yet, not sure how to do this
" http://modmyi.com/forums/file-mods/237321-how-iphone-data-recovery.html "
any suggestion, is there any body who have gotten data back from disabled iPhone?
please help me, i will really appreciate it. and will pay $$$$
i have all paperworks and proof that phone and phone number belongs to me.
here is my E-mail: [email protected]
Albert.

Hi,
Maintenance view will be created for database tables only.
Just display the maintainence from SE11 and click Tables tab in the screen
Here you can find the list of tables used to created for Maintainence view.
YOu can use these tables to write SELECT.
If you give us the maintainence table, we will help you.
Thanks,
Ramakrishna

Similar Messages

How to retreive data from a maintainence view?

Hi all,
I have used select query to retreive data from a maintainence view. But it gave me a syntactical error that XYZ is not in abap dictionary , it's a database / projection view?
So can't we get data from a view using select query?
Please share if u have answers.
Thanks & regards,
Chandru

Hi,
Maintenance view will be created for database tables only.
Just display the maintainence from SE11 and click Tables tab in the screen
Here you can find the list of tables used to created for Maintainence view.
YOu can use these tables to write SELECT.
If you give us the maintainence table, we will help you.
Thanks,
Ramakrishna

How to retreive data from a table and a structure

Hi experts,
I have a requirement to create an ALV report. I have to include fields from two tables 'PA0001' and 'CATSDB' and from one structure 'CATSAPPR'. I am able to retrieve data from tables using INNERJOIN. But i have no idea how to deal with Structure.
I know that structure does not contain any data.
But i am not able to find any transparent table which has field 'ORDERTEXT' . I found field 'ORDERTEXT' only in structure 'CATSAPPR'.
So please anyone tell me, either any transparent table which has field 'ORDERTEXT' or please tell me how to deal with structure, in this case.
Please help me,
Thanks in advance
Anu

check this
Table-Fields                     Short descriptn
AUFK- KTEXT          Order master data
COCH- KTXT              Process Management: Control Recipe Header
COCHP- KTXT             PI sheet: Control Recipe Header
COMPHDR- KTEXT    OCM: Comparison results, indiv. records for order headers
HIKO- KTEXT              Order master data history
MAAVC_MDO- KTEXT      MPO: Individual Master Data for Orders
MCHPVS- AUFTEXT                           Batch Record: Shadow Table for Link to Archive
OCMHOMO_ARCH- KFELD          Backup Table of Homogeneity List in Case of Archiving
PSJHIEDATA- KTEXT                       Hierarchy data to test LDB PSJ
TEWOCODEST- DESCRIPTION                      Order Codes (Texts)
TEWOCODET- KTEXT           Allocation of Message Codes to Order
VLCSMORDER- KTEXT                                                   VELO : Service Order
VSAUFK_CN- KTEXT               Version: Order master data
Yogesh N

How to Retreive data from custom list on specify conditions?

Hi All,
I have custom list.And the custom list data contains 100 rows of data.
my requirement is how to retrieve custom list data from specific condition like 20-30,50-70.
Assume that i want to fetch 20 record to 30th record.
How to use the caml query for the above situation.
Please assist me.
Rama

Hi
Thanks for posting your issue, Kindly browse the below mentioned URL to find related the CAML query example
http://karinebosch.wordpress.com/2012/02/03/caml-and-the-client-object-model/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

How to retreive data from structure MDEZ in T.code CO09

As per our requirement 2 new columns are needed in a customize report .i.e
- u201Cinc. lot dateu201D
- u201Cavailable inc. lotu201D
u201Cinc. lot dateu201D:to get the values for inc.lot.date
From second screen of CO09(program: SAPLATP4 and screen number: 400) pick first date where MRP element is u201CPOitemu201D, u201CShpgNtu201D or u201CPrdOrdu201D.
u201Cavailable inc. lotu201D: to get the values for available inc.lot
Pick u201CCum. ATP QTyu201D from the same row.
These data are stored in structure MDEZ. Actually I want dat00 and MNG04 based on field DELB0. If DELB0 filed is POitem or Prdord or ShpgNt then only I should retrieve the dat00 and MNG04. IF there are more than one POitem in MRP element then we should pick the first POitems' mrp date and *** ATP qty .Can you please help me out how to get these data from the structure MDEZ.
input parameters to get the values are material number and plant.

Hi,
First of all data is never stored in structure so there is no way you can retrive data from structure.
you are looking into the screen field and it is not mandatory that it will always point to a table.
Now the qestion remains how to get the data ? you need to find database table for that field there are many ways like SE84 or SE11 where used etc.
Try to find the table if you still have the problem feel free to get back.
Regards
Bikas

How to retreive data from the column of CLOb dataype in BPEL.

Hello Everyone,
I have a scenario in which i have two databses primary and secondary. In first bpel process i am checking if primary database is down then store the payload in temp staging table in secondary database. That payload is getting stored in a cloumn of CLOB datatype in a text format.
Now in second bpel process when primary is up i have to pull the data from the temp staging table...but here i want the data in the same format (like it came in the first process...the input payload format)....but as the CLOB will store the data as a text then how to reform that data in to ealier payload format.
Can any one pls suggest me the solution...
Thanks

Confirm that you have the VISA Run Time Engine on the target machine. If you do not have it installed, you can install the VISA Run Time Engine from ni.com.
Error -1073807346 Using VISA When Running LabVIEW Executable On Target Computer
Message Edited by Mathan on 10-12-2009 07:11 AM

How to retreive data from a field that contains a "|" symbol

Hi,
Hopefully my title won't confuse anyone .
Well I am trying to create a group which would display an employee name(s).
In my case, the value comes from a field which can contain multiple values separated by a "|" symbol. See picture below.
I am pretty sure I will have to write a formula for this but simply don't know where to begin or how to write it.
Table use in this example is "ProductionProjectGroups" and will be linking this table to the "Employees" table which will display the actual employee name.
Does anyone knows how to display data if there is a "|" symbol in the field?
If you request more info please let me know.
Thank you in advance for the help.
Joe

Hi Abhilash,
I am looking for help on how to extract the employee's name from this field.
I have also posted more pictures with details as requested.
Thank you
Joe

HT201269 how to move data from old iPhone to iphone6

I have data on an app on the old iPhone and want to move it to the application on the new iPhone6

If you set up your new iPhone from the backup of your previous phone, your data would be on the new phone.
Transfer content from an iPhone, iPad, or iPod touch to a new device

How to retrieve data from lost iPhone:

- My iPhone got stolen
- I synced with iTunes shortly before
-> Where can I find the latest pictures taken from my iPhone on my computer???

Photos in the iPhone camera roll are included in the iPhone backup. To extract data from that backup requires third-party software:
http://www.iphonebackupextractor.com/

How to retreive data from alv when using CL_GUI_ALV_GRID

Hi All,
I am using two subscreens to display 2 ALV grids in a screen using the OOPs concept and the class CL_GUI_ALV_GRID. I would like to download data from these two alv grids into an excel after any changes, i.e sort, filter or summation. I was able to capture data for sort and filter. The logic to capture summation and subtotals is becoming very complex. I need to simplify for better. I need help to see if there is any method which captures the changed data on the screen so that i can just call the method and retrieve the data to push into an internal table before downlaoding to excel.
Your help is greatly appreciated.
Thanks in advance.
Roopa

Step 1, define the method in class grid_hdr:
METHODS:handle_data_changed CHANGING e_valid TYPE c.
Step 2, process the method:
METHOD handle_data_changed.
    CALL METHOD zgrid->check_changed_data
      IMPORTING
        e_valid = e_valid.
ENDMETHOD.                    "handle_data_changed
Step 3, use the method in PAI:
DATA l_valid TYPE c.
CALL METHOD grid_hdr->handle_data_changed
    CHANGING
      e_valid = l_valid.
IF l_valid = 'X'.
ENDIF.
Also you can search BCALV_EDIT_* in your system.
Edited by: SAM XIAO on Nov 17, 2009 8:03 AM

How to remove data from stolen iPhone?

I'd recently went to a gathering and had my iPhone stolen. Unfortunately I didn't get around to starting an iCloud account so It's definitely not coming back (Fingers crossed though) I was hoping if there was some way of removing all my data to stop my thief from accessing it. I have a word passcode on it but didn't know whether or not someone could access it through iTunes.

You cant wipe it out if you havent set up iCloud, also they can access your calander and ur domain emal that is synced with your iPhone and also all of your music and videos. Hopes this helps.

How to retreive data from and external program

Hiii
I have a Zreport which produce an ALV and also the VF02 transaction which produce a amartform.
I will need to
1: From a new program extract from the Zreport the alv in sort of excel sheet and submit it by mail
2. From a new program extract the smartfroms found on VF02 and submit it by mail
please advise how i can get access to those two external program

Hi,
1: When you have an output in ALV why don't you use an EXCEL-Layou in this Report?
2: Print the smartform and send this as email from the spool (lot of examples in SDN, serach for this).
Regards, Dieter

How to retreive data from view

hi,
i have created a view with 8 fields. including reference unit for netwr field.
REPORT ZVIEWTEST.
data: begin of itab occurs 0,
      kunnr type kunnr,
      name1 type name1,
      ort01 type ort01,
      land1 type land1,
      vbeln type vbeln,
      erdat type erdat,
      netwr type netwr,
      end of itab.
      select * from zview001 into table itab.
      loop at itab.
      write: / itab-kunnr,
               itab-name1.
endloop.
when i am executing this program i am getting syntax error.
"the type of the database table and work area(or internal table)"itab" are not unicode convertible."
what does it mean?

Hi Prashanth,
Declare the internal table with the type of View.
Data : itab type table of zview001.
or write select query as
select * from zview001 into corresponding fields of itab.
Also you can uncheck the Unicode checks active (checkbox) in the program attributes.
{When you check that unicode checkbox, you should use an internal table without a header line. Instead you should declare a work area)
Hope it helps...
Lokesh Aggarwal
Please reward appropriate points
Message was edited by: Lokesh Aggarwal

How to Retreive data from the SAP by using BAPI's through the Web .

Shashi

<copy&paste_and_everything_else_removed_by_moderator>
Edited by: Julius Bussche on Sep 3, 2008 8:54 AM

Can I retrieve data from my iPhone 4 hard drive without the SIM card?

Can I retreive data from my iPhone 4 hard drive without the sim?

There is no hard drive in an iPhone, it is all solid state memory. If the phone is working you can always copy content from it. If it is not you will need to restore and activate it, and that requires a SIM card.

How to retreive data from disabled iPhone 4

Similar Messages

Maybe you are looking for