How to retrieve bookmarks either from folders/Files or external drive

Hello Mozilla,
I have looked up your FAQ and Hidden Folder and File Mozilla Support Forum and Community areas to try and search for my past Bookmarks that were on a previous laptop. I had the data backed up to my Passport external drive and transferred to another laptop, since then, that too went down and so I am looking to see if Mozilla may have a way of getting back these files either from the Passport or 'other' means.
I did not Sync my bookmarks at that time, I have now and have looked into the Windows Hidden Folders and Files with no luck in finding these Bookmarks which are substantial.
Any other areas and or steps that I may have missed/have not taken as I am on Windows 8 (HELP-anyway)
Resources searched:
https://support.mozilla.org/en-US/questions/952646?esab=a&as=aaq
http://kb.mozillazine.org/Show_hidden_files_and_folders
http://www.mozilla.org/en-US/firefox/new/
I have even searched the hidden folders and files in My Computer and see information going back to September 2011, June 2012 and June 2013. if I am able to pull this data up, what steps am I missing in retrieving the old Bookmarks or have I lost them forever?
Any suggestions are greatly appreciated.
Ronald

One way could be the following two-step approach:
# create an HTML copy of the backed-up bookmarks - or from some other browser you may have been using in the mean time
# import the HTML file as suggested here: [[Import Bookmarks from a HTML file]]
Let us know, if it helped

Similar Messages

How do I keep iTunes from indexing files on external drive?

Hi,
I did a clean install of Vista from XP. I used Windows Easy Transfer to restore my As part of the upgrade, I did a fresh install of iTunes 8. I think I was running 7 before but this may not be significant, and I may be mistaken.
iTunes automatically (?) indexed all MP3 and m4a files both on my C: drive and on my external drive. These files are largely duplicates; I only want my music on C: to be indexed by iTunes. I've searched and searched here, Help and with Google, have found some very good information about moving files to another drive, but haven't managed to find a way to limit the drive that iTunes looks at. (I have 3 external drives but only the one has music files on it.) Any help would be greatly appreciated.
tim

Chris CA wrote:
By default, iTunes copies the music into /My Music/iTunes/iTunes music folder.
Yes, but I don't use the default.
iTunes does not move files from their original location. It copies them to the iTunes music folder when they are added to the library.
I'm pretty sure mine does not copy them; it creates pointers to them in their original locations. I believe this is an available option to the default.
If they are not showing up in iTunes and they are not in the iTunes music folder shown in iTunes prefs -> Advanced - iTunes music folder location, then you are good to go.
Then I'm good to go. I've got 2800 tracks in my iTunes music folder, plus another 6000 elsewhere on my C: drive, all of which are correctly listed in iTunes. (There also a bunch of WMAs which, for these purposes, don't exist). None of the ones from my J: drive are listed in iTunes and none have been copied to the iTunes music folder. Thanks again for your help.

How to send the data from mac pc to External drive

how to send the data from mac pc to External HDD
or Pen Drive but with out deleting the preview as data

You can use "Finder", which is in your dock, to copy files from your iMac folders over to the external hard drive.
Hope this helps

How do I Move Events from an Internal to External drive?

Hello,
I am trying to move events on my internal drive to my new external drive. Everything is set up and I see the external drive, but after reading other posts and replies it seems I can't just move the files from the internal to external drive by dragging and dropping using finder.
Can anyone give some guidance on how I do this so i don't have to reload all my videos on the external drive.
Also, when they are moved over, will i see the external drive when I open iMovie, or do I ahve to do something to see it in my Events Library.
Any help be be appreciated.

Can anyone give some guidance on how I do this so i don't have to reload all my videos on the external drive.
Best approach is to import files directly to the external drive during the initial import process by selecting the appropriate drive in the import window. However, for Events already stores, here is A QUICKIE VIDEO TUTORIAL.
Also, when they are moved over, will i see the external drive when I open iMovie, or do I ahve to do something to see it in my Events Library.
You must activate the "external drive" icon in iMovie '08 to make your external drives visible in the Event Library list. (I.e. Press the icon to the right of the "Event Library" title and to the left of the actual Event Window.) Sorry, answered your e-mail message before seeing the second question here.

How to recover iTunes library from Time Machine on external drive

Dear Forumers,
I was not able to solve this problem, hence I decided to open this discussion.
Recently, I clean installed Yosemite so my new Mac is completely empty.
I have my time machine backup on my eternal hard drive and would like to restore only specific things - such as iTunes library.
How do I do it?
I can locate the iTunes app in the backup file in the external drive but that is just the app - I still don't know how to recover my playlists and songs.
Moreover, I do not have those songs in the Mac - previously they were in a separate organised folder created by me (inside the "music" folder) and iTunes used it.
Does iTunes have a copied library of this all?
Or do I have to copy this folder into Mac and then manually reopen all the songs and sort them into playlists?
Any advice?
Thank you in advance.

See Pondini's TM FAQs, for details.

How do i import video from iPhone to an external drive

I have a lot of video clips on my iPhone. I like to export them to an external drive. I don't want to create an new iPhoto libraries. I just want to move the video clips from my IPhone, such that later I can import selected one's to iMovie. Once the clips are imported to an external drive, how do I delete them from the iPhone. I don't want to have to delete them one at a time!
thanks
Hal

Hi Halle,
Connect the iPhone to your Mac using the USB/Lightning charge cable. Open the Apple provided app "Image Capture" (it should be in your Applications folder). Image Capture should recognise the iPhone as a connected device and create thumbnails for each video clip and photo. To select everything (including photos) click on Edit>Select All in the Menu. If you only want to import the videos you will need to click (or Command>Click or Shift>Click) on the video clips in order to select them. Then select Import at the bottom right of the viewer. But before that step, at the bottom left, you need to select Import to: Other (from the pop-up menu) then navigate to your connected external drive. All the selected videos will be copied to that drive.
To delete all the videos from the iPhone, there is no quick way of doing this, as far as I'm aware. But to speed up the process, firstly select the Videos album in the Photos folder, then press on Select at the top right of the screen. You can now touch each video clip to invoke a tick mark (circled in blue). Once you have selected all the clips you wish to delete, simply touch the Trash icon at the bottom right. You may also be able to delete the clips when syncing the iPhone with iTunes, but I haven't tried this.
John

How can I prevent Applications from being copied to external drive?

Hello,
Just a quick one...
I run a studio in an education evironment. We've got quite a lot of software installed on our machines (Mac OS X 10.7.4) and there's always the chance that students will copy applications from the Applications folder onto an external drive to take home!
Obviously this is becoming increasingly easy with large USB sticks and Applications which are entirely contained in the Applications folder.
Is there any way that students can still run these applications during class but prevent them from copying the whole applications?
With thanks in advance,
Lawrence

You can hide the Applications folder, but it isn't a total solution. Open Terminal and type:
cd /
sudo chflags hidden /Applications

How do I capture footage from camera to an external drive using a macbook

i'm trying to use my external drive to store my project because otherwise i don't have enough memory. however, there is i think only one firewire port on my macbook. if i connect the camera directly to the external drive it doesn't seem like fce can find it in easy set up. how do i connect my macbook, camera, and external drive so that i can work off my external drive? anyone?

I have the same query with my macbook which only has 1 firewire 400 port.
I haven't bought an external drive yet, but want to buy the one that has the right connections.
After you connect the camera to the ext. hard drive what connection do you use between hard drive and macbook? Ethernet?
Also, any recommended hard drives, I've heard Lacie are a good one but which model?
Thanks in advance.

How to retrieve print settings from .rpt file?

I have crystal reports 10 report file, in which I edited the printer settings... collate and number of copies(2) and saved it.
now i want to print it from VB6. I am using a customized print dialog form (not using the common dialog control)
I want to get the collate and number of copies settings from the rpt file. how can I get those details. any API available?

Hi Samkar,
It will look something like this:
crReport.SelectPrinter "pscript5.dll", "HP LaserJet 8150 Series PS", "LPT1"
crReport.PaperOrientation = crPO
crReport.PaperSize = crPSS
crReport.PaperSource = crPSR
crReport.PrinterDuplex = crPRDPDefault
crReport.PaperSource = crPRBinEnvelope
Depending on the version you have depends on if the function is available. It may be that 10 did not h ave the Papersource member.
Thanks again
Don

How can I prevent iTunes from copying files to C drive?

I keep all my music files on my D drive. When I installed iTunes, I made sure that each song title in the library was linked to the mp3 on the D drive. Recently I found about 155 music files that are now duplicated in a folder on my C drive named "iTunes music" Most the file modification dates are either 9/11/2010 or 10/25/2010. I tried to think of any action I've taken that might have caused this. The only unusual thing I've done recently with iTunes is try out a new accessory called TuneUp. I've used it to find album art and find details about some songs that were missing, like what album the file came from etc. Is it possible that TuneUp is creating new modified versions of the music files rather than applying the updated data to the original files on the D drive?

That sounds like a good guess.
I know nothing about TuneUp or how it works, and I can't recall where iTunes keeps it's Artwork, but they may very well be related.
Is your settings in iTunes for copying files/where they are stored correct? Perhaps installing the 3rd party application made a change to your settings.
Try tracing back one of the files to your library and see if you can identify an action you took that created the files. For example... look at one of these suspect files and find it in the iTunes library. Sort your music by Date Added and see if you can find a correlation.

How to retrieve multiple data from table and represent it in jsp page

Hi
The below JavaScript code is used to add row in the table when I want to add multiple row data into table for single entry no field.
<html> function addRow()
            i++;
            var newRow = document.all("tblGrid").insertRow();
            var oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='srno"+i+"' type='text' id='srno"+i+"' size=10>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='itmcd"+i+"' type='text' id='itmcd"+i+"' size='10'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='itmnm"+i+"' type='text' id='itmnm"+i+"' size='15'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='indentqty"+i+"' type='text' id='indentqty"+i+"' size='10'>";
            oCell = newRow.insertCell();
                oCell.innerHTML = "<input name='uom"+i+"' type='text' id='uom"+i+"' size='10'><input type='hidden' name='mcode"+i+"'id='mcode"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='packqty"+i+"' type='text' id='packqty"+i+"' size='10'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='packuom"+i+"' type='text' id='packuom"+i+"' size='10'><input type='hidden' name='pack"+i+"' id='pack"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='rate"+i+"' type='text' id='rate"+i+"' size='10'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='dor"+i+"' type='text' id='dor"+i+"' size='0' onClick='"+putdate(this.name)+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='bccode"+i+"' type='text' id='bccode"+i+"' size='10'></td><input type='hidden' name='bcc"+i+"' id='bcc"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='cccode"+i+"' type='text' id='cccode"+i+"' size='10'></td><input type='hidden' name='ccc"+i+"' id='ccc"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='remark2"+i+"' type='text' id='remark2"+i+"' size='20'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input type='button' value='Delete' onclick='removeRow(this);' />";
           // oCell = newRow.insertCell();
           // oCell.innerHTML = "<input type='button' value='Clear' onclick='clearRow(this);' />";
        }<html> Then this data are send to the next Servlet for adding into two table.
My header portion data are added into one table which added only one row in table. while footer section data are added into the no of rows in another table dependent on No. of
Rows added into jsp page.
Here is an code for that logic.
<html>
ArrayList<String> mucode = new ArrayList<String>();
                            ArrayList<Integer> serials = new ArrayList<Integer>();
                            ArrayList<Integer> apxrate = new ArrayList<Integer>();
                            ArrayList<Integer> srname = new ArrayList<Integer>();
                            ArrayList<String> itcode = new ArrayList<String>();
                            ArrayList<String> itname = new ArrayList<String>();
                            ArrayList<Integer> iqnty = new ArrayList<Integer>();
                            ArrayList<String> iuom = new ArrayList<String>();
                            ArrayList<Integer> pqnty = new ArrayList<Integer>();
                            ArrayList<String> puom1 = new ArrayList<String>();
                           ArrayList<Integer> arate = new ArrayList<Integer>();
                            ArrayList<String> rdate = new ArrayList<String>();
                            ArrayList<String> bcs = new ArrayList<String>();
                            ArrayList<String> ccs = new ArrayList<String>();
                            ArrayList<String> remarkss = new ArrayList<String>();
                            //ArrayList<Integer> qtyrecs = new ArrayList<Integer>();
                            //ArrayList<String> dors = new ArrayList<String>();
                            //ArrayList<String> remarks = new ArrayList<String>();
                 String entryn = request.getParameter("entryno");
                    String rows = request.getParameter("rows");
                    out.println(rows);
                    //String Entryno = request.getParameter("entryno");
                   // out.println(Entryno);
                  int entryno = 0,reqqty = 0,srno = 0,deprequest = 0,rowcount = 0;
                            if(!Entryno.equals("")){
                                    entryno = Integer.valueOf(Entryno);
                            if(!rows.equals("")){
                                    rowcount = Integer.valueOf(rows);
                           for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("srno"+i)!=null){
                                            serials.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
                                            out.println(serials.size());
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("srno"+i)!=null){
                                            srname.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
                            out.println(srname.get(0));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("itmcd"+i)!=null){
                                            itcode.add(request.getParameter("itmcd"+i).trim());
                                    } //out.println(itcode.get(i));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("itmnm"+i)!=null){
                                            itname.add(request.getParameter("itmnm"+i).trim());
                                    }//out.println(itname.get(i));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("indentqty"+i)!=null){
                                            iqnty.add(Integer.valueOf(request.getParameter("indentqty"+i).trim()));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("uom"+i)!=null){
                                            iuom.add(request.getParameter("uom"+i).trim());
                                    }//out.println(iuom.get(i));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("mcode"+i)!=null){
                                            mucode.add(request.getParameter("mcode"+i).trim());
                           for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("packqty"+i).equals("")){
                                      pqnty.add(0);
                                    }else
                                        pqnty.add(Integer.valueOf(request.getParameter("packqty"+i).trim()));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("pack"+i)!=null){
                                            puom1.add(request.getParameter("pack"+i).trim());
                                   }else
                                    puom1.add("");
                           for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("rate"+i).equals("")){
                                        arate.add(0);
                                    }else
                                    arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
                 /* for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("rate"+i)!=null){
                                            arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
                          for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("dor"+i)!=null){
                                            try{
                                                    rdate.add(dashdate.format(slashdate.parse(request.getParameter("dor"+i).trim())));
                                            }catch(ParseException p){p.printStackTrace();}
                                    }else
                                       { rdate.add("");}
                               for(int i=1;i<=rowcount;i++){
                             if(request.getParameter("bcc"+i)!=null){
                                            bcs.add(request.getParameter("bcc"+i).trim());
                                    }out.println(bcs.get(0));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("ccc"+i)!=null){
                                            ccs.add(request.getParameter("ccc"+i).trim());
                                    }out.println(ccs.get(0));
                            for(int i=1;i<=rowcount;i++){
                                out.println("remark2");
                                    if(request.getParameter("remark2"+i)!=null){
                                            remarkss.add(request.getParameter("remark2"+i).trim());
                                    }out.println(remarkss.get(0));
                    ArrayList<String> Idate = new ArrayList<String>();
                    for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("dateindent"+i)!=null){
                                            try{
                                                    Idate.add(dashdate.format(dashdate.parse(request.getParameter("dateindent"+i).trim())));
                                            }catch(ParseException p){p.printStackTrace();}
                String Rdate = dashdate.format(new java.util.Date());
                 String tdate = dashdate.format(new java.util.Date());
                 // String Indentdate = dashdate.format(new java.util.Date());
               // String ApprovedT1 = dashdate.format(new java.util.Date());
               // String ApprovedT2 = dashdate.format(new java.util.Date());
                   // String ApprovedT1=" ";
                    //String ApprovedT2="";*/
                String ApprovedT1= dashdate.format(new java.util.Date());
               out.println (ApprovedT1);
                  String ApprovedT2=dashdate.format(new java.util.Date());
                   out.println(ApprovedT2);
                String Indentdate=(dashdate.format(slashdate.parse(request.getParameter("dateindent").trim())));
                   out.println(Indentdate);
                    String Cocode ="BML001";
                    out.println(Cocode);
                    String Deptcode = request.getParameter("dept1");
                    out.println(Deptcode);
                    String Empcode = request.getParameter("emp");
                    out.println(Empcode);
                    String Refno =request.getParameter("rtype");
                     out.println(Refno);
                    String Divcode = request.getParameter("todiv1");
                    out.println(Divcode);
                    String Usercode = "CIRIUS";
                     String Whcode = request.getParameter("stor");
                    out.println(Whcode);
                    // String Itemgroupcode = request.getParameter("");
                     String Itemgroupcode ="120000";
                     out.println(Itemgroupcode);
                    String Supplytypecode = request.getParameter("stype");
                    out.println(Supplytypecode);
                    String Delcode = request.getParameter("deliverycode");
                    out.println(Delcode);
                    String Itemclass="WS";
                    out.println(Itemclass);
                    // String Itemclass = request.getParameter("iclass");
                   // out.println(Itemclass);
                    String unitcode = request.getParameter("uni");
                    out.println(unitcode);
                     String Todivcode = request.getParameter("todiv1");
                    out.println(Todivcode);
                    String Appxrate = request.getParameter("rate");
                    out.println(Appxrate);
                    String Srno = request.getParameter("srno");
                    out.println(Srno);
                /*    String Indqty = request.getParameter("indentqty");
                  out.println(Indqty);*/
              String Itemcode = request.getParameter("itmcd");
                   out.println(Itemcode);
                   String Othersp = request.getParameter("remark1");
                    out.println(Othersp);
                    String Reqdt = request.getParameter("dor");
                    out.println(Reqdt);
                    String Munitcode = request.getParameter("mcode");
                    out.println(Munitcode);
                    String Packqty = request.getParameter("packqty");
                    out.println(Packqty);
                    String Packuom = request.getParameter("pack");
                    out.println(Packuom);
                    String Remark2 = request.getParameter("remark2");
                    out.println(Remark2);
                    String BC = request.getParameter("bcc");
                    out.println(BC);
                    String CC = request.getParameter("ccc");
                    out.println(CC);
                    try{
                        st=connection.createStatement();
                        connection.setAutoCommit(false);
                        String sql="INSERT INTO PTXNINDHDR(COCODE,DEPTCODE,EMPCODE,APPROVEDT1,APPROVEDT2,INDDT,ENTRYNO,REFNO,REMARKS,DIVCODE,USERCODE,WHCODE,ITEMGROUPCODE,SUPTYPECODE,DELCODE,UNITCODE,TODIVCODE,ITEMCLASS)VALUES('"+Cocode+"','"+Deptcode+"','"+Empcode+"','"+ApprovedT1+"','"+ApprovedT2+"','"+Indentdate+"',"+Entryno+",'"+Refno+"','"+Othersp+"','"+Divcode+"','"+Usercode+"','"+Whcode+"','"+Itemgroupcode+"','"+Supplytypecode+"','"+Delcode+"','"+unitcode+"','"+Todivcode+"','"+Itemclass+"')";
                        out.println(sql);
                        st.addBatch(sql);
                        for(int i=0;i<serials.size();i++){
                            out.println("Inside the Statement");
                            String query3="test query for u";
                            out.println(query3);
                           String queryx="Insert into PTXNINDDTL(APXRATE,ENTRYNO,BRKNO,INDQTY,ITEMCODE,OTHERSPFCS,MUNITCODE,PACKQTY,PACKUOM,REMARKS,DIMSUBGRPCODE,DIMCODE,REQDT)VALUES("+arate.get(i)+","+entryno+","+srname.get(i)+","+iqnty.get(i)+","+itcode.get(i)+",'"+Othersp+"','"+mucode.get(i)+"',"+pqnty.get(i)+",'"+puom1.get(i)+"','"+remarkss.get(i)+"','"+bcs.get(i)+"','"+ccs.get(i)+"','"+rdate.get(i)+"')";
                           out.println(queryx);
                            st.addBatch(queryx);
                       int[] result=st.executeBatch();
                       connection.commit();
                       for(int k=0;k<result.length;k++)
                       out.println("rows updated by "+(k+1)+"insert sta:"+result[k]+"");
                    catch(BatchUpdateException bue)
                    out.println("error1;"+bue+"");
                    catch(SQLException sql)
                    out.println("error2;"+sql+"");
                    catch(Exception l)
                    out.println("error3;"+l+"");
</html>
   Now I looking for to retrieve this footer section data available in multiple rows from footer table and present it in jsp page .
I am finding difficulties in how to show this multiple row data for dynamic no of rows .i.e. variable no. of rows.
I have able to show the data in Header portions of page in this ways
here i am adding the part of code which shows the data from header part of table i.e from Header table
<html>
<h2 align="center"><b>Indent Preparation</b></h2>
    <div align="left">
        <table width="849" border="0" cellspacing="3" cellpadding="3" align="center">
            <tr>
                <td ><div align="left"><b>Indent No.</b></div></td>
                <td ><label>
                        <input name="indentno" type="text" id="indentno" size="15" value="" /><input type="hidden" name="no" id="no">
                </label></td>
                <td ><div align="center"><strong>Indent Date</strong></div></td>
                <td ><label>
                        <div align="center">
                            <input name="dateindent" type="text" id="dateindent"value="<%=date1%>"/><input type="hidden" name="no" id="no">
                        </div>
                </label></td>
                <td> </td>
                <td><div align="right"><strong>Entry No.</strong></div></td>
                 <%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
        <td><input type="text" value="<%=hdrcode.get(3)%>" size="10"></td>
<%}else{%>
               <td><input type="text" name="entryno" id="entryno" value="<%=entryNo%>"/></td>
                         <%}%>
                        <div align="right"></div>
            </tr>
            <tr>
                <td><b>Division</b></td>
                <%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(9)%>" size="20"</td>
<td><input type="hidden" name="div1" id="div1" value='<%=hdrcode.get(10)%>'></td>
<%}else{%>
               <td><input type="text" name="div" id="div" /></td>
               <td><input type="hidden" name="div1" id="div1" /> </td>
          <%}%>
                <td> </td>
                <td> </td>
                <td><div align="right"><strong>Unit</strong></div></td>
               <%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(14)%>" size="20"</td>
<td><input type="hidden" name="uni" id="uni" value='<%=hdrcode.get(12)%>'></td>
<%}else{%>
               <td><input type="text" name="unit" id="unit" /></td>
               <td><input type="hidden" name="uni" id="uni" /> </td>
          <%}%>
            </tr>
            <tr>
</html>
Any suggestion on any above works is highly appreciated.
Thanks and regards
harshal

Too much code. It's also not well intented nor formatted. I don't see a question either or it got lost in that heap of unformatted code.
I will only answer the question in the thread's subject:
How to retrieve multiple data from table and represent it in jsp pageTo retrieve, make use of HttpServletRequest#getParameterValues() and/or #getParameter().
To display, make use of JSTL's c:forEach.

My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard (via my MacBookPro), either from the HD or DVD drive. Can't get it to run Hardware Test. Disk Utility says disk OK - files are there. What can I do?

My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard. I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host. But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning. I can't get it to run Hardware Test - just get the white screen. If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?

Hi-NRG Bwoy wrote:
I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
Reet the SMC and the PRAM
 Cheat sheet to help diagnose and fix your Mac
Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
clean the disk.
If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
How to erase and install Snow Leopard 10.6

How do I prevent itunes from moving my music from its original place ie folders in an external drive when I play music from itunes. I have all my music in artist folders and separated by MPG3/MPG4 and FLAC folder within the artist folder.

How do I prevent itunes from moving my music from its original place ie folders in an external drive when I play music from itunes. I have all my music in artist folders and separated by MPG3/MPG4 and FLAC folders within the artist folder and itunes moves the track/s whenever i try and load selected music to my ipod/iphone. I've tried to find some sort of preference to prevent this, but no joy? What am I missing?

Try opening iTunes preferences. Then click on advanced tab. Then uncheck "Copy files to iTunes media folder when adding to library." By default, iTunes copies music to its own media folder when you use iTunes to play the music.

How to create Inbound Idoc from XML file-Need help urgently

Hi,
can any one tell how to create inbound Idoc from XML file.
we have xml file in application server Ex. /usr/INT/SMS/PAYTEXT.xml' we want to generate inbound idoc from this file.we are successfully able to generate outbound XML file from outbound Idoc by using the XML port. But not able to generate idoc from XML file by using we19 or we16.
Please let me know the process to trigger inbound Idoc with out using XI and any other components.
Thanks in advance
Dora Reddy

Hi .. Did either of you get a result on this?
My question is the same really .. I am testing with WE19 and it seems SAP cannot accept an XML inbound file as standard.
I see lots of mention of using a Function Module.
Am I correct in saying therefore that ABAP development is required to create a program to run the FM and process the idoc?
Or is there something tht can be done with Standard SAP?
Thanks
Lee

How to retrieve the values from a table if they differ in Unit of Measure

How to retrieve the values from a table if they differ in Unit of Measure?

If no data is read
- Insure that you use internal code in SELECT statement, check via SE16 desactivating conversion exit on table T006A. ([ref|http://help.sap.com/saphelp_nw70/helpdata/en/2a/fa0122493111d182b70000e829fbfe/frameset.htm])
If no quanity in result internal table
- There is no adqntp field in the internal table, so no quantity is copied in itab ([ref|http://help.sap.com /abapdocu_70/en/ABAPINTO_CLAUSE.htm#&ABAP_ALTERNATIVE_1@1@]).
- - Remove the CORRESPONDING, so quantity will fill the first field adqntp1. ([ref|http://help.sap.com/abapdocu_70/en/ABENOPEN_SQL_WA.htm])
- - Then loop at the internal table and move the quantity when necessary to the 2 other fields.
* Fill the internal table
SELECT msehi adqntp
INTO TABLE internal table
FROM lipso2
WHERE vbeln = wrk_doc1
    AND msehi IN ('KL','K15','MT').
* If required move the read quantity in the appropriate column.
LOOP AT internal_table ASSIGNING <fs>.
CASE <fs>-msehi.
    WHEN 'K15'.
      <fs>-adqnt2 = <fs>-adqnt1.
      CLEAR <fs>-adqnt1.
    WHEN 'MT'.
      <fs>-adqnt3 = <fs>-adqnt1.
      CLEAR <fs>-adqnt1.
ENDCASE.
ENDLOOP.
- You could also create another table with only fields msehi and adqntp and then collect ([ref|http://help.sap.com/abapdocu_70/en/ABAPCOLLECT.htm]) the data to another table.
Regards,
Raymond

How to retrieve bookmarks either from folders/Files or external drive

Similar Messages

Maybe you are looking for