How to retrieve data from virtual infotype?

Hi.
I'm trying to write an ABAP program that's retrieving data from infotype 2501.
If i'm looking at this table PA2501 from SE16, i can see that it's empty, but...
I have an HR program that's using the PNP and i can see in debbuging mode allot of data over there.
So, my question is: how can i get this data with a simple SELECT command? where is the data?
Thanks!
Barak.

There may be no data physically stored in table PA2501, it may reside in other tables but programatically pulled by the infotype into internal tables. Surender has given a good example, there are many more examples like some fields are stored in another table. Like for infotype 105, some fields are stored in PA0105 and some are stored in PA0106 which are pulled and displayed on one infotype screen i.e. 105 and hence we do not have a screen for 106. It may be same situation.
If you have to have a SELECT access, then only way is to debug the code and see how it is pulling the data, which tables etc.

Similar Messages

IDOC :: how to send data from Custom Infotype in SAP HR to third party

Hi,
I have created one custom Infotype by number 9020. How to send data from this infotype to third party system and also change pointers need to trigger for this infotype.
Please help me in doing it.
I am using one Custom Message type ZTALENT and Custom Idoc Type ZTALENT.
                                                                                ZTALENT                        Talent Management
5 E1PLOGI                        Header for an HR Object (Master Data or Organizational Data)
5 E1PITYP                        HR: Transported Infotypes and Subtypes for an Object
ZPUSER                         User base Data File
                ZPERSON                        Personal Information File Segment
                ZPOST                          Position File
                ZOPE                           Overall Performance
                ZPWORK                         Outside Work Experience
                ZPEDUC                         Education Details of Employee
                E1P0000                        HR: HR Master Record Infotype 0000 (Actions)
                E1P0001                        HR: HR Master Record Infotype 0001 (Org. Assignment)
                E1P0002                        HR: HR Master Record Infotype 0002 (Personal Data)
                E1P0016                        HR Master Record: Infotype 0016 (Contract Elements)
                E1P0022                        HR Master Record: Infotype 0022 (Education)
                E1P0023                        HR Master Record: Infotype 0023 (Other/Previous Employers)
                E1P0041                        HR Master Record: Infotype 0041 (Date Specifications)
                E1P0105                        HR: HR Master Record Infotype 0105 (Communications)
               ZE1P9020
                ZPLANG                         Language Details
                ZACTION                        Actions Changes
Regards,
Krishna

Hello Shankar,
         Technically TEMSE files are read by calling the following 3 function modules in sequence,
              1) RSTS_OPEN_RLC or RP_TS_OPEN: open the temse object
              2) RSTS_READ : read the object
              3) RSTS_CLOSE: close the object
Regards,
Rajesh

How to retrieve data from URL or querystring in bsp pages

hi
how to retrieve data from URL or querystring in bsp pages.
thanks
Edited by: Vijay Babu Dudla on Mar 23, 2009 7:35 AM

Hello Friend,
Vijay is correct.
REQUEST is a system object available in runtime of BSP application.
It is the object of interface IF_HTTP_REQUEST.
Use methof REQUEST -> GET_FORM_DATA( )
Regards
Krishnendu

How to Retrieve data from Variant Table

Can anyone help me by telling how to retrieve data from variant table which was created by user. I am able to see data of variant table only thru cu60 transaction but not se11. I s there any function module to do this?

Hello Mohan,
if u already have data and u want to populate it in F4 help then use below code -
u Have to make use of FM - 'F4IF_INT_TABLE_VALUE_REQUEST'
REPORT ZGILL_VALUE_REQUEST                     .
data: begin of lt_all occurs 0.
        include structure DYNPREAD.
data end of lt_all.
data: begin of lt_selected occurs 0.
       include structure DDSHRETVAL.
data: end of lt_selected.
DATA: BEGIN OF lt_code OCCURS 0,
            code LIKE zgill_main-PERNR,
      END OF lt_code.
data no_dyn like sy-dynnr.
Parameters : ECODE like zgill_main-PERNR.
*parameters: pernr like pa0001-pernr .
no_dyn = sy-dynnr.   "give the scren no directly or sy-dynnr in case of report.
At selection-screen on value-request for ECODE.
select PERNR into table lt_code from zgill_main.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
        retfield               = 'ECODE'
        dynpprog               = sy-repid
       dynpnr                  = no_dyn
      dynprofield              =       'ECODE'
      window_title           = 'Employee Details'
       value_org              = 'S'
      DISPLAY                = 'F'
   TABLES
        value_tab             = lt_code
       RETURN_TAB             = lt_selected.
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
*if sy-subrc eq '0' .
write: 'success'.
*endif.
read   table lt_selected index sy-tabix.
move lt_selected-fieldval to ECODE.

How to retrieve data from domain(Value Range) of the table

hi
how to retrieve data from domain(Value Range) of the table
thanks

Hello,
You can try using the FM: DOMAIN_VALUE_GET TB_DOMAINVALUES_GET.
BR,
Suhas
Edited by: Suhas Saha on Mar 24, 2009 10:08 AM

How to retrieve data from excel sheet

Hi,
How to retrieve data from excel sheet into a java file.

janu05 wrote:
If we append a $ in the end of the table name it is showing an error saying "invalid name,should not contain any invalid character or punctuation"Great, I'm very happy for you.
Unless that was a question. In which case you might what to tell us a little more.
Like which API you are using (assuming we are still on "reading an Excel sheet".

How to retrieve data from catsdb table and convert into xml using BAPI

How to retrieve data from catsdb table and convert into xml using BAPI
Points will be rewarded,
Thank you,
Regards,
Jagrut BharatKumar Shukla

Hi,
This is not your requirment but u can try this :
CREATE OR REPLACE DIRECTORY text_file AS 'D:\TEXT_FILE\';
GRANT READ ON DIRECTORY text_file TO fah;
GRANT WRITE ON DIRECTORY text_file TO fah;
DROP TABLE load_a;
CREATE TABLE load_a
(a1 varchar2(20),
a2 varchar2(200))
ORGANIZATION EXTERNAL
(TYPE ORACLE_LOADER
DEFAULT DIRECTORY text_file
ACCESS PARAMETERS
(FIELDS TERMINATED BY ','
LOCATION ('data.txt')
select * from load_a;
CREATE TABLE A AS select * from load_a;
SELECT * FROM A
Regards
Faheem Latif

How to retrieve data from table(BOM_ITEM)

Hi All,
I wrote webservices using axis1.4 to get BOM information from SAP.. funtional module is CAD_DISPLAY_BOM_WITH_SUB_ITEMS
webservices works fine..I'am able to retrieve data from Export Parameter..But not able to retrieve data from table
How to retrieve data from table(BOM_ITEM)..?
Cheers, all help would be greatly appreciated
Vijay

Hi,
1. Create Page Process.
2. Select Data Manipulation
3. In category select "Automated Row Fetch"
4. Specify process name, sequence, select "On Load - Before Header" in point.
5. Specify owner, table, primary key, and the primary key column(Item name contains primary key).
6. Create a process.
7. In each item select "Database Column" in "Source Type".
Regards,
Kartik Patel
http://patelkartik.blogspot.com/
http://apex.oracle.com/pls/apex/f?p=9904351712:1

How to retrieve data from MDM using java API

hi experts
Please explain me the step by step procedure
how to retrieve data from MDM using java API
and please tell me what are the
important classes and packages in MDM Java API
thanks
ramu

Hi Ramchandra,
You can refer to following links
MDM Java API-pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2d18d355-0601-0010-fdbb-d8b143420f49
webinr of java API
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/89243c32-0601-0010-559d-80d5b0884d67
Following Fourm Threads will also help.
Java API
Java API
Re: usage of java API ,
Matching Record
Need Java API for Matching Record
Thanks and Regards,
Shruti.
Edited by: Shruti Shah on Jul 16, 2008 12:35 PM

Query to retrieve data from action infotype based on particular actiontype

Hi folks,
I need some help in retrieving data from infotype 0000.
The records for a certain employee id (10035532) for action infotype are as follows.. I trying to retireve the LOA action records
   BEGDA-ENDDA-MASSN-MASSG
1. 04/01/2008 - 12/31/9999 - Z7(RLOA) - 02(FMLA).
2. 03/01/2008 - 03/31/2008 - ZB - 03.
3. 02/10/2008 - 02/29/2008 - Z2 - 05
4. 01/20/2008 - 02/09/2008 - ZB - 07
5 01/05/2008 - 01/19/2008 - Z5(Paid LOA) - 05(FMLA)
I have to retrieve the Z5 record for this employee. For every Z7 there is a corresponding Z5 record that links to the LOA records, in most cases the Z5 is immediately followed by Z7 record. I am able to retrieve such records successfully. However for few employees like one here the Z5 record is the fourth or fifth record down from the Z7. How can i retrieve the record in such a case?
Also in some cases the date ranges are missing in between, in such cases can we retirieve data succesfully? For ex:
1. 04/01/2008 - 12/31/9999 - Z7(RLOA) - 02(FMLA).
2. 03/01/2008 - 03/31/2008 - ZB - 03.
3. 02/10/2008 -                   - Z2 - 05
4. 01/20/2008 -                   - ZB - 07
5 *01/05/2008 - 01/19/2008 - Z5(Paid LOA) - 05(FMLA)
Need some inputs on the query here.
Thanks in advance,
VG

No responses. The thread is closed.
VG

How to retrieve data from a jsp page

I have created a page with some text boxes, file, submit button. In my Ist jsp, i am dynamically add Text boxes and File (for Uploading).
In the 2nd jsp, i am used Jakarata FileUpload API. I am able to retrieve all data and files except that value of dynamicall added text boxes. That is, I cannot retrieve data from dynamically added text boxes.
Using Jakarata FileUpload API, i can retrieve values of form data using
getString() method.
I want to know that there is any way or method for retrieving form data values into String Array.
regards
madhu
[email protected]

Use parseRequest(request) to get the file information as you already are doing. However, I dont know how you can use request.getParameter("textField1") to get the other fields from the page. My work-around is as follows:
Change your submit button to an ordinary button and add an onClick event to it. Then in the javascript function that supports the onClick, add the textField1 as follows:
<form name="fileUploadForm" method="post" action="someAction" (((more code code here)))))
function submitButtonClick(){
document.fileUploadForm.action=
document.fileUploadForm.action+
"?textField1="+document.fileUploadForm.textField1.value"+
"&textField2="+document.fileUploadForm.textField2.value"+
"&textField3="+document.fileUploadForm.textField3.value";
document.fileUploadForm.submit();
As you can see in the above code, I append the textField1 name/value pair to the end of the action. Now in the server, you can use getParameter("textField1");

How to retrieve data from a web service

Hi
i am at very beginner level about web services.
I am searching for a simple example of retrieving data from a web services, but cant find.
How can i get xml data from a web service. i dont need to develop the web service it is already ready, i just need how could i fetch data from it.
Can somebody point out or give an example?
Thanks in advance

Hi,
just create a skeleton for the Web Service. In JDeveloper, create a new project and then use the "NEW" context menu option.
Navigate to "Business Tier" --> Web Services and select "Web Service Proxy"
In teh following, provide the WSDL reference to create the Java proxy. This gives you accss to the WS without having to parse the XML yourself
Frank

How to retrieve data from a read-only Excel file

Hi Developers,
I'm trying to retrieve data from a read-only Excel file. I used the same code that I used to retrieve data from a normal Excel file, but it can't work.
My code is as followed:
try
InputStream KpExcel = new FileInputStream("kp.xls");
HSSFWorkbook Kpwb = new HSSFWorkbook(KpExcel);
HSSFSheet Kpsheet = Kpwb.getSheetAt(0);
catch(Exception e)
e.printStackTrace();
System.out.println("Exception: "+e.getMessage());
The error I received is as followed:
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at org.apache.poi.hssf.record.RecordFactory.createRecord(RecordFactory.java:224)
at org.apache.poi.hssf.record.RecordFactory.createRecords(RecordFactory.java:160)
at org.apache.poi.hssf.usermodel.HSSFWorkbook.<init>(HSSFWorkbook.java:163)
at org.apache.poi.hssf.usermodel.HSSFWorkbook.<init>(HSSFWorkbook.java:210)
at org.apache.poi.hssf.usermodel.HSSFWorkbook.<init>(HSSFWorkbook.java:191)
at photoproductionsystem.IncomingWIPPanel.getKp(IncomingWIPPanel.java:118)
at photoproductionsystem.IncomingWIPPanel.<init>(IncomingWIPPanel.java:76)
at photoproductionsystem.TabbedDisplay.<init>(TabbedDisplay.java:47)
at photoproductionsystem.Display.create(Display.java:73)
at photoproductionsystem.Display.init(Display.java:44)
at photoproductionsystem.Display.main(Display.java:229)
Caused by: java.lang.ArrayIndexOutOfBoundsException
at java.lang.System.arraycopy(Native Method)
at org.apache.poi.hssf.record.UnknownRecord.<init>(UnknownRecord.java:62)
at org.apache.poi.hssf.record.SubRecord.createSubRecord(SubRecord.java:57)
at org.apache.poi.hssf.record.ObjRecord.fillFields(ObjRecord.java:99)
at org.apache.poi.hssf.record.Record.fillFields(Record.java:90)
at org.apache.poi.hssf.record.Record.<init>(Record.java:55)
at org.apache.poi.hssf.record.ObjRecord.<init>(ObjRecord.java:61)
... 15 more
Can someone please help me with my problem? Thanks a lot in advance!

Madeline wrote:
how do I ask at Apache mailing list?I wonder why it seems to be a strange idea to some people to look at the software vendor's site for product support. :p
http://poi.apache.org/mailinglists.html

How to retrieve data from a MSSQL?

Dear All,
How can I retrieve data from a MSSQL server in my custom iView which is developed by Eclipse?
Thanks
Sam

Hi Sam,
you have a bunch of possibilities... (and they do not really differ from accessing a DB from within any J2EE app).
You can use a direct connection, setting Database, port, user, ... within your component.
Or you can set all these things within VisualAdmin and then reference the DataSource via JNDI from within your component.
You can directly use SQL.
Or you can use ObjectRelationalMappers like Hibernate...
Any more questions?
Hope it helps
Detlev

How to retrieve data from a field of CLOB datatype?

How can I retrieve data from a field of CLOB datatype in Oracle
8 being called from an ASP or VB application? The recordset
object in ASP or VB doesn't support the CLOB datatype.
Thank you in advance for your help.

How can I retrieve data from a field of CLOB datatype in Oracle
8 being called from an ASP or VB application? The recordset
object in ASP or VB doesn't support the CLOB datatype.
Thank you in advance for your help. Hello.. were you able to solve your problem? I'm faced with pretty much the same task.. I have a VBA application that needs to pull various pieces of data(CLOBs, BLOBs, etc..) from an Oracle8i db.

How to retrieve data from virtual infotype?

Similar Messages

Maybe you are looking for