How to retreive the dynamic file name in the AAE configuration?
Hi Guys,
I have configured File to File with the integrated configuration and in the mapping i need to retreive the file name dynamically and i am unable to retreive it from the run time in AAE configuration. I am able to retreive with the normal configuration where integration engine is the run time.
I am using the code as below. Is it possible to retreive the file name dynamically in the AAE configuration? any help or suggestions would be appreciated.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Thanks,
Srini
Hello Srinivas,
Brief Solution:
1. Using dynamic configuration, set the attribute value of payload dynamically to ASMA
2. Using AF module, write the value of ASMA in a variable
3. Using the variable substitution, set the receiver file name schema
Plz go through the below link:
http://wiki.sdn.sap.com/wiki/display/XI/CombiningthreedifferentaspectsofPIinoneshot
Thanks,
Satya Kumar
Similar Messages
-
How to give a dynamic File Name for Receiver File/FTP Adapter.
Hi Experts,
I have one scenario in which we are creating a flat file of IDOC which is coming from R/3 & sending it to FTP location. For this we have configured Receiver FTP adapter with File Name Scheme as "NT.out" & in File Consturction mode i have given as "Add Time Stamp".
therfore while creating a file it is creating as NTyyyyMMdd-HHmmss-SSS.out
where as my requirement is only to to add Time & not the Date. (NThhmmss.out)
How to do this ?
for your info we are using ABAP Mapping.
Pl help me
Regards,
UmeshHi Umesh,
Add one more field to your target structure for your file name and populate that field as per your requirement like NTyyyyMMdd.out. In receiver communication channel use Variable subtiution option and give the refrence of Payload and file construction mode set as create.
And refer the below weblogs for Variable Subtiutuion File Name Scheme
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
Hope this way would be solve u r problem.
Cheers
Veera
>>>Reward points, if it is needful -
Dynamic File Name depending on the Source File name
Hi Experts,
I have a problem like Dynamic File name depending on the Source File Name. I will explain with example as follwos
Source File name Targer Folder/Filename
NK01.VR59.L2007030 VR59/Rec.l200
NK01.VR71.L2017030 VR71/Rec.l201
NK01.VR77.L2027030 VR77/Rec.l202
See above the exaple, Depending on the Source file name, I am deciding where i need to place my file and what name i need to name it.
So please suggest me the solution and How can i do this with a single communication channel ? Do i need to create multiple CC for each folder??
Points will be rewarded for Valuable anwer.
Thanks in Advance,
Best Regads,
VijayHi VIjay,
Thanks for quick reply. But i am getting error in End to End Scenarios only. If i remove the Return " " statement from the UDF, while activating it is showing the error saying like missing return statement. I also mapped to the top most node to this UDF.
I am getting the following error in End to End error Scenarios:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_Target_File_determined_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
<SAP:P3>Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>During the application mapping com/sap/xi/tf/_MM_Target_File_determined_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: Fatal Error: com.sap.engine.lib.xml.parser.Parser~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error> -
How to handle Dynamic File Name
Hello All,
I have a requirement, I have to download a file from application server to my ABAP program which will be executed in the background. The problem is the file name is a dynamic file name with timestamp on it. So how do I read the file from the application server. I know there are certain function modules but I don't think so that they can work in background.
So If anyone has worked on it before your reply would be helpful.
Thanks and Regards,
SushilHi,
Use this funcation module this will return you the list of files in a directory...
It will work even in back group processing also..
SUBST_GET_FILE_LIST
or if it is unix environ ment.
data: begin of t_tabl occurs 0,
line(132),
end of t_tabl,
data: lc_command(100) type c.
Get all the file name falling under specified directory...
lc_command(3) = 'ls '.
lc_command+3(45) = p_dir. " Directory of file path
call 'SYSTEM' id 'COMMAND' field lc_command
id 'TAB' field t_tabl-sys.
Check any files exits in the directory.......................
if t_tabl[] is initial.
message e006 with 'No files exist in the specified directory ' p_dir.
endif.
here you will have all the file names in t_tab1 you can sort by name and will get the latest file in order..
Thanks
Mahesh
Message was edited by:
I Can Solve It -
Dynamic file name of the attachment in receiver mail adapter
Hi
I have configured a receiver mail adapter which receives the payload as an xml attachment.
Right now the file name of the attachment is hardcoded to "invoice.xml".
I want to set it to dynamic ie. instead of "invoice.xml"... i want it as "invoice<invoicenumber>.xml".
Invoice number is present in the payload.
please suggest a solution w/o the need to develop a custom adapter module.
Thanks!
Regards,
Faria MithaniHi,
Go through this thread..
Dynamic File Name for Receiver File Adapter
Regards,
Sarvesh -
Dynamic file name inside the ZIP file
Hi Experts,
I have done proxy to file scenario, reciever side is the file ZIP file, i have done successfully done Zip file using adapter modules in Communication Channel.
The file name is hard coded like this.
contentType-----Transform.ContentType--
text/plain;charset="UTF-8";name="Billing.txt"
Is there any possible to do dynamic file name instead of hardcoded like add time stamp.
Kind Regards,
Praveen.hi,
you can always do it using an adapter module like shown in my blog:
/people/michal.krawczyk2/blog/2006/02/23/xi-dynamic-name-in-the-mail-attachment--pseudo-variable-substitution
Regards,
Michal Krawczyk -
Dynamic File name in File Adapter
Hi,
I have a requirement to pass dynamic file name in File Adapter.
Is there any way to pass a variable for the file name attribut in file adapter.
I am looking for some options apart from %yyMMddHHmmss%,%SEQ%...etc
Please suggest if any of you have information on how to put values from a variable to file name attribute in file adapter
regards
SaijuHi Saiju,
Yes there is.
Assign your file name to a variable, let's say 'fileName'.
Now go to your invoke activity(for the specific fileadapter) -> Property tab-> find a property call jca.file.FileName -> in the value field assign 'fileName' variable.
That's it... (assuming you are using 11g)
Arik
Edited by: Arik on Jun 27, 2012 3:12 PM -
Dynamic file names in outbound file adapter
I have to configure a flow in XI system wich takes an input file from one machine and after mapping process leaves the output file in target machine with the same name of input file.
Name of input file won't be always the same (*.dat) so i cannot hardcode this name in outbound file adapter.
Does anyone know how to transfer input filename from inbound file adapter to XI message and then to outbound file adapter?
I know there is an option to create dynamic file names in file adapter but i think it isn't enought to solve my problem.I have to configure a flow in XI system wich takes an input file from one machine and after mapping process leaves the output file in target machine with the same name of input file.
Name of input file won't be always the same (*.dat) so i cannot hardcode this name in outbound file adapter.
Does anyone know how to transfer input filename from inbound file adapter to XI message and then to outbound file adapter?
I know there is an option to create dynamic file names in file adapter but i think it isn't enought to solve my problem. -
Dynamic file name from messsage payload
Hi Friends,
My requirement is to read one .xml file , which has Purchase Order deatails and place .html file on receiver side, we are using XSLT for mapping.
The file name should be "POnumber.html " , i've gone through below but couldn't get much
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/content.htm
Can any one send the that code , and steps to add that code in side XSLT.
Thanks
JohnHi,
With above links
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
See in the below Michal blog , how to conver the file as html , take that part only.
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
Regards
Chilla -
Dynamic file name(Context)
Hello All,
I am using Dynamic file name function in my message mapping. Below is the code that I am using inside UDF:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String fileName = conf.get(key);
return fileName;
Now the questions is as per my requirement, I need to generate multiple file names. Can some one help me how can change the above code for catering multiple returns
Thanks
Regards
MoorthyHello,
Now the questions is as per my requirement, I need to generate multiple file names. Can some one help me how can change the above code for catering multiple returns
If you are using multi-mapping (0..n), only one will be accessed. See link below from SAP Help
http://help.sap.com/saphelp_nw70/helpdata/EN/43/09b16006526e72e10000000a422035/frameset.htm
Or you can use variable substitution for filename generation (search in SDN).
Hope this helps,
Mark -
Dynamic file name in communication channel
hello
is it possible to give in the communication channel, under the 'File Access Parameters', a dynamic file name?
to get it out of a table or something?
Thanks
KfirHi,
Yes its bit possible to use the dynamic file name at File access paramters
The dynamic filename generation concept is as follows.
In your filename field. just give a variable with % symbols. (eg: %file% ).
Now, under the option Variable Name Substitution, you can give how the value has to be created.
It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
For the former, your give
message:interface_name ,etc
and for the payload part you give,
Payload: "your element root which u wanna acecss"
Just check this link out,
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
And read the contents under variable substitution and it will help you understand the concepts better.
If you have any clarifications, do get back,
Refer below links for more in depth details about it
Re: Dynamic file name in Receiver File Adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/frameset.htm
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
/people/sap.user72/blog/2005/10/01/xi-new-features-in-sp14
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
/people/michal.krawczyk2/blog/2006/02/23/xi-dynamic-name-in-the-mail-attachment--pseudo-variable-substitution
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
Check out this URL
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
Check these weblogs as well...
/people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12
/people/sameer.shadab/blog/2005/09/23/an-interesting-usage-of-variable-substitution-in-xi
Thanks
Swarup -
Dynamic File Name on Receiver Side using XSLT mapping
Hi,
My scenario is a Proxy to File scenario.The File on the receiving side is a TEXT file generated due to XSLT mapping. The file name has to be dynamic like- TEST<DDMMYYHHMMSS>File.DAT.
If somebody knows how to do the same please help.
Regards
RituHi Ritu,
I agree to Krishna.With your XSLT mapping create a XML output which can be converted to a text file with content conversion.
And for the dynamic file name, i guess its the date that matters which needs to be in DDMMYYHHMMSS format. the same can be accomplished by a Java function and calling it in your XSLT .
Do refer this weblog it will help you accomplish the same.
>>> /people/pooja.pandey/blog/2005/06/27/xslt-mapping-with-java-enhancement-for-beginners
Regards,
Shabarish -
Hi everyone.
I want to know how export oracle tables with dynamic file name on windows XP platform.
bye.You'd have to generate the export command-line or par file using a script -- Windows or SQL !
It would be easy to use SQL to generate the script.
So you could have a BATch file that
a. Calls the SQL to generate the export command-line or parfile
b. Executes the export
even possibly run in a loop.
Hemant K Chitale -
Dynamic file name while sending to target FTP
Hi Experts,
we have a scenario wherein we are trying to implement dynamic file names.
The scenario is IDOC to file, and we need to append the data corresponding to all the IDOC triggered n a daily basis.
Its like the file abc_01will contain data for day 1(data of oll the IDOC in that day).For day to we need to dynamically name the file as abc_02 and so on.
But before naming the file as abc_02 we need to check if abc01 is present or not .If abc_01 is not present then for day 2 file we need to give the name as abc_01 and so on_.This condition is need to be checked becasue there may be the case that a file may not be picked by the script running at the target system.
can anyone let me know how to check whether file are correctly picked at target.
Regards,
srinivas.Hi Srinivas,
I think you can achieve this with the next scenario:
- For getting all the Idocs info, you need a ccBPM to collect them, and then, download them to a file.
- To dynamically put the filename, you need to use Dynamic Configuration at the File Receiver Adapter (in the Message Mapping, you can write a UDF.)
- And to check if the daily file exists, you can also write an UDF and then decide the name of the output file.
Hope this helps,
Regards,
Juan -
Hi,
The following syntax does not work:
<%@ include file="htmls/mydocs/<%=dynamicFileName%>.htm" %>
could you tell me how to include a dynamic file?
thanks,
peterzhuThe include directive <%@ include ... does not work with dynamic file names, because it is evaluated at compile time.
You have to use the include standard action <jsp:include page=... This is executed during runtime, and hence a dynamic file name can be used.
Maybe you are looking for
-
Can't find mails anymore after update from Tiger to Leopard
I've just updated my IMac from Tiger to Leopard (OSX 10.5.6). After opening the Mail program I just see the menu bar (no window for the postbox). When I open the postbox via the menu bar, the box is just empty. Are my mails gone? Where can I find or
-
Can't start 90% of my apps
Hey Guys, i need help. i dont know what is wrong with my ipad. i can't open a lot of apps on my ipad. i tried downloading any free apps or system restart, nothing works. i dont wanna restore my ipad. please help. im running ios 5.1.1, and it is jailb
-
As soon as I open Skype it crashes, I can't even get into my messages. I DO NOT have Citrix installed so that is not the issue. Faulting application name: Skype.exe, version: 7.6.80.105, time stamp: 0x559286cf Faulting module name: unknown, version:
-
Where is the default folder for internet explorer cache win 8.1
Hello all,I have a question about IE 11,,I have moved the cache folder in IE But I don't remember the orignal folder for win 8.1 was,,I see a caches folder in C:\Users\username\AppData\Local\Microsoft\Windows\,is that it?,and I was wondering is it an
-
Something's wrong with my Apple ID account, I'd tried accessing my card but it couldn't accept it. Before that I'd accidently bought the thing for nascar. When I'd tried updating an app, but it says, bill info alot, I'd tried accessing my card again,