How to retreive individual tabs rather than tabs group

I use FF 15.0.1 under WXPP.
I inadvertently created "tabs group"...
Now, every new tab has an icon "show/hide the new tab page".
In "about:config", the only browser.panorama.* entry is browser.panorama.animate_zoom (default-boolean-true).
What can I do...?

Thanks for replying.
I tried to restart in Safe Mode, but id did not change anything (and I always used the default theme.)
Actually, after having been caught with Tab Groups, I came back to the usual tabs, including the arrows left and right to circulate through them and the small menu on the right "List all tabs" that I like to use by deleting the "sessionstore.js" file in my profile...
The only remaining annoyance now is that little 3x3 squares icon "show/hide the new tab page" which comes on the right of every new tab page: clicking "show" brings in the page a number of miniature pages which I had formerly visited but do not need anymore.
Clicking on any of these brings it in the same tab page, but closing that tab and calling for a new tab brings the same group of page miniatures again.
I'd like to get rid of this... Any solution?
I'

Similar Messages

How much RAM do tab groups use (on average)? Do I need to watch out for how many groups I create?

I may have gone overboard in the creation of Tab Groups. I say this because now my system is beginning to act a bit sluggish. I created 7 groups, two of which have 9 or 10 tabs. Should I pull back on the number of groups I create (as well as how many tab are located within each group). That is: How much RAM do tab groups use. How can I calibrate or understand the trade off between these markers and the amount of RAM they use?

You can see the memory usage on the about:memory page.
You can open about: pages via the location bar like you open a website.

SCCM Windows Updates - Issue - Sent to whole network rather than just group

Hi, i have successfully configured a small amount of Office Updates following this link:
http://www.windows-noob.com/forums/index.php?/topic/4467-using-sccm-2012-in-a-lab-part-6-deploying-software-updates/
Now, the issue i have that it seems to have gone to the whole network rather than the group that i created. I am not sure how this is possible. Its not a major issue as the updates were required, but how did this happen? New to SCCM!
SCCM 2012 R2
Thanks

as @dekac99 says, which collection did you target the deployment to?
Step 4 of
http://www.windows-noob.com/forums/index.php?/topic/4467-using-sccm-2012-in-a-lab-part-6-deploying-software-updates shows;
- select the SUG you created
- click Deploy
- target the All Windows 7 Computers collection.....
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How do I save Tab Group that i have created? So that everytime I open Firefox, it will be there for me rather than I have to re-create again.

I have homepage with multiple sites. I like you Tab Groups which enable me to group those sites under particular group. However, I found that the group were gone when i close and open back Firefox.

You can open it back in "about:home" just click "Restore Previous Session" and you will get your group tab back.

How to make individual tabs on a JTabbedPane, a different colour?

Hi,
Is there a way to set the background colour to INDIVIDUAL tabs on a tabbed pane so that I can have a nice range of colours across my tabs?
DLawton.

hey D,
I've got two ideas for you:
1. Swing has implementable L&F (skins) for all components. You could create one for you JTabbedPane as a subclass from some existing UI L&F
2. you can always do this in your paint method. Might be tough though

Can i share existing albums of photos from my photo library with friends straight to icloud rather than having to create a new shared folder and then select the individual photos rather than a whole album??

Ok to clarify -
1. i want to go into my photos on my iphone 6.
2. create a new folder in shared folders.
3. Add an entire album of photos from my photo library rather than having to select individual photos.
4. Share with friends.
Surely the reason i have saved certain photos into albums already from my mac means i like the selection already. So i would like to just share the whole album rather than having to select all the individual photos from the album. Ive tried but maybe im being a doofus and missing something??????
Any help would be most appreciated.
thank you in advance
Kris

This is normal and is how Apple handles photos.
There are NOT duplicate photos.
Just as a song is in your itunes library and you can access that exact same song from a playlist, all photos synced to iphone are in the photo library and those exact same photos (NOT duplicates) can be accessed from the individual albums.
It is working exactly as it should.

How do I organise tab groups automatically?

I've got around 30 tab groups with a total of around 100 windows(tabs) spread among them.
Right now all my tab groups just go where they want. Is there a 'tile tab groups' option or even an addon would be good.
It would be best if they sorted themselves out alphabetically rather than having me move them all around, it freezes FF for upto a minute when I move a single tab... I think it's because I have so many they all try to move and resize when one gets dropped in the middle of them

Which boxes are currently ticked in Clear Recent History?
*Tools > Options > Privacy : History: [X] Clear history when Firefox closes > Settings
Clear Recent History is not enabled by default, so if it is now then you or an extension did enable that.<br />
If you want to keep using it then you only need to make sure that the "Browsing History" don't have a tick to prevent App Tabs from being removed (App Tabs are considered as history because you visit sites).

How can I disable tab groups?

Please tell me how to disable tab groups? I don't want this feature, I'd like to return to old individual tabs, which are not hiding

Don't use them. If you have created a tab group then delete that group.
*https://support.mozilla.com/kb/what-are-tab-groups

How to print Cell Formula rather than its Result?

Hi,
I work with data that includes lots of multiple fractions, and print reports showing results of various calculations based on the fractions. The fractions themselves can be important, so I need to be able to display them when used in a formula.
For example, in one cell (cell A1) I need to enter "1/3 * 13/21"; I need to display this formula when I print. Cell A2 would contain a specific number, like "141.5". Cell A3 needs to calculate A1 * A2.
In order to provide a number that A3 can use, I need to enter "=1/3 * 13/21", but when printing this displays "206349". I can format A1 as text, but then A3 won't calculate it. I tried using "Value(A1)*Value(A2)" in A3, but it looks like Value will only accept a decimal number.
So, is there any way to format some cells in a sheet (but not all cells) to display the cell contents rather than the result? Or a way to enter a fraction as text and have another cell evaluate the fraction or formula?
Thanks for any help or advice.
Tom

Yvan,
Merci for the reply.
Unfortunately, that option does not work for my purposes. Below is a row that Numbers will allow me to print.
0.07968198 | 1/6 | 23.58333 | 0.01463667 | 0.03333333 | 141.500
Next is the row as I desire to print it (but have not figured out how to print):
1/5 - (80/141.5 * 1/5) - (5.125/141.5 * 1/5) | 1/6 | 23.58333 | 0.01463667 | 0.03333333 | 141.500
Next is the row as it appears if I follow your suggestion:
=1/5 - (80/141.5 * 1/5) - (5.125/141.5 * 1/5) | =1/6 | =ROUND(D41*H41,5) | =ROUND(G41*H41/322.25,8) | =ROUND(C41*D41,8) | 141.5
So in other words, I only want the first cell in the row to print as text. My clients need to see the equation in the first cell, not its calculated result. But for each following cell, they need to see the result; if I print the functions and cell references, as in the 3rd example, my report won't make any sense at all to my clients.
Quattro Pro on Windows allowed me to do this easily. I switched to Mac and Excel 2008, and found a difficult workaround solution to accomplish this; but Excel is a dog of a program, with many bugs still. I'd much prefer to work with Numbers, but unless I can do something about the printing issue, I'll have to stick with Excel, or run Quattro under VMWare Fusion.
Thanks a lot,
Tom

How to use a constant rather than a "getter"?

I'd like to refer to a constant rather than a property using a "getter" (accessor), but I'm not sure how.
For example:
<f:selectItem itemLabel="Option1" itemValue="#{Constants.MINIMUM}"/>
But of course this results in trying to call getMINIMUM(), which isn't what I'm trying to so.
Any ideas?

hi ,
as far i know u cannot access a variable unless using a getter method !!
Viel spasss...

How do I change tab group order?

I have 3 tab groups. From tab group 1, when I press ---Ctrl + `---, it goes to tab group 2. From tab group 1, when I press ---Ctrl + Shft + `--- it goes to tab group 3. How do I change the order so that when I press ---Ctrl + `--- from tab group 1 it goes to tab group 3 and when I press ---Ctrl + Shft + `--- from tab group 1 it goes to tab group 2? Basically, I would like to change the order of tab groups that the keyboard shortcut goes through.
Thank you.

Heard about Tab Groups? They organize your tabs, eliminating clutter. Try it http://mzl.la/d21MyY

How do I **save** tab groups (or import/export them)?

I needed to restart FF5 after installing some add-ons and when FF restarted, I was dismayed to find that my tab groups were gone!
Is there a way to save my tab groups so that I can reload them after restarting FF? it would be better if FF simply "remembers" what tab groups were created and reinstated them after a restart.
I LOVE tab groups as a way to organize all of the myriad tabs I fins myself opening as I venture off on a quest for knowledge. TG's can be made even better if there was a way to save, export, and import them (IMHO).

I finally found out how to save my tabgroups! :) Simple, you have to choose exit in archive and NOT press the closebutton (X) up in the corner. Simsalabim, all the groups remains!! :D
It's simple once you know the answer...
Greetings from Jessica, Sweden.

How do I SAVE tab groups. They have disappeared when I next open Firefox

I created 5 tab groups. it was great flicking between them but I closed my machine and when I opened again they had gone.
How do I save them please or stop them disappearing
Thanks
pingu70

Which boxes are currently ticked in Clear Recent History?
*Tools > Options > Privacy : History: [X] Clear history when Firefox closes > Settings
Clear Recent History is not enabled by default, so if it is now then you or an extension did enable that.<br />
If you want to keep using it then you only need to make sure that the "Browsing History" don't have a tick to prevent App Tabs from being removed (App Tabs are considered as history because you visit sites).

Shake exports 1,100 individual frames rather than a Quicktime movie

I'm stumped. I rendered a file-out node that was set to Quicktime format and 720p60 codec and I ended up with 1,101 individual Quicktime files, or frames, I guess, rather than a single file, a Quicktime movie that was 1,101 frames long. I've done the same thing many times before, and have always ended up with a Quicktime movie that I could import back into Shake to continue with some more rotoscoping.
Each "file" is 240 kb in size, though when I open them in Quicktime, there seems to be no image there. Just a blank white screen.
Has this happened to anybody else? I cannot see that I have changed anything in my usual workflow settings.
Any advice most appreciated,
Jim

FYI:
http://discussions.apple.com/help.jspa#answers
Patrick

How can I recover tab groups if I accidentally hit "X" instead of "Exit"?

Hello,
I had about six tab groups open with a total of 100+ tabs and accidentally clicked on the "X" at the top-right (I'm running Windows 7). The entire program closed without warning me that I was closing multiple tabs. When I restarted the program, only my most recent tab group was restored; the rest are gone. As you can imagine, I really want to get the rest of my tabs back.
How can I restore the rest of the tab groups?
Also, how can I make sure that one of following things happens?:
- Disable the "X" button
- Replace the action of the "X" button with the "Exit" function, such that if I accidentally click the "X", Firefox will exit and save all my tabs for the next session
- Enable the warning about closing multiple tabs, before the tabs are all closed
Thank you for your help!

Thank you for the response, cor-el. Yes, I did look in recently closed tabs and windows. However, the recently closed windows section did not contain the tab groups that I had open previously (it only had two pop-up ads which I was not looking for), and the the recently closed tabs section only contained tabs from one of the tab groups.
All of the "restore from last time" and "warn before closing" options were enabled prior to my accidental close-out, but neither option is working as it should.

How to retreive individual tabs rather than tabs group

Similar Messages

Maybe you are looking for